https://github.com/akkartik/mu/blob/master/013direct_addressing.cc
   1 //: operating directly on a register
   2 
   3 :(before "End Initialize Op Names")
   4 put_new(Name, "01", "add r32 to rm32 (add)");
   5 
   6 :(code)
   7 void test_add_r32_to_r32() {
   8   Reg[EAX].i = 0x10;
   9   Reg[EBX].i = 1;
  10   run(
  11       "== code 0x1\n"  // code segment
  12       // op     ModR/M  SIB   displacement  immediate
  13       "  01     d8                                    \n" // add EBX to EAX
  14       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
  15   );
  16   CHECK_TRACE_CONTENTS(
  17       "run: add EBX to r/m32\n"
  18       "run: r/m32 is EAX\n"
  19       "run: storing 0x00000011\n"
  20   );
  21 }
  22 
  23 :(before "End Single-Byte Opcodes")
  24 case 0x01: {  // add r32 to r/m32
  25   uint8_t modrm = next();
  26   uint8_t arg2 = (modrm>>3)&0x7;
  27   trace(Callstack_depth+1, "run") << "add " << rname(arg2) << " to r/m32" << end();
  28   int32_t* signed_arg1 = effective_address(modrm);
  29   int32_t signed_result = *signed_arg1 + Reg[arg2].i;
  30   SF = (signed_result < 0);
  31   ZF = (signed_result == 0);
  32   int64_t signed_full_result = static_cast<int64_t>(*signed_arg1) + Reg[arg2].i;
  33   OF = (signed_result != signed_full_result);
  34   // set CF
  35   uint32_t unsigned_arg1 = static_cast<uint32_t>(*signed_arg1);
  36   uint32_t unsigned_result = unsigned_arg1 + Reg[arg2].u;
  37   uint64_t unsigned_full_result = static_cast<uint64_t>(unsigned_arg1) + Reg[arg2].u;
  38   CF = (unsigned_result != unsigned_full_result);
  39   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
  40   *signed_arg1 = signed_result;
  41   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *signed_arg1 << end();
  42   break;
  43 }
  44 
  45 :(code)
  46 void test_add_r32_to_r32_signed_overflow() {
  47   Reg[EAX].i = 0x7fffffff;  // largest positive signed integer
  48   Reg[EBX].i = 1;
  49   run(
  50       "== code 0x1\n"  // code segment
  51       // op     ModR/M  SIB   displacement  immediate
  52       "  01     d8                                    \n" // add EBX to EAX
  53       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
  54   );
  55   CHECK_TRACE_CONTENTS(
  56       "run: add EBX to r/m32\n"
  57       "run: r/m32 is EAX\n"
  58       "run: SF=1; ZF=0; CF=0; OF=1\n"
  59       "run: storing 0x80000000\n"
  60   );
  61 }
  62 
  63 void test_add_r32_to_r32_unsigned_overflow() {
  64   Reg[EAX].u = 0xffffffff;  // largest unsigned number
  65   Reg[EBX].u = 1;
  66   run(
  67       "== code 0x1\n"  // code segment
  68       // op     ModR/M  SIB   displacement  immediate
  69       "  01     d8                                    \n" // add EBX to EAX
  70       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
  71   );
  72   CHECK_TRACE_CONTENTS(
  73       "run: add EBX to r/m32\n"
  74       "run: r/m32 is EAX\n"
  75       "run: SF=0; ZF=1; CF=1; OF=0\n"
  76       "run: storing 0x00000000\n"
  77   );
  78 }
  79 
  80 void test_add_r32_to_r32_unsigned_and_signed_overflow() {
  81   Reg[EAX].u = Reg[EBX].u = 0x80000000;  // smallest negative signed integer
  82   run(
  83       "== code 0x1\n"  // code segment
  84       // op     ModR/M  SIB   displacement  immediate
  85       "  01     d8                                    \n" // add EBX to EAX
  86       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
  87   );
  88   CHECK_TRACE_CONTENTS(
  89       "run: add EBX to r/m32\n"
  90       "run: r/m32 is EAX\n"
  91       "run: SF=0; ZF=1; CF=1; OF=1\n"
  92       "run: storing 0x00000000\n"
  93   );
  94 }
  95 
  96 :(code)
  97 // Implement tables 2-2 and 2-3 in the Intel manual, Volume 2.
  98 // We return a pointer so that instructions can write to multiple bytes in
  99 // 'Mem' at once.
 100 // beware: will eventually have side-effects
 101 int32_t* effective_address(uint8_t modrm) {
 102   const uint8_t mod = (modrm>>6);
 103   // ignore middle 3 'reg opcode' bits
 104   const uint8_t rm = modrm & 0x7;
 105   if (mod == 3) {
 106     // mod 3 is just register direct addressing
 107     trace(Callstack_depth+1, "run") << "r/m32 is " << rname(rm) << end();
 108     return &Reg[rm].i;
 109   }
 110   uint32_t addr = effective_address_number(modrm);
 111   trace(Callstack_depth+1, "run") << "effective address contains 0x" << HEXWORD << read_mem_i32(addr) << end();
 112   return mem_addr_i32(addr);
 113 }
 114 
 115 // beware: will eventually have side-effects
 116 uint32_t effective_address_number(uint8_t modrm) {
 117   const uint8_t mod = (modrm>>6);
 118   // ignore middle 3 'reg opcode' bits
 119   const uint8_t rm = modrm & 0x7;
 120   uint32_t addr = 0;
 121   switch (mod) {
 122   case 3:
 123     // mod 3 is just register direct addressing
 124     raise << "unexpected direct addressing mode\n" << end();
 125     return 0;
 126   // End Mod Special-cases(addr)
 127   default:
 128     cerr << "unrecognized mod bits: " << NUM(mod) << '\n';
 129     exit(1);
 130   }
 131   //: other mods are indirect, and they'll set addr appropriately
 132   // Found effective_address(addr)
 133   return addr;
 134 }
 135 
 136 string rname(uint8_t r) {
 137   switch (r) {
 138   case 0: return "EAX";
 139   case 1: return "ECX";
 140   case 2: return "EDX";
 141   case 3: return "EBX";
 142   case 4: return "ESP";
 143   case 5: return "EBP";
 144   case 6: return "ESI";
 145   case 7: return "EDI";
 146   default: raise << "invalid register " << r << '\n' << end();  return "";
 147   }
 148 }
 149 
 150 //:: subtract
 151 
 152 :(before "End Initialize Op Names")
 153 put_new(Name, "29", "subtract r32 from rm32 (sub)");
 154 
 155 :(code)
 156 void test_subtract_r32_from_r32() {
 157   Reg[EAX].i = 10;
 158   Reg[EBX].i = 1;
 159   run(
 160       "== code 0x1\n"  // code segment
 161       // op     ModR/M  SIB   displacement  immediate
 162       "  29     d8                                    \n"  // subtract EBX from EAX
 163       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 164   );
 165   CHECK_TRACE_CONTENTS(
