========== Nim Manual ========== :Authors: Andreas Rumpf, Zahary Karadjov :Version: |nimversion| .. default-role:: code .. include:: rstcommon.rst .. contents:: > "Complexity" seems to be a lot like "energy": you can transfer it from the > end-user to one/some of the other players, but the total amount seems to remain > pretty much constant for a given task. -- Ran About this document =================== **Note**: This document is a draft! Several of Nim's features may need more precise wording. This manual is constantly evolving into a proper specification. **Note**: The experimental features of Nim are covered [here](manual_experimental.html). **Note**: Assignments, moves, and destruction are specified in the [destructors](destructors.html) document. This document describes the lexis, the syntax, and the semantics of the Nim language. To learn how to compile Nim programs and generate documentation see the [Compiler User Guide](nimc.html) and the [DocGen Tools Guide](docgen.html). The language constructs are explained using an extended BNF, in which `(a)*` means 0 or more `a`'s, `a+` means 1 or more `a`'s, and `(a)?` means an optional *a*. Parentheses may be used to group elements. `&` is the lookahead operator; `&a` means that an `a` is expected but not consumed. It will be consumed in the following rule. The `|`, `/` symbols are used to mark alternatives and have the lowest precedence. `/` is the ordered choice that requires the parser to try the alternatives in the given order. `/` is often used to ensure the grammar is not ambiguous. Non-terminals start with a lowercase letter, abstract terminal symbols are in UPPERCASE. Verbatim terminal symbols (including keywords) are quoted with `'`. An example: ifStmt = 'if' expr ':' stmts ('elif' expr ':' stmts)* ('else' stmts)? The binary `^*` operator is used as a shorthand for 0 or more occurrences separated by its second argument; likewise `^+` means 1 or more occurrences: `a ^+ b` is short for `a (b a)*` and `a ^* b` is short for `(a (b a)*)?`. Example: arrayConstructor = '[' expr ^* ',' ']' Other parts of Nim, like scoping rules or runtime semantics, are described informally. Definitions =========== Nim code specifies a computation that acts on a memory consisting of components called `locations`:idx:. A variable is basically a name for a location. Each variable and location is of a certain `type`:idx:. The variable's type is called `static type`:idx:, the location's type is called `dynamic type`:idx:. If the static type is not the same as the dynamic type, it is a super-type or subtype of the dynamic type. An `identifier`:idx: is a symbol declared as a name for a variable, type, procedure, etc. The region of the program over which a declaration applies is called the `scope`:idx: of the declaration. Scopes can be nested. The meaning of an identifier is determined by the smallest enclosing scope in which the identifier is declared unless overloading resolution rules suggest otherwise. An expression specifies a computation that produces a value or location. Expressions that produce locations are called `l-values`:idx:. An l-value can denote either a location or the value the location contains, depending on the context. A Nim `program`:idx: consists of one or more text `source files`:idx: containing Nim code. It is processed by a Nim `compiler`:idx: into an `executable`:idx:. The nature of this executable depends on the compiler implementation; it may, for example, be a native binary or JavaScript source code. In a typical Nim program, most of the code is compiled into the executable. However, some code may be executed at `compile-time`:idx:. This can include constant expressions, macro definitions, and Nim procedures used by macro definitions. Most of the Nim language is supported at compile-time, but there are some restrictions -- see [Restrictions on Compile-Time Execution] for details. We use the term `runtime`:idx: to cover both compile-time execution and code execution in the executable. The compiler parses Nim source code into an internal data structure called the `abstract syntax tree`:idx: (`AST`:idx:). Then, before executing the code or compiling it into the executable, it transforms the AST through `semantic analysis`:idx:. This adds semantic information such as expression types, identifier meanings, and in some cases expression values. An error detected during semantic analysis is called a `static error`:idx:. Errors described in this manual are static errors when not otherwise specified. A `panic`:idx: is an error that the implementation detects and reports at runtime. The method for reporting such errors is via *raising exceptions* or *dying with a fatal error*. However, the implementation provides a means to disable these `runtime checks`:idx:. See the section [Pragmas] for details. Whether a panic results in an exception or in a fatal error is implementation specific. Thus, the following program is invalid; even though the code purports to catch the `IndexDefect` from an out-of-bounds array access, the compiler may instead choose to allow the program to die with a fatal error. ```nim var a: array[0..1, char] let i = 5 try: a[i] = 'N' except IndexDefect: echo "invalid index" ``` The current implementation allows switching between these different behaviors via `--panics:on|off`:option:. When panics are turned on, the program dies with a panic, if they are turned off the runtime errors are turned into exceptions. The benefit of `--panics:on`:option: is that it produces smaller binary code and the compiler has more freedom to optimize the code. An `unchecked runtime error`:idx: is an error that is not guaranteed to be detected and can cause the subsequent behavior of the computation to be arbitrary. Unchecked runtime errors cannot occur if only `safe`:idx: language features are used and if no runtime checks are disabled. A `constant expression`:idx: is an expression whose value can be computed during a semantic analysis of the code in which it appears. It is never an l-value and never has side effects. Constant expressions are not limited to the capabilities of semantic analysis, such as constant folding; they can use all Nim language features that are supported for compile-time execution. Since constant expressions can be used as an input to semantic analysis (such as for defining array bounds), this flexibility requires the compiler to interleave semantic analysis and compile-time code execution. It is mostly accurate to picture semantic analysis proceeding top to bottom and left to right in the source code, with compile-time code execution interleaved when necessary to compute values that are required for subsequent semantic analysis. We will see much later in this document that macro invocation not only requires this interleaving, but also creates a situation where semantic analysis does not entirely proceed top to bottom and left to right. Lexical Analysis ================ Encoding -------- All Nim source files are in the UTF-8 encoding (or its ASCII subset). Other encodings are not supported. Any of the standard platform line termination sequences can be used - the Unix form using ASCII LF (linefeed), the Windows form using the ASCII sequence CR LF (return followed by linefeed), or the old Macintosh form using the ASCII CR (return) character. All of these forms can be used equally, regardless of the platform. Indentation ----------- Nim's standard grammar describes an `indentation sensitive`:idx: language. This means that all the control structures are recognized by indentation. Indentation consists only of spaces; tabulators are not allowed. The indentation handling is implemented as follows: The lexer annotates the following token with the preceding number of spaces; indentation is not a separate token. This trick allows parsing of Nim with only 1 token of lookahead. The parser uses a stack of indentation levels: the stack consists of integers counting the spaces. The indentation information is queried at strategic places in the parser but ignored otherwise: The pseudo-terminal `IND{>}` denotes an indentation that consists of more spaces than the entry at the top of the stack; `IND{=}` an indentation that has the same number of spaces. `DED` is another pseudo terminal that describes the *action* of popping a value from the stack, `IND{>}` then implies to push onto the stack. With this notation we can now easily define the core of the grammar: A block of statements (simplified example): ifStmt = 'if' expr ':' stmt (IND{=} 'elif' expr ':' stmt)* (IND{=} 'else' ':' stmt)? simpleStmt = ifStmt / ... stmt = IND{>} stmt ^+ IND{=} DED # list of statements / simpleStmt # or a simple statement Comments -------- Comments start anywhere outside a string or character literal with the hash character `#`. Comments consist of a concatenation of `comment pieces`:idx:. A comment piece starts with `#` and runs until the end of the line. The end of line characters belong to the piece. If the next line only consists of a comment piece with no other tokens between it and the preceding one, it does not start a new comment: ```nim i = 0 # This is a single comment over multiple lines. # The lexer merges these two pieces. # The comment continues here. ``` `Documentation comments`:idx: are comments that start with two `##`. Documentation comments are tokens; they are only allowed at certain places in the input file as they belong to the syntax tree. Multiline comments ------------------ Starting with version 0.13.0 of the language Nim supports multiline comments. They look like: ```nim #[Comment here. Multiple lines are not a problem.]# ``` Multiline comments support nesting: ```nim #[ #[ Multiline comment in already commented out code. ]# proc p[T](x: T) = discard ]# ``` Multiline documentation comments also exist and support nesting too: ```nim proc foo = ##[Long documentation comment here. ]## ``` You can also use the [discard statement](#statements-and-expressions-discard-statement) together with [triple quoted string literals](#lexical-analysis-triple-quoted-string-literals) to create multiline comments: ```nim discard """ You can have any Nim code text commented out inside this with no indentation restrictions. yes("May I ask a pointless question?") """ ``` This was how multiline comments were done before version 0.13.0, and it is used to provide specifications to [testament](testament.html#writing-unit-tests) test framework. Identifiers & Keywords ---------------------- Identifiers in Nim can be any string of letters, digits and underscores, with the following restrictions: * begins with a letter * does not end with an underscore `_` * two immediate following underscores `__` are not allowed: ``` letter ::= 'A'..'Z' | 'a'..'z' | '\x80'..'\xff' digit ::= '0'..'9' IDENTIFIER ::= letter ( ['_'] (letter | digit) )* ``` Currently, any Unicode character with an ordinal value > 127 (non-ASCII) is classified as a `letter` and may thus be part of an identifier but later versions of the language may assign some Unicode characters to belong to the operator characters instead. The following keywords are reserved and cannot be used as identifiers: ```nim file="keywords.txt" ``` Some keywords are unused; they are reserved for future developments of the language. Identifier equality ------------------- Two identifiers are considered equal if the following algorithm returns true: ```nim proc sameIdentifier(a, b: string): bool = a[0] == b[0] and a.replace("_", "").toLowerAscii == b.replace("_", "").toLowerAscii ``` That means only the first letters are compared in a case-sensitive manner. Other letters are compared case-insensitively within the ASCII range and underscores are ignored. This rather unorthodox way to do identifier comparisons is called `partial case-insensitivity`:idx: and has some advantages over the conventional case sensitivity: It allows programmers to mostly use their own preferred spelling style, be it humpStyle or snake_style, and libraries written by different programmers cannot use incompatible conventions. A Nim-aware editor or IDE can show the identifiers as preferred. Another advantage is that it frees the programmer from remembering the exact spelling of an identifier. The exception with respect to the first letter allows common code like `var foo: Foo` to be parsed unambiguously. Note that this rule also applies to keywords, meaning that `notin` is the same as `notIn` and `not_in` (all-lowercase version (`notin`, `isnot`) is the preferred way of writing keywords). Historically, Nim was a fully `style-insensitive`:idx: language. This meant that it was not case-sensitive and underscores were ignored and there was not even a distinction between `foo` and `Foo`. Keywords as identifiers ----------------------- If a keyword is enclosed in backticks it loses its keyword property and becomes an ordinary identifier. Examples ```nim var `var` = "Hello Stropping" ``` ```nim type Obj = object `type`: int let `object` = Obj(`type`: 9) assert `object` is Obj assert `object`.`type` == 9 var `var` = 42 let `let` = 8 assert `var` + `let` == 50 const `assert` = true assert `assert` ``` String literals --------------- Terminal symbol in the grammar: `STR_LIT`. String literals can be delimited by matching double quotes, and can contain the following `escape sequences`:idx:\ : ================== =================================================== Escape sequence Meaning ================== =================================================== ``\p`` platform specific newline: CRLF on Windows, LF on Unix ``\r``, ``\c`` `carriage return`:idx: ``\n``, ``\l`` `line feed`:idx: (often called `newline`:idx:) ``\f`` `form feed`:idx: ``\t`` `tabulator`:idx: ``\v`` `vertical tabulator`:idx: ``\\`` `backslash`:idx: ``\"`` `quotation mark`:idx: ``\'`` `apostrophe`:idx: ``\`` '0'..'9'+ `character with decimal value d`:idx:; all decimal digits directly following are used for the character ``\a`` `alert`:idx: ``\b`` `backspace`:idx: ``\e`` `escape`:idx: `[ESC]`:idx: ``\x`` HH `character with hex value HH`:idx:; exactly two hex digits are allowed ``\u`` HHHH `unicode codepoint with hex value HHHH`:idx:; exactly four hex digits are allowed ``\u`` {H+} `unicode codepoint`:idx:; all hex digits enclosed in `{}` are used for the codepoint ================== =================================================== Strings in Nim may contain any 8-bit value, even embedded zeros. However, some operations may interpret the first binary zero as a terminator. Triple quoted string literals ----------------------------- Terminal symbol in the grammar: `TRIPLESTR_LIT`. String literals can also be delimited by three double quotes `"""` ... `"""`. Literals in this form may run for several lines, may contain `"` and do not interpret any escape sequences. For convenience, when the opening `"""` is followed by a newline (there may be whitespace between the opening `"""` and the newline), the newline (and the preceding whitespace) is not included in the string. The ending of the string literal is defined by the pattern `"""[^"]`, so this: ```nim """"long string within quotes"""" ``` Produces: "long string within quotes" Raw string literals ------------------- Terminal symbol in the grammar: `RSTR_LIT`. There are also raw string literals that are preceded with the letter `r` (or `R`) and are delimited by matching double quotes (just like ordinary string literals) and do not interpret the escape sequences. This is especially convenient for regular expressions or Windows paths: ```nim var f = openFile(r"C:\texts\text.txt") # a raw string, so ``\t`` is no tab ``` To produce a single `"` within a raw string literal, it has to be doubled: ```nim r"a""b" ``` Produces: a"b `r""""` is not possible with this notation, because the three leading quotes introduce a triple quoted string literal. `r"""` is the same as `"""` since triple quoted string literals do not interpret escape sequences either. Generalized raw string literals ------------------------------- Terminal symbols in the grammar: `GENERALIZED_STR_LIT`, `GENERALIZED_TRIPLESTR_LIT`. The construct `identifier"string literal"` (without whitespace between the identifier and the opening quotation mark) is a generalized raw string literal. It is a shortcut for the construct `identifier(r"string literal")`, so it denotes a routine call with a raw string literal as its only argument. Generalized raw string literals are especially convenient for embedding mini languages directly into Nim (for example regular expressions). The construct `identifier"""string literal"""` exists too. It is a shortcut for `identifier("""string literal""")`. Character literals ------------------ Character literals are enclosed in single quotes `''` and can contain the same escape sequences as strings - with one exception: the platform dependent `newline`:idx: (``\p``) is not allowed as it may be wider than one character (it can be the pair CR/LF). Here are the valid `escape sequences`:idx: for character literals: ================== =================================================== Escape sequence Meaning ================== =================================================== ``\r``, ``\c`` `carriage return`:idx: ``\n``, ``\l`` `line feed`:idx: ``\f`` `form feed`:idx: ``\t`` `tabulator`:idx: ``\v`` `vertical tabulator`:idx: ``\\`` `backslash`:idx: ``\"`` `quotation mark`:idx: ``\'`` `apostrophe`:idx: ``\`` '0'..'9'+ `character with decimal value d`:idx:; all decimal digits directly following are used for the character ``\a`` `alert`:idx: ``\b`` `backspace`:idx: ``\e`` `escape`:idx: `[ESC]`:idx: ``\x`` HH `character with hex value HH`:idx:; exactly two hex digits are allowed ================== =================================================== A character is not a Unicode character but a single byte. Rationale: It enables the efficient support of `array[char, int]` or `set[char]`. The `Rune` type can represent any Unicode character. `Rune` is declared in the [unicode module](unicode.html). A character literal that does not end in `'` is interpreted as `'` if there is a preceding backtick token. There must be no whitespace between the preceding backtick token and the character literal. This special case ensures that a declaration like ``proc `'customLiteral`(s: string)`` is valid. ``proc `'customLiteral`(s: string)`` is the same as ``proc `'\''customLiteral`(s: string)``. See also [custom numeric literals]. Numeric literals ---------------- Numeric literals have the form: hexdigit = digit | 'A'..'F' | 'a'..'f' octdigit = '0'..'7' bindigit = '0'..'1' unary_minus = '-' # See the section about unary minus HEX_LIT = unary_minus? '0' ('x' | 'X' ) hexdigit ( ['_'] hexdigit )* DEC_LIT = unary_minus? digit ( ['_'] digit )* OCT_LIT = unary_minus? '0' 'o' octdigit ( ['_'] octdigit )* BIN_LIT = unary_minus? '0' ('b' | 'B' ) bindigit ( ['_'] bindigit )* INT_LIT = HEX_LIT | DEC_LIT | OCT_LIT | BIN_LIT INT8_LIT = INT_LIT ['\''] ('i' | 'I') '8' INT16_LIT = INT_LIT ['\''] ('i' | 'I') '16' INT32_LIT = INT_LIT ['\''] ('i' | 'I') '32' INT64_LIT = INT_LIT ['\''] ('i' | 'I') '64' UINT_LIT = INT_LIT ['\''] ('u' | 'U') UINT8_LIT = INT_LIT ['\''] ('u' | 'U') '8' UINT16_LIT = INT_LIT ['\''] ('u' | 'U') '16' UINT32_LIT = INT_LIT ['\''] ('u' | 'U') '32' UINT64_LIT = INT_LIT ['\''] ('u' | 'U') '64' exponent = ('e' | 'E' ) ['+' | '-'] digit ( ['_'] digit )* FLOAT_LIT = unary_minus? digit (['_'] digit)* (('.' digit (['_'] digit)* [exponent]) |exponent) FLOAT32_SUFFIX = ('f' | 'F') ['32'] FLOAT32_LIT = HEX_LIT '\'' FLOAT32_SUFFIX | (FLOAT_LIT | DEC_LIT | OCT_LIT | BIN_LIT) ['\''] FLOAT32_SUFFIX FLOAT64_SUFFIX = ( ('f' | 'F') '64' ) | 'd' | 'D' FLOAT64_LIT = HEX_LIT '\'' FLOAT64_SUFFIX | (FLOAT_LIT | DEC_LIT | OCT_LIT | BIN_LIT) ['\''] FLOAT64_SUFFIX CUSTOM_NUMERIC_LIT = (FLOAT_LIT | INT_LIT) '\'' CUSTOM_NUMERIC_SUFFIX # CUSTOM_NUMERIC_SUFFIX is any Nim identifier that is not # a pre-defined type suffix. As can be seen in the productions, numeric literals can contain underscores for readability. Integer and floating-point literals may be given in decimal (no prefix), binary (prefix `0b`), octal (prefix `0o`), and hexadecimal (prefix `0x`) notation. The fact that the unary minus `-` in a number literal like `-1` is considered to be part of the literal is a late addition to the language. The rationale is that an expression `-128'i8` should be valid and without this special case, this would be impossible -- `128` is not a valid `int8` value, only `-128` is. For the `unary_minus` rule there are further restrictions that are not covered in the formal grammar. For `-` to be part of the number literal the immediately preceding character has to be in the set `{' ', '\t', '\n', '\r', ',', ';', '(', '[', '{'}`. This set was designed to cover most cases in a natural manner. In the following examples, `-1` is a single token: ```nim echo -1 echo(-1) echo [-1] echo 3,-1 "abc";-1 ``` In the following examples, `-1` is parsed as two separate tokens (as `-`:tok: `1`:tok:): ```nim echo x-1 echo (int)-1 echo [a]-1 "abc"-1 ``` The suffix starting with an apostrophe ('\'') is called a `type suffix`:idx:. Literals without a type suffix are of an integer type unless the literal contains a dot or `E|e` in which case it is of type `float`. This integer type is `int` if the literal is in the range `low(int32)..high(int32)`, otherwise it is `int64`. For notational convenience, the apostrophe of a type suffix is optional if it is not ambiguous (only hexadecimal floating-point literals with a type suffix can be ambiguous). The pre-defined type suffixes are: ================= ========================= Type Suffix Resulting type of literal ================= ========================= `'i8` int8 `'i16` int16 `'i32` int32 `'i64` int64 `'u` uint `'u8` uint8 `'u16` uint16 `'u32` uint32 `'u64` uint64 `'f` float32 `'d` float64 `'f32` float32 `'f64` float64 ================= ========================= Floating-point literals may also be in binary, octal or hexadecimal notation: `0B0_10001110100_0000101001000111101011101111111011000101001101001001'f64` is approximately 1.72826e35 according to the IEEE floating-point standard. Literals must match the datatype, for example, `333'i8` is an invalid literal. Non-base-10 literals are used mainly for flags and bit pattern representations, therefore the checking is done on bit width and not on value range. Hence: 0b10000000'u8 == 0x80'u8 == 128, but, 0b10000000'i8 == 0x80'i8 == -1 instead of causing an overflow error. ### Custom numeric literals If the suffix is not predefined, then the suffix is assumed to be a call to a proc, template, macro or other callable identifier that is passed the string containing the literal. The callable identifier needs to be declared with a special ``'`` prefix: ```nim import std/strutils type u4 = distinct uint8 # a 4-bit unsigned integer aka "nibble" proc `'u4`(n: string): u4 = # The leading ' is required. result = (parseInt(n) and 0x0F).u4 var x = 5'u4 ``` More formally, a custom numeric literal `123'custom` is transformed to r"123".`'custom` in the parsing step. There is no AST node kind that corresponds to this transformation. The transformation naturally handles the case that additional parameters are passed to the callee: ```nim import std/strutils type u4 = distinct uint8 # a 4-bit unsigned integer aka "nibble" proc `'u4`(n: string; moreData: int): u4 = result = (parseInt(n) and 0x0F).u4 var x = 5'u4(123) ``` Custom numeric literals are covered by the grammar rule named `CUSTOM_NUMERIC_LIT`. A custom numeric literal is a single token. Operators --------- Nim allows user defined operators. An operator is any combination of the following characters: = + - * / < > @ $ ~ & % | ! ? ^ . : \ (The grammar uses the terminal OPR to refer to operator symbols as defined here.) These keywords are also operators: `and or not xor shl shr div mod in notin is isnot of as from`. `.`:tok:, `=`:tok:, `:`:tok:, `::`:tok: are not available as general operators; they are used for other notational purposes. `*:` is as a special case treated as the two tokens `*`:tok: and `:`:tok: (to support `var v*: T`). The `not` keyword is always a unary operator, `a not b` is parsed as `a(not b)`, not as `(a) not (b)`. Unicode Operators ----------------- These Unicode operators are also parsed as operators: ∙ ∘ × ★ ⊗ ⊘ ⊙ ⊛ ⊠ ⊡ ∩ ∧ ⊓ # same priority as * (multiplication) ± ⊕ ⊖ ⊞ ⊟ ∪ ∨ ⊔ # same priority as + (addition) Unicode operators can be combined with non-Unicode operator symbols. The usual precedence extensions then apply, for example, `⊠=` is an assignment like operator just like `*=` is. No Unicode normalization step is performed. Other tokens ------------ The following strings denote other tokens: ` ( ) { } [ ] , ; [. .] {. .} (. .) [: The `slice`:idx: operator `..`:tok: takes precedence over other tokens that contain a dot: `{..}` are the three tokens `{`:tok:, `..`:tok:, `}`:tok: and not the two tokens `{.`:tok:, `.}`:tok:. Syntax ====== This section lists Nim's standard syntax. How the parser handles the indentation is already described in the [Lexical Analysis] section. Nim allows user-definable operators. Binary operators have 11 different levels of precedence. Associativity ------------- Binary operators whose first character is `^` are right-associative, all other binary operators are left-associative. ```nim proc `^/`(x, y: float): float = # a right-associative division operator result = x / y echo 12 ^/ 4 ^/ 8 # 24.0 (4 / 8 = 0.5, then 12 / 0.5 = 24.0) echo 12 / 4 / 8 # 0.375 (12 / 4 = 3.0, then 3 / 8 = 0.375) ``` Precedence ---------- Unary operators always bind stronger than any binary operator: `$a + b` is `($a) + b` and not `$(a + b)`. If a unary operator's first character is `@` it is a `sigil-like`:idx: operator which binds stronger than a `primarySuffix`: `@x.abc` is parsed as `(@x).abc` whereas `$x.abc` is parsed as `$(x.abc)`. For binary operators that are not keywords, the precedence is determined by the following rules: Operators ending in either `->`, `~>` or `=>` are called `arrow like`:idx:, and have the lowest precedence of all operators. If the operator ends with `=` and its first character is none of `<`, `>`, `!`, `=`, `~`, `?`, it is an *assignment operator* which has the second-lowest precedence. Otherwise, precedence is determined by the first character. ================ ======================================================= ================== =============== Precedence level Operators First character Terminal symbol ================ ======================================================= ================== =============== 10 (highest) `$ ^` OP10 9 `* / div mod shl shr %` `* % \ /` OP9 8 `+ -` `+ - ~ |` OP8 7 `&` `&` OP7 6 `..` `.` OP6 5 `== <= < >= > != in notin is isnot not of as from` `= < > !` OP5 4 `and` OP4 3 `or xor` OP3 2 `@ : ?` OP2 1 *assignment operator* (like `+=`, `*=`) OP1 0 (lowest) *arrow like operator* (like `->`, `=>`) OP0 ================ ======================================================= ================== =============== Whether an operator is used as a prefix operator is also affected by preceding whitespace (this parsing change was introduced with version 0.13.0): ```nim echo $foo # is parsed as echo($foo) ``` Spacing also determines whether `(a, b)` is parsed as an argument list of a call or whether it is parsed as a tuple constructor: ```nim echo(1, 2) # pass 1 and 2 to echo ``` ```nim echo (1, 2) # pass the tuple (1, 2) to echo ``` Dot-like operators ------------------ Terminal symbol in the grammar: `DOTLIKEOP`. Dot-like operators are operators starting with `.`, but not with `..`, for e.g. `.?`; they have the same precedence as `.`, so that `a.?b.c` is parsed as `(a.?b).c` instead of `a.?