path: root/subx/055trace.subx

# primitives for emitting traces to a trace stream, and for tests to check the trace stream
#
# A trace stream looks like this:
#   read : int  # index that we've read until
#   write : int  # index at which writes go
#   data : (array byte)  # prefixed by length as usual
# In a real trace the data will be in a special segment set aside for the purpose.
#
# primitives for operating on traces:
#   - initialize-trace-stream (update global variable)
#   - trace: stream, string
#   - die: stream (exit(1) if using real trace)
#   - check-trace-contains: stream, string/line, string/message (scans only from stream's read pointer, prints message to stderr on failure, updates stream's read pointer)
#   - rewind-reads: stream (resets read pointer)
#   - scan-to-next-line: stream (advance read pointer past next newline)
#
# Traces are very fundamental, so many of the helpers we create here won't be
# used elsewhere; we'll switch to more bounds-checked variants. But here we get
# bounds-checking for free; we allocate a completely disjoint segment for trace
# data, and overflowing it will generate a page fault.

== data

# We'll save the address of the trace segment here.
Trace-stream:
  00 00 00 00

# Fake trace-stream for tests.
# Also illustrates the layout of the real trace-stream (segment).
_test-trace-stream:
  # current write index
  00 00 00 00
  # current read index
  00 00 00 00
  # length (= 8)
  08 00 00 00
  # data
  00 00 00 00 00 00 00 00  # 8 bytes

== code
# instruction                     effective address                                                   operand     displacement    immediate
# op          subop               mod             rm32          base        index         scale       r32
# 1-3 bytes   3 bits              2 bits          3 bits        3 bits      3 bits        2 bits      2 bits      0/1/2/4 bytes   0/1/2/4 bytes

# main:
  e8/call  run-tests/disp32  # 'run-tests' is a function created automatically by SubX. It calls all functions that start with 'test-'.
  # syscall(exit, Num-test-failures)
  8b/copy                         0/mod/indirect  5/rm32/.disp32            .             .           3/r32/EBX   Num-test-failures/disp32          # copy *Num-test-failures to EBX
  b8/copy-to-EAX  1/imm32
  cd/syscall  0x80/imm8

# Allocate a new segment for the trace stream, initialize its length, and save its address to Trace-stream.
# The Trace-stream segment will consist of variable-length lines separated by newlines (0x0a)
initialize-trace-stream:
  # EAX = new-segment(0x1000)
    # push args
  68/push  0x1000/imm32/N
    # call
  e8/call  new-segment/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
  # copy EAX to *Trace-stream
  89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/EAX   Trace-stream/disp32               # copy EAX to *Trace-stream
  # Trace-stream.length = 0x1000/N - 12
  c7          0/copy              1/mod/*+disp8   0/rm32/EAX    .           .             .           .           8/disp8         0xff4/imm32       # copy 0xff4 to *(EAX+8)
  c3/return

# Append a string to the given trace stream.
# Silently give up if it's already full. Or truncate the string if there isn't enough room.
trace:  # t : (address trace-stream), line : string
  # prolog
  55/push-EBP
  89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
  # save registers
  50/push-EAX
  51/push-ECX
  52/push-EDX
  53/push-EBX
  56/push-ESI
  57/push-EDI
  # EDI = t
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none              7/r32/EDI   8/disp8         .                 # copy *(EBP+8) to EDI
  # ESI = line
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none              6/r32/ESI   0xc/disp8       .                 # copy *(EBP+12) to ESI
  # ECX = t->write
  8b/copy                         0/mod/indirect  7/rm32/EDI    .           .             .           1/r32/ECX   .               .                 # copy *EDI to ECX
  # EDX = t->length
  8b/copy                         1/mod/*+disp8   7/rm32/EDI    .           .             .           2/r32/EDX   8/disp8         .                 # copy *(EDI+8) to EDX
  # EAX = _append-3(&t->data[t->write], &t->data[t->length], line)
    # push line
  56/push-ESI
    # push &t->data[t->length]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/EDI  2/index/EDX   .           3/r32/EBX   0xc/disp8       .                 # copy EDI+EDX+12 to EBX
  53/push-EBX
    # push &t->data[t->write]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/EDI  1/index/ECX   .           3/r32/EBX   0xc/disp8       .                 # copy EDI+ECX+12 to EBX
  53/push-EBX
    # call
  e8/call  _append-3/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
  # if EAX == 0 return
  81          7/subop/compare     3/mod/direct    0/rm32/EAX    .           .             .           .           .               0/imm32           # compare EDX
  74/jump-if-equal  $trace:end/disp8
  # t->write += EAX
  01/add                          0/mod/indirect  7/rm32/EDI    .           .             .           0/r32/EAX   .               .                 # add EAX to *EDI
  # refresh ECX = t->write
  8b/copy                         0/mod/indirect  7/rm32/EDI    .           .             .           1/r32/ECX   .               .                 # copy *EDI to ECX
  # EAX = _append-3(&t->data[t->write], &t->data[t->length], line)
    # push line
  68/push  Newline/imm32
    # push &t->data[t->length]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/EDI  2/index/EDX   .           3/r32/EBX   0xc/disp8       .                 # copy EDI+EDX+12 to EBX
  53/push-EBX
    # push &t->data[t->write]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/EDI  1/index/ECX   .           3/r32/EBX   0xc/disp8       .                 # copy EDI+ECX+12 to EBX
  53/push-EBX
    # call
  e8/call  _append-3/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
  # t->write += EAX
  01/add                          0/mod/indirect  7/rm32/EDI    .           .             .           0/r32/EAX   .               .                 # add EAX to *EDI
$trace:end:
  # restore registers
  5f/pop-to-EDI
  5e/pop-to-ESI
  5b/pop-to-EBX
  5a/pop-to-EDX
  59/pop-to-ECX
  58/pop-to-EAX
  # epilog
  89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
  5d/pop-to-EBP
  c3/return