 166       "run: subtract EBX from r/m32\n"
 167       "run: r/m32 is EAX\n"
 168       "run: storing 0x00000009\n"
 169   );
 170 }
 171 
 172 :(before "End Single-Byte Opcodes")
 173 case 0x29: {  // subtract r32 from r/m32
 174   const uint8_t modrm = next();
 175   const uint8_t arg2 = (modrm>>3)&0x7;
 176   trace(Callstack_depth+1, "run") << "subtract " << rname(arg2) << " from r/m32" << end();
 177   int32_t* signed_arg1 = effective_address(modrm);
 178   int32_t signed_result = *signed_arg1 - Reg[arg2].i;
 179   SF = (signed_result < 0);
 180   ZF = (signed_result == 0);
 181   int64_t signed_full_result = static_cast<int64_t>(*signed_arg1) - Reg[arg2].i;
 182   OF = (signed_result != signed_full_result);
 183   // set CF
 184   uint32_t unsigned_arg1 = static_cast<uint32_t>(*signed_arg1);
 185   uint32_t unsigned_result = unsigned_arg1 - Reg[arg2].u;
 186   uint64_t unsigned_full_result = static_cast<uint64_t>(unsigned_arg1) - Reg[arg2].u;
 187   CF = (unsigned_result != unsigned_full_result);
 188   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 189   *signed_arg1 = signed_result;
 190   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *signed_arg1 << end();
 191   break;
 192 }
 193 
 194 :(code)
 195 void test_subtract_r32_from_r32_signed_overflow() {
 196   Reg[EAX].i = 0x80000000;  // smallest negative signed integer
 197   Reg[EBX].i = 0x7fffffff;  // largest positive signed integer
 198   run(
 199       "== code 0x1\n"  // code segment
 200       // op     ModR/M  SIB   displacement  immediate
 201       "  29     d8                                    \n"  // subtract EBX from EAX
 202       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 203   );
 204   CHECK_TRACE_CONTENTS(
 205       "run: subtract EBX from r/m32\n"
 206       "run: r/m32 is EAX\n"
 207       "run: SF=0; ZF=0; CF=0; OF=1\n"
 208       "run: storing 0x00000001\n"
 209   );
 210 }
 211 
 212 void test_subtract_r32_from_r32_unsigned_overflow() {
 213   Reg[EAX].i = 0;
 214   Reg[EBX].i = 1;
 215   run(
 216       "== code 0x1\n"  // code segment
 217       // op     ModR/M  SIB   displacement  immediate
 218       "  29     d8                                    \n"  // subtract EBX from EAX
 219       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 220   );
 221   CHECK_TRACE_CONTENTS(
 222       "run: subtract EBX from r/m32\n"
 223       "run: r/m32 is EAX\n"
 224       "run: SF=1; ZF=0; CF=1; OF=0\n"
 225       "run: storing 0xffffffff\n"
 226   );
 227 }
 228 
 229 void test_subtract_r32_from_r32_signed_and_unsigned_overflow() {
 230   Reg[EAX].i = 0;
 231   Reg[EBX].i = 0x80000000;  // smallest negative signed integer
 232   run(
 233       "== code 0x1\n"  // code segment
 234       // op     ModR/M  SIB   displacement  immediate
 235       "  29     d8                                    \n"  // subtract EBX from EAX
 236       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 237   );
 238   CHECK_TRACE_CONTENTS(
 239       "run: subtract EBX from r/m32\n"
 240       "run: r/m32 is EAX\n"
 241       "run: SF=1; ZF=0; CF=1; OF=1\n"
 242       "run: storing 0x80000000\n"
 243   );
 244 }
 245 
 246 //:: multiply
 247 
 248 :(before "End Initialize Op Names")
 249 put_new(Name, "f7", "negate/multiply/divide rm32 (with EAX and EDX if necessary) depending on subop (neg/mul/idiv)");
 250 
 251 :(code)
 252 void test_multiply_EAX_by_r32() {
 253   Reg[EAX].i = 4;
 254   Reg[ECX].i = 3;
 255   run(
 256       "== code 0x1\n"  // code segment
 257       // op     ModR/M  SIB   displacement  immediate
 258       "  f7     e1                                    \n"  // multiply EAX by ECX
 259       // ModR/M in binary: 11 (direct mode) 100 (subop mul) 001 (src ECX)
 260   );
 261   CHECK_TRACE_CONTENTS(
 262       "run: operate on r/m32\n"
 263       "run: r/m32 is ECX\n"
 264       "run: subop: multiply EAX by r/m32\n"
 265       "run: storing 0x0000000c\n"
 266   );
 267 }
 268 
 269 :(before "End Single-Byte Opcodes")
 270 case 0xf7: {
 271   const uint8_t modrm = next();
 272   trace(Callstack_depth+1, "run") << "operate on r/m32" << end();
 273   int32_t* arg1 = effective_address(modrm);
 274   const uint8_t subop = (modrm>>3)&0x7;  // middle 3 'reg opcode' bits
 275   switch (subop) {
 276   case 4: {  // mul unsigned EAX by r/m32
 277     trace(Callstack_depth+1, "run") << "subop: multiply EAX by r/m32" << end();
 278     const uint64_t result = static_cast<uint64_t>(Reg[EAX].u) * static_cast<uint32_t>(*arg1);
 279     Reg[EAX].u = result & 0xffffffff;
 280     Reg[EDX].u = result >> 32;
 281     OF = (Reg[EDX].u != 0);
 282     CF = OF;
 283     trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 284     trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << Reg[EAX].u << end();
 285     break;
 286   }
 287   // End Op f7 Subops
 288   default:
 289     cerr << "unrecognized subop for opcode f7: " << NUM(subop) << '\n';
 290     exit(1);
 291   }
 292   break;
 293 }
 294 
 295 //:
 296 
 297 :(before "End Initialize Op Names")
 298 put_new(Name_0f, "af", "multiply rm32 into r32 (imul)");
 299 
 300 :(code)
 301 void test_multiply_r32_into_r32() {
 302   Reg[EAX].i = 4;
 303   Reg[EBX].i = 2;
 304   run(
 305       "== code 0x1\n"  // code segment
 306       // op     ModR/M  SIB   displacement  immediate
 307       "  0f af  d8                                    \n"  // subtract EBX into EAX
 308       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 309   );
 310   CHECK_TRACE_CONTENTS(
 311       "run: multiply EBX by r/m32\n"
 312       "run: r/m32 is EAX\n"
 313       "run: storing 0x00000008\n"
 314   );
 315 }
 316 
 317 :(before "End Two-Byte Opcodes Starting With 0f")
 318 case 0xaf: {  // multiply r32 by r/m32
 319   const uint8_t modrm = next();
 320   const uint8_t arg1 = (modrm>>3)&0x7;
 321   trace(Callstack_depth+1, "run") << "multiply " << rname(arg1) << " by r/m32" << end();
 322   const int32_t* arg2 = effective_address(modrm);
 323   int32_t result = Reg[arg1].i * (*arg2);
 324   int64_t full_result = static_cast<int64_t>(Reg[arg1].i) * (*arg2);