(b.c)`. Grammar ------- The grammar's start symbol is `module`. .. include:: grammar.txt :literal: Order of evaluation =================== Order of evaluation is strictly left-to-right, inside-out as it is typical for most others imperative programming languages: ```nim test = "nim c $1" var s = "" proc p(arg: int): int = s.add $arg result = arg discard p(p(1) + p(2)) doAssert s == "123" ``` Assignments are not special, the left-hand-side expression is evaluated before the right-hand side: ```nim test = "nim c $1" var v = 0 proc getI(): int = result = v inc v var a, b: array[0..2, int] proc someCopy(a: var int; b: int) = a = b a[getI()] = getI() doAssert a == [1, 0, 0] v = 0 someCopy(b[getI()], getI()) doAssert b == [1, 0, 0] ``` Rationale: Consistency with overloaded assignment or assignment-like operations, `a = b` can be read as `performSomeCopy(a, b)`. However, the concept of "order of evaluation" is only applicable after the code was normalized: The normalization involves template expansions and argument reorderings that have been passed to named parameters: ```nim test = "nim c $1" var s = "" proc p(): int = s.add "p" result = 5 proc q(): int = s.add "q" result = 3 # Evaluation order is 'b' before 'a' due to template # expansion's semantics. template swapArgs(a, b): untyped = b + a doAssert swapArgs(p() + q(), q() - p()) == 6 doAssert s == "qppq" # Evaluation order is not influenced by named parameters: proc construct(first, second: int) = discard # 'p' is evaluated before 'q'! construct(second = q(), first = p()) doAssert s == "qppqpq" ``` Rationale: This is far easier to implement than hypothetical alternatives. Constants and Constant Expressions ================================== A `constant`:idx: is a symbol that is bound to the value of a constant expression. Constant expressions are restricted to depend only on the following categories of values and operations, because these are either built into the language or declared and evaluated before semantic analysis of the constant expression: * literals * built-in operators * previously declared constants and compile-time variables * previously declared macros and templates * previously declared procedures that have no side effects beyond possibly modifying compile-time variables A constant expression can contain code blocks that may internally use all Nim features supported at compile time (as detailed in the next section below). Within such a code block, it is possible to declare variables and then later read and update them, or declare variables and pass them to procedures that modify them. However, the code in such a block must still adhere to the restrictions listed above for referencing values and operations outside the block. The ability to access and modify compile-time variables adds flexibility to constant expressions that may be surprising to those coming from other statically typed languages. For example, the following code echoes the beginning of the Fibonacci series **at compile-time**. (This is a demonstration of flexibility in defining constants, not a recommended style for solving this problem.) ```nim test = "nim c $1" import std/strformat var fibN {.compileTime.}: int var fibPrev {.compileTime.}: int var fibPrevPrev {.compileTime.}: int proc nextFib(): int = result = if fibN < 2: fibN else: fibPrevPrev + fibPrev inc(fibN) fibPrevPrev = fibPrev fibPrev = result const f0 = nextFib() const f1 = nextFib() const displayFib = block: const f2 = nextFib() var result = fmt"Fibonacci sequence: {f0}, {f1}, {f2}" for i in 3..12: add(result, fmt", {nextFib()}") result static: echo displayFib ``` Restrictions on Compile-Time Execution ====================================== Nim code that will be executed at compile time cannot use the following language features: * methods * closure iterators * the `cast` operator * reference (pointer) types * FFI The use of wrappers that use FFI and/or `cast` is also disallowed. Note that these wrappers include the ones in the standard libraries. Some or all of these restrictions are likely to be lifted over time. Types ===== All expressions have a type that is known during semantic analysis. Nim is statically typed. One can declare new types, which is in essence defining an identifier that can be used to denote this custom type. These are the major type classes: * ordinal types (consist of integer, bool, character, enumeration (and subranges thereof) types) * floating-point types * string type * structured types * reference (pointer) type * procedural type * generic type Ordinal types ------------- Ordinal types have the following characteristics: - Ordinal types are countable and ordered. This property allows the operation of functions such as `inc`, `ord`, and `dec` on ordinal types to be defined. - Ordinal types have a smallest possible value, accessible with `low(type)`. Trying to count further down than the smallest value produces a panic or a static error. - Ordinal types have a largest possible value, accessible with `high(type)`. Trying to count further up than the largest value produces a panic or a static error. Integers, bool, characters, and enumeration types (and subranges of these types) belong to ordinal types. A distinct type is an ordinal type if its base type is an ordinal type. Pre-defined integer types ------------------------- These integer types are pre-defined: `int` : the generic signed integer type; its size is platform-dependent and has the same size as a pointer. This type should be used in general. An integer literal that has no type suffix is of this type if it is in the range `low(int32)..high(int32)` otherwise the literal's type is `int64`. `int`\ XX : additional signed integer types of XX bits use this naming scheme (example: int16 is a 16-bit wide integer). The current implementation supports `int8`, `int16`, `int32`, `int64`. Literals of these types have the suffix 'iXX. `uint` : the generic `unsigned integer`:idx: type; its size is platform-dependent and has the same size as a pointer. An integer literal with the type suffix `'u` is of this type. `uint`\ XX : additional unsigned integer types of XX bits use this naming scheme (example: uint16 is a 16-bit wide unsigned integer). The current implementation supports `uint8`, `uint16`, `uint32`, `uint64`. Literals of these types have the suffix 'uXX. Unsigned operations all wrap around; they cannot lead to over- or underflow errors. In addition to the usual arithmetic operators for signed and unsigned integers (`+ - *` etc.) there are also operators that formally work on *signed* integers but treat their arguments as *unsigned*: They are mostly provided for backwards compatibility with older versions of the language that lacked unsigned integer types. These unsigned operations for signed integers use the `%` suffix as convention: ====================== ====================================================== operation meaning ====================== ====================================================== `a +% b` unsigned integer addition `a -% b` unsigned integer subtraction `a *% b` unsigned integer multiplication `a /% b` unsigned integer division `a %% b` unsigned integer modulo operation `a <% b` treat `a` and `b` as unsigned and compare `a <=% b` treat `a` and `b` as unsigned and compare ====================== ====================================================== `Automatic type conversion`:idx: is performed in expressions where different kinds of integer types are used: the smaller type is converted to the larger. A `narrowing type conversion`:idx: converts a larger to a smaller type (for example `int32 -> int16`). A `widening type conversion`:idx: converts a smaller type to a larger type (for example `int16 -> int32`). In Nim only widening type conversions are *implicit*: ```nim var myInt16 = 5i16 var myInt: int myInt16 + 34 # of type `int16` myInt16 + myInt # of type `int` myInt16 + 2i32 # of type `int32` ``` However, `int` literals are implicitly convertible to a smaller integer type if the literal's value fits this smaller type and such a conversion is less expensive than other implicit conversions, so `myInt16 + 34` produces an `int16` result. For further details, see [Convertible relation]. Subrange types -------------- A subrange type is a range of values from an ordinal or floating-point type (the base type). To define a subrange type, one must specify its limiting values -- the lowest and highest value of the type. For example: ```nim type Subrange = range[0..5] PositiveFloat = range[0.0..Inf] Positive* = range[1..high(int)] # as defined in `system` ``` `Subrange` is a subrange of an integer which can only hold the values 0 to 5. `PositiveFloat` defines a subrange of all positive floating-point values. NaN does not belong to any subrange of floating-point types. Assigning any other value to a variable of type `Subrange` is a panic (or a static error if it can be determined during semantic analysis). Assignments from the base type to one of its subrange types (and vice versa) are allowed. A subrange type has the same size as its base type (`int` in the Subrange example). Pre-defined floating-point types -------------------------------- The following floating-point types are pre-defined: `float` : the generic floating-point type; its size used to be platform-dependent, but now it is always mapped to `float64`. This type should be used in general. `float`\ XX : an implementation may define additional floating-point types of XX bits using this naming scheme (example: `float64` is a 64-bit wide float). The current implementation supports `float32` and `float64`. Literals of these types have the suffix 'fXX. Automatic type conversion in expressions with different kinds of floating-point types is performed: See [Convertible relation] for further details. Arithmetic performed on floating-point types follows the IEEE standard. Integer types are not converted to floating-point types automatically and vice versa. The IEEE standard defines five types of floating-point exceptions: * Invalid: operations with mathematically invalid operands, for example 0.0/0.0, sqrt(-1.0), and log(-37.8). * Division by zero: divisor is zero and dividend is a finite nonzero number, for example 1.0/0.0. * Overflow: operation produces a result that exceeds the range of the exponent, for example MAXDOUBLE+0.0000000000001e308. * Underflow: operation produces a result that is too small to be represented as a normal number, for example, MINDOUBLE * MINDOUBLE. * Inexact: operation produces a result that cannot be represented with infinite precision, for example, 2.0 / 3.0, log(1.1) and 0.1 in input. The IEEE exceptions are either ignored during execution or mapped to the Nim exceptions: `FloatInvalidOpDefect`:idx:, `FloatDivByZeroDefect`:idx:, `FloatOverflowDefect`:idx:, `FloatUnderflowDefect`:idx:, and `FloatInexactDefect`:idx:. These exceptions inherit from the `FloatingPointDefect`:idx: base class. Nim provides the pragmas `nanChecks`:idx: and `infChecks`:idx: to control whether the IEEE exceptions are ignored or trap a Nim exception: ```nim {.nanChecks: on, infChecks: on.} var a = 1.0 var b = 0.0 echo b / b # raises FloatInvalidOpDefect echo a / b # raises FloatOverflowDefect ``` In the current implementation `FloatDivByZeroDefect` and `FloatInexactDefect` are never raised. `FloatOverflowDefect` is raised instead of `FloatDivByZeroDefect`. There is also a `floatChecks`:idx: pragma that is a short-cut for the combination of `nanChecks` and `infChecks` pragmas. `floatChecks` are turned off as default. The only operations that are affected by the `floatChecks` pragma are the `+`, `-`, `*`, `/` operators for floating-point types. An implementation should always use the maximum precision available to evaluate floating-point values during semantic analysis; this means expressions like `0.09'f32 + 0.01'f32 == 0.09'f64 + 0.01'f64` that are evaluating during constant folding are true. Boolean type ------------ The boolean type is named `bool`:idx: in Nim and can be one of the two pre-defined values `true` and `false`. Conditions in `while`, `if`, `elif`, `when`-statements need to be of type `bool`. This condition holds: ```nim ord(false) == 0 and ord(true) == 1 ``` The operators `not, and, or, xor, <, <=, >, >=, !=, ==` are defined for the bool type. The `and` and `or` operators perform short-cut evaluation. Example: ```nim while p != nil and p.name != "xyz": # p.name is not evaluated if p == nil p = p.next ``` The size of the bool type is one byte. Character type -------------- The character type is named `char` in Nim. Its size is one byte. Thus, it cannot represent a UTF-8 character, but a part of it. The `Rune` type is used for Unicode characters, it can represent any Unicode character. `Rune` is declared in the [unicode module](unicode.html). Enumeration types ----------------- Enumeration types define a new type whose values consist of the ones specified. The values are ordered. Example: ```nim type Direction = enum north, east, south, west ``` Now the following holds: ```nim ord(north) == 0 ord(east) == 1 ord(south) == 2 ord(west) == 3 # Also allowed: ord(Direction.west) == 3 ``` The implied order is: north < east < south < west. The comparison operators can be used with enumeration types. Instead of `north` etc., the enum value can also be qualified with the enum type that it resides in, `Direction.north`. For better interfacing to other programming languages, the fields of enum types can be assigned an explicit ordinal value. However, the ordinal values have to be in ascending order. A field whose ordinal value is not explicitly given is assigned the value of the previous field + 1. An explicit ordered enum can have *holes*: ```nim type TokenType = enum a = 2, b = 4, c = 89 # holes are valid ``` However, it is then not ordinal anymore, so it is impossible to use these enums as an index type for arrays. The procedures `inc`, `dec`, `succ` and `pred` are not available for them either. The compiler supports the built-in stringify operator `$` for enumerations. The stringify's result can be controlled by explicitly giving the string values to use: ```nim type MyEnum = enum valueA = (0, "my value A"), valueB = "value B", valueC = 2, valueD = (3, "abc") ``` As can be seen from the example, it is possible to both specify a field's ordinal value and its string value by using a tuple. It is also possible to only specify one of them. An enum can be marked with the `pure` pragma so that its fields are added to a special module-specific hidden scope that is only queried as the last attempt. Only non-ambiguous symbols are added to this scope. But one can always access these via type qualification written as `MyEnum.value`: ```nim type MyEnum {.pure.} = enum valueA, valueB, valueC, valueD, amb OtherEnum {.pure.} = enum valueX, valueY, valueZ, amb echo valueA # MyEnum.valueA echo amb # Error: Unclear whether it's MyEnum.amb or OtherEnum.amb echo MyEnum.amb # OK. ``` Enum value names are overloadable, much like routines. If both of the enums `T` and `U` have a member named `foo`, then the identifier `foo` corresponds to a choice between `T.foo` and `U.foo`. During overload resolution, the correct type of `foo` is decided from the context. If the type of `foo` is ambiguous, a static error will be produced. ```nim test = "nim c $1" type E1 = enum value1, value2 E2 = enum value1, value2 = 4 const Lookuptable = [ E1.value1: "1", # no need to qualify value2, known to be E1.value2 value2: "2" ] proc p(e: E1) = # disambiguation in 'case' statements: case e of value1: echo "A" of value2: echo "B" p value2 ``` In some cases, ambiguity of enums is resolved depending on the relation between the current scope and the scope the enums were defined in. ```nim # a.nim type Foo* = enum abc # b.nim import a type Bar = enum abc echo abc is Bar # true block: type Baz = enum abc echo abc is Baz # true ``` To implement bit fields with enums see [Bit fields]. String type ----------- All string literals are of the type `string`. A string in Nim is very similar to a sequence of characters. However, strings in Nim are both zero-terminated and have a length field. One can retrieve the length with the builtin `len` procedure; the length never counts the terminating zero. The terminating zero cannot be accessed unless the string is converted to the `cstring` type first. The terminating zero assures that this conversion can be done in O(1) and without any allocations. The assignment operator for strings always copies the string. The `&` operator concatenates strings. Most native Nim types support conversion to strings with the special `$` proc. When calling the `echo` proc, for example, the built-in stringify operation for the parameter is called: ```nim echo 3 # calls `$` for `int` ``` Whenever a user creates a specialized object, implementation of this procedure provides for `string` representation. ```nim type Person = object name: string age: int proc `$`(p: Person): string = # `$` always returns a string result = p.name & " is " & $p.age & # we *need* the `$` in front of p.age which # is natively an integer to convert it to # a string " years old." ``` While `$p.name` can also be used, the `$` operation on a string does nothing. Note that we cannot rely on automatic conversion from an `int` to a `string` like we can for the `echo` proc. Strings are compared by their lexicographical order. All comparison operators are available. Strings can be indexed like arrays (lower bound is 0). Unlike arrays, they can be used in case statements: ```nim case paramStr(i) of "-v": incl(options, optVerbose) of "-h", "-?": incl(options, optHelp) else: write(stdout, "invalid command line option!\n") ``` Per convention, all strings are UTF-8 strings, but this is not enforced. For example, when reading strings from binary files, they are merely a sequence of bytes. The index operation `s[i]` means the i-th *char* of `s`, not the i-th *unichar*. The iterator `runes` from the [unicode module](unicode.html) can be used for iteration over all Unicode characters. cstring type ------------ The `cstring` type meaning `compatible string` is the native representation of a string for the compilation backend. For the C backend the `cstring` type represents a pointer to a zero-terminated char array compatible with the type `char*` in ANSI C. Its primary purpose lies in easy interfacing with C. The index operation `s[i]` means the i-th *char* of `s`; however no bounds checking for `cstring` is performed making the index operation unsafe. A Nim `string` is implicitly convertible to `cstring` for convenience. If a Nim string is passed to a C-style variadic proc, it is implicitly converted to `cstring` too: ```nim proc printf(formatstr: cstring) {.importc: "printf", varargs, header: "".} printf("This works %s", "as expected") ``` Even though the conversion is implicit, it is not *safe*: The garbage collector does not consider a `cstring` to be a root and may collect the underlying memory. For this reason, the implicit conversion will be removed in future releases of the Nim compiler. Certain idioms like conversion of a `const` string to `cstring` are safe and will remain to be allowed. A `$` proc is defined for cstrings that returns a string. Thus, to get a nim string from a cstring: ```nim var str: string = "Hello!" var cstr: cstring = str var newstr: string = $cstr ``` `cstring` literals shouldn't be modified. ```nim var x = cstring"literals" x[1] = 'A' # This is wrong!!! ``` If the `cstring` originates from a regular memory (not read-only memory), it can be modified: ```nim var x = "123456" prepareMutation(x) # call `prepareMutation` before modifying the strings var s: cstring = cstring(x) s[0] = 'u' # This is ok ``` `cstring` values may also be used in case statements like strings. Structured types ---------------- A variable of a structured type can hold multiple values at the same time. Structured types can be nested to unlimited levels. Arrays, sequences, tuples, objects, and sets belong to the structured types. Array and sequence types ------------------------ Arrays are a homogeneous type, meaning that each element in the array has the same type. Arrays always have a fixed length specified as a constant expression (except for open arrays). They can be indexed by any ordinal type. A parameter `A` may be an *open array*, in which case it is indexed by integers from 0 to `len(A)-1`. An array expression may be constructed by the array constructor `[]`. The element type of this array expression is inferred from the type of the first element. All other elements need to be implicitly convertible to this type. An array type can be defined using the `array[size, T]` syntax, or using `array[lo..hi, T]` for arrays that start at an index other than zero. Sequences are similar to arrays but of dynamic length which may change during runtime (like strings). Sequences are implemented as growable arrays, allocating pieces of memory as items are added. A sequence `S` is always indexed by integers from 0 to `len(S)-1` and its bounds are checked. Sequences can be constructed by the array constructor `[]` in conjunction with the array to sequence operator `@`. Another way to allocate space for a sequence is to call the built-in `newSeq` procedure. A sequence may be passed to a parameter that is of type *open array*. Example: ```nim type IntArray = array[0..5, int] # an array that is indexed with 0..5 IntSeq = seq[int] # a sequence of integers var x: IntArray y: IntSeq x = [1, 2, 3, 4, 5, 6] # [] is the array constructor y = @[1, 2, 3, 4, 5, 6] # the @ turns the array into a sequence let z = [1.0, 2, 3, 4] # the type of z is array[0..3, float] ``` The lower bound of an array or sequence may be received by the built-in proc `low()`, the higher bound by `high()`. The length may be received by `len()`. `low()` for a sequence or an open array always returns 0, as this is the first valid index. One can append elements to a sequence with the `add()` proc or the `&` operator, and remove (and get) the last element of a sequence with the `pop()` proc. The notation `x[i]` can be used to access the i-th element of `x`. Arrays are always bounds checked (statically or at runtime). These checks can be disabled via pragmas or invoking the compiler with the `--boundChecks:off`:option: command-line switch. An array constructor can have explicit indexes for readability: ```nim type Values = enum valA, valB, valC const lookupTable = [ valA: "A", valB: "B", valC: "C" ] ``` If an index is left out, `succ(lastIndex)` is used as the index value: ```nim type Values = enum valA, valB, valC, valD, valE const lookupTable = [ valA: "A", "B", valC: "C", "D", "e" ] ``` Open arrays ----------- Often fixed size arrays turn out to be too inflexible; procedures should be able to deal with arrays of different sizes. The `openarray`:idx: type allows this; it can only be used for parameters. Open arrays are always indexed with an `int` starting at position 0. The `len`, `low` and `high` operations are available for open arrays too. Any array with a compatible base type can be passed to an open array parameter, the index type does not matter. In addition to arrays, sequences can also be passed to an open array parameter. The `openarray` type cannot be nested: multidimensional open arrays are not supported because this is seldom needed and cannot be done efficiently. ```nim proc testOpenArray(x: openArray[int]) = echo repr(x) testOpenArray([1,2,3]) # array[] testOpenArray(@[1,2,3]) # seq[] ``` Varargs ------- A `varargs` parameter is an open array parameter that additionally allows a variable number of arguments to be passed to a procedure. The compiler converts the list of arguments to an array implicitly: ```nim proc myWriteln(f: File, a: varargs[string]) = for s in items(a): write(f, s) write(f, "\n") myWriteln(stdout, "abc", "def", "xyz") # is transformed to: myWriteln(stdout, ["abc", "def", "xyz"]) ``` This transformation is only done if the `varargs` parameter is the last parameter in the procedure header. It is also possible to perform type conversions in this context: ```nim proc myWriteln(f: File, a: varargs[string, `$`]) = for s in items(a): write(f, s) write(f, "\n") myWriteln(stdout, 123, "abc", 4.0) # is transformed to: myWriteln(stdout, [$123, $"abc", $4.0]) ``` In this example `$` is applied to any argument that is passed to the parameter `a`. (Note that `$` applied to strings is a nop.) Note that an explicit array constructor passed to a `varargs` parameter is not wrapped in another implicit array construction: ```nim proc takeV[T](a: varargs[T]) = discard takeV([123, 2, 1]) # takeV's T is "int", not "array of int" ``` `varargs[typed]` is treated specially: It matches a variable list of arguments of arbitrary type but *always* constructs an implicit array. This is required so that the builtin `echo` proc does what is expected: ```nim proc echo*(x: varargs[typed, `$`]) {...} echo @[1, 2, 3] # prints "@[1, 2, 3]" and not "123" ``` Unchecked arrays ---------------- The `UncheckedArray[T]` type is a special kind of `array` where its bounds are not checked. This is often useful to implement customized flexibly sized arrays. Additionally, an unchecked array is translated into a C array of undetermined size: ```nim type MySeq = object len, cap: int data: UncheckedArray[int] ``` Produces roughly this C code: ```C typedef struct { NI len; NI cap; NI data[]; } MySeq; ``` The base type of the unchecked array may not contain any GC'ed memory but this is currently not checked. **Future directions**: GC'ed memory should be allowed in unchecked arrays and there should be an explicit annotation of how the GC is to determine the runtime size of the array. Tuples and object types ----------------------- A variable of a tuple or object type is a heterogeneous storage container. A tuple or object defines various named *fields* of a type. A tuple also defines a lexicographic *order* of the fields. Tuples are meant to be heterogeneous storage types with few abstractions. The `()` syntax can be used to construct tuples. The order of the fields in the constructor must match the order of the tuple's definition. Different tuple-types are *equivalent* if they specify the same fields of the same type in the same order. The *names* of the fields also have to be the same. ```nim type Person = tuple[name: string, age: int] # type representing a person: # it consists of a name and an age. var person: Person person = (name: "Peter", age: 30) assert person.name == "Peter" # the same, but less readable: person = ("Peter", 30) assert person[0] == "Peter" assert Person is (string, int) assert (string, int) is Person assert Person isnot tuple[other: string, age: int] # `other` is a different identifier ``` A tuple with one unnamed field can be constructed with the parentheses and a trailing comma: ```nim proc echoUnaryTuple(a: (int,)) = echo a[0] echoUnaryTuple (1,) ``` In fact, a trailing comma is allowed for every tuple construction. The implementation aligns the fields for the best access performance. The alignment is compatible with the way the C compiler does it. For consistency with `object` declarations, tuples in a `type` section can also be defined with indentation instead of `[]`: ```nim type Person = tuple # type representing a person name: string # a person consists of a name age: Natural # and an age ``` Objects provide many features that tuples do not. Objects provide inheritance and the ability to hide fields from other modules. Objects with inheritance enabled have information about their type at runtime so that the `of` operator can be used to determine the object's type. The `of` operator is similar to the `instanceof` operator in Java. ```nim type Person = object of RootObj name*: string # the * means that `name` is accessible from other modules age: int # no * means that the field is hidden Student = ref object of Person # a student is a person id: int # with an id field var student: Student person: Person assert(student of Student) # is true assert(student of Person) # also true ``` Object fields that should be visible from outside the defining module have to be marked by `*`. In contrast to tuples, different object types are never *equivalent*, they are nominal types whereas tuples are structural. Objects that have no ancestor are implicitly `final` and thus have no hidden type information. One can use the `inheritable` pragma to introduce new object roots apart from `system.RootObj`. ```nim type Person = object # example of a final object name*: string age: int Student = ref object of Person # Error: inheritance only works with non-final objects id: int ``` The assignment operator for tuples and objects copies each component. The methods to override this copying behavior are described [here][type bound operators]. Object construction ------------------- Objects can also be created with an `object construction expression`:idx: that has the syntax `T(fieldA: valueA, fieldB: valueB, ...)