clear-trace-stream:  # t : (address trace-stream)
  # prolog
  55/push-EBP
  89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
  # save registers
  50/push-EAX
  51/push-ECX
  # EAX = t
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none              0/r32/EAX   8/disp8         .                 # copy *(EBP+8) to EAX
  # ECX = t->length
  8b/copy                         1/mod/*+disp8   0/rm32/EAX    .           .             .           1/r32/ECX   8/disp8         .                 # copy *(EAX+8) to ECX
  # ECX = &t->data[t->length]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    0/base/EAX  1/index/ECX   .           1/r32/ECX   0xc/disp8       .                 # copy EAX+ECX+12 to ECX
  # t->write = 0
  c7/copy                         0/mod/direct    0/rm32/EAX    .           .             .           .           .               0/imm32           # copy to *EAX
  # t->read = 0
  c7/copy                         1/mod/*+disp8   0/rm32/EAX    .           .             .           .           4/disp8         0/imm32           # copy to *(EAX+4)
  # EAX = t->data
  81          0/subop/add         3/mod/direct    0/rm32/EAX    .           .             .           .           .               0xc/imm32         # add to EAX
  # while (true)
$clear-trace-stream:loop:
  # if EAX >= ECX break
  39/compare                      3/mod/direct    0/rm32/EAX    .           .             .           1/r32/ECX   .               .                 # compare EAX with ECX
  7d/jump-if-greater-or-equal  $clear-trace-stream:end/disp8
  # *EAX = 0
  c7/copy                         0/mod/direct    0/rm32/EAX    .           .             .           .           .               0/imm32           # copy to *EAX
  # EAX += 4
  81          0/subop/add         3/mod/direct    0/rm32/EAX    .           .             .           .           .               4/imm32           # add to EAX
  eb/jump  $clear-trace-stream:loop/disp8
$clear-trace-stream:end:
  # restore registers
  59/pop-to-ECX
  58/pop-to-EAX
  # epilog
  89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
  5d/pop-to-EBP
  c3/return

## tests

test-trace-single:
  # clear-trace-stream(_test-trace-stream)
    # push args
  68/push  _test-trace-stream/imm32
    # call
  e8/call  clear-trace-stream/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
  # trace(_test-trace-stream, "Ab")
    # push args
  68/push  "Ab"/imm32
  68/push  _test-trace-stream/imm32
    # call
  e8/call  trace/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
  # check-ints-equal(*_test-trace-stream.data, 41/A 62/b 0a/newline 00, msg)
    # push args
  68/push  "F - test-trace-single"/imm32
  68/push  0x0a6241/imm32/Ab-newline
    # push *_test-trace-stream.data
  b8/copy-to-EAX  _test-trace-stream/imm32
  ff          6/subop/push        1/mod/*+disp8   0/rm32/EAX    .           .             .           .           0xc/disp8       .                 # push *(EAX+12)
    # call
  e8/call  check-ints-equal/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
  # end
  c3/return

test-trace-appends:
  # clear-trace-stream(_test-trace-stream)
    # push args
  68/push  _test-trace-stream/imm32
    # call
  e8/call  clear-trace-stream/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
  # trace(_test-trace-stream, "C")
    # push args
  68/push  "C"/imm32
  68/push  _test-trace-stream/imm32
    # call
  e8/call  trace/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
  # trace(_test-trace-stream, "D")
    # push args
  68/push  "D"/imm32
  68/push  _test-trace-stream/imm32
    # call
  e8/call  trace/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
  # check-ints-equal(*_test-trace-stream.data, 43/C 0a/newline 44/D 0a/newline, msg)
    # push args
  68/push  "F - test-trace-appends"/imm32
  68/push  0x0a440a43/imm32/C-newline-D-newline
    # push *_test-trace-stream.data
  b8/copy-to-EAX  _test-trace-stream/imm32
  ff          6/subop/push        1/mod/*+disp8   0/rm32/EAX    .           .             .           .           0xc/disp8       .                 # push *(EAX+12)
    # call
  e8/call  check-ints-equal/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
  # end
  c3/return