 325   OF = (result != full_result);
 326   CF = OF;
 327   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 328   Reg[arg1].i = result;
 329   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << Reg[arg1].i << end();
 330   break;
 331 }
 332 
 333 //:: negate
 334 
 335 :(code)
 336 void test_negate_r32() {
 337   Reg[EBX].i = 1;
 338   run(
 339       "== code 0x1\n"  // code segment
 340       // op     ModR/M  SIB   displacement  immediate
 341       "  f7     db                                    \n"  // negate EBX
 342       // ModR/M in binary: 11 (direct mode) 011 (subop negate) 011 (dest EBX)
 343   );
 344   CHECK_TRACE_CONTENTS(
 345       "run: operate on r/m32\n"
 346       "run: r/m32 is EBX\n"
 347       "run: subop: negate\n"
 348       "run: storing 0xffffffff\n"
 349   );
 350 }
 351 
 352 :(before "End Op f7 Subops")
 353 case 3: {  // negate r/m32
 354   trace(Callstack_depth+1, "run") << "subop: negate" << end();
 355   // one case that can overflow
 356   if (static_cast<uint32_t>(*arg1) == 0x80000000) {
 357     trace(Callstack_depth+1, "run") << "overflow" << end();
 358     SF = true;
 359     ZF = false;
 360     OF = true;
 361     break;
 362   }
 363   int32_t result = -(*arg1);
 364   SF = (result >> 31);
 365   ZF = (result == 0);
 366   OF = false;
 367   CF = (*arg1 != 0);
 368   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 369   *arg1 = result;
 370   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << end();
 371   break;
 372 }
 373 
 374 :(code)
 375 // negate can overflow in exactly one situation
 376 void test_negate_can_overflow() {
 377   Reg[EBX].i = 0x80000000;  // INT_MIN
 378   run(
 379       "== code 0x1\n"  // code segment
 380       // op     ModR/M  SIB   displacement  immediate
 381       "  f7     db                                    \n"  // negate EBX
 382       // ModR/M in binary: 11 (direct mode) 011 (subop negate) 011 (dest EBX)
 383   );
 384   CHECK_TRACE_CONTENTS(
 385       "run: operate on r/m32\n"
 386       "run: r/m32 is EBX\n"
 387       "run: subop: negate\n"
 388       "run: overflow\n"
 389   );
 390 }
 391 
 392 //:: divide with remainder
 393 
 394 void test_divide_EAX_by_rm32() {
 395   Reg[EAX].u = 7;
 396   Reg[EDX].u = 0;
 397   Reg[ECX].i = 3;
 398   run(
 399       "== code 0x1\n"  // code segment
 400       // op     ModR/M  SIB   displacement  immediate
 401       "  f7     f9                                    \n"  // multiply EAX by ECX
 402       // ModR/M in binary: 11 (direct mode) 111 (subop idiv) 001 (divisor ECX)
 403   );
 404   CHECK_TRACE_CONTENTS(
 405       "run: operate on r/m32\n"
 406       "run: r/m32 is ECX\n"
 407       "run: subop: divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX\n"
 408       "run: quotient: 0x00000002\n"
 409       "run: remainder: 0x00000001\n"
 410   );
 411 }
 412 
 413 :(before "End Op f7 Subops")
 414 case 7: {  // divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX
 415   trace(Callstack_depth+1, "run") << "subop: divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX" << end();
 416   int64_t dividend = static_cast<int64_t>((static_cast<uint64_t>(Reg[EDX].u) << 32) | Reg[EAX].u);
 417   int32_t divisor = *arg1;
 418   assert(divisor != 0);
 419   Reg[EAX].i = dividend/divisor;  // quotient
 420   Reg[EDX].i = dividend%divisor;  // remainder
 421   // flag state undefined
 422   trace(Callstack_depth+1, "run") << "quotient: 0x" << HEXWORD << Reg[EAX].i << end();
 423   trace(Callstack_depth+1, "run") << "remainder: 0x" << HEXWORD << Reg[EDX].i << end();
 424   break;
 425 }
 426 
 427 :(code)
 428 void test_divide_EAX_by_negative_rm32() {
 429   Reg[EAX].u = 7;
 430   Reg[EDX].u = 0;
 431   Reg[ECX].i = -3;
 432   run(
 433       "== code 0x1\n"  // code segment
 434       // op     ModR/M  SIB   displacement  immediate
 435       "  f7     f9                                    \n"  // multiply EAX by ECX
 436       // ModR/M in binary: 11 (direct mode) 111 (subop idiv) 001 (divisor ECX)
 437   );
 438   CHECK_TRACE_CONTENTS(
 439       "run: operate on r/m32\n"
 440       "run: r/m32 is ECX\n"
 441       "run: subop: divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX\n"
 442       "run: quotient: 0xfffffffe\n"  // -2
 443       "run: remainder: 0x00000001\n"
 444   );
 445 }
 446 
 447 void test_divide_negative_EAX_by_rm32() {
 448   Reg[EAX].i = -7;
 449   Reg[EDX].i = -1;  // sign extend
 450   Reg[ECX].i = 3;
 451   run(
 452       "== code 0x1\n"  // code segment
 453       // op     ModR/M  SIB   displacement  immediate
 454       "  f7     f9                                    \n"  // multiply EAX by ECX
 455       // ModR/M in binary: 11 (direct mode) 111 (subop idiv) 001 (divisor ECX)
 456   );
 457   CHECK_TRACE_CONTENTS(
 458       "run: operate on r/m32\n"
 459       "run: r/m32 is ECX\n"
 460       "run: subop: divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX\n"
 461       "run: quotient: 0xfffffffe\n"  // -2
 462       "run: remainder: 0xffffffff\n"  // -1, same sign as divident (EDX:EAX)
 463   );
 464 }
 465 
 466 void test_divide_negative_EDX_EAX_by_rm32() {
 467   Reg[EAX].i = 0;  // lower 32 bits are clear
 468   Reg[EDX].i = -7;
 469   Reg[ECX].i = 0x40000000;  // 2^30 (largest positive power of 2)
 470   run(
 471       "== code 0x1\n"  // code segment
 472       // op     ModR/M  SIB   displacement  immediate
 473       "  f7     f9                                    \n"  // multiply EAX by ECX
 474       // ModR/M in binary: 11 (direct mode) 111 (subop idiv) 001 (divisor ECX)
 475   );
 476   CHECK_TRACE_CONTENTS(
 477       "run: operate on r/m32\n"
 478       "run: r/m32 is ECX\n"
 479       "run: subop: divide EDX:EAX by r/m32, storing quotient in EAX and remainder in EDX\n"
 480       "run: quotient: 0xffffffe4\n"  // (-7 << 32) / (1 << 30) = -7 << 2 = -28
 481       "run: remainder: 0x00000000\n"
 482   );
 483 }
 484 
 485 //:: shift left
 486 
 487 :(before "End Initialize Op Names")
 488 put_new(Name, "d3", "shift rm32 by CL bits depending on subop (sal/sar/shl/shr)");
 489 
 490 :(code)
