From a5c540608c469a2797262facb766e175b932f0e2 Mon Sep 17 00:00:00 2001 From: Andinus Date: Tue, 19 Jan 2021 21:53:16 +0530 Subject: Re-structure for CPAN upload, include a dictionary file bin/octans calls lib/Octans/CLI.rakumod which has the MAIN subroutine. --- lib/Neighbors.rakumod | 53 ---------------------- lib/Octans/CLI.rakumod | 99 ++++++++++++++++++++++++++++++++++++++++++ lib/Octans/Neighbors.rakumod | 53 ++++++++++++++++++++++ lib/Octans/Puzzle.rakumod | 56 ++++++++++++++++++++++++ lib/Octans/RangeSearch.rakumod | 70 +++++++++++++++++++++++++++++ lib/Octans/WordSearch.rakumod | 67 ++++++++++++++++++++++++++++ lib/Puzzle.rakumod | 56 ------------------------ lib/RangeSearch.rakumod | 70 ----------------------------- lib/WordSearch.rakumod | 67 ---------------------------- 9 files changed, 345 insertions(+), 246 deletions(-) delete mode 100644 lib/Neighbors.rakumod create mode 100644 lib/Octans/CLI.rakumod create mode 100644 lib/Octans/Neighbors.rakumod create mode 100644 lib/Octans/Puzzle.rakumod create mode 100644 lib/Octans/RangeSearch.rakumod create mode 100644 lib/Octans/WordSearch.rakumod delete mode 100644 lib/Puzzle.rakumod delete mode 100644 lib/RangeSearch.rakumod delete mode 100644 lib/WordSearch.rakumod (limited to 'lib') diff --git a/lib/Neighbors.rakumod b/lib/Neighbors.rakumod deleted file mode 100644 index 41cb35d..0000000 --- a/lib/Neighbors.rakumod +++ /dev/null @@ -1,53 +0,0 @@ -unit module Neighbors; - -# neighbors returns the neighbors of given index. Neighbors are cached -# in @neighbors array. This way we don't have to compute them -# everytime neighbors subroutine is called for the same position. -sub neighbors ( - @puzzle, Int $y, Int $x --> List -) is export { - # @directions is holding a list of directions we can move in. It's - # used later for neighbors subroutine. - state List @directions = ( - # $y, $x - ( +1, +0 ), # bottom - ( -1, +0 ), # top - ( +0, +1 ), # left - ( +0, -1 ), # right - ); - - # @neighbors holds the neighbors of given position. - state Array @neighbors; - - if @puzzle[$y][$x] { - - # If we've already computed the neighbors then no need to do - # it again. - unless @neighbors[$y][$x] { - my Int $pos-x; - my Int $pos-y; - - # Starting from the intital position of $y, $x we move to - # each direction according to the values specified in - # @directions array. In this case we're just trying to - # move in 4 directions (top, bottom, left & right). - DIRECTION: for @directions -> $direction { - $pos-y = $y + $direction[0]; - $pos-x = $x + $direction[1]; - - # If movement in this direction is out of puzzle grid - # boundary then move on to next direction. - next DIRECTION unless @puzzle[$pos-y][$pos-x]; - - # If neighbors exist in this direction then add them - # to @neighbors[$y][$x] array. - push @neighbors[$y][$x], [$pos-y, $pos-x]; - } - } - } else { - # If it's out of boundary then return no neighbor. - @neighbors[$y][$x] = []; - } - - return @neighbors[$y][$x]; -} diff --git a/lib/Octans/CLI.rakumod b/lib/Octans/CLI.rakumod new file mode 100644 index 0000000..24ef59f --- /dev/null +++ b/lib/Octans/CLI.rakumod @@ -0,0 +1,99 @@ +use Octans::Puzzle; +use Octans::WordSearch; + +proto MAIN (|) is export {unless so @*ARGS {say $*USAGE; exit;}; {*}} +multi sub MAIN(Bool :$version) is hidden-from-USAGE { + say "Octans v" ~ $?DISTRIBUTION.meta; +} + +multi sub MAIN ( + Str $url?, #= url for Algot's crossword + Str :$dict = (%?RESOURCES // + "/usr/share/dict/words").Str, #= dictionary file + Bool :s($sample), #= run the sample puzzle + Bool :v($verbose), #= increase verbosity + Bool :$version, #= print version +) { + # Print usage & exit if both sample & url are not passed. + unless ($sample or $url) { + say $*USAGE; + exit 0; + } + + # @dict holds the sorted dictionary. Only consider words >= 7 + # chars. + my Str @dict = $dict.IO.lines.grep(*.chars >= 7); + + # @puzzle holds the puzzle. + # + # @gray-squares holds the list of indexes of valid starting + # positions in the