1 # primitives for emitting traces to a 'trace' stream, and for tests to make assertions on its contents
  2 #
  3 # A trace stream looks like a regular stream:
  4 #   write : int  # index at which writes go
  5 #   read : int  # index that we've read until
  6 #   data : (array byte)  # prefixed by length as usual
  7 # Usually the trace stream will be in a separate segment set aside for the purpose.
  8 #
  9 # primitives for operating on traces (arguments in quotes):
 10 #   - initialize-trace-stream: populates Trace-stream with a new segment of the given 'size'
 11 #   - trace: adds a 'line' to Trace-stream
 12 #   - check-trace-contains: scans from Trace-stream's start for a matching 'line', prints a 'message' to stderr on failure
 13 #   - check-trace-scans-to: scans from Trace-stream's read pointer for a matching 'line', prints a 'message' to stderr on failure
 14 
 15 == data
 16 
 17 Trace-stream:  # (handle stream byte)
 18     0/imm32
 19     # we don't have safe handles (fat pointers) yet
 20 
 21 Trace-segment:
 22     0/imm32/curr
 23     0/imm32/limit
 24 
 25 # Fake trace-stream for tests.
 26 # Also illustrates the layout of the real trace-stream (segment).
 27 _test-trace-stream:  # (ref stream byte)
 28     # current write index
 29     0/imm32
 30     # current read index
 31     0/imm32
 32     # length
 33     8/imm32
 34     # data
 35     00 00 00 00 00 00 00 00  # 8 bytes
 36 
 37 == code
 38 #   instruction                     effective address                                                   register    displacement    immediate
 39 # . op          subop               mod             rm32          base        index         scale       r32
 40 # . 1-3 bytes   3 bits              2 bits          3 bits        3 bits      3 bits        2 bits      2 bits      0/1/2/4 bytes   0/1/2/4 bytes
 41 
 42 # Allocate a new segment for the trace stream, initialize its length, and save its address to Trace-stream.
 43 # The Trace-stream segment will consist of variable-length lines separated by newlines (0x0a)
 44 initialize-trace-stream:  # n : int
 45     # . prologue
 46     55/push-ebp
 47     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
 48     # . save registers
 49     50/push-eax
 50     51/push-ecx
 51     # ecx = n
 52     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .             .           1/r32/ecx   8/disp8         .                 # copy *(ebp+8) to ecx
 53     # Trace-segment = new-segment(n)
 54     # . . push args
 55     68/push  Trace-segment/imm32
 56     51/push-ecx
 57     # . . call
 58     e8/call  new-segment/disp32
 59     # . . discard args
 60     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
 61     # copy Trace-segment->curr to *Trace-stream
 62     8b/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-segment/disp32              # copy *Trace-segment to eax
 63 #?     # watch point to catch Trace-stream leaks
 64 #? $watch-1:
 65     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
 66     # Trace-stream->length = n - 12
 67     # . ecx -= 12
 68     81          5/subop/subtract    3/mod/direct    1/rm32/ecx    .           .             .           .           .               0xc/imm32         # subtract from ecx
 69     # . Trace-stream->length = ecx
 70     89/copy                         1/mod/*+disp8   0/rm32/eax    .           .             .           1/r32/ecx   8/disp8         .                 # copy ecx to *(eax+8)
 71 $initialize-trace-stream:end:
 72     # . restore registers
 73     59/pop-to-ecx
 74     58/pop-to-eax
 75     # . epilogue
 76     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
 77     5d/pop-to-ebp
 78     c3/return
 79 
 80 # Append a string to the given trace stream.
 81 # Silently give up if it's already full. Or truncate the string if there isn't enough room.