 491 void test_shift_left_r32_with_cl() {
 492   Reg[EBX].i = 13;
 493   Reg[ECX].i = 1;
 494   run(
 495       "== code 0x1\n"  // code segment
 496       // op     ModR/M  SIB   displacement  immediate
 497       "  d3     e3                                    \n"  // shift EBX left by CL bits
 498       // ModR/M in binary: 11 (direct mode) 100 (subop shift left) 011 (dest EBX)
 499   );
 500   CHECK_TRACE_CONTENTS(
 501       "run: operate on r/m32\n"
 502       "run: r/m32 is EBX\n"
 503       "run: subop: shift left by CL bits\n"
 504       "run: storing 0x0000001a\n"
 505   );
 506 }
 507 
 508 :(before "End Single-Byte Opcodes")
 509 case 0xd3: {
 510   const uint8_t modrm = next();
 511   trace(Callstack_depth+1, "run") << "operate on r/m32" << end();
 512   int32_t* arg1 = effective_address(modrm);
 513   const uint8_t subop = (modrm>>3)&0x7;  // middle 3 'reg opcode' bits
 514   switch (subop) {
 515   case 4: {  // shift left r/m32 by CL
 516     trace(Callstack_depth+1, "run") << "subop: shift left by CL bits" << end();
 517     uint8_t count = Reg[ECX].u & 0x1f;
 518     // OF is only defined if count is 1
 519     if (count == 1) {
 520       bool msb = (*arg1 & 0x80000000) >> 1;
 521       bool pnsb = (*arg1 & 0x40000000);
 522       OF = (msb != pnsb);
 523     }
 524     int32_t result = (*arg1 << count);
 525     ZF = (result == 0);
 526     SF = (result < 0);
 527     CF = (*arg1 << (count-1)) & 0x80000000;
 528     trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 529     *arg1 = result;
 530     trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << end();
 531     break;
 532   }
 533   // End Op d3 Subops
 534   default:
 535     cerr << "unrecognized subop for opcode d3: " << NUM(subop) << '\n';
 536     exit(1);
 537   }
 538   break;
 539 }
 540 
 541 //:: shift right arithmetic
 542 
 543 :(code)
 544 void test_shift_right_arithmetic_r32_with_cl() {
 545   Reg[EBX].i = 26;
 546   Reg[ECX].i = 1;
 547   run(
 548       "== code 0x1\n"  // code segment
 549       // op     ModR/M  SIB   displacement  immediate
 550       "  d3     fb                                    \n"  // shift EBX right by CL bits, while preserving sign
 551       // ModR/M in binary: 11 (direct mode) 111 (subop shift right arithmetic) 011 (dest EBX)
 552   );
 553   CHECK_TRACE_CONTENTS(
 554       "run: operate on r/m32\n"
 555       "run: r/m32 is EBX\n"
 556       "run: subop: shift right by CL bits, while preserving sign\n"
 557       "run: storing 0x0000000d\n"
 558   );
 559 }
 560 
 561 :(before "End Op d3 Subops")
 562 case 7: {  // shift right r/m32 by CL, preserving sign
 563   trace(Callstack_depth+1, "run") << "subop: shift right by CL bits, while preserving sign" << end();
 564   uint8_t count = Reg[ECX].u & 0x1f;
 565   *arg1 = (*arg1 >> count);
 566   ZF = (*arg1 == 0);
 567   SF = (*arg1 < 0);
 568   // OF is only defined if count is 1
 569   if (count == 1) OF = false;
 570   // CF undefined
 571   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << end();
 572   break;
 573 }
 574 
 575 :(code)
 576 void test_shift_right_arithmetic_odd_r32_with_cl() {
 577   Reg[EBX].i = 27;
 578   Reg[ECX].i = 1;
 579   run(
 580       "== code 0x1\n"  // code segment
 581       // op     ModR/M  SIB   displacement  immediate
 582       "  d3     fb                                    \n"  // shift EBX right by CL bits, while preserving sign
 583       // ModR/M in binary: 11 (direct mode) 111 (subop shift right arithmetic) 011 (dest EBX)
 584   );
 585   CHECK_TRACE_CONTENTS(
 586       "run: operate on r/m32\n"
 587       "run: r/m32 is EBX\n"
 588       "run: subop: shift right by CL bits, while preserving sign\n"
 589       // result: 13
 590       "run: storing 0x0000000d\n"
 591   );
 592 }
 593 
 594 void test_shift_right_arithmetic_negative_r32_with_cl() {
 595   Reg[EBX].i = 0xfffffffd;  // -3
 596   Reg[ECX].i = 1;
 597   run(
 598       "== code 0x1\n"  // code segment
 599       // op     ModR/M  SIB   displacement  immediate
 600       "  d3     fb                                    \n"  // shift EBX right by CL bits, while preserving sign
 601       // ModR/M in binary: 11 (direct mode) 111 (subop shift right arithmetic) 011 (dest EBX)
 602   );
 603   CHECK_TRACE_CONTENTS(
 604       "run: operate on r/m32\n"
 605       "run: r/m32 is EBX\n"
 606       "run: subop: shift right by CL bits, while preserving sign\n"
 607       // result: -2
 608       "run: storing 0xfffffffe\n"
 609   );
 610 }
 611 
 612 //:: shift right logical
 613 
 614 :(code)
 615 void test_shift_right_logical_r32_with_cl() {
 616   Reg[EBX].i = 26;
 617   Reg[ECX].i = 1;
 618   run(
 619       "== code 0x1\n"  // code segment
 620       // op     ModR/M  SIB   displacement  immediate
 621       "  d3     eb                                    \n"  // shift EBX right by CL bits, while padding zeroes
 622       // ModR/M in binary: 11 (direct mode) 101 (subop shift right logical) 011 (dest EBX)
 623   );
 624   CHECK_TRACE_CONTENTS(
 625       "run: operate on r/m32\n"
 626       "run: r/m32 is EBX\n"
 627       "run: subop: shift right by CL bits, while padding zeroes\n"
 628       // result: 13
 629       "run: storing 0x0000000d\n"
 630   );
 631 }
 632 
 633 :(before "End Op d3 Subops")
 634 case 5: {  // shift right r/m32 by CL, padding zeroes
 635   trace(Callstack_depth+1, "run") << "subop: shift right by CL bits, while padding zeroes" << end();
 636   uint8_t count = Reg[ECX].u & 0x1f;
 637   // OF is only defined if count is 1
 638   if (count == 1) {
 639     bool msb = (*arg1 & 0x80000000) >> 1;
 640     bool pnsb = (*arg1 & 0x40000000);
 641     OF = (msb != pnsb);
 642   }
 643   uint32_t* uarg1 = reinterpret_cast<uint32_t*>(arg1);
 644   *uarg1 = (*uarg1 >> count);
 645   ZF = (*uarg1 == 0);
 646   // result is always positive by definition
 647   SF = false;
 648   // CF undefined
 649   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << end();
 650   break;
 651 }
 652 
 653 :(code)
 654 void test_shift_right_logical_odd_r32_with_cl() {
 655   Reg[EBX].i = 27;
 656   Reg[ECX].i = 1;