puzzle. + my (@puzzle, @gray-squares); + + # Set the sample puzzle if requested. + if $sample { + @puzzle = [ + [], + [], + [], + [] + ]; + @gray-squares = [3, 0], [2, 0]; # $y, $x + } + + # Get the puzzle from $url if it's passed. + get-puzzle($url, @puzzle, @gray-squares) with $url; + + if $verbose { + # Don't print path if using the dictionary included with the + # program. + say "Dictionary: ", $dict.Str + unless ($dict.Str + eq %?RESOURCES.Str); + say "Gray squares: ", @gray-squares; + say "Puzzle"; + " $_".say for @puzzle; + } + + # After the solution is found, the path is printed with these + # fancy chars. + my %𝒻𝒶𝓃𝒸𝓎-𝒸𝒽𝒶𝓇𝓈 = ; + + # start-pos block loops over each starting position. + start-pos: for @gray-squares -> $pos { + my DateTime $initial = DateTime.now; + + # gather all the words that word-search finds starting from + # $pos. + for gather word-search( + @dict, @puzzle, $pos[0], $pos[1], + ) -> ( + # word-search returns the word along with @visited which + # holds the list of all grids that were visited when the + # word was found. + $word, @visited + ) { + # Print the word, along with the time taken (if $verbose). + say ($verbose ?? + "\n" ~ $word ~ " [" ~ DateTime.now - $initial ~ "𝑠]" !! + $word); + + # Print the puzzle, highlighting the path. + if $verbose { + for ^@puzzle.elems -> $y { + print " " x 3; + for ^@puzzle[$y].elems -> $x { + print " ", (@visited[$y][$x] ?? + (%𝒻𝒶𝓃𝒸𝓎-𝒸𝒽𝒶𝓇𝓈{@puzzle[$y][$x]} + // @puzzle[$y][$x]) !! + @puzzle[$y][$x] + ); + } + print "\n"; + } + } + } + } +} diff --git a/lib/Octans/Neighbors.rakumod b/lib/Octans/Neighbors.rakumod new file mode 100644 index 0000000..c6f1c00 --- /dev/null +++ b/lib/Octans/Neighbors.rakumod @@ -0,0 +1,53 @@ +unit module Octans::Neighbors; + +# neighbors returns the neighbors of given index. Neighbors are cached +# in @neighbors array. This way we don't have to compute them +# everytime neighbors subroutine is called for the same position. +sub neighbors ( + @puzzle, Int $y, Int $x --> List +) is export { + # @directions is holding a list of directions we can move in. It's + # used later for neighbors subroutine. + state List @directions = ( + # $y, $x + ( +1, +0 ), # bottom + ( -1, +0 ), # top + ( +0, +1 ), # left + ( +0, -1 ), # right + ); + + # @neighbors holds the neighbors of given position. + state Array @neighbors; + + if @puzzle[$y][$x] { + + # If we've already computed the neighbors then no need to do + # it again. + unless @neighbors[$y][$x] { + my Int $pos-x; + my Int $pos-y; + + # Starting from the intital position of $y, $x we move to + # each direction according to the values specified in + # @directions array. In this case we're just trying to + # move in 4 directions (top, bottom, left & right). + DIRECTION: for @directions -> $direction { + $pos-y = $y + $direction[0]; + $pos-x = $x + $direction[1]; + + # If movement in this direction is out of puzzle grid + # boundary then move on to next direction. + next DIRECTION unless @puzzle[$pos-y][$pos-x]; + + # If neighbors exist in this direction then add them + # to @neighbors[$y][$x] array. + push @neighbors[$y][$x], [$pos-y, $pos-x]; + } + } + } else { + # If it's out of boundary then return no neighbor. + @neighbors[$y][$x] = []; + } + + return @neighbors[$y][$x]; +} diff --git a/lib/Octans/Puzzle.rakumod b/lib/Octans/Puzzle.rakumod new file mode 100644 index 0000000..a35c409 --- /dev/null +++ b/lib/Octans/Puzzle.rakumod @@ -0,0 +1,56 @@ +unit module Octans::Puzzle; + +use WWW; + +# get-puzzle returns the @puzzle along with it's @gray-squares. +sub get-puzzle ( + Str $url, + + # @puzzle will hold the puzzle grid. + @puzzle, + + # @gray-squares will hold the position of gray squares. Algot + # marks them with an asterisk ("*") after the character. + @gray-squares +) is export { + # $toot_url will hold the url that we'll call to get the toot data. + my Str $toot_url; + + # User can pass 2 types of links, either it will be the one when they + # view it from their local instance or the one they