` where `T` is an `object` type or a `ref object` type: ```nim type Student = object name: string age: int PStudent = ref Student var a1 = Student(name: "Anton", age: 5) var a2 = PStudent(name: "Anton", age: 5) # this also works directly: var a3 = (ref Student)(name: "Anton", age: 5) # not all fields need to be mentioned, and they can be mentioned out of order: var a4 = Student(age: 5) ``` Note that, unlike tuples, objects require the field names along with their values. For a `ref object` type `system.new` is invoked implicitly. Object variants --------------- Often an object hierarchy is an overkill in certain situations where simple variant types are needed. Object variants are tagged unions discriminated via an enumerated type used for runtime type flexibility, mirroring the concepts of *sum types* and *algebraic data types (ADTs)* as found in other languages. An example: ```nim # This is an example of how an abstract syntax tree could be modelled in Nim type NodeKind = enum # the different node types nkInt, # a leaf with an integer value nkFloat, # a leaf with a float value nkString, # a leaf with a string value nkAdd, # an addition nkSub, # a subtraction nkIf # an if statement Node = ref NodeObj NodeObj = object case kind: NodeKind # the `kind` field is the discriminator of nkInt: intVal: int of nkFloat: floatVal: float of nkString: strVal: string of nkAdd, nkSub: leftOp, rightOp: Node of nkIf: condition, thenPart, elsePart: Node # create a new case object: var n = Node(kind: nkIf, condition: nil) # accessing n.thenPart is valid because the `nkIf` branch is active: n.thenPart = Node(kind: nkFloat, floatVal: 2.0) # the following statement raises an `FieldDefect` exception, because # n.kind's value does not fit and the `nkString` branch is not active: n.strVal = "" # invalid: would change the active object branch: n.kind = nkInt var x = Node(kind: nkAdd, leftOp: Node(kind: nkInt, intVal: 4), rightOp: Node(kind: nkInt, intVal: 2)) # valid: does not change the active object branch: x.kind = nkSub ``` As can be seen from the example, an advantage to an object hierarchy is that no casting between different object types is needed. Yet, access to invalid object fields raises an exception. The syntax of `case` in an object declaration follows closely the syntax of the `case` statement: The branches in a `case` section may be indented too. In the example, the `kind` field is called the `discriminator`:idx:\: For safety, its address cannot be taken and assignments to it are restricted: The new value must not lead to a change of the active object branch. Also, when the fields of a particular branch are specified during object construction, the corresponding discriminator value must be specified as a constant expression. Instead of changing the active object branch, replace the old object in memory with a new one completely: ```nim var x = Node(kind: nkAdd, leftOp: Node(kind: nkInt, intVal: 4), rightOp: Node(kind: nkInt, intVal: 2)) # change the node's contents: x[] = NodeObj(kind: nkString, strVal: "abc") ``` Starting with version 0.20 `system.reset` cannot be used anymore to support object branch changes as this never was completely memory safe. As a special rule, the discriminator kind can also be bounded using a `case` statement. If possible values of the discriminator variable in a `case` statement branch are a subset of discriminator values for the selected object branch, the initialization is considered valid. This analysis only works for immutable discriminators of an ordinal type and disregards `elif` branches. For discriminator values with a `range` type, the compiler checks if the entire range of possible values for the discriminator value is valid for the chosen object branch. A small example: ```nim let unknownKind = nkSub # invalid: unsafe initialization because the kind field is not statically known: var y = Node(kind: unknownKind, strVal: "y") var z = Node() case unknownKind of nkAdd, nkSub: # valid: possible values of this branch are a subset of nkAdd/nkSub object branch: z = Node(kind: unknownKind, leftOp: Node(), rightOp: Node()) else: echo "ignoring: ", unknownKind # also valid, since unknownKindBounded can only contain the values nkAdd or nkSub let unknownKindBounded = range[nkAdd..nkSub](unknownKind) z = Node(kind: unknownKindBounded, leftOp: Node(), rightOp: Node()) ``` cast uncheckedAssign -------------------- Some restrictions for case objects can be disabled via a `{.cast(uncheckedAssign).}` section: ```nim test="nim c $1" type TokenKind* = enum strLit, intLit Token = object case kind*: TokenKind of strLit: s*: string of intLit: i*: int64 proc passToVar(x: var TokenKind) = discard var t = Token(kind: strLit, s: "abc") {.cast(uncheckedAssign).}: # inside the 'cast' section it is allowed to pass 't.kind' to a 'var T' parameter: passToVar(t.kind) # inside the 'cast' section it is allowed to set field 's' even though the # constructed 'kind' field has an unknown value: t = Token(kind: t.kind, s: "abc") # inside the 'cast' section it is allowed to assign to the 't.kind' field directly: t.kind = intLit ``` Default values for object fields -------------------------------- Object fields are allowed to have a constant default value. The type of field can be omitted if a default value is given. ```nim test type Foo = object a: int = 2 b: float = 3.14 c = "I can have a default value" Bar = ref object a: int = 2 b: float = 3.14 c = "I can have a default value" ``` The explicit initialization uses these defaults which includes an `object` created with an object construction expression or the procedure `default`; a `ref object` created with an object construction expression or the procedure `new`; an array or a tuple with a subtype which has a default created with the procedure `default`. ```nim test type Foo = object a: int = 2 b = 3.0 Bar = ref object a: int = 2 b = 3.0 block: # created with an object construction expression let x = Foo() assert x.a == 2 and x.b == 3.0 let y = Bar() assert y.a == 2 and y.b == 3.0 block: # created with an object construction expression let x = default(Foo) assert x.a == 2 and x.b == 3.0 let y = default(array[1, Foo]) assert y[0].a == 2 and y[0].b == 3.0 let z = default(tuple[x: Foo]) assert z.x.a == 2 and z.x.b == 3.0 block: # created with the procedure `new` let y = new Bar assert y.a == 2 and y.b == 3.0 ``` Set type -------- .. include:: sets_fragment.txt Reference and pointer types --------------------------- References (similar to pointers in other programming languages) are a way to introduce many-to-one relationships. This means different references can point to and modify the same location in memory (also called `aliasing`:idx:). Nim distinguishes between `traced`:idx: and `untraced`:idx: references. Untraced references are also called *pointers*. Traced references point to objects of a garbage-collected heap, untraced references point to manually allocated objects or objects somewhere else in memory. Thus, untraced references are *unsafe*. However, for certain low-level operations (accessing the hardware) untraced references are unavoidable. Traced references are declared with the **ref** keyword, untraced references are declared with the **ptr** keyword. In general, a `ptr T` is implicitly convertible to the `pointer` type. An empty subscript `[]` notation can be used to de-refer a reference, the `addr` procedure returns the address of an item. An address is always an untraced reference. Thus, the usage of `addr` is an *unsafe* feature. The `.` (access a tuple/object field operator) and `[]` (array/string/sequence index operator) operators perform implicit dereferencing operations for reference types: ```nim type Node = ref NodeObj NodeObj = object le, ri: Node data: int var n: Node new(n) n.data = 9 # no need to write n[].data; in fact n[].data is highly discouraged! ``` In order to simplify structural type checking, recursive tuples are not valid: ```nim # invalid recursion type MyTuple = tuple[a: ref MyTuple] ``` Likewise `T = ref T` is an invalid type. As a syntactical extension, `object` types can be anonymous if declared in a type section via the `ref object` or `ptr object` notations. This feature is useful if an object should only gain reference semantics: ```nim type Node = ref object le, ri: Node data: int ``` To allocate a new traced object, the built-in procedure `new` has to be used. To deal with untraced memory, the procedures `alloc`, `dealloc` and `realloc` can be used. The documentation of the [system](system.html) module contains further information. Nil --- If a reference points to *nothing*, it has the value `nil`. `nil` is the default value for all `ref` and `ptr` types. The `nil` value can also be used like any other literal value. For example, it can be used in an assignment like `myRef = nil`. Dereferencing `nil` is an unrecoverable fatal runtime error (and not a panic). A successful dereferencing operation `p[]` implies that `p` is not nil. This can be exploited by the implementation to optimize code like: ```nim p[].field = 3 if p != nil: # if p were nil, `p[]` would have caused a crash already, # so we know `p` is always not nil here. action() ``` Into: ```nim p[].field = 3 action() ``` *Note*: This is not comparable to C's "undefined behavior" for dereferencing NULL pointers. Mixing GC'ed memory with `ptr` -------------------------------- Special care has to be taken if an untraced object contains traced objects like traced references, strings, or sequences: in order to free everything properly, the built-in procedure `reset` has to be called before freeing the untraced memory manually: ```nim type Data = tuple[x, y: int, s: string] # allocate memory for Data on the heap: var d = cast[ptr Data](alloc0(sizeof(Data))) # create a new string on the garbage collected heap: d.s = "abc" # tell the GC that the string is not needed anymore: reset(d.s) # free the memory: dealloc(d) ``` Without the `reset` call the memory allocated for the `d.s` string would never be freed. The example also demonstrates two important features for low-level programming: the `sizeof` proc returns the size of a type or value in bytes. The `cast` operator can circumvent the type system: the compiler is forced to treat the result of the `alloc0` call (which returns an untyped pointer) as if it would have the type `ptr Data`. Casting should only be done if it is unavoidable: it breaks type safety and bugs can lead to mysterious crashes. **Note**: The example only works because the memory is initialized to zero (`alloc0` instead of `alloc` does this): `d.s` is thus initialized to binary zero which the string assignment can handle. One needs to know low-level details like this when mixing garbage-collected data with unmanaged memory. .. XXX finalizers for traced objects Procedural type --------------- A procedural type is internally a pointer to a procedure. `nil` is an allowed value for a variable of a procedural type. Examples: ```nim proc printItem(x: int) = ... proc forEach(c: proc (x: int) {.cdecl.}) = ... forEach(printItem) # this will NOT compile because calling conventions differ ``` ```nim type OnMouseMove = proc (x, y: int) {.closure.} proc onMouseMove(mouseX, mouseY: int) = # has default calling convention echo "x: ", mouseX, " y: ", mouseY proc setOnMouseMove(mouseMoveEvent: OnMouseMove) = discard # ok, 'onMouseMove' has the default calling convention, which is compatible # to 'closure': setOnMouseMove(onMouseMove) ``` A subtle issue with procedural types is that the calling convention of the procedure influences the type compatibility: procedural types are only compatible if they have the same calling convention. As a special extension, a procedure of the calling convention `nimcall` can be passed to a parameter that expects a proc of the calling convention `closure`. Nim supports these `calling conventions`:idx:\: `nimcall`:idx: : is the default convention used for a Nim **proc**. It is the same as `fastcall`, but only for C compilers that support `fastcall`. `closure`:idx: : is the default calling convention for a **procedural type** that lacks any pragma annotations. It indicates that the procedure has a hidden implicit parameter (an *environment*). Proc vars that have the calling convention `closure` take up two machine words: One for the proc pointer and another one for the pointer to implicitly passed environment. `stdcall`:idx: : This is the stdcall convention as specified by Microsoft. The generated C procedure is declared with the `__stdcall` keyword. `cdecl`:idx: : The cdecl convention means that a procedure shall use the same convention as the C compiler. Under Windows the generated C procedure is declared with the `__cdecl` keyword. `safecall`:idx: : This is the safecall convention as specified by Microsoft. The generated C procedure is declared with the `__safecall` keyword. The word *safe* refers to the fact that all hardware registers shall be pushed to the hardware stack. `inline`:idx: : The inline convention means the caller should not call the procedure, but inline its code directly. Note that Nim does not inline, but leaves this to the C compiler; it generates `__inline` procedures. This is only a hint for the compiler: it may completely ignore it, and it may inline procedures that are not marked as `inline`. `fastcall`:idx: : Fastcall means different things to different C compilers. One gets whatever the C `__fastcall` means. `thiscall`:idx: : This is the thiscall calling convention as specified by Microsoft, used on C++ class member functions on the x86 architecture. `syscall`:idx: : The syscall convention is the same as `__syscall`:c: in C. It is used for interrupts. `noconv`:idx: : The generated C code will not have any explicit calling convention and thus use the C compiler's default calling convention. This is needed because Nim's default calling convention for procedures is `fastcall` to improve speed. Most calling conventions exist only for the Windows 32-bit platform. The default calling convention is `nimcall`, unless it is an inner proc (a proc inside of a proc). For an inner proc an analysis is performed whether it accesses its environment. If it does so, it has the calling convention `closure`, otherwise it has the calling convention `nimcall`. Distinct type ------------- A `distinct` type is a new type derived from a `base type`:idx: that is incompatible with its base type. In particular, it is an essential property of a distinct type that it **does not** imply a subtype relation between it and its base type. Explicit type conversions from a distinct type to its base type and vice versa are allowed. See also `distinctBase` to get the reverse operation. A distinct type is an ordinal type if its base type is an ordinal type. ### Modeling currencies A distinct type can be used to model different physical `units`:idx: with a numerical base type, for example. The following example models currencies. Different currencies should not be mixed in monetary calculations. Distinct types are a perfect tool to model different currencies: ```nim type Dollar = distinct int Euro = distinct int var d: Dollar e: Euro echo d + 12 # Error: cannot add a number with no unit and a `Dollar` ``` Unfortunately, `d + 12.Dollar` is not allowed either, because `+` is defined for `int` (among others), not for `Dollar`. So a `+` for dollars needs to be defined: ```nim proc `+` (x, y: Dollar): Dollar = result = Dollar(int(x) + int(y)) ``` It does not make sense to multiply a dollar with a dollar, but with a number without unit; and the same holds for division: ```nim proc `*` (x: Dollar, y: int): Dollar = result = Dollar(int(x) * y) proc `*` (x: int, y: Dollar): Dollar = result = Dollar(x * int(y)) proc `div` ... ``` This quickly gets tedious. The implementations are trivial and the compiler should not generate all this code only to optimize it away later - after all `+` for dollars should produce the same binary code as `+` for ints. The pragma `borrow`:idx: has been designed to solve this problem; in principle, it generates the above trivial implementations: ```nim proc `*` (x: Dollar, y: int): Dollar {.borrow.} proc `*` (x: int, y: Dollar): Dollar {.borrow.} proc `div` (x: Dollar, y: int): Dollar {.borrow.} ``` The `borrow` pragma makes the compiler use the same implementation as the proc that deals with the distinct type's base type, so no code is generated. But it seems all this boilerplate code needs to be repeated for the `Euro` currency. This can be solved with [templates]. ```nim test = "nim c $1" template additive(typ: typedesc) = proc `+` *(x, y: typ): typ {.borrow.} proc `-` *(x, y: typ): typ {.borrow.} # unary operators: proc `+` *(x: typ): typ {.borrow.} proc `-` *(x: typ): typ {.borrow.} template multiplicative(typ, base: typedesc) = proc `*` *(x: typ, y: base): typ {.borrow.} proc `*` *(x: base, y: typ): typ {.borrow.} proc `div` *(x: typ, y: base): typ {.borrow.} proc `mod` *(x: typ, y: base): typ {.borrow.} template comparable(typ: typedesc) = proc `<` * (x, y: typ): bool {.borrow.} proc `<=` * (x, y: typ): bool {.borrow.} proc `==` * (x, y: typ): bool {.borrow.} template defineCurrency(typ, base: untyped) = type typ* = distinct base additive(typ) multiplicative(typ, base) comparable(typ) defineCurrency(Dollar, int) defineCurrency(Euro, int) ``` The borrow pragma can also be used to annotate the distinct type to allow certain builtin operations to be lifted: ```nim type Foo = object a, b: int s: string Bar {.borrow: `.`.} = distinct Foo var bb: ref Bar new bb # field access now valid bb.a = 90 bb.s = "abc" ``` Currently, only the dot accessor can be borrowed in this way. ### Avoiding SQL injection attacks An SQL statement that is passed from Nim to an SQL database might be modeled as a string. However, using string templates and filling in the values is vulnerable to the famous `SQL injection attack`:idx:\: ```nim import std/strutils proc query(db: DbHandle, statement: string) = ... var username: string db.query("SELECT FROM users WHERE name = '$1'" % username) # Horrible security hole, but the compiler does not mind! ``` This can be avoided by distinguishing strings that contain SQL from strings that don't. Distinct types provide a means to introduce a new string type `SQL` that is incompatible with `string`: ```nim type SQL = distinct string proc query(db: DbHandle, statement: SQL) = ... var username: string db.query("SELECT FROM users WHERE name = '$1'" % username) # Static error: `query` expects an SQL string! ``` It is an essential property of abstract types that they **do not** imply a subtype relation between the abstract type and its base type. Explicit type conversions from `string` to `SQL` are allowed: ```nim import std/[strutils, sequtils] proc properQuote(s: string): SQL = # quotes a string properly for an SQL statement return SQL(s) proc `%` (frmt: SQL, values: openarray[string]): SQL = # quote each argument: let v = values.mapIt(properQuote(it)) # we need a temporary type for the type conversion :-( type StrSeq = seq[string] # call strutils.`%`: result = SQL(string(frmt) % StrSeq(v)) db.query("SELECT FROM users WHERE name = '$1'".SQL % [username]) ``` Now we have compile-time checking against SQL injection attacks. Since `"".SQL` is transformed to `SQL("")` no new syntax is needed for nice looking `SQL` string literals. The hypothetical `SQL` type actually exists in the library as the [SqlQuery type](db_common.html#SqlQuery) of modules like [db_sqlite](db_sqlite.html). Auto type --------- The `auto` type can only be used for return types and parameters. For return types it causes the compiler to infer the type from the routine body: ```nim proc returnsInt(): auto = 1984 ``` For parameters it currently creates implicitly generic routines: ```nim proc foo(a, b: auto) = discard ``` Is the same as: ```nim proc foo[T1, T2](a: T1, b: T2) = discard ``` However, later versions of the language might change this to mean "infer the parameters' types from the body". Then the above `foo` would be rejected as the parameters' types can not be inferred from an empty `discard` statement. Type relations ============== The following section defines several relations on types that are needed to describe the type checking done by the compiler. Type equality ------------- Nim uses structural type equivalence for most types. Only for objects, enumerations and distinct types and for generic types name equivalence is used. Subtype relation ---------------- If object `a` inherits from `b`, `a` is a subtype of `b`. This subtype relation is extended to the types `var`, `ref`, `ptr`. If `A` is a subtype of `B` and `A` and `B` are `object` types then: - `var A` is a subtype of `var B` - `ref A` is a subtype of `ref B` - `ptr A` is a subtype of `ptr B`. **Note**: One of the above pointer-indirections is required for assignment from a subtype to its parent type to prevent "object slicing". Convertible relation -------------------- A type `a` is **implicitly** convertible to type `b` iff the following algorithm returns true: ```nim proc isImplicitlyConvertible(a, b: PType): bool = if isSubtype(a, b): return true if isIntLiteral(a): return b in {int8, int16, int32, int64, int, uint, uint8, uint16, uint32, uint64, float32, float64} case a.kind of int: result = b in {int32, int64} of int8: result = b in {int16, int32, int64, int} of int16: result = b in {int32, int64, int} of int32: result = b in {int64, int} of uint: result = b in {uint32, uint64} of uint8: result = b in {uint16, uint32, uint64} of uint16: result = b in {uint32, uint64} of uint32: result = b in {uint64} of float32: result = b in {float64} of float64: result = b in {float32} of seq: result = b == openArray and typeEquals(a.baseType, b.baseType) of array: result = b == openArray and typeEquals(a.baseType, b.baseType) if a.baseType == char and a.indexType.rangeA == 0: result = b == cstring of cstring, ptr: result = b == pointer of string: result = b == cstring of proc: result = typeEquals(a, b) or compatibleParametersAndEffects(a, b) ``` We used the predicate `typeEquals(a, b)` for the "type equality" property and the predicate `isSubtype(a, b)` for the "subtype relation". `compatibleParametersAndEffects(a, b)` is currently not specified. Implicit conversions are also performed for Nim's `range` type constructor. Let `a0`, `b0` of type `T`. Let `A = range[a0..b0]` be the argument's type, `F` the formal parameter's type. Then an implicit conversion from `A` to `F` exists if `a0 >= low(F) and b0 <= high(F)` and both `T` and `F` are signed integers or if both are unsigned integers. A type `a` is **explicitly** convertible to type `b` iff the following algorithm returns true: ```nim proc isIntegralType(t: PType): bool = result = isOrdinal(t) or t.kind in {float, float32, float64} proc isExplicitlyConvertible(a, b: PType): bool = result = false if isImplicitlyConvertible(a, b): return true if typeEquals(a, b): return true if a == distinct and typeEquals(a.baseType, b): return true if b == distinct and typeEquals(b.baseType, a): return true if isIntegralType(a) and isIntegralType(b): return true if isSubtype(a, b) or isSubtype(b, a): return true ``` The convertible relation can be relaxed by a user-defined type `converter`:idx:. ```nim converter toInt(x: char): int = result = ord(x) var x: int chr: char = 'a' # implicit conversion magic happens here x = chr echo x # => 97 # one can use the explicit form too x = chr.toInt echo x # => 97 ``` The type conversion `T(a)` is an L-value if `a` is an L-value and `typeEqualsOrDistinct(T, typeof(a))` holds. Assignment compatibility ------------------------ An expression `b` can be assigned to an expression `a` iff `a` is an `l-value` and `isImplicitlyConvertible(b.typ, a.typ)` holds. Overload resolution =================== In a call `p(args)` where `p` may refer to more than one candidate, it is said to be a symbol choice. Overload resolution will attempt to find the best candidate, thus transforming the symbol choice into a resolved symbol. The routine `p` that matches best is selected following a series of trials explained below. In order: Catagory matching, Hierarchical Order Comparison, and finally, Complexity Analysis. If multiple candidates match equally well after all trials have been tested, the ambiguity is reported during semantic analysis. First Trial: Catagory matching -------------------------------- Every arg in `args` needs to match and there are multiple different categories of matches. Let `f` be the formal parameter's type and `a` the type of the argument. 1. Exact match: `a` and `f` are of the same type. 2. Literal match: `a` is an integer literal of value `v` and `f` is a signed or unsigned integer type and `v` is in `f`'s range. Or: `a` is a floating-point literal of value `v` and `f` is a floating-point type and `v` is in `f`'s range. 3. Generic match: `f` is a generic type and `a` matches, for instance `a` is `int` and `f` is a generic (constrained) parameter type (like in `[T]` or `[T: int|char]`). 4. Subrange or subtype match: `a` is a `range[T]` and `T` matches `f` exactly. Or: `a` is a subtype of `f`. 5. Integral conversion match: `a` is convertible to `f` and `f` and `a` is some integer or floating-point type. 6. Conversion match: `a` is convertible to `f`, possibly via a user defined `converter`. Each operand may fall into one of the categories above; the operand's highest priority category. The list above is in order or priority. If a candidate has more priority matches than all other candidates, it is selected as the resolved symbol. For example, if a candidate with one exact match is compared to a candidate with multiple generic matches and zero exact matches, the candidate with an exact match will win. Below is a pseudocode interpretation of category matching, `count(p, m)` counts the number of matches of the matching category `m` for the routine `p`. A routine `p` matches better than a routine `q` if the following algorithm returns true: ```nim for each matching category m in ["exact match", "literal match", "generic match", "subtype match", "integral match", "conversion match"]: if count(p, m) > count(q, m): return true elif count(p, m) == count(q, m): discard "continue with next category m" else: return false return "ambiguous" ``` Second Trial: Hierarchical Order Comparison ---------------------------------------------- The hierarchical order of a type is analogous to its relative specificity. Consider the type defined: ```nim type A[T] = object ``` Matching formals for this type include `T`, `object`, `A`, `A[...]` and `A[C]` where `C` is a concrete type, `A[...]` is a generic typeclass composition and `T` is an unconstrained generic type variable. This list is in order of specificity with respect to `A` as each subsequent category narrows the set of types that are members of their match set. In this trail, the formal parameters of candidates are compared in order (1st parameter, 2nd parameter, etc.) to search for a candidate that has an unrivaled specificity. If such a formal parameter is found, the candidate it belongs to is chosen as the resolved symbol. Third Trial: Complexity Analysis ---------------------------------- A slight clarification: While category matching digests all the formal parameters of a candidate at once (order doesn't matter), specificity comparison and complexity analysis operate on each formal parameter at a time. The following is the final trial to disambiguate a symbol choice when a pair of formal parameters have the same hierarchical order. The complexity of a type is essentially its number of modifiers and depth of shape. The definition with the *highest* complexity wins. Consider the following types: ```nim type A[T] = object B[T, H] = object ``` Note: The below examples are not exhaustive. We shall say that: 1. `A[T]` has a higher complexity than `A` 2. `var A[T]` has a higher complexity than `A[T]` 3. `A[A[T]]` has a higher complexity than `A[T]` 4. `B[T, H]` has a higher complexity than `A[T]` (`A` and `B` are not compatible here, but convoluted versions of this exist) 5. `B[ptr T, H]` has a higher complexity than `B[T, H]` Some Examples --------------- ```nim proc takesInt(x: int) = echo "int" proc takesInt[T](x: T) = echo "T" proc takesInt(x: int16) = echo "int16" takesInt(4) # "int" var x: int32 takesInt(x) # "T" var y: int16 takesInt(y) # "int16" var z: range[0..4] = 0 takesInt(z) # "T" ``` If the argument `a` matches both the parameter type `f` of `p` and `g` of `q` via a subtyping relation, the inheritance depth is taken into account: ```nim type A = object of RootObj B = object of A C = object of B proc p(obj: A) = echo "A" proc p(obj: B) = echo "B" var c = C() # not ambiguous, calls 'B', not 'A' since B is a subtype of A # but not vice versa: p(c) proc pp(obj: A, obj2: B) = echo "A B" proc pp(obj: B, obj2: A) = echo "B A" # but this is ambiguous: pp(c, c) ``` Likewise, for generic matches, the most specialized generic type (that still matches) is preferred: ```nim proc gen[T](x: ref ref T) = echo "ref ref T" proc gen[T](x: ref T) = echo "ref T" proc gen[T](x: T) = echo "T" var ri: ref int gen(ri) # "ref T" ``` Type variables match ---------------------- When overload resolution is considering candidates, the type variable's definition is not overlooked as it is used to define the formal parameter's type via variable substitution. For example: ```nim type A proc p[T: A](param: T) proc p[T: object](param: T) ``` These signatures are not ambiguous for a concrete type of `A` even though the formal parameters match ("T" == "T"). Instead `T` is treated as a variable in that (`T` ?