 657   run(
 658       "== code 0x1\n"  // code segment
 659       // op     ModR/M  SIB   displacement  immediate
 660       "  d3     eb                                    \n"  // shift EBX right by CL bits, while padding zeroes
 661       // ModR/M in binary: 11 (direct mode) 101 (subop shift right logical) 011 (dest EBX)
 662   );
 663   CHECK_TRACE_CONTENTS(
 664       "run: operate on r/m32\n"
 665       "run: r/m32 is EBX\n"
 666       "run: subop: shift right by CL bits, while padding zeroes\n"
 667       // result: 13
 668       "run: storing 0x0000000d\n"
 669   );
 670 }
 671 
 672 void test_shift_right_logical_negative_r32_with_cl() {
 673   Reg[EBX].i = 0xfffffffd;
 674   Reg[ECX].i = 1;
 675   run(
 676       "== code 0x1\n"  // code segment
 677       // op     ModR/M  SIB   displacement  immediate
 678       "  d3     eb                                    \n"  // shift EBX right by CL bits, while padding zeroes
 679       // ModR/M in binary: 11 (direct mode) 101 (subop shift right logical) 011 (dest EBX)
 680   );
 681   CHECK_TRACE_CONTENTS(
 682       "run: operate on r/m32\n"
 683       "run: r/m32 is EBX\n"
 684       "run: subop: shift right by CL bits, while padding zeroes\n"
 685       "run: storing 0x7ffffffe\n"
 686   );
 687 }
 688 
 689 //:: and
 690 
 691 :(before "End Initialize Op Names")
 692 put_new(Name, "21", "rm32 = bitwise AND of r32 with rm32 (and)");
 693 
 694 :(code)
 695 void test_and_r32_with_r32() {
 696   Reg[EAX].i = 0x0a0b0c0d;
 697   Reg[EBX].i = 0x000000ff;
 698   run(
 699       "== code 0x1\n"  // code segment
 700       // op     ModR/M  SIB   displacement  immediate
 701       "  21     d8                                    \n"  // and EBX with destination EAX
 702       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 703   );
 704   CHECK_TRACE_CONTENTS(
 705       "run: and EBX with r/m32\n"
 706       "run: r/m32 is EAX\n"
 707       "run: storing 0x0000000d\n"
 708   );
 709 }
 710 
 711 :(before "End Single-Byte Opcodes")
 712 case 0x21: {  // and r32 with r/m32
 713   const uint8_t modrm = next();
 714   const uint8_t arg2 = (modrm>>3)&0x7;
 715   trace(Callstack_depth+1, "run") << "and " << rname(arg2) << " with r/m32" << end();
 716   // bitwise ops technically operate on unsigned numbers, but it makes no
 717   // difference
 718   int32_t* signed_arg1 = effective_address(modrm);
 719   *signed_arg1 &= Reg[arg2].i;
 720   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *signed_arg1 << end();
 721   SF = (*signed_arg1 >> 31);
 722   ZF = (*signed_arg1 == 0);
 723   CF = false;
 724   OF = false;
 725   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 726   break;
 727 }
 728 
 729 //:: or
 730 
 731 :(before "End Initialize Op Names")
 732 put_new(Name, "09", "rm32 = bitwise OR of r32 with rm32 (or)");
 733 
 734 :(code)
 735 void test_or_r32_with_r32() {
 736   Reg[EAX].i = 0x0a0b0c0d;
 737   Reg[EBX].i = 0xa0b0c0d0;
 738   run(
 739       "== code 0x1\n"  // code segment
 740       // op     ModR/M  SIB   displacement  immediate
 741       "  09     d8                                    \n"  // or EBX with destination EAX
 742       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 743   );
 744   CHECK_TRACE_CONTENTS(
 745       "run: or EBX with r/m32\n"
 746       "run: r/m32 is EAX\n"
 747       "run: storing 0xaabbccdd\n"
 748   );
 749 }
 750 
 751 :(before "End Single-Byte Opcodes")
 752 case 0x09: {  // or r32 with r/m32
 753   const uint8_t modrm = next();
 754   const uint8_t arg2 = (modrm>>3)&0x7;
 755   trace(Callstack_depth+1, "run") << "or " << rname(arg2) << " with r/m32" << end();
 756   // bitwise ops technically operate on unsigned numbers, but it makes no
 757   // difference
 758   int32_t* signed_arg1 = effective_address(modrm);
 759   *signed_arg1 |= Reg[arg2].i;
 760   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *signed_arg1 << end();
 761   SF = (*signed_arg1 >> 31);
 762   ZF = (*signed_arg1 == 0);
 763   CF = false;
 764   OF = false;
 765   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 766   break;
 767 }
 768 
 769 //:: xor
 770 
 771 :(before "End Initialize Op Names")
 772 put_new(Name, "31", "rm32 = bitwise XOR of r32 with rm32 (xor)");
 773 
 774 :(code)
 775 void test_xor_r32_with_r32() {
 776   Reg[EAX].i = 0x0a0b0c0d;
 777   Reg[EBX].i = 0xaabbc0d0;
 778   run(
 779       "== code 0x1\n"  // code segment
 780       // op     ModR/M  SIB   displacement  immediate
 781       "  31     d8                                    \n"  // xor EBX with destination EAX
 782       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 783   );
 784   CHECK_TRACE_CONTENTS(
 785       "run: xor EBX with r/m32\n"
 786       "run: r/m32 is EAX\n"
 787       "run: storing 0xa0b0ccdd\n"
 788   );
 789 }
 790 
 791 :(before "End Single-Byte Opcodes")
 792 case 0x31: {  // xor r32 with r/m32
 793   const uint8_t modrm = next();
 794   const uint8_t arg2 = (modrm>>3)&0x7;
 795   trace(Callstack_depth+1, "run") << "xor " << rname(arg2) << " with r/m32" << end();
 796   // bitwise ops technically operate on unsigned numbers, but it makes no
 797   // difference
 798   int32_t* signed_arg1 = effective_address(modrm);
 799   *signed_arg1 ^= Reg[arg2].i;
 800   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *signed_arg1 << end();
 801   SF = (*signed_arg1 >> 31);
 802   ZF = (*signed_arg1 == 0);
 803   CF = false;
 804   OF = false;
 805   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 806   break;
 807 }
 808 
 809 //:: not
 810 
 811 :(code)
 812 void test_not_r32() {
 813   Reg[EBX].i = 0x0f0f00ff;
 814   run(
 815       "== code 0x1\n"  // code segment
 816       // op     ModR/M  SIB   displacement  immediate
 817       "  f7     d3                                    \n"  // not EBX
 818       // ModR/M in binary: 11 (direct mode) 010 (subop not) 011 (dest EBX)
 819   );
 820   CHECK_TRACE_CONTENTS(
 821       "run: operate on r/m32\n"
 822       "run: r/m32 is EBX\n"
 823       "run: subop: not\n"
 824       "run: storing 0xf0f0ff00\n"
 825   );
 826 }
 827 
