# Chessboard program: you type in moves in algebraic notation, and it'll
# display the position after each move.

# recipes are mu's names for functions
recipe main [
  open-console  # take control of screen, keyboard and mouse

  # The chessboard recipe takes keyboard and screen objects as 'ingredients'.
  #
  # In mu it is good form (though not required) to explicitly show the
  # hardware you rely on.
  #
  # The chessboard also returns the same keyboard and screen objects. In mu it
  # is good form to not modify ingredients of a recipe unless they are also
  # results. Here we clearly modify both keyboard and screen, so we return
  # both.
  #
  # Here the console and screen are both 0, which usually indicates real
  # hardware rather than a fake for testing as you'll see below.
  0/screen, 0/console <- chessboard 0/screen, 0/console

  close-console  # cleanup screen, keyboard and mouse
]

## But enough about mu. Here's what it looks like to run the chessboard program.

scenario print-board-and-read-move [
  $close-trace  # administrivia: most scenarios save and check traces, but this one gets too large/slow
  # we'll make the screen really wide because the program currently prints out a long line
  assume-screen 120/width, 20/height
  # initialize keyboard to type in a move
  assume-console [
    type [a2-a4
]
  ]
  run [
    screen:address, console:address <- chessboard screen:address, console:address
    # icon for the cursor
    screen <- print-character screen, 9251/␣
  ]
  screen-should-contain [
  #            1         2         3         4         5         6         7         8         9         10        11
  #  012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789
    .Stupid text-mode chessboard. White pieces in uppercase; black pieces in lowercase. No checking for legal moves.         .
    .                                                                                                                        .
    .8 | r n b q k b n r                                                                                                     .
    .7 | p p p p p p p p                                                                                                     .
    .6 |                                                                                                                     .
    .5 |                                                                                                                     .
    .4 | P                                                                                                                   .
    .3 |                                                                                                                     .
    .2 |   P P P P P P P                                                                                                     .
    .1 | R N B Q K B N R                                                                                                     .
    .  +----------------                                                                                                     .
    .    a b c d e f g h                                                                                                     .
    .                                                                                                                        .
    .Type in your move as <from square>-<to square>. For example: 'a2-a4'. Then press <enter>.                               .
    .                                                                                                                        .
    .Hit 'q' to exit.                                                                                                        .
    .                                                                                                                        .
    .move: ␣                                                                                                                 .
    .                                                                                                                        .
    .                                                                                                                        .
  ]
]

## Here's how 'chessboard' is implemented.

recipe chessboard [
  local-scope
  screen:address <- next-ingredient
  console:address <- next-ingredient
  board:address:array:address:array:character <- initial-position
  # hook up stdin
  stdin:address:channel <- new-channel 10/capacity
  start-running send-keys-to-channel:recipe, console, stdin, screen
  # buffer lines in stdin
  buffered-stdin:address:channel <- new-channel 10/capacity
  start-running buffer-lines:recipe, stdin, buffered-stdin
  {
    msg:address:array:character <- new [Stupid text-mode chessboard. White pieces in uppercase; black pieces in lowercase. No checking for legal moves.
]
    print-string screen, msg
    cursor-to-next-line screen
    print-board screen, board
    cursor-to-next-line screen
    msg <- new [Type in your move as <from square>-<to square>. For example: 'a2-a4'. Then press <enter>.
]
    print-string screen, msg
    cursor-to-next-line screen
    msg <- new [Hit 'q' to exit.
]
    print-string screen, msg
    {
      cursor-to-next-line screen
      msg <- new [move: ]
      print-string screen, msg
      m:address:move, quit:boolean, error:boolean <- read-move buffered-stdin, screen
      break-if quit, +quit:label
      buffered-stdin <- clear-channel buffered-stdin  # cleanup after error. todo: test this?
      loop-if error
    }
    board <- make-move board, m
    clear-screen screen
    loop
  }
  +quit
]

## a board is an array of files, a file is an array of characters (squares)

recipe new-board [
  local-scope
  initial-position:address:array:number <- next-ingredient
  # assert(length(initial-position) == 64)
  len:number <- length *initial-position
  correct-length?:boolean <- equal len, 64
  assert correct-length?, [chessboard had incorrect size]
  # board is an array of pointers to files; file is an array of characters
  board:address:array:address:array:character <- new location:type, 8
  col:number <- copy 0
  {
    done?:boolean <- equal col, 8
    break-if done?
    file:address:address:array:character <- index-address *board, col
    *file <- new-file initial-position, col
    col <- add col, 1
    loop
  }
  reply board
]

recipe new-file [
  local-scope
  position:address:array:number <- next-ingredient
  index:number <- next-ingredient
  index <- multiply index, 8
  result:address:array:character <- new character:type, 8
  row:number <- copy 0
  {
    done?:boolean <- equal row, 8
    break-if done?
    dest:address:character <- index-address *result, row
    *dest <- index *position, index
    row <- add row, 1
    index <- add index, 1
    loop
  }
  reply result
]