 82 trace:  # line : (addr array byte)
 83     # . prologue
 84     55/push-ebp
 85     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
 86     # . save registers
 87     50/push-eax
 88     51/push-ecx
 89     52/push-edx
 90     53/push-ebx
 91     56/push-esi
 92     57/push-edi
 93     # var edi : (addr stream byte) = *Trace-stream
 94     8b/copy                         0/mod/indirect  5/rm32/.disp32            .             .           7/r32/edi   Trace-stream/disp32               # copy *Trace-stream to edi
 95     # esi = line
 96     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         6/r32/esi   8/disp8         .                 # copy *(ebp+8) to esi
 97     # var ecx : int = t->write
 98     8b/copy                         0/mod/indirect  7/rm32/edi    .           .             .           1/r32/ecx   .               .                 # copy *edi to ecx
 99     # var edx : int = t->length
100     8b/copy                         1/mod/*+disp8   7/rm32/edi    .           .             .           2/r32/edx   8/disp8         .                 # copy *(edi+8) to edx
101     # eax = _append-3(&t->data[t->write], &t->data[t->length], line)
102     # . . push line
103     56/push-esi
104     # . . push &t->data[t->length]
105     8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/edi  2/index/edx   .           3/r32/ebx   0xc/disp8       .                 # copy edi+edx+12 to ebx
106     53/push-ebx
107     # . . push &t->data[t->write]
108     8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/edi  1/index/ecx   .           3/r32/ebx   0xc/disp8       .                 # copy edi+ecx+12 to ebx
109     53/push-ebx
110     # . . call
111     e8/call  _append-3/disp32
112     # . . discard args
113     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
114     # if (eax == 0) return
115     3d/compare-eax-and  0/imm32
116     74/jump-if-equal  $trace:end/disp8
117     # t->write += eax
118     01/add                          0/mod/indirect  7/rm32/edi    .           .             .           0/r32/eax   .               .                 # add eax to *edi
119     # refresh ecx = t->write
120     8b/copy                         0/mod/indirect  7/rm32/edi    .           .             .           1/r32/ecx   .               .                 # copy *edi to ecx
121     # eax = _append-3(&t->data[t->write], &t->data[t->length], line)
122     # . . push line
123     68/push  Newline/imm32
124     # . . push &t->data[t->length]
125     8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/edi  2/index/edx   .           3/r32/ebx   0xc/disp8       .                 # copy edi+edx+12 to ebx
126     53/push-ebx
127     # . . push &t->data[t->write]
128     8d/copy-address                 1/mod/*+disp8   4/rm32/sib    7/base/edi  1/index/ecx   .           3/r32/ebx   0xc/disp8       .                 # copy edi+ecx+12 to ebx
129     53/push-ebx
130     # . . call
131     e8/call  _append-3/disp32
132     # . . discard args
133     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
134     # t->write += eax
135     01/add                          0/mod/indirect  7/rm32/edi    .           .             .           0/r32/eax   .               .                 # add eax to *edi
136 $trace:end:
137     # . restore registers
138     5f/pop-to-edi
139     5e/pop-to-esi
140     5b/pop-to-ebx
141     5a/pop-to-edx
142     59/pop-to-ecx
143     58/pop-to-eax
144     # . epilogue
145     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
146     5d/pop-to-ebp
147     c3/return
148 
149 test-trace-single:
150     # push *Trace-stream
151     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
152     # *Trace-stream = _test-trace-stream
153     b8/copy-to-eax  _test-trace-stream/imm32
154     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
155     # clear-trace-stream()
156     e8/call  clear-trace-stream/disp32
157     # trace("Ab")
158     # . . push args
159     68/push  "Ab"/imm32
160     # . . call
161     e8/call  trace/disp32
162     # . . discard args
163     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
164     # check-ints-equal(*_test-trace-stream->data, 41/A 62/b 0a/newline 00, msg)
165     # . . push args
166     68/push  "F - test-trace-single"/imm32
167     68/push  0x0a6241/imm32/Ab-newline
168     # . . push *_test-trace-stream->data
169     b8/copy-to-eax  _test-trace-stream/imm32
170     ff          6/subop/push        1/mod/*+disp8   0/rm32/eax    .           .             .           .           0xc/disp8       .                 # push *(eax+12)
171     # . . call
172     e8/call  check-ints-equal/disp32
173     # . . discard args
174     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
175     # pop into *Trace-stream
176     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
177     # end
178     c3/return
179 
180 test-trace-appends:
181     # push *Trace-stream
182     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
183     # *Trace-stream = _test-trace-stream
184     b8/copy-to-eax  _test-trace-stream/imm32
185     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
186     # clear-trace-stream()
187     e8/call  clear-trace-stream/disp32
188     # trace("C")
189     # . . push args
190     68/push  "C"/imm32
191     # . . call
192     e8/call  trace/disp32
193     # . . discard args
194     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
195     # trace("D")
196     # . . push args
197     68/push  "D"/imm32
198     # . . call
199     e8/call  trace/disp32
200     # . . discard args
201     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
202     # check-ints-equal(*_test-trace-stream->data, 43/C 0a/newline 44/D 0a/newline, msg)
203     # . . push args
204     68/push  "F - test-trace-appends"/imm32
205     68/push  0x0a440a43/imm32/C-newline-D-newline
