# Read a text file containing whitespace-separated pairs of ascii hex bytes # from stdin, and convert them into binary bytes (octets) on stdout. Ignore # comments between '#' and newline. # # To run (from the subx/ directory): # $ ./subx translate *.subx apps/hex.subx -o apps/hex # $ echo '80 81 82 # comment' |./subx run apps/hex |xxd - # Expected output: # 00000000: 8081 82 # # Only hex bytes and comments are permitted. Outside of comments all words # must be exactly 2 characters long and contain only characters [0-9a-f]. No # uppercase hex. == code # instruction effective address register displacement immediate # . op subop mod rm32 base index scale r32 # . 1-3 bytes 3 bits 2 bits 3 bits 3 bits 3 bits 2 bits 2 bits 0/1/2/4 bytes 0/1/2/4 bytes Entry: # run tests if necessary, convert stdin if not #? # for debugging: run a single test #? e8/call test-convert-next-octet-aborts-on-single-hex-byte/disp32 #? 8b/copy 0/mod/indirect 5/rm32/.disp32 . . 3/r32/EBX Num-test-failures/disp32 # copy *Num-test-failures to EBX #? eb/jump $main:end/disp8 # . prolog 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # - if argc > 1 and argv[1] == "test", then return run_tests() # . argc > 1 81 7/subop/compare 1/mod/*+disp8 5/rm32/EBP . . . . 0/disp8 1/imm32 # compare *EBP 7e/jump-if-lesser-or-equal $run-main/disp8 # . argv[1] == "test" # . . push args 68/push "test"/imm32 ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call kernel-string-equal?/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . check result 3d/compare-EAX-and 1/imm32 75/jump-if-not-equal $run-main/disp8 # . run-tests() e8/call run-tests/disp32 8b/copy 0/mod/indirect 5/rm32/.disp32 . . 3/r32/EBX Num-test-failures/disp32 # copy *Num-test-failures to EBX eb/jump $main:end/disp8 $run-main: # - otherwise convert stdin # var ed/EAX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 0/rm32/EAX . . . 4/r32/ESP . . # copy ESP to EAX # configure ed to really exit() # . ed->target = 0 c7 0/subop/copy 0/mod/direct 0/rm32/EAX . . . . . 0/imm32 # copy to *EAX # return convert(Stdin, 1/stdout, 2/stderr, ed) # . . push args 50/push-EAX/ed 68/push Stderr/imm32 68/push Stdout/imm32 68/push Stdin/imm32 # . . call e8/call convert/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0x10/imm32 # add to ESP # . syscall(exit, 0) bb/copy-to-EBX 0/imm32 $main:end: b8/copy-to-EAX 1/imm32/exit cd/syscall 0x80/imm8 # the main entry point convert: # in : (address buffered-file), out : (address buffered-file), err : (address buffered-file), ed : (address exit-descriptor) -> # pseudocode: # while true # EAX = convert-next-octet(in, err, ed) # if (EAX == Eof) break # write-byte(out, AL) # flush(out) # # . prolog 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # . save registers 50/push-EAX $convert:loop: # EAX = convert-next-octet(in, err, ed) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x14/disp8 . # push *(EBP+20) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call convert-next-octet/disp32 # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # if (EAX == Eof) break 3d/compare-EAX-and 0xffffffff/imm32/Eof 74/jump-if-equal $convert:loop-end/disp8 # write-byte(out, AL) # . . push args 50/push-EAX ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) # . . call e8/call write-byte/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # loop eb/jump $convert:loop/disp8 $convert:loop-end: # flush(out) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) # . . call e8/call flush/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP $convert:end: # . restore registers 58/pop-to-EAX # . epilog 89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP 5d/pop-to-EBP c3/return # read bytes from 'in' until a sequence of two lowercase hex (0-9, a-f) bytes # skip spaces and newlines # on '#' skip bytes until newline # raise an error and abort on all other unexpected bytes # return in EAX an _octet_ containing the binary value of the two hex characters # return Eof on reaching end of file convert-next-octet: # in : (address buffered-file), err : (address buffered-file), ed : (address exit-descriptor) -> byte-or-Eof/EAX # pseudocode: # EAX = scan-next-byte(in, err, ed) # if (EAX == Eof) return # ECX = from-hex-char(EAX) # EAX = scan-next-byte(in, err, ed) # if (EAX == Eof) error("partial byte found.") # EAX = from-hex-char(EAX) # EAX = (ECX << 4) | EAX # return # # . prolog 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # . save registers 51/push-ECX # EAX = scan-next-byte(in, err, ed) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call scan-next-byte/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # if (EAX == Eof) return 3d/compare-EAX-and 0xffffffff/imm32/Eof 74/jump-if-equal $convert-next-octet:end/disp8 # EAX = from-hex-char(EAX) e8/call from-hex-char/disp32 # ECX = EAX 89/copy 3/mod/direct 1/rm32/ECX . . . 0/r32/EAX . . # copy EAX to ECX # EAX = scan-next-byte(in, err, ed) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call scan-next-byte/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # if (EAX == Eof) error(ed, err, "partial byte found.") 