recipe print-board [
  local-scope
  screen:address <- next-ingredient
  board:address:array:address:array:character <- next-ingredient
  row:number <- copy 7  # start printing from the top of the board
  # print each row
  {
    done?:boolean <- lesser-than row, 0
    break-if done?
    # print rank number as a legend
    rank:number <- add row, 1
    print-integer screen, rank
    s:address:array:character <- new [ | ]
    print-string screen, s
    # print each square in the row
    col:number <- copy 0
    {
      done?:boolean <- equal col:number, 8
      break-if done?:boolean
      f:address:array:character <- index *board, col
      c:character <- index *f, row
      print-character screen, c
      print-character screen, 32/space
      col <- add col, 1
      loop
    }
    row <- subtract row, 1
    cursor-to-next-line screen
    loop
  }
  # print file letters as legend
  s <- new [  +----------------]
  print-string screen, s
  screen <- cursor-to-next-line screen
  s <- new [    a b c d e f g h]
  screen <- print-string screen, s
  screen <- cursor-to-next-line screen
]

# board:address:array:address:array:character <- initial-position
recipe initial-position [
  local-scope
  # layout in memory (in raster order):
  #   R P _ _ _ _ p r
  #   N P _ _ _ _ p n
  #   B P _ _ _ _ p b
  #   Q P _ _ _ _ p q
  #   K P _ _ _ _ p k
  #   B P _ _ _ _ p B
  #   N P _ _ _ _ p n
  #   R P _ _ _ _ p r
  initial-position:address:array:number <- new-array 82/R, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 114/r, 78/N, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 110/n, 66/B, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 98/b, 81/Q, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 113/q, 75/K, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 107/k, 66/B, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 98/b, 78/N, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 110/n, 82/R, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 114/r
#?       82/R, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 114/r,
#?       78/N, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 110/n,
#?       66/B, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 98/b, 
#?       81/Q, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 113/q,
#?       75/K, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 107/k,
#?       66/B, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 98/b,
#?       78/N, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 110/n,
#?       82/R, 80/P, 32/blank, 32/blank, 32/blank, 32/blank, 112/p, 114/r
  board:address:array:address:array:character <- new-board initial-position
  reply board
]

scenario printing-the-board [
  assume-screen 30/width, 12/height
  run [
    1:address:array:address:array:character/board <- initial-position
    screen:address <- print-board screen:address, 1:address:array:address:array:character/board
  ]
  screen-should-contain [
  #  012345678901234567890123456789
    .8 | r n b q k b n r           .
    .7 | p p p p p p p p           .
    .6 |                           .
    .5 |                           .
    .4 |                           .
    .3 |                           .
    .2 | P P P P P P P P           .
    .1 | R N B Q K B N R           .
    .  +----------------           .
    .    a b c d e f g h           .
    .                              .
    .                              .
  ]
]

## data structure: move

container move [
  # valid range: 0-7
  from-file:number
  from-rank:number
  to-file:number
  to-rank:number
]

# result:address:move, quit?:boolean, error?:boolean <- read-move stdin:address:channel, screen:address
# prints only error messages to screen
recipe read-move [
  local-scope
  stdin:address:channel <- next-ingredient
  screen:address <- next-ingredient
  from-file:number, quit?:boolean, error?:boolean <- read-file stdin, screen
  reply-if quit?, 0/dummy, quit?, error?
  reply-if error?, 0/dummy, quit?, error?
  # construct the move object
  result:address:move <- new move:type
  x:address:number <- get-address *result, from-file:offset
  *x <- copy from-file
  x <- get-address *result, from-rank:offset
  *x, quit?, error? <- read-rank stdin, screen
  reply-if quit?, 0/dummy, quit?, error?
  reply-if error?, 0/dummy, quit?, error?
  error? <- expect-from-channel stdin, 45/dash, screen
  reply-if error?, 0/dummy, 0/quit, error?
  x <- get-address *result, to-file:offset
  *x, quit?, error? <- read-file stdin, screen
  reply-if quit?:boolean, 0/dummy, quit?:boolean, error?:boolean
  reply-if error?:boolean, 0/dummy, quit?:boolean, error?:boolean
  x:address:number <- get-address *result, to-rank:offset
  *x, quit?, error? <- read-rank stdin, screen
  reply-if quit?, 0/dummy, quit?, error?
  reply-if error?, 0/dummy, quit?, error?
  error? <- expect-from-channel stdin, 10/newline, screen
  reply-if error?, 0/dummy, 0/quit, error?
  reply result, quit?, error?
]