206     # . . push *_test-trace-stream->data
207     b8/copy-to-eax  _test-trace-stream/imm32
208     ff          6/subop/push        1/mod/*+disp8   0/rm32/eax    .           .             .           .           0xc/disp8       .                 # push *(eax+12)
209     # . . call
210     e8/call  check-ints-equal/disp32
211     # . . discard args
212     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
213     # pop into *Trace-stream
214     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
215     # end
216     c3/return
217 
218 test-trace-empty-line:
219     # push *Trace-stream
220     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
221     # *Trace-stream = _test-trace-stream
222     b8/copy-to-eax  _test-trace-stream/imm32
223     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
224     # clear-trace-stream()
225     e8/call  clear-trace-stream/disp32
226     # trace("")
227     # . . push args
228     68/push  ""/imm32
229     # . . call
230     e8/call  trace/disp32
231     # . . discard args
232     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
233     # check-ints-equal(*_test-trace-stream->data, 0, msg)
234     # . . push args
235     68/push  "F - test-trace-empty-line"/imm32
236     68/push  0/imm32
237     # . . push *_test-trace-stream->data
238     b8/copy-to-eax  _test-trace-stream/imm32
239     ff          6/subop/push        1/mod/*+disp8   0/rm32/eax    .           .             .           .           0xc/disp8       .                 # push *(eax+12)
240     # . . call
241     e8/call  check-ints-equal/disp32
242     # . . discard args
243     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
244     # pop into *Trace-stream
245     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
246     # end
247     c3/return
248 
249 check-trace-contains:  # line : (addr string), msg : (addr string)
250     # . prologue
251     55/push-ebp
252     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
253     # rewind-stream(*Trace-stream)
254     # . . push args
255     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
256     # . . call
257     e8/call  rewind-stream/disp32
258     # . . discard args
259     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
260     # check-trace-scans-to(line, msg)
261     # . . push args
262     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           0xc/disp8       .                 # push *(ebp+12)
263     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           8/disp8         .                 # push *(ebp+8)
264     # . . call
265     e8/call  check-trace-scans-to/disp32
266     # . . discard args
267     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
268 $check-trace-contains:end:
269     # . epilogue
270     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
271     5d/pop-to-ebp
272     c3/return
273 
274 check-trace-scans-to:  # line : (addr string), msg : (addr string)
275     # . prologue
276     55/push-ebp
277     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
278     # . save registers
279     50/push-eax
280     # eax = trace-scan(line)
281     # . . push args
282     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           8/disp8         .                 # push *(ebp+8)
283     # . . call
284     e8/call  trace-scan/disp32
285     # . . discard args
286     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
287     # check-ints-equal(eax, 1, msg)
288     # . . push args
289     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           0xc/disp8       .                 # push *(ebp+12)
290     68/push  1/imm32
291     50/push-eax
292     # . . call
293     e8/call check-ints-equal/disp32
294     # . . discard args
295     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
296 $check-trace-scans-to:end:
297     # . restore registers
298     58/pop-to-eax
299     # . epilogue
300     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
301     5d/pop-to-ebp
302     c3/return
303 
304 # Start scanning from Trace-stream->read for 'line'. If found, update Trace-stream->read and return true.
305 trace-scan:  # line : (addr array byte) -> result/eax : boolean
306     # pseudocode:
307     #   push Trace-stream->read
308     #   while true:
309     #     if Trace-stream->read >= Trace-stream->write
310     #       break
311     #     if next-line-matches?(Trace-stream, line)
312     #       skip-next-line(Trace-stream)
313     #       dump saved copy of Trace-stream->read
314     #       return true
315     #     skip-next-line(Trace-stream)
316     #   pop saved copy of Trace-stream->read
317     #   return false
318     #
319     # . prologue
320     55/push-ebp
321     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
322     # . save registers
323     51/push-ecx
324     56/push-esi
325     # esi = *Trace-stream
326     8b/copy                         0/mod/indirect  5/rm32/.disp32            .             .           6/r32/esi   Trace-stream/disp32               # copy *Trace-stream to esi
327     # ecx = Trace-stream->write
328     8b/copy                         0/mod/indirect  6/rm32/esi    .           .             .           1/r32/ecx                   .                 # copy *esi to ecx
329     # push Trace-stream->read
330     ff          6/subop/push        1/mod/*+disp8   6/rm32/esi    .           .             .           .           4/disp8         .                 # push *(esi+4)
331 $trace-scan:loop:
332     # if (Trace-stream->read >= Trace-stream->write) return false
333     39/compare                      1/mod/*+disp8   6/rm32/esi    .           .             .           1/r32/ecx   4/disp8         .                 # compare ecx with *(esi+4)
334     7d/jump-if-greater-or-equal  $trace-scan:false/disp8
335     # eax = next-line-matches?(Trace-stream, line)
336     # . . push args