= `T`) depending on the bound type of `T` at the time of overload resolution. Overloading based on 'var T' -------------------------------------- If the formal parameter `f` is of type `var T` in addition to the ordinary type checking, the argument is checked to be an `l-value`:idx:. `var T` matches better than just `T` then. ```nim proc sayHi(x: int): string = # matches a non-var int result = $x proc sayHi(x: var int): string = # matches a var int result = $(x + 10) proc sayHello(x: int) = var m = x # a mutable version of x echo sayHi(x) # matches the non-var version of sayHi echo sayHi(m) # matches the var version of sayHi sayHello(3) # 3 # 13 ``` Lazy type resolution for untyped -------------------------------- **Note**: An `unresolved`:idx: expression is an expression for which no symbol lookups and no type checking have been performed. Since templates and macros that are not declared as `immediate` participate in overloading resolution, it's essential to have a way to pass unresolved expressions to a template or macro. This is what the meta-type `untyped` accomplishes: ```nim template rem(x: untyped) = discard rem unresolvedExpression(undeclaredIdentifier) ``` A parameter of type `untyped` always matches any argument (as long as there is any argument passed to it). But one has to watch out because other overloads might trigger the argument's resolution: ```nim template rem(x: untyped) = discard proc rem[T](x: T) = discard # undeclared identifier: 'unresolvedExpression' rem unresolvedExpression(undeclaredIdentifier) ``` `untyped` and `varargs[untyped]` are the only metatype that are lazy in this sense, the other metatypes `typed` and `typedesc` are not lazy. Varargs matching ---------------- See [Varargs]. iterable -------- A called `iterator` yielding type `T` can be passed to a template or macro via a parameter typed as `untyped` (for unresolved expressions) or the type class `iterable` or `iterable[T]` (after type checking and overload resolution). ```nim iterator iota(n: int): int = for i in 0.. 8: 9 else: 10 ``` An `if` expression always results in a value, so the `else` part is required. `elif` parts are also allowed. When expression --------------- Just like an `if` expression, but corresponding to the `when` statement. Case expression --------------- The `case` expression is again very similar to the case statement: ```nim var favoriteFood = case animal of "dog": "bones" of "cat": "mice" elif animal.endsWith"whale": "plankton" else: echo "I'm not sure what to serve, but everybody loves ice cream" "ice cream" ``` As seen in the above example, the case expression can also introduce side effects. When multiple statements are given for a branch, Nim will use the last expression as the result value. Block expression ---------------- A `block` expression is almost like a block statement, but it is an expression that uses the last expression under the block as the value. It is similar to the statement list expression, but the statement list expression does not open a new block scope. ```nim let a = block: var fib = @[0, 1] for i in 0..10: fib.add fib[^1] + fib[^2] fib ``` Table constructor ----------------- A table constructor is syntactic sugar for an array constructor: ```nim {"key1": "value1", "key2", "key3": "value2"} # is the same as: [("key1", "value1"), ("key2", "value2"), ("key3", "value2")] ``` The empty table can be written `{:}` (in contrast to the empty set which is `{}`) which is thus another way to write the empty array constructor `[]`. This slightly unusual way of supporting tables has lots of advantages: * The order of the (key,value)-pairs is preserved, thus it is easy to support ordered dicts with for example `{key: val}.newOrderedTable`. * A table literal can be put into a `const` section and the compiler can easily put it into the executable's data section just like it can for arrays and the generated data section requires a minimal amount of memory. * Every table implementation is treated equally syntactically. * Apart from the minimal syntactic sugar, the language core does not need to know about tables. Type conversions ---------------- Syntactically a *type conversion* is like a procedure call, but a type name replaces the procedure name. A type conversion is always safe in the sense that a failure to convert a type to another results in an exception (if it cannot be determined statically). Ordinary procs are often preferred over type conversions in Nim: For instance, `$` is the `toString` operator by convention and `toFloat` and `toInt` can be used to convert from floating-point to integer or vice versa. Type conversion can also be used to disambiguate overloaded routines: ```nim proc p(x: int) = echo "int" proc p(x: string) = echo "string" let procVar = (proc(x: string))(p) procVar("a") ``` Since operations on unsigned numbers wrap around and are unchecked so are type conversions to unsigned integers and between unsigned integers. The rationale for this is mostly better interoperability with the C Programming language when algorithms are ported from C to Nim. **Note**: Historically the operations were unchecked and the conversions were sometimes checked but starting with the revision 1.0.4 of this document and the language implementation the conversions too are now *always unchecked*. Type casts ---------- *Type casts* are a crude mechanism to interpret the bit pattern of an expression as if it would be of another type. Type casts are only needed for low-level programming and are inherently unsafe. ```nim cast[int](x) ``` The target type of a cast must be a concrete type, for instance, a target type that is a type class (which is non-concrete) would be invalid: ```nim type Foo = int or float var x = cast[Foo](1) # Error: cannot cast to a non concrete type: 'Foo' ``` Type casts should not be confused with *type conversions,* as mentioned in the prior section. Unlike type conversions, a type cast cannot change the underlying bit pattern of the data being cast (aside from that the size of the target type may differ from the source type). Casting resembles *type punning* in other languages or C++'s `reinterpret_cast`:cpp: and `bit_cast`:cpp: features. If the size of the target type is larger than the size of the source type, the remaining memory is zeroed. The addr operator ----------------- The `addr` operator returns the address of an l-value. If the type of the location is `T`, the `addr` operator result is of the type `ptr T`. An address is always an untraced reference. Taking the address of an object that resides on the stack is **unsafe**, as the pointer may live longer than the object on the stack and can thus reference a non-existing object. One can get the address of variables. For easier interoperability with other compiled languages such as C, retrieving the address of a `let` variable, a parameter, or a `for` loop variable can be accomplished too: ```nim let t1 = "Hello" var t2 = t1 t3 : pointer = addr(t2) echo repr(addr(t2)) # --> ref 0x7fff6b71b670 --> 0x10bb81050"Hello" echo cast[ptr string](t3)[] # --> Hello # The following line also works echo repr(addr(t1)) ``` The unsafeAddr operator ----------------------- The `unsafeAddr` operator is a deprecated alias for the `addr` operator: ```nim let myArray = [1, 2, 3] foreignProcThatTakesAnAddr(unsafeAddr myArray) ``` Procedures ========== What most programming languages call `methods`:idx: or `functions`:idx: are called `procedures`:idx: in Nim. A procedure declaration consists of an identifier, zero or more formal parameters, a return value type and a block of code. Formal parameters are declared as a list of identifiers separated by either comma or semicolon. A parameter is given a type by `: typename`. The type applies to all parameters immediately before it, until either the beginning of the parameter list, a semicolon separator, or an already typed parameter, is reached. The semicolon can be used to make separation of types and subsequent identifiers more distinct. ```nim # Using only commas proc foo(a, b: int, c, d: bool): int # Using semicolon for visual distinction proc foo(a, b: int; c, d: bool): int # Will fail: a is untyped since ';' stops type propagation. proc foo(a; b: int; c, d: bool): int ``` A parameter may be declared with a default value which is used if the caller does not provide a value for the argument. The value will be reevaluated every time the function is called. ```nim # b is optional with 47 as its default value. proc foo(a: int, b: int = 47): int ``` Parameters can be declared mutable and so allow the proc to modify those arguments, by using the type modifier `var`. ```nim # "returning" a value to the caller through the 2nd argument # Notice that the function uses no actual return value at all (ie void) proc foo(inp: int, outp: var int) = outp = inp + 47 ``` If the proc declaration doesn't have a body, it is a `forward`:idx: declaration. If the proc returns a value, the procedure body can access an implicitly declared variable named `result`:idx: that represents the return value. Procs can be overloaded. The overloading resolution algorithm determines which proc is the best match for the arguments. Example: ```nim proc toLower(c: char): char = # toLower for characters if c in {'A'..'Z'}: result = chr(ord(c) + (ord('a') - ord('A'))) else: result = c proc toLower(s: string): string = # toLower for strings result = newString(len(s)) for i in 0..len(s) - 1: result[i] = toLower(s[i]) # calls toLower for characters; no recursion! ``` Calling a procedure can be done in many ways: ```nim proc callme(x, y: int, s: string = "", c: char, b: bool = false) = ... # call with positional arguments # parameter bindings: callme(0, 1, "abc", '\t', true) # (x=0, y=1, s="abc", c='\t', b=true) # call with named and positional arguments: callme(y=1, x=0, "abd", '\t') # (x=0, y=1, s="abd", c='\t', b=false) # call with named arguments (order is not relevant): callme(c='\t', y=1, x=0) # (x=0, y=1, s="", c='\t', b=false) # call as a command statement: no () needed: callme 0, 1, "abc", '\t' # (x=0, y=1, s="abc", c='\t', b=false) ``` A procedure may call itself recursively. `Operators`:idx: are procedures with a special operator symbol as identifier: ```nim proc `$` (x: int): string = # converts an integer to a string; this is a prefix operator. result = intToStr(x) ``` Operators with one parameter are prefix operators, operators with two parameters are infix operators. (However, the parser distinguishes these from the operator's position within an expression.) There is no way to declare postfix operators: all postfix operators are built-in and handled by the grammar explicitly. Any operator can be called like an ordinary proc with the \`opr\` notation. (Thus an operator can have more than two parameters): ```nim proc `*+` (a, b, c: int): int = # Multiply and add result = a * b + c assert `*+`(3, 4, 6) == `+`(`*`(a, b), c) ``` Export marker ------------- If a declared symbol is marked with an `asterisk`:idx: it is exported from the current module: ```nim proc exportedEcho*(s: string) = echo s proc `*`*(a: string; b: int): string = result = newStringOfCap(a.len * b) for i in 1..b: result.add a var exportedVar*: int const exportedConst* = 78 type ExportedType* = object exportedField*: int ``` Method call syntax ------------------ For object-oriented programming, the syntax `obj.methodName(args)` can be used instead of `methodName(obj, args)`. The parentheses can be omitted if there are no remaining arguments: `obj.len` (instead of `len(obj)`). This method call syntax is not restricted to objects, it can be used to supply any type of first argument for procedures: ```nim echo "abc".len # is the same as echo len "abc" echo "abc".toUpper() echo {'a', 'b', 'c'}.card stdout.writeLine("Hallo") # the same as writeLine(stdout, "Hallo") ``` Another way to look at the method call syntax is that it provides the missing postfix notation. The method call syntax conflicts with explicit generic instantiations: `p[T](x)` cannot be written as `x.p[T]` because `x.p[T]` is always parsed as `(x.p)[T]`. See also: [Limitations of the method call syntax]. The `[: ]` notation has been designed to mitigate this issue: `x.p[:T]` is rewritten by the parser to `p[T](x)`, `x.p[:T](y)` is rewritten to `p[T](x, y)`. Note that `[: ]` has no AST representation, the rewrite is performed directly in the parsing step. Properties ---------- Nim has no need for *get-properties*: Ordinary get-procedures that are called with the *method call syntax* achieve the same. But setting a value is different; for this, a special setter syntax is needed: ```nim # Module asocket type Socket* = ref object of RootObj host: int # cannot be accessed from the outside of the module proc `host=`*(s: var Socket, value: int) {.inline.} = ## setter of hostAddr. ## This accesses the 'host' field and is not a recursive call to ## `host=` because the builtin dot access is preferred if it is ## available: s.host = value proc host*(s: Socket): int {.inline.} = ## getter of hostAddr ## This accesses the 'host' field and is not a recursive call to ## `host` because the builtin dot access is preferred if it is ## available: s.host ``` ```nim # module B import asocket var s: Socket new s s.host = 34 # same as `host=`(s, 34) ``` A proc defined as `f=` (with the trailing `=`) is called a `setter`:idx:. A setter can be called explicitly via the common backticks notation: ```nim proc `f=`(x: MyObject; value: string) = discard `f=`(myObject, "value") ``` `f=` can be called implicitly in the pattern `x.f = value` if and only if the type of `x` does not have a field named `f` or if `f` is not visible in the current module. These rules ensure that object fields and accessors can have the same name. Within the module `x.f` is then always interpreted as field access and outside the module it is interpreted as an accessor proc call. Command invocation syntax ------------------------- Routines can be invoked without the `()` if the call is syntactically a statement. This command invocation syntax also works for expressions, but then only a single argument may follow. This restriction means `echo f 1, f 2` is parsed as `echo(f(1), f(2))` and not as `echo(f(1, f(2)))`. The method call syntax may be used to provide one more argument in this case: ```nim proc optarg(x: int, y: int = 0): int = x + y proc singlearg(x: int): int = 20*x echo optarg 1, " ", singlearg 2 # prints "1 40" let fail = optarg 1, optarg 8 # Wrong. Too many arguments for a command call let x = optarg(1, optarg 8) # traditional procedure call with 2 arguments let y = 1.optarg optarg 8 # same thing as above, w/o the parenthesis assert x == y ``` The command invocation syntax also can't have complex expressions as arguments. For example: [anonymous procedures], `if`, `case` or `try`. Function calls with no arguments still need () to distinguish between a call and the function itself as a first-class value. Closures -------- Procedures can appear at the top level in a module as well as inside other scopes, in which case they are called nested procs. A nested proc can access local variables from its enclosing scope and if it does so it becomes a closure. Any captured variables are stored in a hidden additional argument to the closure (its environment) and they are accessed by reference by both the closure and its enclosing scope (i.e. any modifications made to them are visible in both places). The closure environment may be allocated on the heap or on the stack if the compiler determines that this would be safe. ### Creating closures in loops Since closures capture local variables by reference it is often not wanted behavior inside loop bodies. See [closureScope]( system.html#closureScope.t,untyped) and [capture]( sugar.html#capture.m,varargs[typed],untyped) for details on how to change this behavior. Anonymous procedures -------------------- Unnamed procedures can be used as lambda expressions to pass into other procedures: ```nim var cities = @["Frankfurt", "Tokyo", "New York", "Kyiv"] cities.sort(proc (x, y: string): int = cmp(x.len, y.len)) ``` Procs as expressions can appear both as nested procs and inside top-level executable code. The [sugar](sugar.html) module contains the `=>` macro which enables a more succinct syntax for anonymous procedures resembling lambdas as they are in languages like JavaScript, C#, etc. Do notation ----------- As a special convenience notation that keeps most elements of a regular proc expression, the `do` keyword can be used to pass anonymous procedures to routines: ```nim var cities = @["Frankfurt", "Tokyo", "New York", "Kyiv"] sort(cities) do (x, y: string) -> int: cmp(x.len, y.len) # Less parentheses using the method plus command syntax: cities = cities.map do (x: string) -> string: "City of " & x ``` `do` is written after the parentheses enclosing the regular proc parameters. The proc expression represented by the `do` block is appended to the routine call as the last argument. In calls using the command syntax, the `do` block will bind to the immediately preceding expression rather than the command call. `do` with a parameter list or pragma list corresponds to an anonymous `proc`, however `do` without parameters or pragmas is treated as a normal statement list. This allows macros to receive both indented statement lists as an argument in inline calls, as well as a direct mirror of Nim's routine syntax. ```nim # Passing a statement list to an inline macro: macroResults.add quote do: if not `ex`: echo `info`, ": Check failed: ", `expString` # Processing a routine definition in a macro: rpc(router, "add") do (a, b: int) -> int: result = a + b ``` Func ---- The `func` keyword introduces a shortcut for a `noSideEffect`:idx: proc. ```nim func binarySearch[T](a: openArray[T]; elem: T): int ``` Is short for: ```nim proc binarySearch[T](a: openArray[T]; elem: T): int {.noSideEffect.} ``` Routines -------- A routine is a symbol of kind: `proc`, `func`, `method`, `iterator`, `macro`, `template`, `converter`. Type bound operators -------------------- A type bound operator is a `proc` or `func` whose name starts with `=` but isn't an operator (i.e. containing only symbols, such as `==`). These are unrelated to setters (see [Properties]), which instead end in `=`. A type bound operator declared for a type applies to the type regardless of whether the operator is in scope (including if it is private). ```nim # foo.nim: var witness* = 0 type Foo[T] = object proc initFoo*(T: typedesc): Foo[T] = discard proc `=destroy`[T](x: var Foo[T]) = witness.inc # type bound operator # main.nim: import foo block: var a = initFoo(int) doAssert witness == 0 doAssert witness == 1 block: var a = initFoo(int) doAssert witness == 1 `=destroy`(a) # can be called explicitly, even without being in scope doAssert witness == 2 # will still be called upon exiting scope doAssert witness == 3 ``` Type bound operators are: `=destroy`, `=copy`, `=sink`, `=trace`, `=deepcopy`, `=wasMoved`, `=dup`. These operations can be *overridden* instead of *overloaded*. This means that the implementation is automatically lifted to structured types. For instance, if the type `T` has an overridden assignment operator `=`, this operator is also used for assignments of the type `seq[T]`. Since these operations are bound to a type, they have to be bound to a nominal type for reasons of simplicity of implementation; this means an overridden `deepCopy` for `ref T` is really bound to `T` and not to `ref T`. This also means that one cannot override `deepCopy` for both `ptr T` and `ref T` at the same time, instead a distinct or object helper type has to be used for one pointer type. For more details on some of those procs, see [Lifetime-tracking hooks](destructors.html#lifetimeminustracking-hooks). Nonoverloadable builtins ------------------------ The following built-in procs cannot be overloaded for reasons of implementation simplicity (they require specialized semantic checking): declared, defined, definedInScope, compiles, sizeof, is, shallowCopy, getAst, astToStr, spawn, procCall Thus, they act more like keywords than like ordinary identifiers; unlike a keyword however, a redefinition may `shadow`:idx: the definition in the [system](system.html) module. From this list the following should not be written in dot notation `x.f` since `x` cannot be type-checked before it gets passed to `f`: declared, defined, definedInScope, compiles, getAst, astToStr Var parameters -------------- The type of a parameter may be prefixed with the `var` keyword: ```nim proc divmod(a, b: int; res, remainder: var int) = res = a div b remainder = a mod b var x, y: int divmod(8, 5, x, y) # modifies x and y assert x == 1 assert y == 3 ``` In the example, `res` and `remainder` are `var parameters`. Var parameters can be modified by the procedure and the changes are visible to the caller. The argument passed to a var parameter has to be an l-value. Var parameters are implemented as hidden pointers. The above example is equivalent to: ```nim proc divmod(a, b: int; res, remainder: ptr int) = res[] = a div b remainder[] = a mod b var x, y: int divmod(8, 5, addr(x), addr(y)) assert x == 1 assert y == 3 ``` In the examples, var parameters or pointers are used to provide two return values. This can be done in a cleaner way by returning a tuple: ```nim proc divmod(a, b: int): tuple[res, remainder: int] = (a div b, a mod b) var t = divmod(8, 5) assert t.res == 1 assert t.remainder == 3 ``` One can use `tuple unpacking`:idx: to access the tuple's fields: ```nim var (x, y) = divmod(8, 5) # tuple unpacking assert x == 1 assert y == 3 ``` **Note**: `var` parameters are never necessary for efficient parameter passing. Since non-var parameters cannot be modified the compiler is always free to pass arguments by reference if it considers it can speed up execution. Var return type --------------- A proc, converter, or iterator may return a `var` type which means that the returned value is an l-value and can be modified by the caller: ```nim var g = 0 proc writeAccessToG(): var int = result = g writeAccessToG() = 6 assert g == 6 ``` It is a static error if the implicitly introduced pointer could be used to access a location beyond its lifetime: ```nim proc writeAccessToG(): var int = var g = 0 result = g # Error! ``` For iterators, a component of a tuple return type can have a `var` type too: ```nim iterator mpairs(a: var seq[string]): tuple[key: int, val: var string] = for i in 0..a.high: yield (i, a[i]) ``` In the standard library every name of a routine that returns a `var` type starts with the prefix `m` per convention. .. include:: manual/var_t_return.md ### Future directions Later versions of Nim can be more precise about the borrowing rule with a syntax like: ```nim proc foo(other: Y; container: var X): var T from container ``` Here `var T from container` explicitly exposes that the location is derived from the second parameter (called 'container' in this case). The syntax `var T from p` specifies a type `varTy[T, 2]` which is incompatible with `varTy[T, 1]`. NRVO ---- **Note**: This section describes the current implementation. This part of the language specification will be changed. See https://github.com/nim-lang/RFCs/issues/230 for more information. The return value is represented inside the body of a routine as the special `result`:idx: variable. This allows for a mechanism much like C++'s "named return value optimization" (`NRVO`:idx:). NRVO means that the stores to `result` inside `p` directly affect the destination `dest` in `let/var dest = p(args)` (definition of `dest`) and also in `dest = p(args)` (assignment to `dest`). This is achieved by rewriting `dest = p(args)` to `p'(args, dest)` where `p'` is a variation of `p` that returns `void` and receives a hidden mutable parameter representing `result`. Informally: ```nim proc p(): BigT = ... var x = p() x = p() # is roughly turned into: proc p(result: var BigT) = ... var x; p(x) p(x) ``` Let `T`'s be `p`'s return type. NRVO applies for `T` if `sizeof(T) >= N` (where `N` is implementation dependent), in other words, it applies for "big" structures. If `p` can raise an exception, NRVO applies regardless. This can produce observable differences in behavior: ```nim type BigT = array[16, int] proc p(raiseAt: int): BigT = for i in 0..high(result): if i == raiseAt: raise newException(ValueError, "interception") result[i] = i proc main = var x: BigT try: x = p(8) except ValueError: doAssert x == [0, 1, 2, 3, 4, 5, 6, 7, 0, 0, 0, 0, 0, 0, 0, 0] main() ``` The compiler can produce a warning in these cases, however this behavior is turned off by default. It can be enabled for a section of code via the `warning[ObservableStores]` and `push`/`pop` pragmas. Take the above code as an example: ```nim {.push warning[ObservableStores]: on.} main() {.pop.} ``` Overloading of the subscript operator ------------------------------------- The `[]` subscript operator for arrays/openarrays/sequences can be overloaded for any type (with some exceptions) by defining a routine with the name `[]`. ```nim type Foo = object data: seq[int] proc `[]`(foo: Foo, i: int): int = result = foo.data[i] let foo = Foo(data: @[1, 2, 3]) echo foo[1] # 2 ``` Assignment to subscripts can also be overloaded by naming a routine `[]=`, which has precedence over assigning to the result of `[]`. ```nim type Foo = object data: seq[int] proc `[]`(foo: Foo, i: int): int = result = foo.data[i] proc `[]=`(foo: var Foo, i: int, val: int) = foo.data[i] = val var foo = Foo(data: @[1, 2, 3]) echo foo[1] # 2 foo[1] = 5 echo foo.data # @[1, 5, 3] echo foo[1] # 5 ``` Overloads of the subscript operator cannot be applied to routine or type symbols themselves, as this conflicts with the syntax for instantiating generic parameters, i.e. `foo[int](1, 2, 3)` or `Foo[int]`. Methods ============= Procedures always use static dispatch. Methods use dynamic dispatch. For dynamic dispatch to work on an object it should be a reference type. ```nim type Expression = ref object of RootObj ## abstract base class for an expression Literal = ref object of Expression x: int PlusExpr = ref object of Expression a, b: Expression method eval(e: Expression): int {.base.} = # override this base method raise newException(CatchableError, "Method without implementation override") method eval(e: Literal): int = return e.x method eval(e: PlusExpr): int = # watch out: relies on dynamic binding result = eval(e.a) + eval(e.b) proc newLit(x: int): Literal = new(result) result.x = x proc newPlus(a, b: Expression): PlusExpr = new(result) result.a = a result.b = b echo eval(newPlus(newPlus(newLit(1), newLit(2)), newLit(4))) ``` In the example the constructors `newLit` and `newPlus` are procs because they should use static binding, but `eval` is a method because it requires dynamic binding. As can be seen in the example, base methods have to be annotated with the `base`:idx: pragma. The `base` pragma also acts as a reminder for the programmer that a base method `m` is used as the foundation to determine all the effects that a call to `m` might cause. **Note**: Compile-time execution is not (yet) supported for methods. **Note**: Starting from Nim 0.20, generic methods are deprecated. Multi-methods -------------- **Note:** Starting from Nim 0.20, to use multi-methods one must explicitly pass `--multimethods:on`:option: when compiling. In a multi-method, all parameters that have an object type are used for the dispatching: ```nim test = "nim c --multiMethods:on $1" type Thing = ref object of RootObj Unit = ref object of Thing x: int method collide(a, b: Thing) {.base, inline.} = quit "to override!" method collide(a: Thing, b: Unit) {.inline.} = echo "1" method collide(a: Unit, b: Thing) {.inline.} = echo "2" var a, b: Unit new a new b collide(a, b) # output: 2 ``` Inhibit dynamic method resolution via procCall ----------------------------------------------- Dynamic method resolution can be inhibited via the builtin `system.procCall`:idx:. This is somewhat comparable to the `super`:idx: keyword that traditional OOP languages offer. ```nim test = "nim c $1" type Thing = ref object of RootObj Unit = ref object of Thing x: int method m(a: Thing) {.base.} = echo "base" method m(a: Unit) = # Call the base method: procCall m(Thing(a)) echo "1" ``` Iterators and the for statement =============================== The `for`:idx: statement is an abstract mechanism to iterate over the elements of a container. It relies on an `iterator`:idx: to do so. Like `while` statements, `for` statements open an `implicit block`:idx: so that they can be left with a `break` statement. The `for` loop declares iteration variables - their scope reaches until the end of the loop body. The iteration variables' types are inferred by the return type of the iterator. An iterator is similar to a procedure, except that it can be called in the context of a `for` loop. Iterators provide a way to specify the iteration over an abstract type. The `yield` statement in the called iterator plays a key role in the execution of a `for` loop. Whenever a `yield` statement is reached, the data is bound to the `for` loop variables and control continues in the body of the `for` loop. The iterator's local variables and execution state are automatically saved between calls. Example: ```nim # this definition exists in the system module iterator items*(a: string): char {.inline.