# file:number, quit:boolean, error:boolean <- read-file stdin:address:channel, screen:address
# valid values for file: 0-7
recipe read-file [
  local-scope
  stdin:address:channel <- next-ingredient
  screen:address <- next-ingredient
  c:character, stdin <- read stdin
  {
    q-pressed?:boolean <- equal c, 81/Q
    break-unless q-pressed?
    reply 0/dummy, 1/quit, 0/error
  }
  {
    q-pressed? <- equal c, 113/q
    break-unless q-pressed?
    reply 0/dummy, 1/quit, 0/error
  }
  {
    empty-fake-keyboard?:boolean <- equal c, 0/eof
    break-unless empty-fake-keyboard?
    reply 0/dummy, 1/quit, 0/error
  }
  {
    newline?:boolean <- equal c, 10/newline
    break-unless newline?
    error-message:address:array:character <- new [that's not enough]
    print-string screen, error-message
    reply 0/dummy, 0/quit, 1/error
  }
  file:number <- subtract c, 97/a
  # 'a' <= file <= 'h'
  {
    above-min:boolean <- greater-or-equal file, 0
    break-if above-min
    error-message:address:array:character <- new [file too low: ]
    print-string screen, error-message
    print-character screen, c
    cursor-to-next-line screen
    reply 0/dummy, 0/quit, 1/error
  }
  {
    below-max:boolean <- lesser-than file, 8
    break-if below-max
    error-message <- new [file too high: ]
    print-string screen, error-message
    print-character screen, c
    reply 0/dummy, 0/quit, 1/error
  }
  reply file, 0/quit, 0/error
]

# rank:number <- read-rank stdin:address:channel, screen:address
# valid values: 0-7, -1 (quit), -2 (error)
recipe read-rank [
  local-scope
  stdin:address:channel <- next-ingredient
  screen:address <- next-ingredient
  c:character, stdin <- read stdin
  {
    q-pressed?:boolean <- equal c, 8/Q
    break-unless q-pressed?
    reply 0/dummy, 1/quit, 0/error
  }
  {
    q-pressed? <- equal c, 113/q
    break-unless q-pressed?
    reply 0/dummy, 1/quit, 0/error
  }
  {
    newline?:boolean <- equal c, 10  # newline
    break-unless newline?
    error-message:address:array:character <- new [that's not enough]
    print-string screen, error-message
    reply 0/dummy, 0/quit, 1/error
  }
  rank:number <- subtract c, 49/'1'
  # assert'1' <= rank <= '8'
  {
    above-min:boolean <- greater-or-equal rank, 0
    break-if above-min
    error-message <- new [rank too low: ]
    print-string screen, error-message
    print-character screen, c
    reply 0/dummy, 0/quit, 1/error
  }
  {
    below-max:boolean <- lesser-or-equal rank, 7
    break-if below-max
    error-message <- new [rank too high: ]
    print-string screen, error-message
    print-character screen, c
    reply 0/dummy, 0/quit, 1/error
  }
  reply rank, 0/quit, 0/error
]

# read a character from the given channel and check that it's what we expect
# return true on error
recipe expect-from-channel [
  local-scope
  stdin:address:channel <- next-ingredient
  expected:character <- next-ingredient
  screen:address <- next-ingredient
  c:character, stdin <- read stdin
  {
    match?:boolean <- equal c, expected
    break-if match?
    s:address:array:character <- new [expected character not found]
    print-string screen, s
  }
  result:boolean <- not match?
  reply result
]

scenario read-move-blocking [
  assume-screen 20/width, 2/height
  run [
    1:address:channel <- new-channel 2
    2:number/routine <- start-running read-move:recipe, 1:address:channel, screen:address
    # 'read-move' is waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-blocking: routine failed to pause after coming up (before any keys were pressed)]
    # press 'a'
    1:address:channel <- write 1:address:channel, 97/a
    restart 2:number/routine
    # 'read-move' still waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-blocking: routine failed to pause after rank 'a']
    # press '2'
    1:address:channel <- write 1:address:channel, 50/'2'
    restart 2:number/routine
    # 'read-move' still waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-blocking: routine failed to pause after file 'a2']
    # press '-'
    1:address:channel <- write 1:address:channel, 45/'-'
    restart 2:number/routine
    # 'read-move' still waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?/routine-state, [
F read-move-blocking: routine failed to pause after hyphen 'a2-']
    # press 'a'
    1:address:channel <- write 1:address:channel, 97/a
    restart 2:number/routine
    # 'read-move' still waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?/routine-state, [
F read-move-blocking: routine failed to pause after rank 'a2-a']
    # press '4'
    1:address:channel <- write 1:address:channel, 52/'4'
    restart 2:number/routine
    # 'read-move' still waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-blocking: routine failed to pause after file 'a2-a4']
    # press 'newline'
    1:address:channel <- write 1:address:channel, 10  # newline
    restart 2:number/routine
    # 'read-move' now completes
    wait-for-routine 2:number
    3:number <- routine-state 2:number
    4:boolean/completed? <- equal 3:number/routine-state, 1/completed
    assert 4:boolean/completed?, [
F read-move-blocking: routine failed to terminate on newline]
    trace 1, [test], [reached end]
  ]
  trace-should-contain [
    test: reached end
  ]
]