3d/compare-EAX-and 0xffffffff/imm32/Eof 75/jump-if-not-equal $convert-next-octet:convert/disp8 # . error-byte(ed, err, msg, '.') # reusing error-byte to avoid creating _yet_ another helper # . . push args 68/push 0x2e/imm32/period/dummy 68/push "convert-next-octet: partial byte found"/imm32 ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16) # . . call e8/call error-byte/disp32 # never returns $convert-next-octet:convert: # EAX = from-hex-char(EAX) e8/call from-hex-char/disp32 # EAX = (ECX << 4) | EAX # . ECX <<= 4 c1/shift 4/subop/left 3/mod/direct 1/rm32/ECX . . . . . 4/imm8 # shift ECX left by 4 bits # . EAX |= ECX 09/or 3/mod/direct 0/rm32/EAX . . . 1/r32/ECX . . # EAX = bitwise OR with ECX $convert-next-octet:end: # . restore registers 59/pop-to-ECX # . epilog 89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP 5d/pop-to-EBP c3/return test-convert-next-octet: # - check that the first two bytes of the input are assembled into the resulting octet # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to "abc" # . write(_test-stream, "abc") # . . push args 68/push "abc"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'convert-next-octet' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-convert-next-octet 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = convert-next-octet(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call convert-next-octet/disp32 # registers except ESP may be clobbered at this point # pop args to convert-next-octet # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that convert-next-octet didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-convert-next-octet: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-convert-next-octet:end/disp8 # check-ints-equal(EAX, 0xab, msg) # . . push args 68/push "F - test-convert-next-octet"/imm32 68/push 0xab/imm32/ab 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-convert-next-octet:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-convert-next-octet-handles-Eof: # - check that reaching end of file returns Eof # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # don't initialize '_test-stream' # initialize exit-descriptor 'ed' for the call to 'convert-next-octet' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-convert-next-octet 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = convert-next-octet(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call convert-next-octet/disp32 # registers except ESP may be clobbered at this point # pop args to convert-next-octet # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that convert-next-octet didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-convert-next-octet: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-convert-next-octet-handles-Eof:end/disp8 # check-ints-equal(EAX, Eof, msg) # . . push args 68/push "F - test-convert-next-octet-handles-Eof"/imm32 68/push 0xffffffff/imm32/Eof 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-convert-next-octet-handles-Eof:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-convert-next-octet-aborts-on-single-hex-byte: # - check that a single unaccompanied hex byte aborts # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to "a" # . write(_test-stream, "a") # . . push args 68/push "a"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'convert-next-octet' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-convert-next-octet 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = convert-next-octet(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call convert-next-octet/disp32 # registers except ESP may be clobbered at this point # pop args to convert-next-octet # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that convert-next-octet aborted # . check-ints-equal(ed->value, 2, msg) # . . push args 68/push "F - test-convert-next-octet-aborts-on-single-hex-byte: unexpected abort"/imm32 68/push 2/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-convert-next-octet-aborts-on-single-hex-byte:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return # read whitespace until a hex byte, and return it # return Eof if file ends without finding a hex byte # on '#' skip all bytes until newline # abort on any other byte scan-next-byte: # in : (address buffered-file), err : (address buffered-file), ed : (address exit-descriptor) -> byte-or-Eof/EAX # pseudocode: # while true # EAX = read-byte(in) # if (EAX == Eof) return EAX # if (is-hex-digit?(EAX)) return EAX # if (EAX == ' ' or '\t' or '\n') continue # if (EAX == '#') skip-until-newline(in) # else error-byte(ed, err, "invalid byte: " EAX) # # . prolog 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # . save registers $scan-next-byte:loop: # EAX = read-byte(in) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call read-byte/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # if (EAX == Eof) return EAX 3d/compare-with-EAX 0xffffffff/imm32/Eof 74/jump-if-equal $scan-next-byte:end/disp8 # if (is-hex-digit?(EAX)) return EAX # . save EAX for now 50/push-EAX # . is-hex-digit?(EAX) # . . push args 50/push-EAX # . . call e8/call is-hex-digit?