} = var i = 0 while i < len(a): yield a[i] inc(i) for ch in items("hello world"): # `ch` is an iteration variable echo ch ``` The compiler generates code as if the programmer had written this: ```nim var i = 0 while i < len(a): var ch = a[i] echo ch inc(i) ``` If the iterator yields a tuple, there can be as many iteration variables as there are components in the tuple. The i'th iteration variable's type is the type of the i'th component. In other words, implicit tuple unpacking in a for loop context is supported. Implicit items/pairs invocations -------------------------------- If the for loop expression `e` does not denote an iterator and the for loop has exactly 1 variable, the for loop expression is rewritten to `items(e)`; i.e. an `items` iterator is implicitly invoked: ```nim for x in [1,2,3]: echo x ``` If the for loop has exactly 2 variables, a `pairs` iterator is implicitly invoked. Symbol lookup of the identifiers `items`/`pairs` is performed after the rewriting step, so that all overloads of `items`/`pairs` are taken into account. First-class iterators --------------------- There are 2 kinds of iterators in Nim: *inline* and *closure* iterators. An `inline iterator`:idx: is an iterator that's always inlined by the compiler leading to zero overhead for the abstraction, but may result in a heavy increase in code size. Caution: the body of a for loop over an inline iterator is inlined into each `yield` statement appearing in the iterator code, so ideally the code should be refactored to contain a single yield when possible to avoid code bloat. Inline iterators are second class citizens; They can be passed as parameters only to other inlining code facilities like templates, macros, and other inline iterators. In contrast to that, a `closure iterator`:idx: can be passed around more freely: ```nim iterator count0(): int {.closure.} = yield 0 iterator count2(): int {.closure.} = var x = 1 yield x inc x yield x proc invoke(iter: iterator(): int {.closure.}) = for x in iter(): echo x invoke(count0) invoke(count2) ``` Closure iterators and inline iterators have some restrictions: 1. For now, a closure iterator cannot be executed at compile time. 2. `return` is allowed in a closure iterator but not in an inline iterator (but rarely useful) and ends the iteration. 3. Inline iterators cannot be recursive. 4. Neither inline nor closure iterators have the special `result` variable. Iterators that are neither marked `{.closure.}` nor `{.inline.}` explicitly default to being inline, but this may change in future versions of the implementation. The `iterator` type is always of the calling convention `closure` implicitly; the following example shows how to use iterators to implement a `collaborative tasking`:idx: system: ```nim # simple tasking: type Task = iterator (ticker: int) iterator a1(ticker: int) {.closure.} = echo "a1: A" yield echo "a1: B" yield echo "a1: C" yield echo "a1: D" iterator a2(ticker: int) {.closure.} = echo "a2: A" yield echo "a2: B" yield echo "a2: C" proc runTasks(t: varargs[Task]) = var ticker = 0 while true: let x = t[ticker mod t.len] if finished(x): break x(ticker) inc ticker runTasks(a1, a2) ``` The builtin `system.finished` can be used to determine if an iterator has finished its operation; no exception is raised on an attempt to invoke an iterator that has already finished its work. Note that `system.finished` is error-prone to use because it only returns `true` one iteration after the iterator has finished: ```nim iterator mycount(a, b: int): int {.closure.} = var x = a while x <= b: yield x inc x var c = mycount # instantiate the iterator while not finished(c): echo c(1, 3) # Produces 1 2 3 0 ``` Instead, this code has to be used: ```nim var c = mycount # instantiate the iterator while true: let value = c(1, 3) if finished(c): break # and discard 'value'! echo value ``` It helps to think that the iterator actually returns a pair `(value, done)` and `finished` is used to access the hidden `done` field. Closure iterators are *resumable functions* and so one has to provide the arguments to every call. To get around this limitation one can capture parameters of an outer factory proc: ```nim proc mycount(a, b: int): iterator (): int = result = iterator (): int = var x = a while x <= b: yield x inc x let foo = mycount(1, 4) for f in foo(): echo f ``` The call can be made more like an inline iterator with a for loop macro: ```nim import std/macros macro toItr(x: ForLoopStmt): untyped = let expr = x[0] let call = x[1][1] # Get foo out of toItr(foo) let body = x[2] result = quote do: block: let itr = `call` for `expr` in itr(): `body` for f in toItr(mycount(1, 4)): # using early `proc mycount` echo f ``` Because of full backend function call apparatus involvement, closure iterator invocation is typically higher cost than inline iterators. Adornment by a macro wrapper at the call site like this is a possibly useful reminder. The factory `proc`, as an ordinary procedure, can be recursive. The above macro allows such recursion to look much like a recursive iterator would. For example: ```nim proc recCountDown(n: int): iterator(): int = result = iterator(): int = if n > 0: yield n for e in toItr(recCountDown(n - 1)): yield e for i in toItr(recCountDown(6)): # Emits: 6 5 4 3 2 1 echo i ``` See also [iterable] for passing iterators to templates and macros. Converters ========== A converter is like an ordinary proc except that it enhances the "implicitly convertible" type relation (see [Convertible relation]): ```nim # bad style ahead: Nim is not C. converter toBool(x: int): bool = x != 0 if 4: echo "compiles" ``` A converter can also be explicitly invoked for improved readability. Note that implicit converter chaining is not supported: If there is a converter from type A to type B and from type B to type C, the implicit conversion from A to C is not provided. Type sections ============= Example: ```nim type # example demonstrating mutually recursive types Node = ref object # an object managed by the garbage collector (ref) le, ri: Node # left and right subtrees sym: ref Sym # leaves contain a reference to a Sym Sym = object # a symbol name: string # the symbol's name line: int # the line the symbol was declared in code: Node # the symbol's abstract syntax tree ``` A type section begins with the `type` keyword. It contains multiple type definitions. A type definition binds a type to a name. Type definitions can be recursive or even mutually recursive. Mutually recursive types are only possible within a single `type` section. Nominal types like `objects` or `enums` can only be defined in a `type` section. Exception handling ================== Try statement ------------- Example: ```nim # read the first two lines of a text file that should contain numbers # and tries to add them var f: File if open(f, "numbers.txt"): try: var a = readLine(f) var b = readLine(f) echo "sum: " & $(parseInt(a) + parseInt(b)) except OverflowDefect: echo "overflow!" except ValueError, IOError: echo "catch multiple exceptions!" except CatchableError: echo "Catchable exception!" finally: close(f) ``` The statements after the `try` are executed in sequential order unless an exception `e` is raised. If the exception type of `e` matches any listed in an `except` clause, the corresponding statements are executed. The statements following the `except` clauses are called `exception handlers`:idx:. If there is a `finally`:idx: clause, it is always executed after the exception handlers. The exception is *consumed* in an exception handler. However, an exception handler may raise another exception. If the exception is not handled, it is propagated through the call stack. This means that often the rest of the procedure - that is not within a `finally` clause - is not executed (if an exception occurs). Try expression -------------- Try can also be used as an expression; the type of the `try` branch then needs to fit the types of `except` branches, but the type of the `finally` branch always has to be `void`: ```nim test from std/strutils import parseInt let x = try: parseInt("133a") except ValueError: -1 finally: echo "hi" ``` To prevent confusing code there is a parsing limitation; if the `try` follows a `(` it has to be written as a one liner: ```nim test from std/strutils import parseInt let x = (try: parseInt("133a") except ValueError: -1) ``` Except clauses -------------- Within an `except` clause it is possible to access the current exception using the following syntax: ```nim try: # ... except IOError as e: # Now use "e" echo "I/O error: " & e.msg ``` Alternatively, it is possible to use `getCurrentException` to retrieve the exception that has been raised: ```nim try: # ... except IOError: let e = getCurrentException() # Now use "e" ``` Note that `getCurrentException` always returns a `ref Exception` type. If a variable of the proper type is needed (in the example above, `IOError`), one must convert it explicitly: ```nim try: # ... except IOError: let e = (ref IOError)(getCurrentException()) # "e" is now of the proper type ``` However, this is seldom needed. The most common case is to extract an error message from `e`, and for such situations, it is enough to use `getCurrentExceptionMsg`: ```nim try: # ... except CatchableError: echo getCurrentExceptionMsg() ``` Custom exceptions ----------------- It is possible to create custom exceptions. A custom exception is a custom type: ```nim type LoadError* = object of Exception ``` Ending the custom exception's name with `Error` is recommended. Custom exceptions can be raised just like any other exception, e.g.: ```nim raise newException(LoadError, "Failed to load data") ``` Defer statement --------------- Instead of a `try finally` statement a `defer` statement can be used, which avoids lexical nesting and offers more flexibility in terms of scoping as shown below. Any statements following the `defer` will be considered to be in an implicit try block in the current block: ```nim test = "nim c $1" proc main = var f = open("numbers.txt", fmWrite) defer: close(f) f.write "abc" f.write "def" ``` Is rewritten to: ```nim test = "nim c $1" proc main = var f = open("numbers.txt") try: f.write "abc" f.write "def" finally: close(f) ``` When `defer` is at the outermost scope of a template/macro, its scope extends to the block where the template/macro is called from: ```nim test = "nim c $1" template safeOpenDefer(f, path) = var f = open(path, fmWrite) defer: close(f) template safeOpenFinally(f, path, body) = var f = open(path, fmWrite) try: body # without `defer`, `body` must be specified as parameter finally: close(f) block: safeOpenDefer(f, "/tmp/z01.txt") f.write "abc" block: safeOpenFinally(f, "/tmp/z01.txt"): f.write "abc" # adds a lexical scope block: var f = open("/tmp/z01.txt", fmWrite) try: f.write "abc" # adds a lexical scope finally: close(f) ``` Top-level `defer` statements are not supported since it's unclear what such a statement should refer to. Raise statement --------------- Example: ```nim raise newException(IOError, "IO failed") ``` Apart from built-in operations like array indexing, memory allocation, etc. the `raise` statement is the only way to raise an exception. .. XXX document this better! If no exception name is given, the current exception is `re-raised`:idx:. The `ReraiseDefect`:idx: exception is raised if there is no exception to re-raise. It follows that the `raise` statement *always* raises an exception. Exception hierarchy ------------------- The exception tree is defined in the [system](system.html) module. Every exception inherits from `system.Exception`. Exceptions that indicate programming bugs inherit from `system.Defect` (which is a subtype of `Exception`) and are strictly speaking not catchable as they can also be mapped to an operation that terminates the whole process. If panics are turned into exceptions, these exceptions inherit from `Defect`. Exceptions that indicate any other runtime error that can be caught inherit from `system.CatchableError` (which is a subtype of `Exception`). ``` Exception |-- CatchableError | |-- IOError | | `-- EOFError | |-- OSError | |-- ResourceExhaustedError | `-- ValueError | `-- KeyError `-- Defect |-- AccessViolationDefect |-- ArithmeticDefect | |-- DivByZeroDefect | `-- OverflowDefect |-- AssertionDefect |-- DeadThreadDefect |-- FieldDefect |-- FloatingPointDefect | |-- FloatDivByZeroDefect | |-- FloatInvalidOpDefect | |-- FloatOverflowDefect | |-- FloatUnderflowDefect | `-- InexactDefect |-- IndexDefect |-- NilAccessDefect |-- ObjectAssignmentDefect |-- ObjectConversionDefect |-- OutOfMemoryDefect |-- RangeDefect |-- ReraiseDefect `-- StackOverflowDefect ``` Imported exceptions ------------------- It is possible to raise/catch imported C++ exceptions. Types imported using `importcpp` can be raised or caught. Exceptions are raised by value and caught by reference. Example: ```nim test = "nim cpp -r $1" type CStdException {.importcpp: "std::exception", header: "", inheritable.} = object ## does not inherit from `RootObj`, so we use `inheritable` instead CRuntimeError {.requiresInit, importcpp: "std::runtime_error", header: "".} = object of CStdException ## `CRuntimeError` has no default constructor => `requiresInit` proc what(s: CStdException): cstring {.importcpp: "((char *)#.what())".} proc initRuntimeError(a: cstring): CRuntimeError {.importcpp: "std::runtime_error(@)", constructor.} proc initStdException(): CStdException {.importcpp: "std::exception()", constructor.} proc fn() = let a = initRuntimeError("foo") doAssert $a.what == "foo" var b: cstring try: raise initRuntimeError("foo2") except CStdException as e: doAssert e is CStdException b = e.what() doAssert $b == "foo2" try: raise initStdException() except CStdException: discard try: raise initRuntimeError("foo3") except CRuntimeError as e: b = e.what() except CStdException: doAssert false doAssert $b == "foo3" fn() ``` **Note:** `getCurrentException()` and `getCurrentExceptionMsg()` are not available for imported exceptions from C++. One needs to use the `except ImportedException as x:` syntax and rely on functionality of the `x` object to get exception details. Effect system ============= **Note**: The rules for effect tracking changed with the release of version 1.6 of the Nim compiler. Exception tracking ------------------ Nim supports exception tracking. The `raises`:idx: pragma can be used to explicitly define which exceptions a proc/iterator/method/converter is allowed to raise. The compiler verifies this: ```nim test = "nim c $1" proc p(what: bool) {.raises: [IOError, OSError].} = if what: raise newException(IOError, "IO") else: raise newException(OSError, "OS") ``` An empty `raises` list (`raises: []`) means that no exception may be raised: ```nim proc p(): bool {.raises: [].} = try: unsafeCall() result = true except CatchableError: result = false ``` A `raises` list can also be attached to a proc type. This affects type compatibility: ```nim test = "nim c $1" status = 1 type Callback = proc (s: string) {.raises: [IOError].} var c: Callback proc p(x: string) = raise newException(OSError, "OS") c = p # type error ``` For a routine `p`, the compiler uses inference rules to determine the set of possibly raised exceptions; the algorithm operates on `p`'s call graph: 1. Every indirect call via some proc type `T` is assumed to raise `system.Exception` (the base type of the exception hierarchy) and thus any exception unless `T` has an explicit `raises` list. However, if the call is of the form `f(...)` where `f` is a parameter of the currently analyzed routine that is marked as `.effectsOf: f`, it is ignored. The call is optimistically assumed to have no effect. Rule 2 compensates for this case. 2. Every expression `e` of some proc type within a call that is passed to parameter marked as `.effectsOf` of proc `p` is assumed to be called indirectly and thus its raises list is added to `p`'s raises list. 3. Every call to a proc `q` which has an unknown body (due to a forward declaration) is assumed to raise `system.Exception` unless `q` has an explicit `raises` list. Procs that are `importc`'ed are assumed to have `.raises: []`, unless explicitly declared otherwise. 4. Every call to a method `m` is assumed to raise `system.Exception` unless `m` has an explicit `raises` list. 5. For every other call, the analysis can determine an exact `raises` list. 6. For determining a `raises` list, the `raise` and `try` statements of `p` are taken into consideration. Exceptions inheriting from `system.Defect` are not tracked with the `.raises: []` exception tracking mechanism. This is more consistent with the built-in operations. The following code is valid: ```nim proc mydiv(a, b): int {.raises: [].} = a div b # can raise an DivByZeroDefect ``` And so is: ```nim proc mydiv(a, b): int {.raises: [].} = if b == 0: raise newException(DivByZeroDefect, "division by zero") else: result = a div b ``` The reason for this is that `DivByZeroDefect` inherits from `Defect` and with `--panics:on`:option: Defects become unrecoverable errors. (Since version 1.4 of the language.) EffectsOf annotation -------------------- Rules 1-2 of the exception tracking inference rules (see the previous section) ensure the following works: ```nim proc weDontRaiseButMaybeTheCallback(callback: proc()) {.raises: [], effectsOf: callback.} = callback() proc doRaise() {.raises: [IOError].} = raise newException(IOError, "IO") proc use() {.raises: [].} = # doesn't compile! Can raise IOError! weDontRaiseButMaybeTheCallback(doRaise) ``` As can be seen from the example, a parameter of type `proc (...)` can be annotated as `.effectsOf`. Such a parameter allows for effect polymorphism: The proc `weDontRaiseButMaybeTheCallback` raises the exceptions that `callback` raises. So in many cases a callback does not cause the compiler to be overly conservative in its effect analysis: ```nim test = "nim c $1" status = 1 {.push warningAsError[Effect]: on.} import std/algorithm type MyInt = distinct int var toSort = @[MyInt 1, MyInt 2, MyInt 3] proc cmpN(a, b: MyInt): int = cmp(a.int, b.int) proc harmless {.raises: [].} = toSort.sort cmpN proc cmpE(a, b: MyInt): int {.raises: [Exception].} = cmp(a.int, b.int) proc harmful {.raises: [].} = # does not compile, `sort` can now raise Exception toSort.sort cmpE ``` Tag tracking ------------ Exception tracking is part of Nim's `effect system`:idx:. Raising an exception is an *effect*. Other effects can also be defined. A user defined effect is a means to *tag* a routine and to perform checks against this tag: ```nim test = "nim c --warningAsError:Effect:on $1" status = 1 type IO = object ## input/output effect proc readLine(): string {.tags: [IO].} = discard proc no_effects_please() {.tags: [].} = # the compiler prevents this: let x = readLine() ``` A tag has to be a type name. A `tags` list - like a `raises` list - can also be attached to a proc type. This affects type compatibility. The inference for tag tracking is analogous to the inference for exception tracking. There is also a way which can be used to forbid certain effects: ```nim test = "nim c --warningAsError:Effect:on $1" status = 1 type IO = object ## input/output effect proc readLine(): string {.tags: [IO].} = discard proc echoLine(): void = discard proc no_IO_please() {.forbids: [IO].} = # this is OK because it didn't define any tag: echoLine() # the compiler prevents this: let y = readLine() ``` The `forbids` pragma defines a list of illegal effects - if any statement invokes any of those effects, the compilation will fail. Procedure types with any disallowed effect are the subtypes of equal procedure types without such lists: ```nim type MyEffect = object type ProcType1 = proc (i: int): void {.forbids: [MyEffect].} type ProcType2 = proc (i: int): void proc caller1(p: ProcType1): void = p(1) proc caller2(p: ProcType2): void = p(1) proc effectful(i: int): void {.tags: [MyEffect].} = echo $i proc effectless(i: int): void {.forbids: [MyEffect].} = echo $i proc toBeCalled1(i: int): void = effectful(i) proc toBeCalled2(i: int): void = effectless(i) ## this will fail because toBeCalled1 uses MyEffect which was forbidden by ProcType1: caller1(toBeCalled1) ## this is OK because both toBeCalled2 and ProcType1 have the same requirements: caller1(toBeCalled2) ## these are OK because ProcType2 doesn't have any effect requirement: caller2(toBeCalled1) caller2(toBeCalled2) ``` `ProcType2` is a subtype of `ProcType1`. Unlike with the `tags` pragma, the parent context - the function which calls other functions with forbidden effects - doesn't inherit the forbidden list of effects. Side effects ------------ The `noSideEffect` pragma is used to mark a proc/iterator that can have only side effects through parameters. This means that the proc/iterator only changes locations that are reachable from its parameters and the return value only depends on the parameters. If none of its parameters have the type `var`, `ref`, `ptr`, `cstring`, or `proc`, then no locations are modified. In other words, a routine has no side effects if it does not access a threadlocal or global variable and it does not call any routine that has a side effect. It is a static error to mark a proc/iterator to have no side effect if the compiler cannot verify this. As a special semantic rule, the built-in [debugEcho]( system.html#debugEcho,varargs[typed,]) pretends to be free of side effects so that it can be used for debugging routines marked as `noSideEffect`. `func` is syntactic sugar for a proc with no side effects: ```nim func `+` (x, y: int): int ``` To override the compiler's side effect analysis a `{.noSideEffect.}` `cast` pragma block can be used: ```nim func f() = {.cast(noSideEffect).}: echo "test" ``` **Side effects are usually inferred. The inference for side effects is analogous to the inference for exception tracking.** When the compiler cannot infer side effects, as is the case for imported functions, one can annotate them with the `sideEffect` pragma. GC safety effect ---------------- We call a proc `p` `GC safe`:idx: when it doesn't access any global variable that contains GC'ed memory (`string`, `seq`, `ref` or a closure) either directly or indirectly through a call to a GC unsafe proc. **The GC safety property is usually inferred. The inference for GC safety is analogous to the inference for exception tracking.** The `gcsafe`:idx: annotation can be used to mark a proc to be gcsafe, otherwise this property is inferred by the compiler. Note that `noSideEffect` implies `gcsafe`. Routines that are imported from C are always assumed to be `gcsafe`. To override the compiler's gcsafety analysis a `{.cast(gcsafe).}` pragma block can be used: ```nim var someGlobal: string = "some string here" perThread {.threadvar.}: string proc setPerThread() = {.cast(gcsafe).}: deepCopy(perThread, someGlobal) ``` See also: - [Shared heap memory management](mm.html). Effects pragma -------------- The `effects` pragma has been designed to assist the programmer with the effects analysis. It is a statement that makes the compiler output all inferred effects up to the `effects`'s position: ```nim proc p(what: bool) = if what: raise newException(IOError, "IO") {.effects.} else: raise newException(OSError, "OS") ``` The compiler produces a hint message that `IOError` can be raised. `OSError` is not listed as it cannot be raised in the branch the `effects` pragma appears in. Generics ======== Generics are Nim's means to parametrize procs, iterators or types with `type parameters`:idx:. Depending on the context, the brackets are used either to introduce type parameters or to instantiate a generic proc, iterator, or type. The following example shows how a generic binary tree can be modeled: ```nim test = "nim c $1" type BinaryTree*[T] = ref object # BinaryTree is a generic type with # generic parameter `T` le, ri: BinaryTree[T] # left and right subtrees; may be nil data: T # the data stored in a node proc newNode*[T](data: T): BinaryTree[T] = # constructor for a node result = BinaryTree[T](le: nil, ri: nil, data: data) proc add*[T](root: var BinaryTree[T], n: BinaryTree[T]) = # insert a node into the tree if root == nil: root = n else: var it = root while it != nil: # compare the data items; uses the generic `cmp` proc # that works for any type that has a `==` and `<` operator var c = cmp(it.data, n.data) if c < 0: if it.le == nil: it.le = n return it = it.le else: if it.ri == nil: it.ri = n return it = it.ri proc add*[T](root: var BinaryTree[T], data: T) = # convenience proc: add(root, newNode(data)) iterator preorder*[T](root: BinaryTree[T]): T = # Preorder traversal of a binary tree. # This uses an explicit stack (which is more efficient than # a recursive iterator factory). var stack: seq[BinaryTree[T]] = @[root] while stack.len > 0: var n = stack.pop() while n != nil: yield n.data add(stack, n.ri) # push right subtree onto the stack n = n.le # and follow the left pointer var root: BinaryTree[string] # instantiate a BinaryTree with `string` add(root, newNode("hello")) # instantiates `newNode` and `add` add(root, "world") # instantiates the second `add` proc for str in preorder(root): stdout.writeLine(str) ``` The `T` is called a `generic type parameter`:idx: or a `type variable`:idx:. Generic Procs --------------- Let's consider the anatomy of a generic `proc` to agree on defined terminology. ```nim p[T: t](arg1: f): y ``` - `p`: Callee symbol - `[...]`: Generic parameters - `T: t`: Generic constraint - `T`: Type variable - `[T: t](arg1: f): y`: Formal signature - `arg1: f`: Formal parameter - `f`: Formal parameter type - `y`: Formal return type The use of the word "formal" here is to denote the symbols as they are defined by the programmer, not as they may be at compile time contextually. Since generics may be instantiated and types bound, we have more than one entity to think about when generics are involved. The usage of a generic will resolve the formally defined expression into an instance of that expression bound to only concrete types. This process is called "instantiation". Brackets at the site of a generic's formal definition specify the "constraints" as in: ```nim type Foo[T] = object proc p[H;T: Foo[H]](param: T): H ``` A constraint definition may have more than one symbol defined by separating each definition by a `;`. Notice how `T` is composed of `H` and the return type of `p` is defined as `H`. When this generic proc is instantiated `H` will be bound to a concrete type, thus making `T` concrete and the return type of `p` will be bound to the same concrete type used to define `H`. Brackets at the site of usage can be used to supply concrete types to instantiate the generic in the same order that the symbols are defined in the constraint. Alternatively, type bindings may be inferred by the compiler in some situations, allowing for cleaner code. Is operator ----------- The `is` operator is evaluated during semantic analysis to check for type equivalence. It is therefore very useful for type specialization within generic code: ```nim type Table[Key, Value] = object keys: seq[Key] values: seq[Value] when not (Key is string): # empty value for strings used for optimization deletedKeys: seq[bool] ``` Type classes ------------ A type class is a special pseudo-type that can be used to match against types in the context of overload resolution or the `is` operator. Nim supports the following built-in type classes: ================== =================================================== type class matches ================== =================================================== `object` any object type `tuple` any tuple type `enum` any enumeration `proc` any proc type `iterator` any iterator type `ref` any `ref` type `ptr` any `ptr` type `var` any `var` type `distinct` any distinct type `array` any array type `set` any set type `seq` any seq type `auto` any type ================== =================================================== Furthermore, every generic type automatically creates a type class of the same name that will match any instantiation of the generic type. Type classes can be combined using the standard boolean operators to form more complex type classes: ```nim # create a type class that will match all tuple and object types type RecordType = (tuple or object) proc printFields[T: RecordType](rec: T) = for key, value in fieldPairs(rec): echo key, " = ", value ``` Type constraints on generic parameters can be grouped with `,` and propagation stops with `;`, similarly to parameters for macros and templates: ```nim proc fn1[T; U, V: SomeFloat]() = discard # T is unconstrained template fn2(t; u, v: SomeFloat) = discard # t is unconstrained ``` Whilst the syntax of type classes appears to resemble that of ADTs/algebraic data types in ML-like languages, it should be understood that type classes are static constraints to be enforced at type instantiations. Type classes are not really types in themselves but are instead a system of providing generic "checks" that ultimately *resolve* to some singular type. Type classes do not allow for runtime type dynamism, unlike object variants or methods. As an example, the following would not compile: ```nim type TypeClass = int | string var foo: TypeClass = 2 # foo's type is resolved to an int here foo = "this will fail" # error here, because foo is an int ``` Nim allows for type classes and regular types to be specified as `type constraints`:idx: of the generic type parameter: ```nim proc onlyIntOrString[T: int|string](x, y: T) = discard onlyIntOrString(450, 616) # valid onlyIntOrString(5.0, 0.0) # type mismatch onlyIntOrString("xy", 50) # invalid as 'T' cannot be both at the same time ``` `proc` and `iterator` type classes also accept a calling convention pragma to restrict the calling convention of the matching `proc` or `iterator` type. ```nim proc onlyClosure[T: proc {.closure.