get from Algot's + # profile. We set $toot_url from it. + if $url.match("web/statuses") -> $match { + $toot_url = $match.replace-with("api/v1/statuses"); + } else { + $toot_url = "https://mastodon.art/api/v1/statuses/" ~ $url.split("/")[*-1]; + } + + # @gray-squares should be empty. + @gray-squares = (); + + # jget just get's the url & decodes the json. We access the + # description field of 1st media attachment. + if (jget($toot_url)[0] ~~ + + # This regex gets the puzzle in $match. + / [[(\w [\*]?) \s*] ** 4] ** 4 $/) -> $match { + + # We have each character of the puzzle stored in $match. It's + # assumed that it'll be a 4x4 grid. + for 0 .. 3 -> $y { + for 0 .. 3 -> $x { + with $match[0][($y * 4) + $x].Str.lc -> $char { + + # If it ends with an asterisk then we push the + # position to @gray-squares. + if $char.ends-with("*") { + @puzzle[$y][$x] = $char.comb[0]; + push @gray-squares, [$y, $x]; + } else { + @puzzle[$y][$x] = $char; + } + } + } + } + } +} diff --git a/lib/Octans/RangeSearch.rakumod b/lib/Octans/RangeSearch.rakumod new file mode 100644 index 0000000..e287d93 --- /dev/null +++ b/lib/Octans/RangeSearch.rakumod @@ -0,0 +1,70 @@ +unit module Octans::RangeSearch; + +# range-starts-with returns a subset of given @dict list that start +# with $str. It should be faster than: +# +# @dict.grep: *.starts-with($str) +# +# @dict should be a sorted list of words. It performs binary lookup on +# the list. +sub range-starts-with ( + @dict, Str $str --> List +) is export { + # $lower, $upper hold the lower and upper index of the range + # respectively. + my Int ($lower, $upper); + + # Lookup the whole dictionary. + my Int ($start, $end) = (0, @dict.end); + + # Loop until we end up on the lower index of range. + while $start < $end { + # Divide the list into 2 parts. + my Int $mid = ($start + $end) div 2; + + # Check if $mid word is le (less than or equal to) $str. If + # true then discard the bottom end of the list, if not then + # discard the top end. + if $str le @dict[$mid].substr(0, $str.chars).lc { + $end = $mid; + } else { + $start = $mid + 1; + } + } + + # Found the lower index. + $lower = $start; + + # Set $end to the end of list but keep $start at the lower index. + $end = @dict.end; + + # Loop until we end up on the upper index of range. + while $start < $end { + # Divide the list into 2 parts. Adds 1 because we have to find + # the upper index in this part. `div' performs Interger + # division, output is floor'ed. + my Int $mid = (($start + $end) div 2) + 1; + + # Check if $mid word is lt (less than) $str. If true then + # discard the bottom end of the list, if not then discard the + # top end. + if $str lt @dict[$mid].substr(0, $str.chars).lc { + $end = $mid - 1; + } else { + $start = $mid; + } + } + + # Found the upper index. + $upper = $end; + + with @dict[$lower..$upper] -> @list { + # Maybe the word doesn't exist in the list, in that case there + # will be a single element in @list. We return an empty list + # unless that single element starts with $str. + if @list.elems == 1 { + return () unless @list[0].starts-with($str); + } + return @list; + } +} diff --git a/lib/Octans/WordSearch.rakumod b/lib/Octans/WordSearch.rakumod new file mode 100644 index 0000000..a1ed2c3 --- /dev/null +++ b/lib/Octans/WordSearch.rakumod @@ -0,0 +1,67 @@ +unit module Octans::WordSearch; + +use Octans::Neighbors; +use Octans::RangeSearch; + +# word-search walks the given grid & tries to find words in the +# dictionary. It walks in Depth-First manner (lookup Depth-First +# search). +sub word-search ( + # @dict holds the dictionary. @puzzle holds the puzzle. + @dict, @puzzle, + + # $y, $x is the position of the current cell, we have to follow + # this path. $str is the string we've looked up until now. If it's + # not passed then assume that we're starting at $y, $x and take + # @puzzle[$y][$x] as the string. + # + # $str should be passed in recursive calls, it's not required when + # $y, $x is the starting position. + Int $y, Int $x, $str? = @puzzle[$y][$x], + + # @visited holds the positions that we've already visited. + @visited? is copy --> List +) is export { + # If @visited was not passed then mark the given cell as visited + # because it's the cell we're starting at. + @visited[$y][$x] = True unless @visited; + + # neighbor block loops over the neighbors of $y, $x. + neighbor: for neighbors(@puzzle, $y, $x).List -> $pos { + # Move on to next neighbor if we've already visited this one. + next neighbor if @visited[$pos[0]][$pos[1]]; + + # Mark this cell as visited but only until we search this + # path. When moving to next neighbor, mark it False. + @visited[$pos[0]][$pos[1]] = True; + + # $word is the string that we're going to lookup in the + # dictionary. + my Str $word = $str ~ @puzzle[$pos[0]][$pos[1]]; + + # range-starts-with returns a list of all words in the + # dictionary that start with $word. + with range-starts-with(@dict, $word) -> @list { + if @list.elems > 0 { + # If $word exist in the dictionary then it should be + # the first element in the list. + take @list[0], @visited if @list[0] eq $word; + + # Continue on this path because there are 1 or more + # elements in @list which means we could find a word. + word-search( + # Don't pass the whole dictionary for next search. + # Words that start with "ab" will always be a + # subset of words that start with "a", so keeping + # this in mind we pass the output of last + # range-starts-with (@list). + @list, @puzzle, $pos[0], $pos[1], $word, @visited + ); + } + } + + # We're done looking up this path, mark this cell as False & + # move on to another neighbor. + @visited[$pos[0]][$pos[1]] = False; + } +} diff --git a/lib/Puzzle.rakumod b/lib/Puzzle.rakumod deleted file mode 100644 index bf4f8c3..0000000 --- a/lib/Puzzle.rakumod +++ /dev/null @@ -1,56 +0,0 @@ -unit module Puzzle; - -use WWW; - -# get-puzzle returns the @puzzle along with it's @gray-squares. -sub get-puzzle ( - Str $url, - - # @puzzle will hold the puzzle grid. - @puzzle, - - # @gray-squares will hold the position of gray squares. Algot - # marks them with an asterisk ("*") after the character. - @gray-squares -) is export { - # $toot_url will hold the url that we'll call to get the toot data. - my Str $toot_url; - - # User can pass 2 types of links, either it will be the one when they - # view it from their local instance or the one they get from Algot's - # profile. We set $toot_url from it. - if $url.match("web/statuses") -> $match { - $toot_url = $match.replace-with("api/v1/statuses"); - } else { - $toot_url = "https://mastodon.art/api/v1/statuses/" ~ $url.split("/")[*-1]; - } - - # @gray-squares should be empty. - @gray-squares = (); - - # jget just get's the url & decodes the json. We access the - # description field of 1st media attachment. - if (jget($toot_url)[0] ~~ - - # This regex gets the puzzle in $match. - / [[(\w [\*]?) \s*] ** 4] ** 4 $/) -> $match { - - # We have each character of the puzzle stored in $match. It's - # assumed that it'll be a 4x4 grid. - for 0 .. 3 -> $y { - for 0 .. 3 -> $x { - with $match[0][($y * 4) + $x].Str.lc -> $char { - - # If it ends with an asterisk then we push the - # position to @gray-squares. - if $char.ends-with("*") { - @puzzle[$y][$x] = $char.comb[0]; - push @gray-squares, [$y, $x]; - } else { - @puzzle[$y][$x] = $char; - } - } - } - } - } -} diff --git a/lib/RangeSearch.rakumod b/lib/RangeSearch.rakumod deleted file mode 100644 index 16e43c1..0000000 --- a/lib/RangeSearch.rakumod +++ /dev/null @@ -1,70 +0,0 @@ -unit module RangeSearch; - -# range-starts-with returns a subset of given @dict list that start -# with $str. It should be faster than: -# -# @dict.grep: *.starts-with($str) -# -# @dict should be a sorted list of words. It performs binary lookup on -# the list. -sub range-starts-with ( - @dict, Str $str --> List -) is export { - # $lower, $upper hold the lower and upper index of the range - # respectively. - my Int ($lower, $upper); - - # Lookup the whole dictionary. - my