337     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           8/disp8         .                 # push *(ebp+8)
338     56/push-esi
339     # . . call
340     e8/call  next-line-matches?/disp32
341     # . . discard args
342     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
343     # if (eax == false) continue
344     3d/compare-eax-and  0/imm32/false
345     74/jump-if-equal  $trace-scan:continue/disp8
346 $trace-scan:true:
347     # skip-next-line(Trace-stream)
348     # . . push args
349     56/push-esi
350     # . . call
351     e8/call  skip-next-line/disp32
352     # . . discard args
353     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
354     # dump saved copy of Trace-stream->read
355     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
356     # return true
357     b8/copy-to-eax  1/imm32/true
358     eb/jump  $trace-scan:end/disp8
359 $trace-scan:continue:
360     # skip-next-line(Trace-stream)
361     # . . push args
362     56/push-esi
363     # . . call
364     e8/call  skip-next-line/disp32
365     # . . discard args
366     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
367     eb/jump  $trace-scan:loop/disp8
368 $trace-scan:false:
369     # restore saved copy of Trace-stream->read
370     8f          0/subop/pop         1/mod/*+disp8   6/rm32/esi    .           .             .           .           4/disp8         .                 # pop to *(esi+4)
371     # return false
372     b8/copy-to-eax  0/imm32/false
373 $trace-scan:end:
374     # . restore registers
375     59/pop-to-ecx
376     # . epilogue
377     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
378     5d/pop-to-ebp
379     c3/return
380 
381 test-trace-scan-first:
382     # push *Trace-stream
383     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
384     # setup
385     # . *Trace-stream = _test-trace-stream
386     b8/copy-to-eax  _test-trace-stream/imm32
387     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
388     # . clear-trace-stream()
389     e8/call  clear-trace-stream/disp32
390     # . trace("Ab")
391     # . . push args
392     68/push  "Ab"/imm32
393     # . . call
394     e8/call  trace/disp32
395     # . . discard args
396     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
397     # eax = trace-scan("Ab")
398     # . . push args
399     68/push  "Ab"/imm32
400     # . . call
401     e8/call  trace-scan/disp32
402     # . . discard args
403     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
404     # check-ints-equal(eax, 1, msg)
405     # . . push args
406     68/push  "F - test-trace-scan-first"/imm32
407     68/push  1/imm32
408     50/push-eax
409     # . . call
410     e8/call check-ints-equal/disp32
411     # . . discard args
412     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
413     # pop into *Trace-stream
414     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
415     # . end
416     c3/return
417 
418 test-trace-scan-skips-lines-until-found:
419     # push *Trace-stream
420     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
421     # setup
422     # . *Trace-stream = _test-trace-stream
423     b8/copy-to-eax  _test-trace-stream/imm32
424     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
425     # . clear-trace-stream()
426     e8/call  clear-trace-stream/disp32
427     # . trace("Ab")
428     # . . push args
429     68/push  "Ab"/imm32
430     # . . call
431     e8/call  trace/disp32
432     # . . discard args
433     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
434     # . trace("cd")
435     # . . push args
436     68/push  "cd"/imm32
437     # . . call
438     e8/call  trace/disp32
439     # . . discard args
440     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
441     # eax = trace-scan("cd")
442     # . . push args
443     68/push  "cd"/imm32
444     # . . call
445     e8/call  trace-scan/disp32
446     # . . discard args
447     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
448     # check-ints-equal(eax, 1, msg)
449     # . . push args
450     68/push  "F - test-trace-scan-skips-lines-until-found"/imm32
451     68/push  1/imm32
452     50/push-eax
453     # . . call
454     e8/call check-ints-equal/disp32
455     # . . discard args
456     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
457     # pop into *Trace-stream
458     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
459     # . end
460     c3/return
461 
462 test-trace-second-scan-starts-where-first-left-off:
463     # push *Trace-stream
464     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
465     # setup
466     # . *Trace-stream = _test-trace-stream
467     b8/copy-to-eax  _test-trace-stream/imm32
468     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
469     # . clear-trace-stream()
470     e8/call  clear-trace-stream/disp32
471     # . trace("Ab")
472     # . . push args
473     68/push  "Ab"/imm32
474     # . . call
475     e8/call  trace/disp32
476     # . . discard args
477     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
478     # . eax = trace-scan("Ab")
479     # . . push args
480     68/push  "Ab"/imm32
481     # . . call
482     e8/call  trace-scan/disp32
483     # . . discard args
484     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
485     # second scan fails
486     # . eax = trace-scan("Ab")
487     # . . push args
488     68/push  "Ab"/imm32
489     # . . call
490     e8/call  trace-scan/disp32
491     # . . discard args
492     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
493     # check-ints-equal(eax, 0, msg)
494     # . . push args
495     68/push  "F - test-trace-second-scan-starts-where-first-left-off"/imm32
496     68/push  0/imm32
497     50/push-eax
498     # . . call
499     e8/call check-ints-equal/disp32
500     # . . discard args
501     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
