//: Running SubX programs on the VM.
//: (Not to be confused with the 'run' subcommand for running ELF binaries on
//: the VM. That comes later.)
:(before "End Help Texts")
put(Help, "syntax",
"SubX programs consist of segments, each segment in turn consisting of lines.\n"
"Line-endings are significant; each line should contain a single\n"
"instruction, macro or directive.\n"
"\n"
"Comments start with the '#' character. It should be at the start of a word\n"
"(start of line, or following a space).\n"
"\n"
"Each segment starts with a header line: a '==' delimiter followed by the\n"
"starting address for the segment.\n"
"\n"
"The starting address for a segment has some finicky requirements. But just\n"
"start with a round number, and `subx` will try to guide you to a valid\n"
"configuration.\n"
"A good rule of thumb is to try to start the first segment at the default\n"
"address of 0x08048000, and to start each subsequent segment at least 0x1000\n"
"(most common page size) bytes after the last.\n"
"If a segment occupies than 0x1000 bytes you'll need to push subsequent\n"
"segments further down.\n"
"Currently only the first segment contains executable code (because it gets\n"
"annoying to have to change addresses in later segments every time an earlier\n"
"one changes length; one of those finicky requirements).\n"
"\n"
"Lines consist of a series of words. Words can contain arbitrary metadata\n"
"after a '/', but they can never contain whitespace. Metadata has no effect\n"
"at runtime, but can be handy when rewriting macros.\n"
"\n"
"Check out some examples in this directory (ex*.subx)\n"
"Programming in machine code can be annoying, but let's see if we can make\n"
"it nice enough to be able to write a compiler in it.\n"
);
:(before "End Help Contents")
cerr << " syntax\n";
:(scenario add_imm32_to_eax)
# At the lowest level, SubX programs are a series of hex bytes, each
# (variable-length) instruction on one line.
#
# Later we'll make things nicer using macros. But you'll always be able to
# insert hex bytes out of instructions.
#
# As you can see, comments start with '#' and are ignored.
# Segment headers start with '==', specifying the hex address where they
# begin. The first segment is always assumed to be code.
== 0x1
# We don't show it here, but all lines can have metadata after a ':'.
# All words can have metadata after a '/'. No spaces allowed in word metadata, of course.
# Metadata doesn't directly form instructions, but some macros may look at it.
# Unrecognized metadata never causes errors, so you can also use it for
# documentation.
# Within the code segment, x86 instructions consist of the following parts (see cheatsheet.pdf):
# opcode ModR/M SIB displacement immediate
# instruction mod, reg, Reg/Mem bits scale, index, base
# 1-3 bytes 0/1 byte 0/1 byte 0/1/2/4 bytes 0/1/2/4 bytes
05 0a 0b 0c 0d # add 0x0d0c0b0a to EAX
# This program, when run, causes the following events in the trace:
+load: 0x00000001 -> 05
+load: 0x00000002 -> 0a
+load: 0x00000003 -> 0b
+load: 0x00000004 -> 0c
+load: 0x00000005 -> 0d
+run: add imm32 0x0d0c0b0a to reg EAX
+run: storing 0x0d0c0b0a
:(code)
// top-level helper for scenarios: parse the input, transform any macros, load
// the final hex bytes into memory, run it
void run(const string& text_bytes) {
program p;
istringstream in(text_bytes);
parse(in, p);
if (trace_contains_errors()) return; // if any stage raises errors, stop immediately
transform(p);
if (trace_contains_errors()) return;
load(p);
if (trace_contains_errors()) return;
while (EIP < End_of_program)
run_one_instruction();
}
//:: core data structures
:(before "End Types")
struct program {
vector<segment> segments;
// random ideas for other things we may eventually need
//map<name, address> globals;
//vector<recipe> recipes;
//map<string, type_info> types;
};
:(before "struct program")
struct segment {
uint32_t start;
vector<line> lines;
segment() :start(0) {}
};
:(before "struct segment")
struct line {
vector<word> words;
vector<string> metadata;
};
:(before "struct line")
struct word {
string original;
string data;
vector<string> metadata;
};
//:: parse
:(code)
void parse(istream& fin, program& out) {
vector<line> l;
trace(99, "parse") << "begin" << end();
while (has_data(fin)) {
string line_data;
getline(fin, line_data);
trace(99, "parse") << "line: " << line_data << end();
istringstream lin(line_data);
vector<word> w;
while (has_data(lin)) {
string word_data;
lin >> word_data;
if (word_data.empty()) continue;
if (word_data == "==") {
if (!l.empty()) {
assert(!out.segments.empty());
trace(99, "parse") << "flushing to segment" << end();
out.segments.back().lines.swap(l);
}
segment s;
lin >> std::hex >> s.start;
trace(99, "parse") << "new segment from " << HEXWORD << s.start << end();
out.segments.push_back(s);
// todo?