}](x: T) = discard onlyClosure(proc() = echo "hello") # valid proc foo() {.nimcall.} = discard onlyClosure(foo) # type mismatch ``` Implicit generics ----------------- A type class can be used directly as the parameter's type. ```nim # create a type class that will match all tuple and object types type RecordType = (tuple or object) proc printFields(rec: RecordType) = for key, value in fieldPairs(rec): echo key, " = ", value ``` Procedures utilizing type classes in such a manner are considered to be `implicitly generic`:idx:. They will be instantiated once for each unique combination of parameter types used within the program. By default, during overload resolution, each named type class will bind to exactly one concrete type. We call such type classes `bind once`:idx: types. Here is an example taken directly from the system module to illustrate this: ```nim proc `==`*(x, y: tuple): bool = ## requires `x` and `y` to be of the same tuple type ## generic `==` operator for tuples that is lifted from the components ## of `x` and `y`. result = true for a, b in fields(x, y): if a != b: result = false ``` Alternatively, the `distinct` type modifier can be applied to the type class to allow each parameter matching the type class to bind to a different type. Such type classes are called `bind many`:idx: types. Procs written with the implicitly generic style will often need to refer to the type parameters of the matched generic type. They can be easily accessed using the dot syntax: ```nim type Matrix[T, Rows, Columns] = object ... proc `[]`(m: Matrix, row, col: int): Matrix.T = m.data[col * high(Matrix.Columns) + row] ``` Here are more examples that illustrate implicit generics: ```nim proc p(t: Table; k: Table.Key): Table.Value # is roughly the same as: proc p[Key, Value](t: Table[Key, Value]; k: Key): Value ``` ```nim proc p(a: Table, b: Table) # is roughly the same as: proc p[Key, Value](a, b: Table[Key, Value]) ``` ```nim proc p(a: Table, b: distinct Table) # is roughly the same as: proc p[Key, Value, KeyB, ValueB](a: Table[Key, Value], b: Table[KeyB, ValueB]) ``` `typedesc` used as a parameter type also introduces an implicit generic. `typedesc` has its own set of rules: ```nim proc p(a: typedesc) # is roughly the same as: proc p[T](a: typedesc[T]) ``` `typedesc` is a "bind many" type class: ```nim proc p(a, b: typedesc) # is roughly the same as: proc p[T, T2](a: typedesc[T], b: typedesc[T2]) ``` A parameter of type `typedesc` is itself usable as a type. If it is used as a type, it's the underlying type. In other words, one level of "typedesc"-ness is stripped off: ```nim proc p(a: typedesc; b: a) = discard # is roughly the same as: proc p[T](a: typedesc[T]; b: T) = discard # hence this is a valid call: p(int, 4) # as parameter 'a' requires a type, but 'b' requires a value. ``` Generic inference restrictions ------------------------------ The types `var T` and `typedesc[T]` cannot be inferred in a generic instantiation. The following is not allowed: ```nim test = "nim c $1" status = 1 proc g[T](f: proc(x: T); x: T) = f(x) proc c(y: int) = echo y proc v(y: var int) = y += 100 var i: int # allowed: infers 'T' to be of type 'int' g(c, 42) # not valid: 'T' is not inferred to be of type 'var int' g(v, i) # also not allowed: explicit instantiation via 'var int' g[var int](v, i) ``` Symbol lookup in generics ------------------------- ### Open and Closed symbols The symbol binding rules in generics are slightly subtle: There are "open" and "closed" symbols. A "closed" symbol cannot be re-bound in the instantiation context, an "open" symbol can. Per default, overloaded symbols are open and every other symbol is closed. Open symbols are looked up in two different contexts: Both the context at definition and the context at instantiation are considered: ```nim test = "nim c $1" type Index = distinct int proc `==` (a, b: Index): bool {.borrow.} var a = (0, 0.Index) var b = (0, 0.Index) echo a == b # works! ``` In the example, the [generic `==` for tuples](system.html#%3D%3D%2CT%2CT_2) (as defined in the system module) uses the `==` operators of the tuple's components. However, the `==` for the `Index` type is defined *after* the `==` for tuples; yet the example compiles as the instantiation takes the currently defined symbols into account too. Mixin statement --------------- A symbol can be forced to be open by a `mixin`:idx: declaration: ```nim test = "nim c $1" proc create*[T](): ref T = # there is no overloaded 'init' here, so we need to state that it's an # open symbol explicitly: mixin init new result init result ``` `mixin` statements only make sense in templates and generics. Bind statement -------------- The `bind` statement is the counterpart to the `mixin` statement. It can be used to explicitly declare identifiers that should be bound early (i.e. the identifiers should be looked up in the scope of the template/generic definition): ```nim # Module A var lastId = 0 template genId*: untyped = bind lastId inc(lastId) lastId ``` ```nim # Module B import A echo genId() ``` But a `bind` is rarely useful because symbol binding from the definition scope is the default. `bind` statements only make sense in templates and generics. Delegating bind statements -------------------------- The following example outlines a problem that can arise when generic instantiations cross multiple different modules: ```nim # module A proc genericA*[T](x: T) = mixin init init(x) ``` ```nim import C # module B proc genericB*[T](x: T) = # Without the `bind init` statement C's init proc is # not available when `genericB` is instantiated: bind init genericA(x) ``` ```nim # module C type O = object proc init*(x: var O) = discard ``` ```nim # module main import B, C genericB O() ``` In module B has an `init` proc from module C in its scope that is not taken into account when `genericB` is instantiated which leads to the instantiation of `genericA`. The solution is to `forward`:idx: these symbols by a `bind` statement inside `genericB`. Templates ========= A template is a simple form of a macro: It is a simple substitution mechanism that operates on Nim's abstract syntax trees. It is processed in the semantic pass of the compiler. The syntax to *invoke* a template is the same as calling a procedure. Example: ```nim template `!=` (a, b: untyped): untyped = # this definition exists in the system module not (a == b) assert(5 != 6) # the compiler rewrites that to: assert(not (5 == 6)) ``` The `!=`, `>`, `>=`, `in`, `notin`, `isnot` operators are in fact templates: | `a > b` is transformed into `b < a`. | `a in b` is transformed into `contains(b, a)`. | `notin` and `isnot` have the obvious meanings. The "types" of templates can be the symbols `untyped`, `typed` or `typedesc`. These are "meta types", they can only be used in certain contexts. Regular types can be used too; this implies that `typed` expressions are expected. Typed vs untyped parameters --------------------------- An `untyped` parameter means that symbol lookups and type resolution is not performed before the expression is passed to the template. This means that *undeclared* identifiers, for example, can be passed to the template: ```nim test = "nim c $1" template declareInt(x: untyped) = var x: int declareInt(x) # valid x = 3 ``` ```nim test = "nim c $1" status = 1 template declareInt(x: typed) = var x: int declareInt(x) # invalid, because x has not been declared and so it has no type ``` A template where every parameter is `untyped` is called an `immediate`:idx: template. For historical reasons, templates can be explicitly annotated with an `immediate` pragma and then these templates do not take part in overloading resolution and the parameters' types are *ignored* by the compiler. Explicit immediate templates are now deprecated. **Note**: For historical reasons, `stmt` was an alias for `typed` and `expr` was an alias for `untyped`, but they are removed. Passing a code block to a template ---------------------------------- One can pass a block of statements as the last argument to a template following the special `:` syntax: ```nim test = "nim c $1" template withFile(f, fn, mode, actions: untyped): untyped = var f: File if open(f, fn, mode): try: actions finally: close(f) else: quit("cannot open: " & fn) withFile(txt, "ttempl3.txt", fmWrite): # special colon txt.writeLine("line 1") txt.writeLine("line 2") ``` In the example, the two `writeLine` statements are bound to the `actions` parameter. Usually, to pass a block of code to a template, the parameter that accepts the block needs to be of type `untyped`. Because symbol lookups are then delayed until template instantiation time: ```nim test = "nim c $1" status = 1 template t(body: typed) = proc p = echo "hey" block: body t: p() # fails with 'undeclared identifier: p' ``` The above code fails with the error message that `p` is not declared. The reason for this is that the `p()` body is type-checked before getting passed to the `body` parameter and type checking in Nim implies symbol lookups. The same code works with `untyped` as the passed body is not required to be type-checked: ```nim test = "nim c $1" template t(body: untyped) = proc p = echo "hey" block: body t: p() # compiles ``` Varargs of untyped ------------------ In addition to the `untyped` meta-type that prevents type checking, there is also `varargs[untyped]` so that not even the number of parameters is fixed: ```nim test = "nim c $1" template hideIdentifiers(x: varargs[untyped]) = discard hideIdentifiers(undeclared1, undeclared2) ``` However, since a template cannot iterate over varargs, this feature is generally much more useful for macros. Symbol binding in templates --------------------------- A template is a `hygienic`:idx: macro and so opens a new scope. Most symbols are bound from the definition scope of the template: ```nim # Module A var lastId = 0 template genId*: untyped = inc(lastId) lastId ``` ```nim # Module B import A echo genId() # Works as 'lastId' has been bound in 'genId's defining scope ``` As in generics, symbol binding can be influenced via `mixin` or `bind` statements. Identifier construction ----------------------- In templates, identifiers can be constructed with the backticks notation: ```nim test = "nim c $1" template typedef(name: untyped, typ: typedesc) = type `T name`* {.inject.} = typ `P name`* {.inject.} = ref `T name` typedef(myint, int) var x: PMyInt ``` In the example, `name` is instantiated with `myint`, so \`T name\` becomes `Tmyint`. Lookup rules for template parameters ------------------------------------ A parameter `p` in a template is even substituted in the expression `x.p`. Thus, template arguments can be used as field names and a global symbol can be shadowed by the same argument name even when fully qualified: ```nim # module 'm' type Lev = enum levA, levB var abclev = levB template tstLev(abclev: Lev) = echo abclev, " ", m.abclev tstLev(levA) # produces: 'levA levA' ``` But the global symbol can properly be captured by a `bind` statement: ```nim # module 'm' type Lev = enum levA, levB var abclev = levB template tstLev(abclev: Lev) = bind m.abclev echo abclev, " ", m.abclev tstLev(levA) # produces: 'levA levB' ``` Hygiene in templates -------------------- Per default, templates are `hygienic`:idx:\: Local identifiers declared in a template cannot be accessed in the instantiation context: ```nim test = "nim c $1" template newException*(exceptn: typedesc, message: string): untyped = var e: ref exceptn # e is implicitly gensym'ed here new(e) e.msg = message e # so this works: let e = "message" raise newException(IoError, e) ``` Whether a symbol that is declared in a template is exposed to the instantiation scope is controlled by the `inject`:idx: and `gensym`:idx: pragmas: `gensym`'ed symbols are not exposed but `inject`'ed symbols are. The default for symbols of entity `type`, `var`, `let` and `const` is `gensym`. For `proc`, `iterator`, `converter`, `template`, `macro`, the default is `inject`, but if a `gensym` symbol with the same name is defined in the same syntax-level scope, it will be `gensym` by default. This can be overriden by marking the routine as `inject`. If the name of the entity is passed as a template parameter, it is an `inject`'ed symbol: ```nim template withFile(f, fn, mode: untyped, actions: untyped): untyped = block: var f: File # since 'f' is a template parameter, it's injected implicitly ... withFile(txt, "ttempl3.txt", fmWrite): txt.writeLine("line 1") txt.writeLine("line 2") ``` The `inject` and `gensym` pragmas are second class annotations; they have no semantics outside a template definition and cannot be abstracted over: ```nim {.pragma myInject: inject.} template t() = var x {.myInject.}: int # does NOT work ``` To get rid of hygiene in templates, one can use the `dirty`:idx: pragma for a template. `inject` and `gensym` have no effect in `dirty` templates. `gensym`'ed symbols cannot be used as `field` in the `x.field` syntax. Nor can they be used in the `ObjectConstruction(field: value)` and `namedParameterCall(field = value)` syntactic constructs. The reason for this is that code like ```nim test = "nim c $1" type T = object f: int template tmp(x: T) = let f = 34 echo x.f, T(f: 4) ``` should work as expected. However, this means that the method call syntax is not available for `gensym`'ed symbols: ```nim test = "nim c $1" status = 1 template tmp(x) = type T {.gensym.} = int echo x.T # invalid: instead use: 'echo T(x)'. tmp(12) ``` Limitations of the method call syntax ------------------------------------- The expression `x` in `x.f` needs to be semantically checked (that means symbol lookup and type checking) before it can be decided that it needs to be rewritten to `f(x)`. Therefore, the dot syntax has some limitations when it is used to invoke templates/macros: ```nim test = "nim c $1" status = 1 template declareVar(name: untyped) = const name {.inject.} = 45 # Doesn't compile: unknownIdentifier.declareVar ``` It is also not possible to use fully qualified identifiers with module symbol in method call syntax. The order in which the dot operator binds to symbols prohibits this. ```nim test = "nim c $1" status = 1 import std/sequtils var myItems = @[1,3,3,7] let N1 = count(myItems, 3) # OK let N2 = sequtils.count(myItems, 3) # fully qualified, OK let N3 = myItems.count(3) # OK let N4 = myItems.sequtils.count(3) # illegal, `myItems.sequtils` can't be resolved ``` This means that when for some reason a procedure needs a disambiguation through the module name, the call needs to be written in function call syntax. Macros ====== A macro is a special function that is executed at compile time. Normally, the input for a macro is an abstract syntax tree (AST) of the code that is passed to it. The macro can then do transformations on it and return the transformed AST. This can be used to add custom language features and implement `domain-specific languages`:idx:. Macro invocation is a case where semantic analysis does **not** entirely proceed top to bottom and left to right. Instead, semantic analysis happens at least twice: * Semantic analysis recognizes and resolves the macro invocation. * The compiler executes the macro body (which may invoke other procs). * It replaces the AST of the macro invocation with the AST returned by the macro. * It repeats semantic analysis of that region of the code. * If the AST returned by the macro contains other macro invocations, this process iterates. While macros enable advanced compile-time code transformations, they cannot change Nim's syntax. **Style note:** For code readability, it is best to use the least powerful programming construct that remains expressive. So the "check list" is: (1) Use an ordinary proc/iterator, if possible. (2) Else: Use a generic proc/iterator, if possible. (3) Else: Use a template, if possible. (4) Else: Use a macro. Debug example ------------- The following example implements a powerful `debug` command that accepts a variable number of arguments: ```nim test = "nim c $1" # to work with Nim syntax trees, we need an API that is defined in the # `macros` module: import std/macros macro debug(args: varargs[untyped]): untyped = # `args` is a collection of `NimNode` values that each contain the # AST for an argument of the macro. A macro always has to # return a `NimNode`. A node of kind `nnkStmtList` is suitable for # this use case. result = nnkStmtList.newTree() # iterate over any argument that is passed to this macro: for n in args: # add a call to the statement list that writes the expression; # `toStrLit` converts an AST to its string representation: result.add newCall("write", newIdentNode("stdout"), newLit(n.repr)) # add a call to the statement list that writes ": " result.add newCall("write", newIdentNode("stdout"), newLit(": ")) # add a call to the statement list that writes the expressions value: result.add newCall("writeLine", newIdentNode("stdout"), n) var a: array[0..10, int] x = "some string" a[0] = 42 a[1] = 45 debug(a[0], a[1], x) ``` The macro call expands to: ```nim write(stdout, "a[0]") write(stdout, ": ") writeLine(stdout, a[0]) write(stdout, "a[1]") write(stdout, ": ") writeLine(stdout, a[1]) write(stdout, "x") write(stdout, ": ") writeLine(stdout, x) ``` Arguments that are passed to a `varargs` parameter are wrapped in an array constructor expression. This is why `debug` iterates over all of `args`'s children. bindSym ------- The above `debug` macro relies on the fact that `write`, `writeLine` and `stdout` are declared in the system module and are thus visible in the instantiating context. There is a way to use bound identifiers (aka `symbols`:idx:) instead of using unbound identifiers. The `bindSym` builtin can be used for that: ```nim test = "nim c $1" import std/macros macro debug(n: varargs[typed]): untyped = result = newNimNode(nnkStmtList, n) for x in n: # we can bind symbols in scope via 'bindSym': add(result, newCall(bindSym"write", bindSym"stdout", toStrLit(x))) add(result, newCall(bindSym"write", bindSym"stdout", newStrLitNode(": "))) add(result, newCall(bindSym"writeLine", bindSym"stdout", x)) var a: array[0..10, int] x = "some string" a[0] = 42 a[1] = 45 debug(a[0], a[1], x) ``` The macro call expands to: ```nim write(stdout, "a[0]") write(stdout, ": ") writeLine(stdout, a[0]) write(stdout, "a[1]") write(stdout, ": ") writeLine(stdout, a[1]) write(stdout, "x") write(stdout, ": ") writeLine(stdout, x) ``` In this version of `debug`, the symbols `write`, `writeLine` and `stdout` are already bound and are not looked up again. As the example shows, `bindSym` does work with overloaded symbols implicitly. Note that the symbol names passed to `bindSym` have to be constant. The experimental feature `dynamicBindSym` ([experimental manual]( manual_experimental.html#dynamic-arguments-for-bindsym)) allows this value to be computed dynamically. Post-statement blocks --------------------- Macros can receive `of`, `elif`, `else`, `except`, `finally` and `do` blocks (including their different forms such as `do` with routine parameters) as arguments if called in statement form. ```nim macro performWithUndo(task, undo: untyped) = ... performWithUndo do: # multiple-line block of code # to perform the task do: # code to undo it let num = 12 # a single colon may be used if there is no initial block match (num mod 3, num mod 5): of (0, 0): echo "FizzBuzz" of (0, _): echo "Fizz" of (_, 0): echo "Buzz" else: echo num ``` For loop macro -------------- A macro that takes as its only input parameter an expression of the special type `system.ForLoopStmt` can rewrite the entirety of a `for` loop: ```nim test = "nim c $1" import std/macros macro example(loop: ForLoopStmt) = result = newTree(nnkForStmt) # Create a new For loop. result.add loop[^3] # This is "item". result.add loop[^2][^1] # This is "[1, 2, 3]". result.add newCall(bindSym"echo", loop[0]) for item in example([1, 2, 3]): discard ``` Expands to: ```nim for item in items([1, 2, 3]): echo item ``` Another example: ```nim test = "nim c $1" import std/macros macro enumerate(x: ForLoopStmt): untyped = expectKind x, nnkForStmt # check if the starting count is specified: var countStart = if x[^2].len == 2: newLit(0) else: x[^2][1] result = newStmtList() # we strip off the first for loop variable and use it as an integer counter: result.add newVarStmt(x[0], countStart) var body = x[^1] if body.kind != nnkStmtList: body = newTree(nnkStmtList, body) body.add newCall(bindSym"inc", x[0]) var newFor = newTree(nnkForStmt) for i in 1..x.len-3: newFor.add x[i] # transform enumerate(X) to 'X' newFor.add x[^2][^1] newFor.add body result.add newFor # now wrap the whole macro in a block to create a new scope result = quote do: block: `result` for a, b in enumerate(items([1, 2, 3])): echo a, " ", b # without wrapping the macro in a block, we'd need to choose different # names for `a` and `b` here to avoid redefinition errors for a, b in enumerate(10, [1, 2, 3, 5]): echo a, " ", b ``` Case statement macros --------------------- Macros named `` `case` `` can provide implementations of `case` statements for certain types. The following is an example of such an implementation for tuples, leveraging the existing equality operator for tuples (as provided in `system.==`): ```nim test = "nim c $1" import std/macros macro `case`(n: tuple): untyped = result = newTree(nnkIfStmt) let selector = n[0] for i in 1 ..< n.len: let it = n[i] case it.kind of nnkElse, nnkElifBranch, nnkElifExpr, nnkElseExpr: result.add it of nnkOfBranch: for j in 0..it.len-2: let cond = newCall("==", selector, it[j]) result.add newTree(nnkElifBranch, cond, it[^1]) else: error "custom 'case' for tuple cannot handle this node", it case ("foo", 78) of ("foo", 78): echo "yes" of ("bar", 88): echo "no" else: discard ``` `case` macros are subject to overload resolution. The type of the `case` statement's selector expression is matched against the type of the first argument of the `case` macro. Then the complete `case` statement is passed in place of the argument and the macro is evaluated. In other words, the macro needs to transform the full `case` statement but only the statement's selector expression is used to determine which macro to call. Special Types ============= static\[T] ---------- As their name suggests, static parameters must be constant expressions: ```nim proc precompiledRegex(pattern: static string): RegEx = var res {.global.} = re(pattern) return res precompiledRegex("/d+") # Replaces the call with a precompiled # regex, stored in a global variable precompiledRegex(paramStr(1)) # Error, command-line options # are not constant expressions ``` For the purposes of code generation, all static parameters are treated as generic parameters - the proc will be compiled separately for each unique supplied value (or combination of values). Static parameters can also appear in the signatures of generic types: ```nim type Matrix[M,N: static int; T: Number] = array[0..(M*N - 1), T] # Note how `Number` is just a type constraint here, while # `static int` requires us to supply an int value AffineTransform2D[T] = Matrix[3, 3, T] AffineTransform3D[T] = Matrix[4, 4, T] var m1: AffineTransform3D[float] # OK var m2: AffineTransform2D[string] # Error, `string` is not a `Number` ``` Please note that `static T` is just a syntactic convenience for the underlying generic type `static[T]`. The type parameter can be omitted to obtain the type class of all constant expressions. A more specific type class can be created by instantiating `static` with another type class. One can force an expression to be evaluated at compile time as a constant expression by coercing it to a corresponding `static` type: ```nim import std/math echo static(fac(5)), " ", static[bool](16.isPowerOfTwo) ``` The compiler will report any failure to evaluate the expression or a possible type mismatch error. typedesc\[T] ------------ In many contexts, Nim treats the names of types as regular values. These values exist only during the compilation phase, but since all values must have a type, `typedesc` is considered their special type. `typedesc` acts as a generic type. For instance, the type of the symbol `int` is `typedesc[int]`. Just like with regular generic types, when the generic parameter is omitted, `typedesc` denotes the type class of all types. As a syntactic convenience, one can also use `typedesc` as a modifier. Procs featuring `typedesc` parameters are considered implicitly generic. They will be instantiated for each unique combination of supplied types, and within the body of the proc, the name of each parameter will refer to the bound concrete type: ```nim proc new(T: typedesc): ref T = echo "allocating ", T.name new(result) var n = Node.new var tree = new(BinaryTree[int]) ``` When multiple type parameters are present, they will bind freely to different types. To force a bind-once behavior, one can use an explicit generic parameter: ```nim proc acceptOnlyTypePairs[T, U](A, B: typedesc[T]; C, D: typedesc[U]) ``` Once bound, type parameters can appear in the rest of the proc signature: ```nim test = "nim c $1" template declareVariableWithType(T: typedesc, value: T) = var x: T = value declareVariableWithType int, 42 ``` Overload resolution can be further influenced by constraining the set of types that will match the type parameter. This works in practice by attaching attributes to types via templates. The constraint can be a concrete type or a type class. ```nim test = "nim c $1" template maxval(T: typedesc[int]): int = high(int) template maxval(T: typedesc[float]): float = Inf var i = int.maxval var f = float.maxval when false: var s = string.maxval # error, maxval is not implemented for string template isNumber(t: typedesc[object]): string = "Don't think so." template isNumber(t: typedesc[SomeInteger]): string = "Yes!" template isNumber(t: typedesc[SomeFloat]): string = "Maybe, could be NaN." echo "is int a number? ", isNumber(int) echo "is float a number? ", isNumber(float) echo "is RootObj a number? ", isNumber(RootObj) ``` Passing `typedesc` is almost identical, just with the difference that the macro is not instantiated generically. The type expression is simply passed as a `NimNode` to the macro, like everything else. ```nim import std/macros macro forwardType(arg: typedesc): typedesc = # `arg` is of type `NimNode` let tmp: NimNode = arg result = tmp var tmp: forwardType(int) ``` typeof operator --------------- **Note**: `typeof(x)` can for historical reasons also be written as `type(x)` but `type(x)` is discouraged. One can obtain the type of a given expression by constructing a `typeof` value from it (in many other languages this is known as the `typeof`:idx: operator): ```nim var x = 0 var y: typeof(x) # y has type int ``` If `typeof` is used to determine the result type of a proc/iterator/converter call `c(X)` (where `X` stands for a possibly empty list of arguments), the interpretation, where `c` is an iterator, is preferred over the other interpretations, but this behavior can be changed by passing `typeOfProc` as the second argument to `typeof`: ```nim test = "nim c $1" iterator split(s: string): string = discard proc split(s: string): seq[string] = discard # since an iterator is the preferred interpretation, this has the type `string`: assert typeof("a b c".split) is string assert typeof("a b c".split, typeOfProc) is seq[string] ``` Modules ======= Nim supports splitting a program into pieces by a module concept. Each module needs to be in its own file and has its own `namespace`:idx:. Modules enable `information hiding`:idx: and `separate compilation`:idx:. A module may gain access to the symbols of another module by the `import`:idx: statement. `Recursive module dependencies`:idx: are allowed, but are slightly subtle. Only top-level symbols that are marked with an asterisk (`*`) are exported. A valid module name can only be a valid Nim identifier (and thus its filename is ``identifier.nim``). The algorithm for compiling modules is: - Compile the whole module as usual, following import statements recursively. - If there is a cycle, only import the already parsed symbols (that are exported); if an unknown identifier occurs then abort. This is best illustrated by an example: ```nim # Module A type T1* = int # Module A exports the type `T1` import B # the compiler starts parsing B proc main() = var i = p(3) # works because B has been parsed completely here main() ``` ```nim # Module B import A # A is not parsed here! Only the already known symbols # of A are imported. proc p*(x: A.T1): A.T1 = # this works because the compiler has already # added T1 to A's interface symbol table result = x + 1 ``` Import statement ---------------- After the `import` keyword, a list of module names can follow or a single module name followed by an `except` list to prevent some symbols from being imported: ```nim test = "nim c $1" status = 1 import std/strutils except `%`, toUpperAscii # doesn't work then: echo "$1" % "abc".toUpperAscii ``` It is not checked that the `except` list is really exported from the module. This feature allows us to compile against different versions of the module, even when one version does not export some of these identifiers. The `import` statement is only allowed at the top level. String literals can be used for import/include statements. The compiler performs [path substitution](nimc.html#compiler-usage-commandminusline-switches) when used. Include statement ----------------- The `include` statement does something fundamentally different than importing a module: it merely includes the contents of a file. The `include` statement is useful to split up a large module into several files: ```nim include fileA, fileB, fileC ``` The `include` statement can be used outside the top level, as such: ```nim # Module A echo "Hello World!" ``` ```nim # Module B proc main() = include A main() # => Hello World! ``` Module names in imports ----------------------- A module alias can be introduced via the `as` keyword, after which the original module name is inaccessible: ```nim import std/strutils as su, std/sequtils as qu echo su.format("$1", "lalelu") ``` The notations `path/to/module` or `"path/to/module"` can be used to refer to a module in subdirectories: ```nim import lib/pure/os, "lib/pure/times" ``` Note that the module name is still `strutils` and not `lib/pure/strutils`, thus one **cannot** do: ```nim import lib/pure/strutils echo lib/pure/strutils.toUpperAscii("abc") ``` Likewise, the following does not make sense as the name is `strutils` already: ```nim import lib/pure/strutils as strutils ``` Collective imports from a directory ----------------------------------- The syntax `import dir / [moduleA, moduleB]` can be used to import multiple modules from the same directory. Path names are syntactically either Nim identifiers or string literals. If the path name is not a valid Nim identifier it needs to be a string literal: ```nim import "gfx/3d/somemodule" # in quotes because '3d' is not a valid Nim identifier ``` Pseudo import/include paths --------------------------- A directory can also be a so-called "pseudo directory". They can be used to avoid ambiguity when there are multiple modules with the same path. There are two pseudo directories: 1. `std`: The `std` pseudo directory is the abstract location of Nim's standard library. For example, the syntax `import std / strutils` is used to unambiguously refer to the standard library's `strutils` module. 