502     # pop into *Trace-stream
503     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
504     # . end
505     c3/return
506 
507 test-trace-scan-failure-leaves-read-index-untouched:
508     # push *Trace-stream
509     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
510     # setup
511     # . *Trace-stream = _test-trace-stream
512     b8/copy-to-eax  _test-trace-stream/imm32
513     89/copy                         0/mod/indirect  5/rm32/.disp32            .             .           0/r32/eax   Trace-stream/disp32               # copy eax to *Trace-stream
514     # . clear-trace-stream()
515     e8/call  clear-trace-stream/disp32
516     # . trace("Ab")
517     # . . push args
518     68/push  "Ab"/imm32
519     # . . call
520     e8/call  trace/disp32
521     # . . discard args
522     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
523     # . check-ints-equal(_test-trace-stream->read, 0, msg)
524     # . . push args
525     68/push  "F - test-trace-second-scan-starts-where-first-left-off/precondition-failure"/imm32
526     68/push  0/imm32
527     b8/copy-to-eax  _test-trace-stream/imm32
528     ff          6/subop/push        1/mod/*+disp8   0/rm32/eax    .           .             .           .           4/disp8         .                 # push *(eax+4)
529     # . . call
530     e8/call check-ints-equal/disp32
531     # . . discard args
532     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
533     # perform a failing scan
534     # . eax = trace-scan("Ax")
535     # . . push args
536     68/push  "Ax"/imm32
537     # . . call
538     e8/call  trace-scan/disp32
539     # . . discard args
540     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
541     # no change in read index
542     # . check-ints-equal(_test-trace-stream->read, 0, msg)
543     # . . push args
544     68/push  "F - test-trace-second-scan-starts-where-first-left-off"/imm32
545     68/push  0/imm32
546     b8/copy-to-eax  _test-trace-stream/imm32
547     ff          6/subop/push        1/mod/*+disp8   0/rm32/eax    .           .             .           .           4/disp8         .                 # push *(eax+4)
548     # . . call
549     e8/call check-ints-equal/disp32
550     # . . discard args
551     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
552     # pop into *Trace-stream
553     8f          0/subop/pop         0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # pop into *Trace-stream
554     # . end
555     c3/return
556 
557 next-line-matches?:  # t : (addr stream byte), line : (addr array byte) -> result/eax : boolean
558     # pseudocode:
559     #   while true:
560     #     if (currl >= maxl) break
561     #     if (currt >= maxt) return false
562     #     if (*currt != *currl) return false
563     #     ++currt
564     #     ++currl
565     #   return *currt == '\n'
566     #
567     # . prologue
568     55/push-ebp
569     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
570     # . save registers
571     51/push-ecx
572     52/push-edx
573     53/push-ebx
574     56/push-esi
575     57/push-edi
576     # edx = line
577     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         2/r32/edx   0xc/disp8       .                 # copy *(ebp+12) to edx
578     # var currl/esi : (addr byte) = line->data
579     # . esi = line/edx->data
580     8d/copy-address                 1/mod/*+disp8   2/rm32/edx    .           .             .           6/r32/esi   4/disp8         .                 # copy edx+4 to esi
581     # var maxl/ecx : (addr byte) = &line->data[line->size]
582     # . eax = line/edx->size
583     8b/copy                         0/mod/indirect  2/rm32/edx    .           .                         0/r32/eax   .               .                 # copy *edx to eax
584     # . maxl = &line->data[line->size]
585     8d/copy-address                 0/mod/indirect  4/rm32/sib    6/base/esi  0/index/eax   .           1/r32/ecx   .               .                 # copy edx+eax to ecx
586     # edi = t
587     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         7/r32/edi   8/disp8         .                 # copy *(ebp+8) to edi
588     # var ebx : (addr byte) = t->data
589     8d/copy-address                 1/mod/*+disp8   7/rm32/edi    .           .             .           3/r32/ebx   0xc/disp8       .                 # copy edi+12 to ebx
590     # var maxt/edx : (addr byte) = &t->data[t->write]
591     # . eax = t->write
592     8b/copy                         0/mod/indirect  7/rm32/edi    .           .                         0/r32/eax   .               .                 # copy *edi to eax
593     # . maxt = &t->data[t->write]
594     8d/copy-address                 0/mod/indirect  4/rm32/sib    3/base/ebx  0/index/eax   .           2/r32/edx   .               .                 # copy ebx+eax to edx
595     # var currt/edi : (addr byte) = &t->data[t->read]
596     # . eax = t/edi->read
597     8b/copy                         1/mod/*+disp8   7/rm32/edi    .           .                         0/r32/eax   4/disp8         .                 # copy *(edi+4) to eax
598     # . currt = &t->data[t->read]
599     8d/copy-address                 0/mod/indirect  4/rm32/sib    3/base/ebx  0/index/eax   .           7/r32/edi   .               .                 # copy ebx+eax to edi
600 $next-line-matches?:loop:
601     # if (currl >= maxl) break
602     39/compare                      3/mod/direct    6/rm32/esi    .           .             .           1/r32/ecx   .               .                 # compare esi and ecx
603     73/jump-if-greater-or-equal-unsigned  $next-line-matches?:break/disp8
604     # if (currt >= maxt) return false
605     # . eax = false
606     b8/copy-to-eax  0/imm32/false
607     39/compare                      3/mod/direct    7/rm32/edi    .           .             .           2/r32/edx   .               .                 # compare edi and edx