/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . compare with 'false' 3d/compare-with-EAX 0/imm32 # . restore EAX (does not affect flags) 58/pop-to-EAX # . check whether to return 75/jump-if-not-equal $scan-next-byte:end/disp8 $scan-next-byte:check1: # if (EAX == ' ') continue 3d/compare-EAX-and 0x20/imm32/space 74/jump-if-equal $scan-next-byte:loop/disp8 # if (EAX == '\t') continue 3d/compare-EAX-and 9/imm32/tab 74/jump-if-equal $scan-next-byte:loop/disp8 # if (EAX == '\n') continue 3d/compare-EAX-and 0xa/imm32/newline 74/jump-if-equal $scan-next-byte:loop/disp8 $scan-next-byte:check2: # if (EAX == '#') skip-until-newline(in) 3d/compare-with-EAX 0x23/imm32 75/jump-if-not-equal $scan-next-byte:check3/disp8 # . skip-until-newline(in) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call skip-until-newline/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP eb/jump $scan-next-byte:loop/disp8 $scan-next-byte:check3: # otherwise error-byte(ed, err, msg, EAX) # . . push args 50/push-EAX 68/push "scan-next-byte: invalid byte"/imm32 ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12) ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16) # . . call e8/call error-byte/disp32 # never returns $scan-next-byte:end: # . restore registers # . epilog 89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP 5d/pop-to-EBP c3/return test-scan-next-byte: # - check that the first byte of the input is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to "abc" # . write(_test-stream, "abc") # . . push args 68/push "abc"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-skips-whitespace: # - check that the first byte after whitespace is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to input with leading whitespace # . write(_test-stream, text) # . . push args 68/push " abc"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-skips-whitespace: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-skips-whitespace:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte-skips-whitespace"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-skips-whitespace:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-skips-comment: # - check that the first byte after a comment (and newline) is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to input with leading comment # . write(_test-stream, comment) # . . push args 68/push "#x"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, Newline) # . . push args 68/push Newline/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, real text) # . . push args 68/push "ab"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-skips-comment: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-skips-comment:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte-skips-comment"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-skips-comment:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-skips-comment-and-whitespace: # - check that the first byte after a comment and any further whitespace is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to input with leading comment and more whitespace after newline # . write(_test-stream, comment) # . . push args 68/push "#x"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, Newline) # . . push args 68/push Newline/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, real text) # . . push args 68/push " ab"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-skips-comment-and-whitespace: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-skips-comment-and-whitespace:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte-skips-comment-and-whitespace"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-skips-comment-and-whitespace:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-skips-whitespace-and-comment: # - check that the first byte after any whitespace and comments is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to input with leading whitespace and comment # . write(_test-stream, comment) # . . push args 68/push " #x"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, Newline) # . . push args 68/push Newline/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, real text) # . . push args 68/push "ab"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-skips-whitespace-and-comment: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-skips-whitespace-and-comment:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte-skips-whitespace-and-comment"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-skips-whitespace-and-comment:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-reads-final-byte: # - check that the final byte in input is returned # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to input with single character # . write(_test-stream, character) # . . push args 68/push "a"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-reads-final-byte: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-reads-final-byte:end/disp8 # check-ints-equal(EAX, 0x61/a, msg) # . . push args 68/push "F - test-scan-next-byte-reads-final-byte"/imm32 68/push 0x61/imm32/a 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-reads-final-byte:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-handles-Eof: # - check that the right sentinel value is returned when there's no data remaining to be read # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # leave '_test-stream' empty # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte didn't abort # . check-ints-equal(ed->value, 0, msg) # . . push args 68/push "F - test-scan-next-byte-handles-Eof: unexpected abort"/imm32 68/push 0/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # return if abort 81 7/subop/compare 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 0/imm32 # compare *(ECX+4) 75/jump-if-not-equal $test-scan-next-byte-handles-Eof:end/disp8 # check-ints-equal(EAX, Eof, msg) # . . push args 68/push "F - test-scan-next-byte-handles-Eof"/imm32 68/push 0xffffffff/imm32/Eof 50/push-EAX # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-handles-Eof:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return test-scan-next-byte-aborts-on-invalid-byte: # - check that the a bad byte immediately aborts # This test uses exit-descriptors. Use EBP for setting up local variables. 