#!/bin/sh -eu
# Simple script to quickly set up a DSCIP install.

# Get directory where script is running from. As we'll need to come back here
# when the setup script is done.
CWD="$(dirname "$0")"

PROJECT_NAME=""
PROJECT_LOCATION=""
PROJECT_URL=""
PROJECT_BRANCH="master"
TEMPLATE_DIR=""

show_license() {
	echo 'Copyright 2022 Charadon

Licensed under the Apache License, Version 2.0 (the "License"); 
you may not use this file except in compliance with the License. 
You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software 
distributed under the License is distributed on an "AS IS" BASIS, 
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 
See the License for the specific language governing permissions and 
limitations under the License.'
}

help_screen() {
	echo "USAGE: $0: -n [name] -d [/path/to/install/at] -u [https://example.com/example.git] -b [branch_name] -t [/path/to/templates] (-h|-l)"
	echo "========================================================================"
	echo "-n | Name of Project. (Required)"
	echo "-d | Path where you want dscip to install. (Required)"
	echo "-u | URL to Git Repo. (Required)"
	echo "-b | Branch to build. (Default: master)"
	echo "-t | Path to Templates. (Optional)"
	echo "-h | Shows this screen."
	echo "-l | Shows license."
	echo "If no argument is supplied. Program goes into interactive mode."
	return 0
}

check_config() {
	ERROR_MSG="not set. Aborting. See -h for help."
	if [ "$PROJECT_NAME" = "" ];
	then
		echo "-n $ERROR_MSG" && exit 1
	elif [ "$PROJECT_LOCATION" = "" ];
	then
		echo "-d $ERROR_MSG" && exit 1
	elif [ "$PROJECT_URL" = "" ];
	then
		echo "-u $ERROR_MSG" && exit 1
	fi
	return 0
}

install_dscip() {
	echo "Installing dscip..."
	set -x
	mkdir -p "$PROJECT_LOCATION"
	if [ -d "/usr/share/charadon/dscip" ]; # See if dscip is packaged/installed on system.
	then
		ln -s /usr/share/charadon/dscip/* "$PROJECT_LOCATION" || cp /usr/share/charadon/dscip/* "$PROJECT_LOCATION"
		install -m755 /usr/share/charadon/dscip/config.sh "$PROJECT_LOCATION"
	elif [ -d /usr/local/share/charadon/dscip ];
	then
		ln -s /usr/local/share/charadon/dscip/* "$PROJECT_LOCATION" || cp /usr/local/share/charadon/dscip/* "$PROJECT_LOCATION"
		install -m755 /usr/share/charadon/dscip/config.sh "$PROJECT_LOCATION"
	else # If not, clone it from upstream.
		git clone "https://opencode.net/charadon/dscip" "$PROJECT_LOCATION"
	fi
	cd "$PROJECT_LOCATION"
	# Modifying config.sh with variables obtained from setup.sh
	sed -i "s}DSCIP_GITREPO=.*}DSCIP_GITREPO=\"$PROJECT_URL\"}g" config.sh
	sed -i "s/DSCIP_NAME=.*/DSCIP_NAME=\"$PROJECT_NAME\"/g" config.sh
	sed -i "s/DSCIP_BRANCH=.*/DSCIP_BRANCH=\"$PROJECT_BRANCH\"/g" config.sh
	# Copy templates.
	if [ ! "$TEMPLATE_DIR" = "" ];
	then
		cp "$TEMPLATE_DIR"/* .
	fi
	# Done. Go back to CWD, and tell user how to activate DSCIP.
	set +x
	printf "\n"
	printf "\e[32mAll done. Be sure to add:\e[0m\n" 
	echo "* * * * * $(dirname "$(readlink -f "$PROJECT_LOCATION")")/dscip"
	printf "\e[32mTo your crontab! Usually by using \`crontab -e\`\e[0m\n\n"
	printf "\e[32mAlternatively, you can run dscip as a daemon by modifying DSCIP_DAEMON in config.sh\n"
	printf "and creating a daemon for your system's init system.\e[0m\n\n"
	cd "$CWD"
}