608     73/jump-if-greater-or-equal-unsigned  $next-line-matches?:end/disp8
609     # if (*currt != *currl) return false
610     31/xor                          3/mod/direct    0/rm32/eax    .           .             .           0/r32/eax   .               .                 # clear eax
611     31/xor                          3/mod/direct    3/rm32/eax    .           .             .           3/r32/eax   .               .                 # clear ebx
612     # . eax : byte = *currt
613     8a/copy-byte                    0/mod/indirect  7/rm32/edi    .           .                         0/r32/eax   .               .                 # copy *edi to eax
614     # . ebx : byte = *currl
615     8a/copy-byte                    0/mod/indirect  6/rm32/esi    .           .                         3/r32/ebx   .               .                 # copy *esi to ebx
616     # . eax >= ebx
617     39/compare                      3/mod/direct    0/rm32/eax    .           .             .           3/r32/ebx   .               .                 # compare eax and ebx
618     # . eax = false
619     b8/copy-to-eax  0/imm32/false
620     75/jump-if-not-equal  $next-line-matches?:end/disp8
621     # ++currt
622     47/increment-edi
623     # ++currl
624     46/increment-esi
625     eb/jump  $next-line-matches?:loop/disp8
626 $next-line-matches?:break:
627     # return *currt == '\n'
628     31/xor                          3/mod/direct    0/rm32/eax    .           .             .           0/r32/eax   .               .                 # clear eax
629     # . eax : byte = *currt
630     8a/copy-byte                    0/mod/indirect  7/rm32/edi    .           .                         0/r32/eax   .               .                 # copy *edi to eax
631     3d/compare-eax-and  0xa/imm32/newline
632     # . eax = false
633     b8/copy-to-eax  1/imm32/true
634     74/jump-if-equal  $next-line-matches?:end/disp8
635     b8/copy-to-eax  0/imm32/true
636 $next-line-matches?:end:
637     # . restore registers
638     5f/pop-to-edi
639     5e/pop-to-esi
640     5b/pop-to-ebx
641     5a/pop-to-edx
642     59/pop-to-ecx
643     # . epilogue
644     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
645     5d/pop-to-ebp
646     c3/return
647 
648 test-next-line-matches?-no-match-1:
649     # next line of "ABABA" does not match "blah blah"
650     # . eax = next-line-matches?(_test-stream-line-ABABA, "blah blah")
651     # . . push args
652     68/push  "blah blah"/imm32
653     68/push  _test-stream-line-ABABA/imm32
654     # . . call
655     e8/call  next-line-matches?/disp32
656     # . . discard args
657     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
658     # . check-ints-equal(eax, 0, msg)
659     # . . push args
660     68/push  "F - test-next-line-matches?-no-match-1"/imm32
661     68/push  0/imm32
662     50/push-eax
663     # . . call
664     e8/call  check-ints-equal/disp32
665     # . . discard args
666     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
667     c3/return
668 
669 test-next-line-matches?-no-match-2:
670     # next line of "ABABA" does not match ""
671     # . eax = next-line-matches?(_test-stream-line-ABABA, "")
672     # . . push args
673     68/push  ""/imm32
674     68/push  _test-stream-line-ABABA/imm32
675     # . . call
676     e8/call  next-line-matches?/disp32
677     # . . discard args
678     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
679     # . check-ints-equal(eax, 0, msg)
680     # . . push args
681     68/push  "F - test-next-line-matches?-no-match-2"/imm32
682     68/push  0/imm32
683     50/push-eax
684     # . . call
685     e8/call  check-ints-equal/disp32
686     # . . discard args
687     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
688     c3/return
689 
690 test-next-line-matches?-no-match-3:
691     # next line of "ABABA" does not match  "AA"
692     # . eax = next-line-matches?(_test-stream-line-ABABA, "AA")
693     # . . push args
694     68/push  "AA"/imm32
695     68/push  _test-stream-line-ABABA/imm32
696     # . . call
697     e8/call  next-line-matches?/disp32
698     # . . discard args
699     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
700     # . check-ints-equal(eax, 0, msg)
701     # . . push args
702     68/push  "F - test-next-line-matches?-no-match-3"/imm32
703     68/push  0/imm32
704     50/push-eax
705     # . . call
706     e8/call  check-ints-equal/disp32
707     # . . discard args
708     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
709     c3/return
710 
711 test-next-line-matches?-match:
712     # next line of "ABABA" matches "ABABA"
713     # . eax = next-line-matches?(_test-stream-line-ABABA, "ABABA")
714     # . . push args
715     68/push  "ABABA"/imm32
716     68/push  _test-stream-line-ABABA/imm32
717     # . . call
718     e8/call  next-line-matches?/disp32
719     # . . discard args
720     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
721     # . check-ints-equal(eax, 1, msg)
722     # . . push args
723     68/push  "F - test-next-line-matches?-match"/imm32
724     68/push  1/imm32
725     50/push-eax
726     # . . call
727     e8/call  check-ints-equal/disp32
728     # . . discard args
729     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
730     c3/return
731 
732 # move t->read to _after_ next newline
733 skip-next-line:  # t : (addr stream byte)
734     # pseudocode:
735     #   max = &t->data[t->write]
736     #   i = t->read
737     #   curr = &t->data[t->read]
738     #   while true
739     #     if (curr >= max) break
740     #     ++i
741     #     if (*curr == '\n') break
742     #     ++curr
743     #   t->read = i
744     #
745     # . prologue
746     55/push-ebp
747     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
748     # . save registers