Int ($start, $end) = (0, @dict.end); - - # Loop until we end up on the lower index of range. - while $start < $end { - # Divide the list into 2 parts. - my Int $mid = ($start + $end) div 2; - - # Check if $mid word is le (less than or equal to) $str. If - # true then discard the bottom end of the list, if not then - # discard the top end. - if $str le @dict[$mid].substr(0, $str.chars).lc { - $end = $mid; - } else { - $start = $mid + 1; - } - } - - # Found the lower index. - $lower = $start; - - # Set $end to the end of list but keep $start at the lower index. - $end = @dict.end; - - # Loop until we end up on the upper index of range. - while $start < $end { - # Divide the list into 2 parts. Adds 1 because we have to find - # the upper index in this part. `div' performs Interger - # division, output is floor'ed. - my Int $mid = (($start + $end) div 2) + 1; - - # Check if $mid word is lt (less than) $str. If true then - # discard the bottom end of the list, if not then discard the - # top end. - if $str lt @dict[$mid].substr(0, $str.chars).lc { - $end = $mid - 1; - } else { - $start = $mid; - } - } - - # Found the upper index. - $upper = $end; - - with @dict[$lower..$upper] -> @list { - # Maybe the word doesn't exist in the list, in that case there - # will be a single element in @list. We return an empty list - # unless that single element starts with $str. - if @list.elems == 1 { - return () unless @list[0].starts-with($str); - } - return @list; - } -} diff --git a/lib/WordSearch.rakumod b/lib/WordSearch.rakumod deleted file mode 100644 index 14d29b8..0000000 --- a/lib/WordSearch.rakumod +++ /dev/null @@ -1,67 +0,0 @@ -unit module WordSearch; - -use Neighbors; -use RangeSearch; - -# word-search walks the given grid & tries to find words in the -# dictionary. It walks in Depth-First manner (lookup Depth-First -# search). -sub word-search ( - # @dict holds the dictionary. @puzzle holds the puzzle. - @dict, @puzzle, - - # $y, $x is the position of the current cell, we have to follow - # this path. $str is the string we've looked up until now. If it's - # not passed then assume that we're starting at $y, $x and take - # @puzzle[$y][$x] as the string. - # - # $str should be passed in recursive calls, it's not required when - # $y, $x is the starting position. - Int $y, Int $x, $str? = @puzzle[$y][$x], - - # @visited holds the positions that we've already visited. - @visited? is copy --> List -) is export { - # If @visited was not passed then mark the given cell as visited - # because it's the cell we're starting at. - @visited[$y][$x] = True unless @visited; - - # neighbor block loops over the neighbors of $y, $x. - neighbor: for neighbors(@puzzle, $y, $x).List -> $pos { - # Move on to next neighbor if we've already visited this one. - next neighbor if @visited[$pos[0]][$pos[1]]; - - # Mark this cell as visited but only until we search this - # path. When moving to next neighbor, mark it False. - @visited[$pos[0]][$pos[1]] = True; - - # $word is the string that we're going to lookup in the - # dictionary. - my Str $word = $str ~ @puzzle[$pos[0]][$pos[1]]; - - # range-starts-with returns a list of all words in the - # dictionary that start with $word. - with range-starts-with(@dict, $word) -> @list { - if @list.elems > 0 { - # If $word exist in the dictionary then it should be - # the first element in the list. - take @list[0], @visited if @list[0] eq $word; - - # Continue on this path because there are 1 or more - # elements in @list which means we could find a word. - word-search( - # Don't pass the whole dictionary for next search. - # Words that start with "ab" will always be a - # subset of words that start with "a", so keeping - # this in mind we pass the output of last - # range-starts-with (@list). - @list, @puzzle, $pos[0], $pos[1], $word, @visited - ); - } - } - - # We're done looking up this path, mark this cell as False & - # move on to another neighbor. - @visited[$pos[0]][$pos[1]] = False; - } -} -- cgit 1.4.1-2-gfad0