# Non-interactive Mode
set +u
if [ ! "$1" = "" ];
then
	set -u
	while getopts ':n:d:u:b:t:lh' options;
	do
		case "${options}" in
			n) # Name
				PROJECT_NAME="$OPTARG"
				;;
			d) # Directory to install to.
				PROJECT_LOCATION="$OPTARG"
				;;
			u) # Git Repo URL
				PROJECT_URL="$OPTARG"
				;;
			b) # Git Branch (Optional)
				PROJECT_BRANCH="$OPTARG"
				;;
			t) # Template Directory (Optional)
				TEMPLATE_DIR="$OPTARG"
				;;
			h) # Show Help Screen
				help_screen
				exit 0
				;;
			l) # Show License
				show_license
				exit 0
				;;
			*)
				;;
		esac
	done
	check_config
	install_dscip
	exit 0
fi
set -u

# Interactive Mode
echo "Welcome to DSCIP setup. This script will ask you a few questions."
echo "Notes:"
echo "    1. This script should be running as the user that will be building the software."
echo "    2. Must have a cron daemon with the command: crontab -e, available."
echo "By default, the script runs in interactive mode. But you can use command-line switches"
echo "to use the set up script non-interactively. Use -h for more info."
printf "\n"
echo "If you feel you are ready. Press enter, otherwise press Ctrl-C to cancel."
read -r


ALL_CORRECT="false"

question_name() {
	PROJECT_NAME=""
	while [ "$PROJECT_NAME" = "" ];
	do
		printf "What is the name of the project?: "
		read -r PROJECT_NAME
	done
}

question_location() {
	PROJECT_LOCATION="/home/$USER/$PROJECT_NAME"
	NEW_PROJECT_LOCATION=""
	printf 'Where do you want to install DSCIP? (Default: %s): ' "$PROJECT_LOCATION"
	read -r NEW_PROJECT_LOCATION
	if [ "$NEW_PROJECT_LOCATION" = "" ];
	then
		return 0
	else
		PROJECT_LOCATION="$NEW_PROJECT_LOCATION"
	fi
}

question_giturl() {
	PROJECT_URL=""
	while [ "$PROJECT_URL" = "" ];
	do
		printf "What is the URL of your Git Repo?: "
		read -r PROJECT_URL
	done
}

question_gitbranch() {
	PROJECT_BRANCH="master"
	printf 'What branch from the Git Repo do you want to use? (Default: %s): ' "$PROJECT_BRANCH"
	read -r PROJECT_BRANCH
}

question_templates() {
	TEMPLATE_DIR=""
	printf "If you have a template directory of the pre,post,build,failed.sh scripts.\nEnter it's location here, otherwise press Enter: "
	read -r TEMPLATE_DIR
}

question_allcorrect() {
	echo "Is all this information correct? Press the number to edit specific variables:"
	echo "1. Project Name: $PROJECT_NAME"
	echo "2. DSCIP Location: $PROJECT_LOCATION"
	echo "3. Git URL: $PROJECT_URL"
	echo "4. Git Branch: $PROJECT_BRANCH"
	echo "5. Template Directory: $TEMPLATE_DIR"
	printf "\nIf all information is correct. Press Enter.\nOtherwise, use a number and then press enter to edit: "
}

question_name
printf "\n"
question_location
printf "\n"
question_giturl
printf "\n"
question_gitbranch
printf "\n"
question_templates
printf "\n"

CHOICE=""

while [ "$ALL_CORRECT" = "false" ];
do
	question_allcorrect
	read -r CHOICE
	printf "\n"
	case "$CHOICE" in
		1)
			question_name
			;;
		2)
			question_location
			;;
		3)
			question_giturl
			;;
		4)
			question_gitbranch
			;;
		5)
			question_templates
			;;
		*)
			ALL_CORRECT="true"
			;;
	esac
	printf "\n"
done
check_config
install_dscip