749     50/push-eax
750     51/push-ecx
751     52/push-edx
752     53/push-ebx
753     # ecx = t
754     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         1/r32/ecx   8/disp8         .                 # copy *(ebp+8) to ecx
755     # edx = t->data
756     8d/copy-address                 1/mod/*+disp8   1/rm32/ecx    .           .             .           2/r32/edx   0xc/disp8       .                 # copy ecx+12 to edx
757     # eax = t->write
758     8b/copy                         0/mod/indirect  1/rm32/ecx    .           .             .           0/r32/eax   .               .                 # copy *ecx to eax
759     # var max/ebx : (addr byte) = &t->data[t->write]
760     8d/copy-address                 0/mod/indirect  4/rm32/sib    2/base/edx  0/index/eax   .           3/r32/ebx   .               .                 # copy edx+eax to ebx
761     # eax = t->read
762     8b/copy                         1/mod/*+disp8   1/rm32/ecx    .           .             .           0/r32/eax   4/disp8         .                 # copy *(ecx+4) to edx
763     # var curr/ecx : (addr byte) = &t->data[t->read]
764     8d/copy-address                 0/mod/indirect  4/rm32/sib    2/base/edx  0/index/eax   .           1/r32/ecx   .               .                 # copy edx+eax to ecx
765     # var i/edx : int = t->read
766     89/copy                         3/mod/direct    2/rm32/edx    .           .             .           0/r32/eax   .               .                 # copy eax to edx
767 $skip-next-line:loop:
768     # if (curr >= max) break
769     39/compare                      3/mod/direct    1/rm32/ecx    .           .             .           3/r32/ebx   .               .                 # compare ecx and ebx
770     73/jump-if-greater-or-equal-unsigned  $skip-next-line:end/disp8
771     # ++i
772     42/increment-edx
773     # if (*curr == '\n') break
774     31/xor                          3/mod/direct    0/rm32/eax    .           .             .           0/r32/eax   .               .                 # clear eax
775     8a/copy-byte                    0/mod/indirect  1/rm32/ecx    .           .             .           0/r32/eax   .               .                 # copy *ecx to eax
776     3d/compare-eax-and  0a/imm32/newline
777     74/jump-if-equal  $skip-next-line:end/disp8
778     # ++curr
779     41/increment-ecx
780     # loop
781     eb/jump  $skip-next-line:loop/disp8
782 $skip-next-line:end:
783     # ecx = t
784     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         1/r32/ecx   8/disp8         .                 # copy *(ebp+8) to ecx
785     # t->read = i
786     89/copy                         1/mod/*+disp8   1/rm32/ecx    .           .             .           2/r32/edx   4/disp8         .                 # copy edx to *(ecx+4)
787     # . restore registers
788     5b/pop-to-ebx
789     5a/pop-to-edx
790     59/pop-to-ecx
791     58/pop-to-eax
792     # . epilogue
793     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
794     5d/pop-to-ebp
795     c3/return
796 
797 test-skip-next-line-empty:
798     # skipping next line in empty stream leaves read pointer at 0
799     # . skip-next-line(_test-stream-empty)
800     # . . push args
801     68/push  _test-stream-empty/imm32
802     # . . call
803     e8/call  skip-next-line/disp32
804     # . . discard args
805     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
806     # . check-ints-equal(_test-stream-empty->read, 0, msg)
807     # . . push args
808     68/push  "F - test-skip-next-line-empty"/imm32
809     68/push  0/imm32
810     b8/copy-to-eax  _test-stream-empty/imm32
811     8b/copy                         1/mod/*+disp8   0/rm32/eax    .           .             .           0/r32/eax   4/disp8         .                 # copy *(eax+4) to eax
812     50/push-eax
813     # . . call
814     e8/call  check-ints-equal/disp32
815     # . . discard args
816     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
817     c3/return
818 
819 test-skip-next-line-filled:
820     # skipping next line increments read pointer by length of line + 1 (for newline)
821     # . skip-next-line(_test-stream-filled)
822     # . . push args
823     68/push  _test-stream-filled/imm32
824     # . . call
825     e8/call  skip-next-line/disp32
826     # . . discard args
827     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
828     # . check-ints-equal(_test-stream-filled->read, 5, msg)
829     # . . push args
830     68/push  "F - test-skip-next-line-filled"/imm32
831     68/push  5/imm32
832     b8/copy-to-eax  _test-stream-filled/imm32
833     8b/copy                         1/mod/*+disp8   0/rm32/eax    .           .             .           0/r32/eax   4/disp8         .                 # copy *(eax+4) to eax
834     50/push-eax
835     # . . call
836     e8/call  check-ints-equal/disp32
837     # . . discard args
838     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0xc/imm32         # add to esp
839     c3/return
840 
841 clear-trace-stream:
842     # . prologue
843     55/push-ebp
844     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
845     # clear-stream(*Trace-stream)
846     # . . push args
847     ff          6/subop/push        0/mod/indirect  5/rm32/.disp32            .             .           .           Trace-stream/disp32               # push *Trace-stream
848     # . . call
849     e8/call  clear-stream/disp32
850     # . . discard args
851     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               4/imm32           # add to esp
852 $clear-trace-stream:end:
853     # . epilogue
854     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
855     5d/pop-to-ebp
856     c3/return
857 
858 # - helpers
859 
860 # 3-argument variant of _append
861 _append-3:  # out : (addr byte), outend : (addr byte), s : (addr array byte) -> num_bytes_appended/eax