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # clear all streams # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-stream) # . . push args 68/push _test-error-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-error-buffered-file+4) # . . push args b8/copy-to-EAX _test-error-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to "x" # . write(_test-stream, "x") # . . push args 68/push "x"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # initialize exit-descriptor 'ed' for the call to 'scan-next-byte' below # . var ed/ECX : exit-descriptor 81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP 89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX # . tailor-exit-descriptor(ed, 12) # . . push args 68/push 0xc/imm32/nbytes-of-args-for-scan-next-byte 51/push-ECX/ed # . . call e8/call tailor-exit-descriptor/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # EAX = scan-next-byte(_test-buffered-file, _test-error-buffered-file, ed) # . . push args 51/push-ECX/ed 68/push _test-error-buffered-file/imm32 68/push _test-buffered-file/imm32 # . . call e8/call scan-next-byte/disp32 # registers except ESP may be clobbered at this point # pop args to scan-next-byte # . . discard first 2 args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . . restore ed 59/pop-to-ECX # check that scan-next-byte aborted # . check-ints-equal(ed->value, 2, msg) # . . push args 68/push "F - test-scan-next-byte-aborts-on-invalid-byte"/imm32 68/push 2/imm32 # . . push ed->value ff 6/subop/push 1/mod/*+disp8 1/rm32/ECX . . . . 4/disp8 . # push *(ECX+4) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP $test-scan-next-byte-aborts-on-invalid-byte:end: # . epilog # don't restore ESP from EBP; manually reclaim locals 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP 5d/pop-to-EBP c3/return skip-until-newline: # in : (address buffered-file) -> # pseudocode: # push EAX # while true # EAX = read-byte(in) # if (EAX == Eof) break # if (EAX == 0x0a) break # pop EAX # . prolog 55/push-EBP 89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP # . save registers 50/push-EAX $skip-until-newline:loop: # . EAX = read-byte(in) # . . push args ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8) # . . call e8/call read-byte/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . if (EAX == Eof) break 3d/compare-EAX-and 0xffffffff/imm32/Eof 74/jump-if-equal $skip-until-newline:end/disp8 # . if (EAX != 0xa/newline) loop 3d/compare-EAX-and 0xa/imm32/newline 75/jump-if-not-equal $skip-until-newline:loop/disp8 $skip-until-newline:end: # . restore registers 58/pop-to-EAX # . epilog 89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP 5d/pop-to-EBP c3/return test-skip-until-newline: # - check that the read pointer points after the newline # setup # . clear-stream(_test-stream) # . . push args 68/push _test-stream/imm32 # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # . clear-stream(_test-buffered-file+4) # . . push args b8/copy-to-EAX _test-buffered-file/imm32 05/add-to-EAX 4/imm32 50/push-EAX # . . call e8/call clear-stream/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # initialize '_test-stream' to "abc\nde" # . write(_test-stream, "abc") # . . push args 68/push "abc"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, Newline) # . . push args 68/push Newline/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # . write(_test-stream, "de") # . . push args 68/push "de"/imm32 68/push _test-stream/imm32 # . . call e8/call write/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP # skip-until-newline(_test-buffered-file) # . . push args 68/push _test-buffered-file/imm32 # . . call e8/call skip-until-newline/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP # check-ints-equal(_test-buffered-file->read, 4, msg) # . . push args 68/push "F - test-skip-until-newline"/imm32 68/push 4/imm32 b8/copy-to-EAX _test-buffered-file/imm32 ff 6/subop/push 1/mod/*+disp8 0/rm32/EAX . . . . 8/disp8 . # push *(EAX+8) # . . call e8/call check-ints-equal/disp32 # . . discard args 81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP # . end c3/return == data _test-error-stream: # current write index 0/imm32 # current read index 0/imm32 # line 0x80/imm32 # 128 bytes # data (8 lines x 16 bytes/line) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 # a test buffered file for _test-error-stream _test-error-buffered-file: # file descriptor or (address stream) _test-error-stream/imm32 # current write index 0/imm32 # current read index 0/imm32 # length 6/imm32 # data 00 00 00 00 00 00 # 6 bytes # . . vim:nowrap:textwidth=0