test-trace-empty-line:
  # clear-trace-stream(_test-trace-stream)
    # push args
  68/push  _test-trace-stream/imm32
    # call
  e8/call  clear-trace-stream/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
  # trace(_test-trace-stream, "")
    # push args
  68/push  ""/imm32
  68/push  _test-trace-stream/imm32
    # call
  e8/call  trace/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
  # check-ints-equal(*_test-trace-stream.data, 0, msg)
    # push args
  68/push  "F - test-trace-empty-line"/imm32
  68/push  0/imm32
    # push *_test-trace-stream.data
  b8/copy-to-EAX  _test-trace-stream/imm32
  ff          6/subop/push        1/mod/*+disp8   0/rm32/EAX    .           .             .           .           0xc/disp8       .                 # push *(EAX+12)
    # call
  e8/call  check-ints-equal/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
  # end
  c3/return

## helpers

# 3-argument variant of _append
_append-3:  # out : address, outend : address, s : (array byte) -> num_bytes_appended/EAX
  # prolog
  55/push-EBP
  89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
  # save registers
  51/push-ECX
  # _append-4(out, outend, &s.data[0], &s.data[s.length]) -> num_bytes_appended/EAX
    # push &s.data[s.length]
      # EAX = s
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none              0/r32/EAX   0x10/disp8      .                 # copy *(EBP+16) to EAX
      # ECX = s.length
  8b/copy                         0/mod/indirect  0/rm32/EAX    .           .             .           1/r32/ECX   .               .                 # copy *EAX to ECX
      # ECX = &s.data[s.length]
  8d/copy-address                 1/mod/*+disp8   4/rm32/sib    0/base/EAX  1/index/ECX   .           1/r32/ECX   4/disp8         .                 # copy EAX+ECX+4 to ECX
  51/push-ECX
    # push &s.data[0]
  8d/copy-address                 1/mod/*+disp8   0/rm32/EAX    .           .             .           1/r32/ECX   4/disp8         .                 # copy EAX+4 to ECX
  51/push-ECX
    # push outend
  ff          6/subop/push        1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           .           0xc/disp8       .                 # push *(EBP+12)
    # push out
  ff          6/subop/push        1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           .           0x8/disp8       .                 # push *(EBP+8)
    # call
  e8/call  _append-4/disp32
    # discard args
  81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0x10/imm32        # add to ESP
  # restore registers
  59/pop-to-ECX
  # epilog
  89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
  5d/pop-to-EBP
  c3/return

# 4-argument variant of _append
_append-4:  # out : address, outend : address, in : address, inend : address -> num_bytes_appended/EAX
  # prolog
  55/push-EBP
  89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
  # save registers
  51/push-ECX
  52/push-EDX
  53/push-EBX
  56/push-ESI
  57/push-EDI
  # EAX/num_bytes_appended = 0
  b8/copy-to-EAX  0/imm32
  # EDI = out
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           7/r32/EDI   0x8/disp8       .                 # copy *(EBP+8) to EDI
  # EDX = outend
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           2/r32/EDX   0xc/disp8       .                 # copy *(EBP+12) to EDX
  # ESI = in
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           6/r32/ESI   0x10/disp8      .                 # copy *(EBP+16) to ESI
  # ECX = inend
  8b/copy                         1/mod/*+disp8   4/rm32/sib    5/base/EBP  4/index/none  .           1/r32/ECX   0x14/disp8      .                 # copy *(EBP+20) to ECX
$_append-4:loop:
  # if ESI/src >= ECX/srcend break
  39/compare                      3/mod/direct    6/rm32/ESI    .           .             .           1/r32/ECX   .               .                 # compare ESI with ECX
  7d/jump-if-greater-or-equal  $_append-4:end/disp8
  # if EDI/out >= EDX/outend break  (for now silently ignore filled up buffer)
  39/compare                      3/mod/direct    7/rm32/EDI    .           .             .           2/r32/EDX   .               .                 # compare EDI with EDX
  7d/jump-if-greater-or-equal  $_append-4:end/disp8
  # copy one byte from ESI/src to EDI/out
  8a/copy-byte                    0/mod/indirect  6/rm32/ESI    .           .             .           3/r32/BL    .               .                 # copy byte at *ESI to BL
  88/copy-byte                    0/mod/indirect  7/rm32/EDI    .           .             .           3/r32/BL    .               .                 # copy byte at BL to *EDI
  # updates
  40/increment-EAX
  46/increment-ESI
  47/increment-EDI
  eb/jump  $_append-4:loop/disp8
$_append-4:end:
  # restore registers
  5f/pop-to-EDI
  5e/pop-to-ESI
  5b/pop-to-EBX
  5a/pop-to-EDX
  59/pop-to-ECX
  # epilog
  89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
  5d/pop-to-EBP
  c3/return

# vim:nowrap:textwidth=0