 828 :(before "End Op f7 Subops")
 829 case 2: {  // not r/m32
 830   trace(Callstack_depth+1, "run") << "subop: not" << end();
 831   *arg1 = ~(*arg1);
 832   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << end();
 833   // no flags affected
 834   break;
 835 }
 836 
 837 //:: compare (cmp)
 838 
 839 :(before "End Initialize Op Names")
 840 put_new(Name, "39", "compare: set SF if rm32 < r32 (cmp)");
 841 
 842 :(code)
 843 void test_compare_r32_with_r32_greater() {
 844   Reg[EAX].i = 0x0a0b0c0d;
 845   Reg[EBX].i = 0x0a0b0c07;
 846   run(
 847       "== code 0x1\n"  // code segment
 848       // op     ModR/M  SIB   displacement  immediate
 849       "  39     d8                                    \n"  // compare EAX with EBX
 850       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 851   );
 852   CHECK_TRACE_CONTENTS(
 853       "run: compare r/m32 with EBX\n"
 854       "run: r/m32 is EAX\n"
 855       "run: SF=0; ZF=0; CF=0; OF=0\n"
 856   );
 857 }
 858 
 859 :(before "End Single-Byte Opcodes")
 860 case 0x39: {  // set SF if r/m32 < r32
 861   const uint8_t modrm = next();
 862   const uint8_t reg2 = (modrm>>3)&0x7;
 863   trace(Callstack_depth+1, "run") << "compare r/m32 with " << rname(reg2) << end();
 864   const int32_t* signed_arg1 = effective_address(modrm);
 865   const int32_t signed_difference = *signed_arg1 - Reg[reg2].i;
 866   SF = (signed_difference < 0);
 867   ZF = (signed_difference == 0);
 868   const int64_t signed_full_difference = static_cast<int64_t>(*signed_arg1) - Reg[reg2].i;
 869   OF = (signed_difference != signed_full_difference);
 870   // set CF
 871   const uint32_t unsigned_arg1 = static_cast<uint32_t>(*signed_arg1);
 872   const uint32_t unsigned_difference = unsigned_arg1 - Reg[reg2].u;
 873   const uint64_t unsigned_full_difference = static_cast<uint64_t>(unsigned_arg1) - Reg[reg2].u;
 874   CF = (unsigned_difference != unsigned_full_difference);
 875   trace(Callstack_depth+1, "run") << "SF=" << SF << "; ZF=" << ZF << "; CF=" << CF << "; OF=" << OF << end();
 876   break;
 877 }
 878 
 879 :(code)
 880 void test_compare_r32_with_r32_lesser_unsigned_and_signed() {
 881   Reg[EAX].i = 0x0a0b0c07;
 882   Reg[EBX].i = 0x0a0b0c0d;
 883   run(
 884       "== code 0x1\n"  // code segment
 885       // op     ModR/M  SIB   displacement  immediate
 886       "  39     d8                                    \n"  // compare EAX with EBX
 887       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 888   );
 889   CHECK_TRACE_CONTENTS(
 890       "run: compare r/m32 with EBX\n"
 891       "run: r/m32 is EAX\n"
 892       "run: SF=1; ZF=0; CF=1; OF=0\n"
 893   );
 894 }
 895 
 896 void test_compare_r32_with_r32_lesser_unsigned_and_signed_due_to_overflow() {
 897   Reg[EAX].i = 0x7fffffff;  // largest positive signed integer
 898   Reg[EBX].i = 0x80000000;  // smallest negative signed integer
 899   run(
 900       "== code 0x1\n"  // code segment
 901       // op     ModR/M  SIB   displacement  immediate
 902       "  39     d8                                    \n"  // compare EAX with EBX
 903       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 904   );
 905   CHECK_TRACE_CONTENTS(
 906       "run: compare r/m32 with EBX\n"
 907       "run: r/m32 is EAX\n"
 908       "run: SF=1; ZF=0; CF=1; OF=1\n"
 909   );
 910 }
 911 
 912 void test_compare_r32_with_r32_lesser_signed() {
 913   Reg[EAX].i = 0xffffffff;  // -1
 914   Reg[EBX].i = 0x00000001;  // 1
 915   run(
 916       "== code 0x1\n"  // code segment
 917       // op     ModR/M  SIB   displacement  immediate
 918       "  39     d8                                    \n"  // compare EAX with EBX
 919       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 920   );
 921   CHECK_TRACE_CONTENTS(
 922       "run: compare r/m32 with EBX\n"
 923       "run: r/m32 is EAX\n"
 924       "run: SF=1; ZF=0; CF=0; OF=0\n"
 925   );
 926 }
 927 
 928 void test_compare_r32_with_r32_lesser_unsigned() {
 929   Reg[EAX].i = 0x00000001;  // 1
 930   Reg[EBX].i = 0xffffffff;  // -1
 931   run(
 932       "== code 0x1\n"  // code segment
 933       // op     ModR/M  SIB   displacement  immediate
 934       "  39     d8                                    \n"  // compare EAX with EBX
 935       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 936   );
 937   CHECK_TRACE_CONTENTS(
 938       "run: compare r/m32 with EBX\n"
 939       "run: r/m32 is EAX\n"
 940       "run: SF=0; ZF=0; CF=1; OF=0\n"
 941   );
 942 }
 943 
 944 void test_compare_r32_with_r32_equal() {
 945   Reg[EAX].i = 0x0a0b0c0d;
 946   Reg[EBX].i = 0x0a0b0c0d;
 947   run(
 948       "== code 0x1\n"  // code segment
 949       // op     ModR/M  SIB   displacement  immediate
 950       "  39     d8                                    \n"  // compare EAX and EBX
 951       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 952   );
 953   CHECK_TRACE_CONTENTS(
 954       "run: compare r/m32 with EBX\n"
 955       "run: r/m32 is EAX\n"
 956       "run: SF=0; ZF=1; CF=0; OF=0\n"
 957   );
 958 }
 959 
 960 //:: copy (mov)
 961 
 962 :(before "End Initialize Op Names")
 963 put_new(Name, "89", "copy r32 to rm32 (mov)");
 964 
 965 :(code)
 966 void test_copy_r32_to_r32() {
 967   Reg[EBX].i = 0xaf;
 968   run(
 969       "== code 0x1\n"  // code segment
 970       // op     ModR/M  SIB   displacement  immediate
 971       "  89     d8                                    \n"  // copy EBX to EAX
 972       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
 973   );
 974   CHECK_TRACE_CONTENTS(
 975       "run: copy EBX to r/m32\n"
 976       "run: r/m32 is EAX\n"
 977       "run: storing 0x000000af\n"
 978   );
 979 }
 980 
 981 :(before "End Single-Byte Opcodes")
 982 case 0x89: {  // copy r32 to r/m32
 983   const uint8_t modrm = next();
 984   const uint8_t rsrc = (modrm>>3)&0x7;
 985   trace(Callstack_depth+1, "run") << "copy " << rname(rsrc) << " to r/m32" << end();
 986   int32_t* dest = effective_address(modrm);
 987   *dest = Reg[rsrc].i;  // Write multiple elements of vector<uint8_t> at once. Assumes sizeof(int) == 4 on the host as well.