2. `pkg`: The `pkg` pseudo directory is used to unambiguously refer to a Nimble package. However, for technical details that lie outside the scope of this document, its semantics are: *Use the search path to look for module name but ignore the standard library locations*. In other words, it is the opposite of `std`. It is recommended and preferred but not currently enforced that all stdlib module imports include the std/ "pseudo directory" as part of the import name. From import statement --------------------- After the `from` keyword, a module name followed by an `import` to list the symbols one likes to use without explicit full qualification: ```nim test = "nim c $1" from std/strutils import `%` echo "$1" % "abc" # always possible: full qualification: echo strutils.replace("abc", "a", "z") ``` It's also possible to use `from module import nil` if one wants to import the module but wants to enforce fully qualified access to every symbol in `module`. Export statement ---------------- An `export` statement can be used for symbol forwarding so that client modules don't need to import a module's dependencies: ```nim # module B type MyObject* = object ``` ```nim # module A import B export B.MyObject proc `$`*(x: MyObject): string = "my object" ``` ```nim # module C import A # B.MyObject has been imported implicitly here: var x: MyObject echo $x ``` When the exported symbol is another module, all of its definitions will be forwarded. One can use an `except` list to exclude some of the symbols. Notice that when exporting, one needs to specify only the module name: ```nim import foo/bar/baz export baz ``` Scope rules ----------- Identifiers are valid from the point of their declaration until the end of the block in which the declaration occurred. The range where the identifier is known is the scope of the identifier. The exact scope of an identifier depends on the way it was declared. ### Block scope The *scope* of a variable declared in the declaration part of a block is valid from the point of declaration until the end of the block. If a block contains a second block, in which the identifier is redeclared, then inside this block, the second declaration will be valid. Upon leaving the inner block, the first declaration is valid again. An identifier cannot be redefined in the same block, except if valid for procedure or iterator overloading purposes. ### Tuple or object scope The field identifiers inside a tuple or object definition are valid in the following places: * To the end of the tuple/object definition. * Field designators of a variable of the given tuple/object type. * In all descendant types of the object type. ### Module scope All identifiers of a module are valid from the point of declaration until the end of the module. Identifiers from indirectly dependent modules are *not* available. The `system`:idx: module is automatically imported in every module. If a module imports the same identifier from two different modules, the identifier is considered ambiguous, which can be resolved in the following ways: * Qualifying the identifier as `module.identifier` resolves ambiguity between modules. (See below for the case that the module name itself is ambiguous.) * Calling the identifier as a routine makes overload resolution take place, which resolves ambiguity in the case that one overload matches stronger than the others. * Using the identifier in a context where the compiler can infer the type of the identifier resolves ambiguity in the case that one definition matches the type stronger than the others. ```nim # Module A var x*: string proc foo*(a: string) = echo "A: ", a ``` ```nim # Module B var x*: int proc foo*(b: int) = echo "B: ", b ``` ```nim # Module C import A, B foo("abc") # A: abc foo(123) # B: 123 let inferred: proc (x: string) = foo foo("def") # A: def write(stdout, x) # error: x is ambiguous write(stdout, A.x) # no error: qualifier used proc bar(a: int): int = a + 1 assert bar(x) == x + 1 # no error: only A.x of type int matches var x = 4 write(stdout, x) # not ambiguous: uses the module C's x ``` Modules can share their name, however, when trying to qualify an identifier with the module name the compiler will fail with ambiguous identifier error. One can qualify the identifier by aliasing the module. ```nim # Module A/C proc fb* = echo "fizz" ``` ```nim # Module B/C proc fb* = echo "buzz" ``` ```nim import A/C import B/C C.fb() # Error: ambiguous identifier: 'C' ``` ```nim import A/C as fizz import B/C fizz.fb() # Works ``` Packages -------- A collection of modules in a file tree with an ``identifier.nimble`` file in the root of the tree is called a Nimble package. A valid package name can only be a valid Nim identifier and thus its filename is ``identifier.nimble`` where ``identifier`` is the desired package name. A module without a ``.nimble`` file is assigned the package identifier: `unknown`. The distinction between packages allows diagnostic compiler messages to be scoped to the current project's package vs foreign packages. Compiler Messages ================= The Nim compiler emits different kinds of messages: `hint`:idx:, `warning`:idx:, and `error`:idx: messages. An *error* message is emitted if the compiler encounters any static error. Pragmas ======= Pragmas are Nim's method to give the compiler additional information / commands without introducing a massive number of new keywords. Pragmas are processed on the fly during semantic checking. Pragmas are enclosed in the special `{.` and `.}` curly brackets. Pragmas are also often used as a first implementation to play with a language feature before a nicer syntax to access the feature becomes available. deprecated pragma ----------------- The deprecated pragma is used to mark a symbol as deprecated: ```nim proc p() {.deprecated.} var x {.deprecated.}: char ``` This pragma can also take in an optional warning string to relay to developers. ```nim proc thing(x: bool) {.deprecated: "use thong instead".} ``` compileTime pragma ------------------ The `compileTime` pragma is used to mark a proc or variable to be used only during compile-time execution. No code will be generated for it. Compile-time procs are useful as helpers for macros. Since version 0.12.0 of the language, a proc that uses `system.NimNode` within its parameter types is implicitly declared `compileTime`: ```nim proc astHelper(n: NimNode): NimNode = result = n ``` Is the same as: ```nim proc astHelper(n: NimNode): NimNode {.compileTime.} = result = n ``` `compileTime` variables are available at runtime too. This simplifies certain idioms where variables are filled at compile-time (for example, lookup tables) but accessed at runtime: ```nim test = "nim c -r $1" import std/macros var nameToProc {.compileTime.}: seq[(string, proc (): string {.nimcall.})] macro registerProc(p: untyped): untyped = result = newTree(nnkStmtList, p) let procName = p[0] let procNameAsStr = $p[0] result.add quote do: nameToProc.add((`procNameAsStr`, `procName`)) proc foo: string {.registerProc.} = "foo" proc bar: string {.registerProc.} = "bar" proc baz: string {.registerProc.} = "baz" doAssert nameToProc[2][1]() == "baz" ``` noreturn pragma --------------- The `noreturn` pragma is used to mark a proc that never returns. acyclic pragma -------------- The `acyclic` pragma can be used for object types to mark them as acyclic even though they seem to be cyclic. This is an **optimization** for the garbage collector to not consider objects of this type as part of a cycle: ```nim type Node = ref NodeObj NodeObj {.acyclic.} = object left, right: Node data: string ``` Or if we directly use a ref object: ```nim type Node {.acyclic.} = ref object left, right: Node data: string ``` In the example, a tree structure is declared with the `Node` type. Note that the type definition is recursive and the GC has to assume that objects of this type may form a cyclic graph. The `acyclic` pragma passes the information that this cannot happen to the GC. If the programmer uses the `acyclic` pragma for data types that are in reality cyclic, this may result in memory leaks, but memory safety is preserved. final pragma ------------ The `final` pragma can be used for an object type to specify that it cannot be inherited from. Note that inheritance is only available for objects that inherit from an existing object (via the `object of SuperType` syntax) or that have been marked as `inheritable`. shallow pragma -------------- The `shallow` pragma affects the semantics of a type: The compiler is allowed to make a shallow copy. This can cause serious semantic issues and break memory safety! However, it can speed up assignments considerably, because the semantics of Nim require deep copying of sequences and strings. This can be expensive, especially if sequences are used to build a tree structure: ```nim type NodeKind = enum nkLeaf, nkInner Node {.shallow.} = object case kind: NodeKind of nkLeaf: strVal: string of nkInner: children: seq[Node] ``` pure pragma ----------- An object type can be marked with the `pure` pragma so that its type field which is used for runtime type identification is omitted. This used to be necessary for binary compatibility with other compiled languages. An enum type can be marked as `pure`. Then access of its fields always requires full qualification. asmNoStackFrame pragma ---------------------- A proc can be marked with the `asmNoStackFrame` pragma to tell the compiler it should not generate a stack frame for the proc. There are also no exit statements like `return result;` generated and the generated C function is declared as `__declspec(naked)`:c: or `__attribute__((naked))`:c: (depending on the used C compiler). **Note**: This pragma should only be used by procs which consist solely of assembler statements. error pragma ------------ The `error` pragma is used to make the compiler output an error message with the given content. The compilation does not necessarily abort after an error though. The `error` pragma can also be used to annotate a symbol (like an iterator or proc). The *usage* of the symbol then triggers a static error. This is especially useful to rule out that some operation is valid due to overloading and type conversions: ```nim ## check that underlying int values are compared and not the pointers: proc `==`(x, y: ptr int): bool {.error.} ``` fatal pragma ------------ The `fatal` pragma is used to make the compiler output an error message with the given content. In contrast to the `error` pragma, the compilation is guaranteed to be aborted by this pragma. Example: ```nim when not defined(objc): {.fatal: "Compile this program with the objc command!".} ``` warning pragma -------------- The `warning` pragma is used to make the compiler output a warning message with the given content. Compilation continues after the warning. hint pragma ----------- The `hint` pragma is used to make the compiler output a hint message with the given content. Compilation continues after the hint. line pragma ----------- The `line` pragma can be used to affect line information of the annotated statement, as seen in stack backtraces: ```nim template myassert*(cond: untyped, msg = "") = if not cond: # change run-time line information of the 'raise' statement: {.line: instantiationInfo().}: raise newException(AssertionDefect, msg) ``` If the `line` pragma is used with a parameter, the parameter needs to be a `tuple[filename: string, line: int]`. If it is used without a parameter, `system.instantiationInfo()` is used. linearScanEnd pragma -------------------- The `linearScanEnd` pragma can be used to tell the compiler how to compile a Nim `case`:idx: statement. Syntactically it has to be used as a statement: ```nim case myInt of 0: echo "most common case" of 1: {.linearScanEnd.} echo "second most common case" of 2: echo "unlikely: use branch table" else: echo "unlikely too: use branch table for ", myInt ``` In the example, the case branches `0` and `1` are much more common than the other cases. Therefore, the generated assembler code should test for these values first so that the CPU's branch predictor has a good chance to succeed (avoiding an expensive CPU pipeline stall). The other cases might be put into a jump table for O(1) overhead but at the cost of a (very likely) pipeline stall. The `linearScanEnd` pragma should be put into the last branch that should be tested against via linear scanning. If put into the last branch of the whole `case` statement, the whole `case` statement uses linear scanning. computedGoto pragma ------------------- The `computedGoto` pragma can be used to tell the compiler how to compile a Nim `case`:idx: in a `while true` statement. Syntactically it has to be used as a statement inside the loop: ```nim type MyEnum = enum enumA, enumB, enumC, enumD, enumE proc vm() = var instructions: array[0..100, MyEnum] instructions[2] = enumC instructions[3] = enumD instructions[4] = enumA instructions[5] = enumD instructions[6] = enumC instructions[7] = enumA instructions[8] = enumB instructions[12] = enumE var pc = 0 while true: {.computedGoto.} let instr = instructions[pc] case instr of enumA: echo "yeah A" of enumC, enumD: echo "yeah CD" of enumB: echo "yeah B" of enumE: break inc(pc) vm() ``` As the example shows, `computedGoto` is mostly useful for interpreters. If the underlying backend (C compiler) does not support the computed goto extension the pragma is simply ignored. immediate pragma ---------------- The immediate pragma is obsolete. See [Typed vs untyped parameters]. redefine pragma --------------- Redefinition of template symbols with the same signature is allowed. This can be made explicit with the `redefine` pragma: ```nim template foo: int = 1 echo foo() # 1 template foo: int {.redefine.} = 2 echo foo() # 2 # warning: implicit redefinition of template template foo: int = 3 ``` This is mostly intended for macro generated code. compilation option pragmas -------------------------- The listed pragmas here can be used to override the code generation options for a proc/method/converter. The implementation currently provides the following possible options (various others may be added later). =============== =============== ============================================ pragma allowed values description =============== =============== ============================================ checks on|off Turns the code generation for all runtime checks on or off. boundChecks on|off Turns the code generation for array bound checks on or off. overflowChecks on|off Turns the code generation for over- or underflow checks on or off. nilChecks on|off Turns the code generation for nil pointer checks on or off. assertions on|off Turns the code generation for assertions on or off. warnings on|off Turns the warning messages of the compiler on or off. hints on|off Turns the hint messages of the compiler on or off. optimization none|speed|size Optimize the code for speed or size, or disable optimization. patterns on|off Turns the term rewriting templates/macros on or off. callconv cdecl|... Specifies the default calling convention for all procedures (and procedure types) that follow. =============== =============== ============================================ Example: ```nim {.checks: off, optimization: speed.} # compile without runtime checks and optimize for speed ``` push and pop pragmas -------------------- The `push/pop`:idx: pragmas are very similar to the option directive, but are used to override the settings temporarily. Example: ```nim {.push checks: off.} # compile this section without runtime checks as it is # speed critical # ... some code ... {.pop.} # restore old settings ``` `push/pop`:idx: can switch on/off some standard library pragmas, example: ```nim {.push inline.} proc thisIsInlined(): int = 42 func willBeInlined(): float = 42.0 {.pop.} proc notInlined(): int = 9 {.push discardable, boundChecks: off, compileTime, noSideEffect, experimental.} template example(): string = "https://nim-lang.org" {.pop.} {.push deprecated, used, stackTrace: off.} proc sample(): bool = true {.pop.} ``` For third party pragmas, it depends on its implementation but uses the same syntax. register pragma --------------- The `register` pragma is for variables only. It declares the variable as `register`, giving the compiler a hint that the variable should be placed in a hardware register for faster access. C compilers usually ignore this though and for good reasons: Often they do a better job without it anyway. However, in highly specific cases (a dispatch loop of a bytecode interpreter for example) it may provide benefits. global pragma ------------- The `global` pragma can be applied to a variable within a proc to instruct the compiler to store it in a global location and initialize it once at program startup. ```nim proc isHexNumber(s: string): bool = var pattern {.global.} = re"[0-9a-fA-F]+" result = s.match(pattern) ``` When used within a generic proc, a separate unique global variable will be created for each instantiation of the proc. The order of initialization of the created global variables within a module is not defined, but all of them will be initialized after any top-level variables in their originating module and before any variable in a module that imports it. Disabling certain messages -------------------------- Nim generates some warnings and hints that may annoy the user. A mechanism for disabling certain messages is provided: Each hint and warning message is associated with a symbol. This is the message's identifier, which can be used to enable or disable the message by putting it in brackets following the pragma: ```Nim {.hint[XDeclaredButNotUsed]: off.} # Turn off the hint about declared but not used symbols. ``` This is often better than disabling all warnings at once. used pragma ----------- Nim produces a warning for symbols that are not exported and not used either. The `used` pragma can be attached to a symbol to suppress this warning. This is particularly useful when the symbol was generated by a macro: ```nim template implementArithOps(T) = proc echoAdd(a, b: T) {.used.} = echo a + b proc echoSub(a, b: T) {.used.} = echo a - b # no warning produced for the unused 'echoSub' implementArithOps(int) echoAdd 3, 5 ``` `used` can also be used as a top-level statement to mark a module as "used". This prevents the "Unused import" warning: ```nim # module: debughelper.nim when defined(nimHasUsed): # 'import debughelper' is so useful for debugging # that Nim shouldn't produce a warning for that import, # even if currently unused: {.used.} ``` experimental pragma ------------------- The `experimental` pragma enables experimental language features. Depending on the concrete feature, this means that the feature is either considered too unstable for an otherwise stable release or that the future of the feature is uncertain (it may be removed at any time). See the [experimental manual](manual_experimental.html) for more details. Example: ```nim import std/threadpool {.experimental: "parallel".} proc threadedEcho(s: string, i: int) = echo(s, " ", $i) proc useParallel() = parallel: for i in 0..4: spawn threadedEcho("echo in parallel", i) useParallel() ``` As a top-level statement, the experimental pragma enables a feature for the rest of the module it's enabled in. This is problematic for macro and generic instantiations that cross a module scope. Currently, these usages have to be put into a `.push/pop` environment: ```nim # client.nim proc useParallel*[T](unused: T) = # use a generic T here to show the problem. {.push experimental: "parallel".} parallel: for i in 0..4: echo "echo in parallel" {.pop.} ``` ```nim import client useParallel(1) ``` Implementation Specific Pragmas =============================== This section describes additional pragmas that the current Nim implementation supports but which should not be seen as part of the language specification. Bitsize pragma -------------- The `bitsize` pragma is for object field members. It declares the field as a bitfield in C/C++. ```Nim type mybitfield = object flag {.bitsize:1.}: cuint ``` generates: ```C struct mybitfield { unsigned int flag:1; }; ``` size pragma ----------- Nim automatically determines the size of an enum. But when wrapping a C enum type, it needs to be of a specific size. The `size pragma` allows specifying the size of the enum type. ```Nim type EventType* {.size: sizeof(uint32).} = enum QuitEvent, AppTerminating, AppLowMemory doAssert sizeof(EventType) == sizeof(uint32) ``` The `size pragma` can also specify the size of an `importc` incomplete object type so that one can get the size of it at compile time even if it was declared without fields. ```Nim type AtomicFlag* {.importc: "atomic_flag", header: "", size: 1.} = object static: # if AtomicFlag didn't have the size pragma, this code would result in a compile time error. echo sizeof(AtomicFlag) ``` The `size pragma` accepts only the values 1, 2, 4 or 8. Align pragma ------------ The `align`:idx: pragma is for variables and object field members. It modifies the alignment requirement of the entity being declared. The argument must be a constant power of 2. Valid non-zero alignments that are weaker than other align pragmas on the same declaration are ignored. Alignments that are weaker than the alignment requirement of the type are ignored. ```Nim type sseType = object sseData {.align(16).}: array[4, float32] # every object will be aligned to 128-byte boundary Data = object x: char cacheline {.align(128).}: array[128, char] # over-aligned array of char, proc main() = echo "sizeof(Data) = ", sizeof(Data), " (1 byte + 127 bytes padding + 128-byte array)" # output: sizeof(Data) = 256 (1 byte + 127 bytes padding + 128-byte array) echo "alignment of sseType is ", alignof(sseType) # output: alignment of sseType is 16 var d {.align(2048).}: Data # this instance of data is aligned even stricter main() ``` This pragma has no effect on the JS backend. Noalias pragma -------------- Since version 1.4 of the Nim compiler, there is a `.noalias` annotation for variables and parameters. It is mapped directly to C/C++'s `restrict`:c: keyword and means that the underlying pointer is pointing to a unique location in memory, no other aliases to this location exist. It is *unchecked* that this alias restriction is followed. If the restriction is violated, the backend optimizer is free to miscompile the code. This is an **unsafe** language feature. Ideally in later versions of the language, the restriction will be enforced at compile time. (This is also why the name `noalias` was chosen instead of a more verbose name like `unsafeAssumeNoAlias`.) Volatile pragma --------------- The `volatile` pragma is for variables only. It declares the variable as `volatile`:c:, whatever that means in C/C++ (its semantics are not well-defined in C/C++). **Note**: This pragma will not exist for the LLVM backend. nodecl pragma ------------- The `nodecl` pragma can be applied to almost any symbol (variable, proc, type, etc.) and is sometimes useful for interoperability with C: It tells Nim that it should not generate a declaration for the symbol in the C code. For example: ```Nim var EACCES {.importc, nodecl.}: cint # pretend EACCES was a variable, as # Nim does not know its value ``` However, the `header` pragma is often the better alternative. **Note**: This will not work for the LLVM backend. Header pragma ------------- The `header` pragma is very similar to the `nodecl` pragma: It can be applied to almost any symbol and specifies that it should not be declared and instead, the generated code should contain an `#include`:c:\: ```Nim type PFile {.importc: "FILE*", header: "".} = distinct pointer # import C's FILE* type; Nim will treat it as a new pointer type ``` The `header` pragma always expects a string constant. The string constant contains the header file: As usual for C, a system header file is enclosed in angle brackets: `<>`:c:. If no angle brackets are given, Nim encloses the header file in `""`:c: in the generated C code. **Note**: This will not work for the LLVM backend. IncompleteStruct pragma ----------------------- The `incompleteStruct` pragma tells the compiler to not use the underlying C `struct`:c: in a `sizeof` expression: ```Nim type DIR* {.importc: "DIR", header: "", pure, incompleteStruct.} = object ``` Compile pragma -------------- The `compile` pragma can be used to compile and link a C/C++ source file with the project: This pragma can take three forms. The first is a simple file input: ```Nim {.compile: "myfile.cpp".} ``` The second form is a tuple where the second arg is the output name strutils formatter: ```Nim {.compile: ("file.c", "$1.o").} ``` **Note**: Nim computes a SHA1 checksum and only recompiles the file if it has changed. One can use the `-f`:option: command-line option to force the recompilation of the file. Since 1.4 the `compile` pragma is also available with this syntax: ```Nim {.compile("myfile.cpp", "--custom flags here").} ``` As can be seen in the example, this new variant allows for custom flags that are passed to the C compiler when the file is recompiled. Link pragma ----------- The `link` pragma can be used to link an additional file with the project: ```Nim {.link: "myfile.o".} ``` passc pragma ------------ The `passc` pragma can be used to pass additional parameters to the C compiler like one would use the command-line switch `--passc`:option:\: ```Nim {.passc: "-Wall -Werror".} ``` Note that one can use `gorge` from the [system module](system.html) to embed parameters from an external command that will be executed during semantic analysis: ```Nim {.passc: gorge("pkg-config --cflags sdl").} ``` localPassC pragma ----------------- The `localPassC` pragma can be used to pass additional parameters to the C compiler, but only for the C/C++ file that is produced from the Nim module the pragma resides in: ```Nim # Module A.nim # Produces: A.nim.cpp {.localPassC: "-Wall -Werror".} # Passed when compiling A.nim.cpp ``` passl pragma ------------ The `passl` pragma can be used to pass additional parameters to the linker like one would be using the command-line switch `--passl`:option:\: ```Nim {.passl: "-lSDLmain -lSDL".} ``` Note that one can use `gorge` from the [system module](system.html) to embed parameters from an external command that will be executed during semantic analysis: ```Nim {.passl: gorge("pkg-config --libs sdl").