break; // skip rest of line
}
if (word_data[0] == ':') {
// todo: line metadata
break;
}
if (word_data[0] == '#') {
// comment
break;
}
w.push_back(word());
w.back().original = word_data;
istringstream win(word_data);
if (getline(win, w.back().data, '/')) {
string m;
while (getline(win, m, '/'))
w.back().metadata.push_back(m);
}
trace(99, "parse") << "new word: " << w.back().data << end();
}
if (!w.empty()) {
l.push_back(line());
l.back().words.swap(w);
}
}
if (!l.empty()) {
assert(!out.segments.empty());
trace(99, "parse") << "flushing to segment" << end();
out.segments.back().lines.swap(l);
}
trace(99, "parse") << "done" << end();
}
//:: transform
:(before "End Types")
typedef void (*transform_fn)(program&);
:(before "End Globals")
vector<transform_fn> Transform;
void transform(program& p) {
trace(99, "transform") << "begin" << end();
for (int t = 0; t < SIZE(Transform); ++t)
(*Transform.at(t))(p);
trace(99, "transform") << "done" << end();
}
//:: load
void load(const program& p) {
trace(99, "load") << "begin" << end();
if (p.segments.empty()) {
raise << "no code to run\n" << end();
return;
}
for (int i = 0; i < SIZE(p.segments); ++i) {
const segment& seg = p.segments.at(i);
uint32_t addr = seg.start;
trace(99, "load") << "loading segment " << i << " from " << HEXWORD << addr << end();
for (int j = 0; j < SIZE(seg.lines); ++j) {
const line& l = seg.lines.at(j);
for (int k = 0; k < SIZE(l.words); ++k) {
const word& w = l.words.at(k);
uint8_t val = hex_byte(w.data);
if (trace_contains_errors()) return;
write_mem_u8(addr, val);
trace(99, "load") << "0x" << HEXWORD << addr << " -> " << HEXBYTE << NUM(read_mem_u8(addr)) << end();
++addr;
}
}
if (i == 0) End_of_program = addr;
}
EIP = p.segments.at(0).start;
trace(99, "load") << "done" << end();
}
uint8_t hex_byte(const string& s) {
istringstream in(s);
int result = 0;
in >> std::hex >> result;
if (!in) {
raise << "invalid hex " << s << '\n' << end();
return '\0';
}
if (result > 0xff) {
raise << "invalid hex byte " << std::hex << result << '\n' << end();
return '\0';
}
return static_cast<uint8_t>(result);
}
//:: run
:(before "End Initialize Op Names(name)")
put(name, "05", "add imm32 to R0 (EAX)");
//: our first opcode
:(before "End Single-Byte Opcodes")
case 0x05: { // add imm32 to EAX
int32_t arg2 = imm32();
trace(90, "run") << "add imm32 0x" << HEXWORD << arg2 << " to reg EAX" << end();
BINARY_ARITHMETIC_OP(+, Reg[EAX].i, arg2);
break;
}
:(code)
// read a 32-bit immediate in little-endian order from the instruction stream
int32_t imm32() {
int32_t result = next();
result |= (next()<<8);
result |= (next()<<16);
result |= (next()<<24);
return result;
}