 988   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *dest << end();
 989   break;
 990 }
 991 
 992 //:: xchg
 993 
 994 :(before "End Initialize Op Names")
 995 put_new(Name, "87", "swap the contents of r32 and rm32 (xchg)");
 996 
 997 :(code)
 998 void test_xchg_r32_with_r32() {
 999   Reg[EBX].i = 0xaf;
1000   Reg[EAX].i = 0x2e;
1001   run(
1002       "== code 0x1\n"  // code segment
1003       // op     ModR/M  SIB   displacement  immediate
1004       "  87     d8                                    \n"  // exchange EBX with EAX
1005       // ModR/M in binary: 11 (direct mode) 011 (src EBX) 000 (dest EAX)
1006   );
1007   CHECK_TRACE_CONTENTS(
1008       "run: exchange EBX with r/m32\n"
1009       "run: r/m32 is EAX\n"
1010       "run: storing 0x000000af in r/m32\n"
1011       "run: storing 0x0000002e in EBX\n"
1012   );
1013 }
1014 
1015 :(before "End Single-Byte Opcodes")
1016 case 0x87: {  // exchange r32 with r/m32
1017   const uint8_t modrm = next();
1018   const uint8_t reg2 = (modrm>>3)&0x7;
1019   trace(Callstack_depth+1, "run") << "exchange " << rname(reg2) << " with r/m32" << end();
1020   int32_t* arg1 = effective_address(modrm);
1021   const int32_t tmp = *arg1;
1022   *arg1 = Reg[reg2].i;
1023   Reg[reg2].i = tmp;
1024   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << *arg1 << " in r/m32" << end();
1025   trace(Callstack_depth+1, "run") << "storing 0x" << HEXWORD << Reg[reg2].i << " in " << rname(reg2) << end();
1026   break;
1027 }
1028 
1029 //:: increment
1030 
1031 :(before "End Initialize Op Names")
1032 put_new(Name, "40", "increment EAX (inc)");
1033 put_new(Name, "41", "increment ECX (inc)");
1034 put_new(Name, "42", "increment EDX (inc)");
1035 put_new(Name, "43", "increment EBX (inc)");
1036 put_new(Name, "44", "increment ESP (inc)");
1037 put_new(Name, "45", "increment EBP (inc)");
1038 put_new(Name, "46", "increment ESI (inc)");
1039 put_new(Name, "47", "increment EDI (inc)");
1040 
1041 :(code)
1042 void test_increment_r32() {
1043   Reg[ECX].u = 0x1f;
1044   run(
1045       "== code 0x1\n"  // code segment
1046       // op     ModR/M  SIB   displacement  immediate
1047       "  41                                           \n"  // increment ECX
1048   );
1049   CHECK_TRACE_CONTENTS(
1050       "run: increment ECX\n"
1051       "run: storing value 0x00000020\n"
1052   );
1053 }
1054 
1055 :(before "End Single-Byte Opcodes")
1056 case 0x40:
1057 case 0x41:
1058 case 0x42:
1059 case 0x43:
1060 case 0x44:
1061 case 0x45:
1062 case 0x46:
1063 case 0x47: {  // increment r32
1064   const uint8_t reg = op & 0x7;
1065   trace(Callstack_depth+1, "run") << "increment " << rname(reg) << end();
1066   ++Reg[reg].u;
1067   trace(Callstack_depth+1, "run") << "storing value 0x" << HEXWORD << Reg[reg].u << end();
1068   break;
1069 }
1070 
1071 :(before "End Initialize Op Names")
1072 put_new(Name, "ff", "increment/decrement/jump/push/call rm32 based on subop (inc/dec/jmp/push/call)");
1073 
1074 :(code)
1075 void test_increment_rm32() {
1076   Reg[EAX].u = 0x20;
1077   run(
1078       "== code 0x1\n"  // code segment
1079       // op     ModR/M  SIB   displacement  immediate
1080       "  ff     c0                                    \n"  // increment EAX
1081       // ModR/M in binary: 11 (direct mode) 000 (subop inc) 000 (EAX)
1082   );
1083   CHECK_TRACE_CONTENTS(
1084       "run: increment r/m32\n"
1085       "run: r/m32 is EAX\n"
1086       "run: storing value 0x00000021\n"
1087   );
1088 }
1089 
1090 :(before "End Single-Byte Opcodes")
1091 case 0xff: {
1092   const uint8_t modrm = next();
1093   const uint8_t subop = (modrm>>3)&0x7;  // middle 3 'reg opcode' bits
1094   switch (subop) {
1095     case 0: {  // increment r/m32
1096       trace(Callstack_depth+1, "run") << "increment r/m32" << end();
1097       int32_t* arg = effective_address(modrm);
1098       ++*arg;
1099       trace(Callstack_depth+1, "run") << "storing value 0x" << HEXWORD << *arg << end();
1100       break;
1101     }
1102     default:
1103       cerr << "unrecognized subop for ff: " << HEXBYTE << NUM(subop) << '\n';
1104       exit(1);
1105     // End Op ff Subops
1106   }
1107   break;
1108 }
1109 
1110 //:: decrement
1111 
1112 :(before "End Initialize Op Names")
1113 put_new(Name, "48", "decrement EAX (dec)");
1114 put_new(Name, "49", "decrement ECX (dec)");
1115 put_new(Name, "4a", "decrement EDX (dec)");
1116 put_new(Name, "4b", "decrement EBX (dec)");
1117 put_new(Name, "4c", "decrement ESP (dec)");
1118 put_new(Name, "4d", "decrement EBP (dec)");
1119 put_new(Name, "4e", "decrement ESI (dec)");
1120 put_new(Name, "4f", "decrement EDI (dec)");
1121 
1122 :(code)
1123 void test_decrement_r32() {
1124   Reg[ECX].u = 0x1f;
1125   run(
1126       "== code 0x1\n"  // code segment
1127       // op     ModR/M  SIB   displacement  immediate
1128       "  49                                           \n"  // decrement ECX
1129   );
1130   CHECK_TRACE_CONTENTS(