scenario read-move-quit [
  assume-screen 20/width, 2/height
  run [
    1:address:channel <- new-channel 2
    2:number/routine <- start-running read-move:recipe, 1:address:channel, screen:address
    # 'read-move' is waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-quit: routine failed to pause after coming up (before any keys were pressed)]
    # press 'q'
    1:address:channel <- write 1:address:channel, 113/q
    restart 2:number/routine
    # 'read-move' completes
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/completed? <- equal 3:number/routine-state, 1/completed
    assert 4:boolean/completed?, [
F read-move-quit: routine failed to terminate on 'q']
    trace 1, [test], [reached end]
  ]
  trace-should-contain [
    test: reached end
  ]
]

scenario read-move-illegal-file [
  assume-screen 20/width, 2/height
  run [
    1:address:channel <- new-channel 2
    2:number/routine <- start-running read-move:recipe, 1:address:channel, screen:address
    # 'read-move' is waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-file: routine failed to pause after coming up (before any keys were pressed)]
    1:address:channel <- write 1:address:channel, 50/'2'
    restart 2:number/routine
    wait-for-routine 2:number
  ]
  screen-should-contain [
    .file too low: 2     .
    .                    .
  ]
]

scenario read-move-illegal-rank [
  assume-screen 20/width, 2/height
  run [
    1:address:channel <- new-channel 2
    2:number/routine <- start-running read-move:recipe, 1:address:channel, screen:address
    # 'read-move' is waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-file: routine failed to pause after coming up (before any keys were pressed)]
    1:address:channel <- write 1:address:channel, 97/a
    1:address:channel <- write 1:address:channel, 97/a
    restart 2:number/routine
    wait-for-routine 2:number
  ]
  screen-should-contain [
    .rank too high: a    .
    .                    .
  ]
]

scenario read-move-empty [
  assume-screen 20/width, 2/height
  run [
    1:address:channel <- new-channel 2
    2:number/routine <- start-running read-move:recipe, 1:address:channel, screen:address
    # 'read-move' is waiting for input
    wait-for-routine 2:number
    3:number <- routine-state 2:number/id
    4:boolean/waiting? <- equal 3:number/routine-state, 3/waiting
    assert 4:boolean/waiting?, [
F read-move-file: routine failed to pause after coming up (before any keys were pressed)]
    1:address:channel <- write 1:address:channel, 10/newline
    1:address:channel <- write 1:address:channel, 97/a
    restart 2:number/routine
    wait-for-routine 2:number
  ]
  screen-should-contain [
    .that's not enough   .
    .                    .
  ]
]

recipe make-move [
  local-scope
  b:address:array:address:array:character <- next-ingredient
  m:address:move <- next-ingredient
  from-file:number <- get *m, from-file:offset
  from-rank:number <- get *m, from-rank:offset
  to-file:number <- get *m, to-file:offset
  to-rank:number <- get *m, to-rank:offset
  f:address:array:character <- index *b, from-file
  src:address:character/square <- index-address *f, from-rank
  f <- index *b, to-file
  dest:address:character/square <- index-address *f, to-rank
  *dest <- copy *src
  *src <- copy 32/space
  reply b/same-as-ingredient:0
]

scenario making-a-move [
  assume-screen 30/width, 12/height
  run [
    2:address:array:address:array:character/board <- initial-position
    3:address:move <- new move:type
    4:address:number <- get-address *3:address:move, from-file:offset
    *4:address:number <- copy 6/g
    5:address:number <- get-address *3:address:move, from-rank:offset
    *5:address:number <- copy 1/'2'
    6:address:number <- get-address *3:address:move, to-file:offset
    *6:address:number <- copy 6/g
    7:address:number <- get-address *3:address:move, to-rank:offset
    *7:address:number <- copy 3/'4'
    2:address:array:address:array:character/board <- make-move 2:address:array:address:array:character/board, 3:address:move
    screen:address <- print-board screen:address, 2:address:array:address:array:character/board
  ]
  screen-should-contain [
  #  012345678901234567890123456789
    .8 | r n b q k b n r           .
    .7 | p p p p p p p p           .
    .6 |                           .
    .5 |                           .
    .4 |             P             .
    .3 |                           .
    .2 | P P P P P P   P           .
    .1 | R N B Q K B N R           .
    .  +----------------           .
    .    a b c d e f g h           .
    .                              .
  ]
]