} ``` Emit pragma ----------- The `emit` pragma can be used to directly affect the output of the compiler's code generator. The code is then unportable to other code generators/backends. Its usage is highly discouraged! However, it can be extremely useful for interfacing with `C++`:idx: or `Objective C`:idx: code. Example: ```Nim {.emit: """ static int cvariable = 420; """.} {.push stackTrace:off.} proc embedsC() = var nimVar = 89 # access Nim symbols within an emit section outside of string literals: {.emit: ["""fprintf(stdout, "%d\n", cvariable + (int)""", nimVar, ");"].} {.pop.} embedsC() ``` ``nimbase.h`` defines `NIM_EXTERNC`:c: C macro that can be used for `extern "C"`:cpp: code to work with both `nim c`:cmd: and `nim cpp`:cmd:, e.g.: ```Nim proc foobar() {.importc:"$1".} {.emit: """ #include NIM_EXTERNC void fun(){} """.} ``` .. note:: For backward compatibility, if the argument to the `emit` statement is a single string literal, Nim symbols can be referred to via backticks. This usage is however deprecated. For a top-level emit statement, the section where in the generated C/C++ file the code should be emitted can be influenced via the prefixes `/*TYPESECTION*/`:c: or `/*VARSECTION*/`:c: or `/*INCLUDESECTION*/`:c:\: ```Nim {.emit: """/*TYPESECTION*/ struct Vector3 { public: Vector3(): x(5) {} Vector3(float x_): x(x_) {} float x; }; """.} type Vector3 {.importcpp: "Vector3", nodecl} = object x: cfloat proc constructVector3(a: cfloat): Vector3 {.importcpp: "Vector3(@)", nodecl} ``` ImportCpp pragma ---------------- **Note**: [c2nim](https://github.com/nim-lang/c2nim/blob/master/doc/c2nim.rst) can parse a large subset of C++ and knows about the `importcpp` pragma pattern language. It is not necessary to know all the details described here. Similar to the [importc pragma] for C, the `importcpp` pragma can be used to import `C++`:idx: methods or C++ symbols in general. The generated code then uses the C++ method calling syntax: `obj->method(arg)`:cpp:. In combination with the `header` and `emit` pragmas this allows *sloppy* interfacing with libraries written in C++: ```Nim # Horrible example of how to interface with a C++ engine ... ;-) {.link: "/usr/lib/libIrrlicht.so".} {.emit: """ using namespace irr; using namespace core; using namespace scene; using namespace video; using namespace io; using namespace gui; """.} const irr = "" type IrrlichtDeviceObj {.header: irr, importcpp: "IrrlichtDevice".} = object IrrlichtDevice = ptr IrrlichtDeviceObj proc createDevice(): IrrlichtDevice {. header: irr, importcpp: "createDevice(@)".} proc run(device: IrrlichtDevice): bool {. header: irr, importcpp: "#.run(@)".} ``` The compiler needs to be told to generate C++ (command `cpp`:option:) for this to work. The conditional symbol `cpp` is defined when the compiler emits C++ code. ### Namespaces The *sloppy interfacing* example uses `.emit` to produce `using namespace`:cpp: declarations. It is usually much better to instead refer to the imported name via the `namespace::identifier`:cpp: notation: ```nim type IrrlichtDeviceObj {.header: irr, importcpp: "irr::IrrlichtDevice".} = object ``` ### Importcpp for enums When `importcpp` is applied to an enum type the numerical enum values are annotated with the C++ enum type, like in this example: `((TheCppEnum)(3))`:cpp:. (This turned out to be the simplest way to implement it.) ### Importcpp for procs Note that the `importcpp` variant for procs uses a somewhat cryptic pattern language for maximum flexibility: - A hash ``#`` symbol is replaced by the first or next argument. - A dot following the hash ``#.`` indicates that the call should use C++'s dot or arrow notation. - An at symbol ``@`` is replaced by the remaining arguments, separated by commas. For example: ```nim proc cppMethod(this: CppObj, a, b, c: cint) {.importcpp: "#.CppMethod(@)".} var x: ptr CppObj cppMethod(x[], 1, 2, 3) ``` Produces: ```C x->CppMethod(1, 2, 3) ``` As a special rule to keep backward compatibility with older versions of the `importcpp` pragma, if there is no special pattern character (any of ``# ' @``) at all, C++'s dot or arrow notation is assumed, so the above example can also be written as: ```nim proc cppMethod(this: CppObj, a, b, c: cint) {.importcpp: "CppMethod".} ``` Note that the pattern language naturally also covers C++'s operator overloading capabilities: ```nim proc vectorAddition(a, b: Vec3): Vec3 {.importcpp: "# + #".} proc dictLookup(a: Dict, k: Key): Value {.importcpp: "#[#]".} ``` - An apostrophe ``'`` followed by an integer ``i`` in the range 0..9 is replaced by the i'th parameter *type*. The 0th position is the result type. This can be used to pass types to C++ function templates. Between the ``'`` and the digit, an asterisk can be used to get to the base type of the type. (So it "takes away a star" from the type; `T*`:c: becomes `T`.) Two stars can be used to get to the element type of the element type etc. For example: ```nim type Input {.importcpp: "System::Input".} = object proc getSubsystem*[T](): ptr T {.importcpp: "SystemManager::getSubsystem<'*0>()", nodecl.} let x: ptr Input = getSubsystem[Input]() ``` Produces: ```C x = SystemManager::getSubsystem() ``` - ``#@`` is a special case to support a `cnew` operation. It is required so that the call expression is inlined directly, without going through a temporary location. This is only required to circumvent a limitation of the current code generator. For example C++'s `new`:cpp: operator can be "imported" like this: ```nim proc cnew*[T](x: T): ptr T {.importcpp: "(new '*0#@)", nodecl.} # constructor of 'Foo': proc constructFoo(a, b: cint): Foo {.importcpp: "Foo(@)".} let x = cnew constructFoo(3, 4) ``` Produces: ```C x = new Foo(3, 4) ``` However, depending on the use case `new Foo`:cpp: can also be wrapped like this instead: ```nim proc newFoo(a, b: cint): ptr Foo {.importcpp: "new Foo(@)".} let x = newFoo(3, 4) ``` ### Wrapping constructors Sometimes a C++ class has a private copy constructor and so code like `Class c = Class(1,2);`:cpp: must not be generated but instead `Class c(1,2);`:cpp:. For this purpose the Nim proc that wraps a C++ constructor needs to be annotated with the `constructor`:idx: pragma. This pragma also helps to generate faster C++ code since construction then doesn't invoke the copy constructor: ```nim # a better constructor of 'Foo': proc constructFoo(a, b: cint): Foo {.importcpp: "Foo(@)", constructor.} ``` ### Wrapping destructors Since Nim generates C++ directly, any destructor is called implicitly by the C++ compiler at the scope exits. This means that often one can get away with not wrapping the destructor at all! However, when it needs to be invoked explicitly, it needs to be wrapped. The pattern language provides everything that is required: ```nim proc destroyFoo(this: var Foo) {.importcpp: "#.~Foo()".} ``` ### Importcpp for objects Generic `importcpp`'ed objects are mapped to C++ templates. This means that one can import C++'s templates rather easily without the need for a pattern language for object types: ```nim test = "nim cpp $1" type StdMap[K, V] {.importcpp: "std::map", header: "".} = object proc `[]=`[K, V](this: var StdMap[K, V]; key: K; val: V) {. importcpp: "#[#] = #", header: "".} var x: StdMap[cint, cdouble] x[6] = 91.4 ``` Produces: ```C std::map x; x[6] = 91.4; ``` - If more precise control is needed, the apostrophe `'` can be used in the supplied pattern to denote the concrete type parameters of the generic type. See the usage of the apostrophe operator in proc patterns for more details. ```nim type VectorIterator[T] {.importcpp: "std::vector<'0>::iterator".} = object var x: VectorIterator[cint] ``` Produces: ```C std::vector::iterator x; ``` ImportJs pragma --------------- Similar to the [importcpp pragma] for C++, the `importjs` pragma can be used to import Javascript methods or symbols in general. The generated code then uses the Javascript method calling syntax: ``obj.method(arg)``. ImportObjC pragma ----------------- Similar to the [importc pragma] for C, the `importobjc` pragma can be used to import `Objective C`:idx: methods. The generated code then uses the Objective C method calling syntax: ``[obj method param1: arg]``. In addition with the `header` and `emit` pragmas this allows *sloppy* interfacing with libraries written in Objective C: ```Nim # horrible example of how to interface with GNUStep ... {.passl: "-lobjc".} {.emit: """ #include @interface Greeter:Object { } - (void)greet:(long)x y:(long)dummy; @end #include @implementation Greeter - (void)greet:(long)x y:(long)dummy { printf("Hello, World!\n"); } @end #include """.} type Id {.importc: "id", header: "", final.} = distinct int proc newGreeter: Id {.importobjc: "Greeter new", nodecl.} proc greet(self: Id, x, y: int) {.importobjc: "greet", nodecl.} proc free(self: Id) {.importobjc: "free", nodecl.} var g = newGreeter() g.greet(12, 34) g.free() ``` The compiler needs to be told to generate Objective C (command `objc`:option:) for this to work. The conditional symbol ``objc`` is defined when the compiler emits Objective C code. CodegenDecl pragma ------------------ The `codegenDecl` pragma can be used to directly influence Nim's code generator. It receives a format string that determines how the variable, proc or object type is declared in the generated code. For variables, $1 in the format string represents the type of the variable, $2 is the name of the variable, and each appearance of $# represents $1/$2 respectively according to its position. The following Nim code: ```nim var a {.codegenDecl: "$# progmem $#".}: int ``` will generate this C code: ```c int progmem a ``` For procedures, $1 is the return type of the procedure, $2 is the name of the procedure, $3 is the parameter list, and each appearance of $# represents $1/$2/$3 respectively according to its position. The following nim code: ```nim proc myinterrupt() {.codegenDecl: "__interrupt $# $#$#".} = echo "realistic interrupt handler" ``` will generate this code: ```c __interrupt void myinterrupt() ``` For object types, the $1 represents the name of the object type, $2 is the list of fields and $3 is the base type. ```nim const strTemplate = """ struct $1 { $2 }; """ type Foo {.codegenDecl:strTemplate.} = object a, b: int ``` will generate this code: ```c struct Foo { NI a; NI b; }; ``` `cppNonPod` pragma ------------------ The `cppNonPod` pragma should be used for non-POD `importcpp` types so that they work properly (in particular regarding constructor and destructor) for `threadvar` variables. This requires `--tlsEmulation:off`:option:. ```nim type Foo {.cppNonPod, importcpp, header: "funs.h".} = object x: cint proc main()= var a {.threadvar.}: Foo ``` compile-time define pragmas --------------------------- The pragmas listed here can be used to optionally accept values from the `-d/--define`:option: option at compile time. The implementation currently provides the following possible options (various others may be added later). ================= ============================================ pragma description ================= ============================================ `intdefine`:idx: Reads in a build-time define as an integer `strdefine`:idx: Reads in a build-time define as a string `booldefine`:idx: Reads in a build-time define as a bool ================= ============================================ ```nim const FooBar {.intdefine.}: int = 5 echo FooBar ``` ```cmd nim c -d:FooBar=42 foobar.nim ``` In the above example, providing the `-d`:option: flag causes the symbol `FooBar` to be overwritten at compile-time, printing out 42. If the `-d:FooBar=42`:option: were to be omitted, the default value of 5 would be used. To see if a value was provided, `defined(FooBar)` can be used. The syntax `-d:flag`:option: is actually just a shortcut for `-d:flag=true`:option:. These pragmas also accept an optional string argument for qualified define names. ```nim const FooBar {.intdefine: "package.FooBar".}: int = 5 echo FooBar ``` ```cmd nim c -d:package.FooBar=42 foobar.nim ``` This helps disambiguate define names in different packages. See also the [generic `define` pragma](manual_experimental.html#generic-nimdefine-pragma) for a version of these pragmas that detects the type of the define based on the constant value. User-defined pragmas ==================== pragma pragma ------------- The `pragma` pragma can be used to declare user-defined pragmas. This is useful because Nim's templates and macros do not affect pragmas. User-defined pragmas are in a different module-wide scope than all other symbols. They cannot be imported from a module. Example: ```nim when appType == "lib": {.pragma: rtl, exportc, dynlib, cdecl.} else: {.pragma: rtl, importc, dynlib: "client.dll", cdecl.} proc p*(a, b: int): int {.rtl.} = result = a + b ``` In the example, a new pragma named `rtl` is introduced that either imports a symbol from a dynamic library or exports the symbol for dynamic library generation. Custom annotations ------------------ It is possible to define custom typed pragmas. Custom pragmas do not affect code generation directly, but their presence can be detected by macros. Custom pragmas are defined using templates annotated with pragma `pragma`: ```nim template dbTable(name: string, table_space: string = "") {.pragma.} template dbKey(name: string = "", primary_key: bool = false) {.pragma.} template dbForeignKey(t: typedesc) {.pragma.} template dbIgnore {.pragma.} ``` Consider this stylized example of a possible Object Relation Mapping (ORM) implementation: ```nim const tblspace {.strdefine.} = "dev" # switch for dev, test and prod environments type User {.dbTable("users", tblspace).} = object id {.dbKey(primary_key = true).}: int name {.dbKey"full_name".}: string is_cached {.dbIgnore.}: bool age: int UserProfile {.dbTable("profiles", tblspace).} = object id {.dbKey(primary_key = true).}: int user_id {.dbForeignKey: User.}: int read_access: bool write_access: bool admin_access: bool ``` In this example, custom pragmas are used to describe how Nim objects are mapped to the schema of the relational database. Custom pragmas can have zero or more arguments. In order to pass multiple arguments use one of template call syntaxes. All arguments are typed and follow standard overload resolution rules for templates. Therefore, it is possible to have default values for arguments, pass by name, varargs, etc. Custom pragmas can be used in all locations where ordinary pragmas can be specified. It is possible to annotate procs, templates, type and variable definitions, statements, etc. The macros module includes helpers which can be used to simplify custom pragma access `hasCustomPragma`, `getCustomPragmaVal`. Please consult the [macros](macros.html) module documentation for details. These macros are not magic, everything they do can also be achieved by walking the AST of the object representation. More examples with custom pragmas: - Better serialization/deserialization control: ```nim type MyObj = object a {.dontSerialize.}: int b {.defaultDeserialize: 5.}: int c {.serializationKey: "_c".}: string ``` - Adopting type for gui inspector in a game engine: ```nim type MyComponent = object position {.editable, animatable.}: Vector3 alpha {.editRange: [0.0..1.0], animatable.}: float32 ``` Macro pragmas ------------- Macros and templates can sometimes be called with the pragma syntax. Cases where this is possible include when attached to routine (procs, iterators, etc.) declarations or routine type expressions. The compiler will perform the following simple syntactic transformations: ```nim template command(name: string, def: untyped) = discard proc p() {.command("print").} = discard ``` This is translated to: ```nim command("print"): proc p() = discard ``` ------ ```nim type AsyncEventHandler = proc (x: Event) {.async.} ``` This is translated to: ```nim type AsyncEventHandler = async(proc (x: Event)) ``` ------ When multiple macro pragmas are applied to the same definition, the first one from left to right will be evaluated. This macro can then choose to keep the remaining macro pragmas in its output, and those will be evaluated in the same way. There are a few more applications of macro pragmas, such as in type, variable and constant declarations, but this behavior is considered to be experimental and is documented in the [experimental manual]( manual_experimental.html#extended-macro-pragmas) instead. Foreign function interface ========================== Nim's `FFI`:idx: (foreign function interface) is extensive and only the parts that scale to other future backends (like the LLVM/JavaScript backends) are documented here. Importc pragma -------------- The `importc` pragma provides a means to import a proc or a variable from C. The optional argument is a string containing the C identifier. If the argument is missing, the C name is the Nim identifier *exactly as spelled*: ```nim proc printf(formatstr: cstring) {.header: "", importc: "printf", varargs.} ``` When `importc` is applied to a `let` statement it can omit its value which will then be expected to come from C. This can be used to import a C `const`:c:\: ```nim {.emit: "const int cconst = 42;".} let cconst {.importc, nodecl.}: cint assert cconst == 42 ``` Note that this pragma has been abused in the past to also work in the JS backend for JS objects and functions. Other backends do provide the same feature under the same name. Also, when the target language is not set to C, other pragmas are available: * [importcpp][importcpp pragma] * [importobjc][importobjc pragma] * [importjs][importjs pragma] The string literal passed to `importc` can be a format string: ```Nim proc p(s: cstring) {.importc: "prefix$1".} ``` In the example, the external name of `p` is set to `prefixp`. Only ``$1`` is available and a literal dollar sign must be written as ``$$``. Exportc pragma -------------- The `exportc` pragma provides a means to export a type, a variable, or a procedure to C. Enums and constants can't be exported. The optional argument is a string containing the C identifier. If the argument is missing, the C name is the Nim identifier *exactly as spelled*: ```Nim proc callme(formatstr: cstring) {.exportc: "callMe", varargs.} ``` Note that this pragma is somewhat of a misnomer: Other backends do provide the same feature under the same name. The string literal passed to `exportc` can be a format string: ```Nim proc p(s: string) {.exportc: "prefix$1".} = echo s ``` In the example, the external name of `p` is set to `prefixp`. Only ``$1`` is available and a literal dollar sign must be written as ``$$``. If the symbol should also be exported to a dynamic library, the `dynlib` pragma should be used in addition to the `exportc` pragma. See [Dynlib pragma for export]. Extern pragma ------------- Like `exportc` or `importc`, the `extern` pragma affects name mangling. The string literal passed to `extern` can be a format string: ```Nim proc p(s: string) {.extern: "prefix$1".} = echo s ``` In the example, the external name of `p` is set to `prefixp`. Only ``$1`` is available and a literal dollar sign must be written as ``$$``. Bycopy pragma ------------- The `bycopy` pragma can be applied to an object or tuple type or a proc param. It instructs the compiler to pass the type by value to procs: ```nim type Vector {.bycopy.} = object x, y, z: float ``` The Nim compiler automatically determines whether a parameter is passed by value or by reference based on the parameter type's size. If a parameter must be passed by value or by reference, (such as when interfacing with a C library) use the bycopy or byref pragmas. Notice params marked as `byref` takes precedence over types marked as `bycopy`. Byref pragma ------------ The `byref` pragma can be applied to an object or tuple type or a proc param. When applied to a type it instructs the compiler to pass the type by reference (hidden pointer) to procs. When applied to a param it will take precedence, even if the the type was marked as `bycopy`. When an `importc` type has a `byref` pragma or parameters are marked as `byref` in an `importc` proc, these params translate to pointers. When an `importcpp` type has a `byref` pragma, these params translate to C++ references `&`. ```Nim {.emit: """/*TYPESECTION*/ typedef struct { int x; } CStruct; """.} {.emit: """ #ifdef __cplusplus extern "C" #endif int takesCStruct(CStruct* x) { return x->x; } """.} type CStruct {.importc, byref.} = object x: cint proc takesCStruct(x: CStruct): cint {.importc.} ``` or ```Nim type CStruct {.importc.} = object x: cint proc takesCStruct(x {.byref.}: CStruct): cint {.importc.} ``` ```Nim {.emit: """/*TYPESECTION*/ struct CppStruct { int x; int takesCppStruct(CppStruct& y) { return x + y.x; } }; """.} type CppStruct {.importcpp, byref.} = object x: cint proc takesCppStruct(x, y: CppStruct): cint {.importcpp.} ``` Varargs pragma -------------- The `varargs` pragma can be applied to procedures only (and procedure types). It tells Nim that the proc can take a variable number of parameters after the last specified parameter. Nim string values will be converted to C strings automatically: ```Nim proc printf(formatstr: cstring) {.header: "", varargs.} printf("hallo %s", "world") # "world" will be passed as C string ``` Union pragma ------------ The `union` pragma can be applied to any `object` type. It means all of an object's fields are overlaid in memory. This produces a `union`:c: instead of a `struct`:c: in the generated C/C++ code. The object declaration then must not use inheritance or any GC'ed memory but this is currently not checked. **Future directions**: GC'ed memory should be allowed in unions and the GC should scan unions conservatively. Packed pragma ------------- The `packed` pragma can be applied to any `object` type. It ensures that the fields of an object are packed back-to-back in memory. It is useful to store packets or messages from/to network or hardware drivers, and for interoperability with C. Combining packed pragma with inheritance is not defined, and it should not be used with GC'ed memory (ref's). **Future directions**: Using GC'ed memory in packed pragma will result in a static error. Usage with inheritance should be defined and documented. Dynlib pragma for import ------------------------ With the `dynlib` pragma, a procedure or a variable can be imported from a dynamic library (``.dll`` files for Windows, ``lib*.so`` files for UNIX). The non-optional argument has to be the name of the dynamic library: ```Nim proc gtk_image_new(): PGtkWidget {.cdecl, dynlib: "libgtk-x11-2.0.so", importc.} ``` In general, importing a dynamic library does not require any special linker options or linking with import libraries. This also implies that no *devel* packages need to be installed. The `dynlib` import mechanism supports a versioning scheme: ```nim proc Tcl_Eval(interp: pTcl_Interp, script: cstring): int {.cdecl, importc, dynlib: "libtcl(|8.5|8.4|8.3).so.(1|0)".} ``` At runtime, the dynamic library is searched for (in this order): libtcl.so.1 libtcl.so.0 libtcl8.5.so.1 libtcl8.5.so.0 libtcl8.4.so.1 libtcl8.4.so.0 libtcl8.3.so.1 libtcl8.3.so.0 The `dynlib` pragma supports not only constant strings as an argument but also string expressions in general: ```nim import std/os proc getDllName: string = result = "mylib.dll" if fileExists(result): return result = "mylib2.dll" if fileExists(result): return quit("could not load dynamic library") proc myImport(s: cstring) {.cdecl, importc, dynlib: getDllName().} ``` **Note**: Patterns like ``libtcl(|8.5|8.4).so`` are only supported in constant strings, because they are precompiled. **Note**: Passing variables to the `dynlib` pragma will fail at runtime because of order of initialization problems. **Note**: A `dynlib` import can be overridden with the `--dynlibOverride:name`:option: command-line option. The [Compiler User Guide](nimc.html) contains further information. Dynlib pragma for export ------------------------ With the `dynlib` pragma, a procedure can also be exported to a dynamic library. The pragma then has no argument and has to be used in conjunction with the `exportc` pragma: ```Nim proc exportme(): int {.cdecl, exportc, dynlib.} ``` This is only useful if the program is compiled as a dynamic library via the `--app:lib`:option: command-line option. Threads ======= The `--threads:on`:option: command-line switch is enabled by default. The [typedthreads module](typedthreads.html) module then contains several threading primitives. See [spawn](manual_experimental.html#parallel-amp-spawn) for further details. The only ways to create a thread is via `spawn` or `createThread`. Thread pragma ------------- A proc that is executed as a new thread of execution should be marked by the `thread` pragma for reasons of readability. The compiler checks for violations of the `no heap sharing restriction`:idx:\: This restriction implies that it is invalid to construct a data structure that consists of memory allocated from different (thread-local) heaps. A thread proc can be passed to `createThread` or `spawn`. Threadvar pragma ---------------- A variable can be marked with the `threadvar` pragma, which makes it a `thread-local`:idx: variable; Additionally, this implies all the effects of the `global` pragma. ```nim var checkpoints* {.threadvar.}: seq[string] ``` Due to implementation restrictions, thread-local variables cannot be initialized within the `var` section. (Every thread-local variable needs to be replicated at thread creation.) Threads and exceptions ---------------------- The interaction between threads and exceptions is simple: A *handled* exception in one thread cannot affect any other thread. However, an *unhandled* exception in one thread terminates the whole *process*. Guards and locks ================ Nim provides common low level concurrency mechanisms like locks, atomic intrinsics or condition variables. Nim significantly improves on the safety of these features via additional pragmas: 1) A `guard`:idx: annotation is introduced to prevent data races. 2) Every access of a guarded memory location needs to happen in an appropriate `locks`:idx: statement. Guards and locks sections ------------------------- ### Protecting global variables Object fields and global variables can be annotated via a `guard` pragma: ```nim import std/locks var glock: Lock var gdata {.guard: glock.}: int ``` The compiler then ensures that every access of `gdata` is within a `locks` section: ```nim proc invalid = # invalid: unguarded access: echo gdata proc valid = # valid access: {.locks: [glock].}: echo gdata ``` Top level accesses to `gdata` are always allowed so that it can be initialized conveniently. It is *assumed* (but not enforced) that every top level statement is executed before any concurrent action happens. The `locks` section deliberately looks ugly because it has no runtime semantics and should not be used directly! It should only be used in templates that also implement some form of locking at runtime: ```nim template lock(a: Lock; body: untyped) = pthread_mutex_lock(a) {.locks: [a].}: try: body finally: pthread_mutex_unlock(a) ``` The guard does not need to be of any particular type. It is flexible enough to model low level lockfree mechanisms: ```nim var dummyLock {.compileTime.}: int var atomicCounter {.guard: dummyLock.}: int template atomicRead(x): untyped = {.locks: [dummyLock].}: memoryReadBarrier() x echo atomicRead(atomicCounter) ``` The `locks` pragma takes a list of lock expressions `locks: [a, b, ...]` in order to support *multi lock* statements. ### Protecting general locations The `guard` annotation can also be used to protect fields within an object. The guard then needs to be another field within the same object or a global variable. Since objects can reside on the heap or on the stack, this greatly enhances the expressiveness of the language: ```nim import std/locks type ProtectedCounter = object v {.guard: L.}: int L: Lock proc incCounters(counters: var openArray[ProtectedCounter]) = for i in 0..counters.high: lock counters[i].L: inc counters[i].v ``` The access to field `x.v` is allowed since its guard `x.L` is active. After template expansion, this amounts to: ```nim proc incCounters(counters: var openArray[ProtectedCounter]) = for i in 0..counters.high: pthread_mutex_lock(counters[i].L) {.locks: [counters[i].L].}: try: inc counters[i].v finally: pthread_mutex_unlock(counters[i].L) ``` There is an analysis that checks that `counters[i].L` is the lock that corresponds to the protected location `counters[i].v`. This analysis is called `path analysis`:idx: because it deals with paths to locations like `obj.field[i].fieldB[j]`. The path analysis is **currently unsound**, but that doesn't make it useless. Two paths are considered equivalent if they are syntactically the same. This means the following compiles (for now) even though it really should not: ```nim {.locks: [a[i].L].}: inc i access a[i].v ```