1131       "run: decrement ECX\n"
1132       "run: storing value 0x0000001e\n"
1133   );
1134 }
1135 
1136 :(before "End Single-Byte Opcodes")
1137 case 0x48:
1138 case 0x49:
1139 case 0x4a:
1140 case 0x4b:
1141 case 0x4c:
1142 case 0x4d:
1143 case 0x4e:
1144 case 0x4f: {  // decrement r32
1145   const uint8_t reg = op & 0x7;
1146   trace(Callstack_depth+1, "run") << "decrement " << rname(reg) << end();
1147   --Reg[reg].u;
1148   trace(Callstack_depth+1, "run") << "storing value 0x" << HEXWORD << Reg[reg].u << end();
1149   break;
1150 }
1151 
1152 :(code)
1153 void test_decrement_rm32() {
1154   Reg[EAX].u = 0x20;
1155   run(
1156       "== code 0x1\n"  // code segment
1157       // op     ModR/M  SIB   displacement  immediate
1158       "  ff     c8                                    \n"  // decrement EAX
1159       // ModR/M in binary: 11 (direct mode) 001 (subop inc) 000 (EAX)
1160   );
1161   CHECK_TRACE_CONTENTS(
1162       "run: decrement r/m32\n"
1163       "run: r/m32 is EAX\n"
1164       "run: storing value 0x0000001f\n"
1165   );
1166 }
1167 
1168 :(before "End Op ff Subops")
1169 case 1: {  // decrement r/m32
1170   trace(Callstack_depth+1, "run") << "decrement r/m32" << end();
1171   int32_t* arg = effective_address(modrm);
1172   --*arg;
1173   trace(Callstack_depth+1, "run") << "storing value 0x" << HEXWORD << *arg << end();
1174   break;
1175 }
1176 
1177 //:: push
1178 
1179 :(before "End Initialize Op Names")
1180 put_new(Name, "50", "push EAX to stack (push)");
1181 put_new(Name, "51", "push ECX to stack (push)");
1182 put_new(Name, "52", "push EDX to stack (push)");
1183 put_new(Name, "53", "push EBX to stack (push)");
1184 put_new(Name, "54", "push ESP to stack (push)");
1185 put_new(Name, "55", "push EBP to stack (push)");
1186 put_new(Name, "56", "push ESI to stack (push)");
1187 put_new(Name, "57", "push EDI to stack (push)");
1188 
1189 :(code)
1190 void test_push_r32() {
1191   Mem.push_back(vma(0xbd000000));  // manually allocate memory
1192   Reg[ESP].u = 0xbd000008;
1193   Reg[EBX].i = 0x0000000a;
1194   run(
1195       "== code 0x1\n"  // code segment
1196       // op     ModR/M  SIB   displacement  immediate
1197       "  53                                           \n"  // push EBX to stack
1198   );
1199   CHECK_TRACE_CONTENTS(
1200       "run: push EBX\n"
1201       "run: decrementing ESP to 0xbd000004\n"
1202       "run: pushing value 0x0000000a\n"
1203   );
1204 }
1205 
1206 :(before "End Single-Byte Opcodes")
1207 case 0x50:
1208 case 0x51:
1209 case 0x52:
1210 case 0x53:
1211 case 0x54:
1212 case 0x55:
1213 case 0x56:
1214 case 0x57: {  // push r32 to stack
1215   uint8_t reg = op & 0x7;
1216   trace(Callstack_depth+1, "run") << "push " << rname(reg) << end();
1217 //?   cerr << "push: " << NUM(reg) << ": " << Reg[reg].u << " => " << Reg[ESP].u << '\n';
1218   push(Reg[reg].u);
1219   break;
1220 }
1221 
1222 //:: pop
1223 
1224 :(before "End Initialize Op Names")
1225 put_new(Name, "58", "pop top of stack to EAX (pop)");
1226 put_new(Name, "59", "pop top of stack to ECX (pop)");
1227 put_new(Name, "5a", "pop top of stack to EDX (pop)");
1228 put_new(Name, "5b", "pop top of stack to EBX (pop)");
1229 put_new(Name, "5c", "pop top of stack to ESP (pop)");
1230 put_new(Name, "5d", "pop top of stack to EBP (pop)");
1231 put_new(Name, "5e", "pop top of stack to ESI (pop)");
1232 put_new(Name, "5f", "pop top of stack to EDI (pop)");
1233 
1234 :(code)
1235 void test_pop_r32() {
1236   Mem.push_back(vma(0xbd000000));  // manually allocate memory
1237   Reg[ESP].u = 0xbd000008;
1238   write_mem_i32(0xbd000008, 0x0000000a);  // ..before this write
1239   run(
1240       "== code 0x1\n"  // code segment
1241       // op     ModR/M  SIB   displacement  immediate
1242       "  5b                                           \n"  // pop stack to EBX
1243       "== data 0x2000\n"  // data segment
1244       "0a 00 00 00\n"  // 0x0000000a
1245   );
1246   CHECK_TRACE_CONTENTS(
1247       "run: pop into EBX\n"
1248       "run: popping value 0x0000000a\n"
1249       "run: incrementing ESP to 0xbd00000c\n"
1250   );
1251 }
1252 
1253 :(before "End Single-Byte Opcodes")
1254 case 0x58:
1255 case 0x59:
1256 case 0x5a:
1257 case 0x5b:
1258 case 0x5c:
1259 case 0x5d:
1260 case 0x5e:
1261 case 0x5f: {  // pop stack into r32
1262   const uint8_t reg = op & 0x7;
1263   trace(Callstack_depth+1, "run") << "pop into " << rname(reg) << end();
1264 //?   cerr << "pop from " << Reg[ESP].u << '\n';
1265   Reg[reg].u = pop();
1266 //?   cerr << "=> " << NUM(reg) << ": " << Reg[reg].u << '\n';
1267   break;
1268 }
1269 :(code)
1270 uint32_t pop() {
1271   const uint32_t result = read_mem_u32(Reg[ESP].u);
1272   trace(Callstack_depth+1, "run") << "popping value 0x" << HEXWORD << result << end();
1273   Reg[ESP].u += 4;
1274   trace(Callstack_depth+1, "run") << "incrementing ESP to 0x" << HEXWORD << Reg[ESP].u << end();
1275   assert(Reg[ESP].u < AFTER_STACK);
1276   return result;
1277 }