862     # . prologue
863     55/push-ebp
864     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
865     # . save registers
866     51/push-ecx
867     # eax = _append-4(out, outend, &s->data[0], &s->data[s->length])
868     # . . push &s->data[s->length]
869     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .                         0/r32/eax   0x10/disp8      .                 # copy *(ebp+16) to eax
870     8b/copy                         0/mod/indirect  0/rm32/eax    .           .             .           1/r32/ecx   .               .                 # copy *eax to ecx
871     8d/copy-address                 1/mod/*+disp8   4/rm32/sib    0/base/eax  1/index/ecx   .           1/r32/ecx   4/disp8         .                 # copy eax+ecx+4 to ecx
872     51/push-ecx
873     # . . push &s->data[0]
874     8d/copy-address                 1/mod/*+disp8   0/rm32/eax    .           .             .           1/r32/ecx   4/disp8         .                 # copy eax+4 to ecx
875     51/push-ecx
876     # . . push outend
877     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           0xc/disp8       .                 # push *(ebp+12)
878     # . . push out
879     ff          6/subop/push        1/mod/*+disp8   5/rm32/ebp    .           .             .           .           8/disp8         .                 # push *(ebp+8)
880     # . . call
881     e8/call  _append-4/disp32
882     # . . discard args
883     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               0x10/imm32        # add to esp
884 $_append-3:end:
885     # . restore registers
886     59/pop-to-ecx
887     # . epilogue
888     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
889     5d/pop-to-ebp
890     c3/return
891 
892 # 4-argument variant of _append
893 _append-4:  # out : (addr byte), outend : (addr byte), in : (addr byte), inend : (addr byte) -> num_bytes_appended/eax : int
894     # . prologue
895     55/push-ebp
896     89/copy                         3/mod/direct    5/rm32/ebp    .           .             .           4/r32/esp   .               .                 # copy esp to ebp
897     # . save registers
898     51/push-ecx
899     52/push-edx
900     53/push-ebx
901     56/push-esi
902     57/push-edi
903     # num_bytes_appended = 0
904     b8/copy-to-eax  0/imm32
905     # edi = out
906     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .             .           7/r32/edi   8/disp8         .                 # copy *(ebp+8) to edi
907     # edx = outend
908     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .             .           2/r32/edx   0xc/disp8       .                 # copy *(ebp+12) to edx
909     # esi = in
910     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .             .           6/r32/esi   0x10/disp8      .                 # copy *(ebp+16) to esi
911     # ecx = inend
912     8b/copy                         1/mod/*+disp8   5/rm32/ebp    .           .             .           1/r32/ecx   0x14/disp8      .                 # copy *(ebp+20) to ecx
913 $_append-4:loop:
914     # if (in >= inend) break
915     39/compare                      3/mod/direct    6/rm32/esi    .           .             .           1/r32/ecx   .               .                 # compare esi with ecx
916     73/jump-if-greater-or-equal-unsigned  $_append-4:end/disp8
917     # if (out >= outend) abort  # just to catch test failures fast
918     39/compare                      3/mod/direct    7/rm32/edi    .           .             .           2/r32/edx   .               .                 # compare edi with edx
919     73/jump-if-greater-or-equal-unsigned  $_append-4:abort/disp8
920     # *out = *in
921     8a/copy-byte                    0/mod/indirect  6/rm32/esi    .           .             .           3/r32/BL    .               .                 # copy byte at *esi to BL
922     88/copy-byte                    0/mod/indirect  7/rm32/edi    .           .             .           3/r32/BL    .               .                 # copy byte at BL to *edi
923     # ++num_bytes_appended
924     40/increment-eax
925     # ++in
926     46/increment-esi
927     # ++out
928     47/increment-edi
929     eb/jump  $_append-4:loop/disp8
930 $_append-4:end:
931     # . restore registers
932     5f/pop-to-edi
933     5e/pop-to-esi
934     5b/pop-to-ebx
935     5a/pop-to-edx
936     59/pop-to-ecx
937     # . epilogue
938     89/copy                         3/mod/direct    4/rm32/esp    .           .             .           5/r32/ebp   .               .                 # copy ebp to esp
939     5d/pop-to-ebp
940     c3/return
941 
942 $_append-4:abort:
943     # . _write(2/stderr, error)
944     # . . push args
945     68/push  "stream overflow\n"/imm32
946     68/push  2/imm32/stderr
947     # . . call
948     e8/call  _write/disp32
949     # . . discard args
950     81          0/subop/add         3/mod/direct    4/rm32/esp    .           .             .           .           .               8/imm32           # add to esp
951     # . syscall(exit, 1)
952     bb/copy-to-ebx  1/imm32
953     b8/copy-to-eax  1/imm32/exit
954     cd/syscall  0x80/imm8
955     # never gets here
956 
957 == data
958 
959 _test-stream-line-ABABA:  # (ref stream byte)
960     # write
961     8/imm32
962     # read
963     0/imm32
964     # length
965     8/imm32
966     # data
967     41 42 41 42 41 0a 00 00  # 8 bytes
968 
969 _test-stream-empty:  # (ref stream byte)
970     # write
971     0/imm32
972     # read
973     0/imm32
974     # length
975     8/imm32
976     # data
977     00 00 00 00 00 00 00 00  # 8 bytes
978 
979 _test-stream-filled:  # (ref stream byte)
980     # write
981     8/imm32
982     # read
983     0/imm32
984     # length
985     8/imm32
986     # data
987     41 41 41 41 0a 41 41 41  # 8 bytes
988 
989 # . . vim:nowrap:textwidth=0