\input texinfo
@setfilename dscip.info
@settitle Dead Simple Continuous Integration POSIX

@copying
Dead Simple Continuous Integration POSIX Manual by Charadon
(DSCIP Manual for short.)

To the extent possible under law, the person who associated CC0 with
DSCIP Manual has waived all copyright and related or neighboring rights
to DSCIP Manual.

You should have received a copy of the CC0 legalcode along with this
work.  If not, see <http://creativecommons.org/publicdomain/zero/1.0/>.
@end copying

@contents

@node Top
@top DSCIP Manual

This is the manual for the Dead Simple Continuous Integration POSIX program.

@menu
* Installing::
* Using::
* Quirks::

* Index::
@end menu

@node Installing
@chapter Installing
@cindex Installing
	Details on installing DSCIP onto various systems.
	@node Downloading
	@section Downloading
	@cindex Downloading
		Currently, the upstream repo for DSCIP is located at this
		@url{https://www.opencode.net/charadon/dscip, Git Repo}. If your OS
		doesn't have DSCIP packaged, you can download the @command{setup.sh}
		from the releases page, and use that to install dscip. Alternatively,
		you can clone the git repo into whatever directory you want.
	@node Unix
	@section Unix
		@cindex Installing on Unix
		In this section, Unix refers to systems that are similar in nature to the
		old System V Unix or is POSIX in nature. This would include: Linux, BSD,
		Mac, Haiku, and Illumos.@*@*
		The instructions will pretty much be the same for all systems.

		@node As a Package
		@subsection As a Package
		@cindex Unix: Installing Packaged DSCIP
			If your host OS packaged DSCIP correctly according to 
			Packaging (@xref{Packaging}), these instructions should work.

			@enumerate
			@item
			Run @command{setup-dscip} in the terminal. See @command{setup-dscip
			-h} for more details.
			@item
			Add the new script as a cronjob or daemon. See your OS's
			manual for instructions on how to do so.
			@end enumerate
			
			And that's it! You're ready to go!

		@node Manually
		@subsection Manually
		@cindex Unix: Install Manually
			While not as simple as if it was packaged. The process is still not
			that hard.
			@enumerate
			@item
			Run @command{setup.sh}. See @command{setup.sh -h} for more
			details.
			@item
			Add the new script as a cronjob or daemon. See your OS's manual
			for instructions on how to do so.
			@end enumerate
			And that's it! You're ready to go!

	@node Windows
	@section Windows
	@cindex Installing on Windows
		Windows is a different beast from Unix. So it warrants it's own dedicated
		section.
		@node MSYS2 (Recommended)
		@subsection MSYS2 (Recommended)
		@cindex Windows: Installing on MSYS2
			@enumerate
			@item
			Install @url{https://www.msys2.org, MSYS2} in whatever way you want. I recommend using
			@url{https://scoop.sh, Scoop}.
			@item
			Once MSYS2 is installed, run setup.sh (@command{setup.sh -h} for
			more info.).
			@item
			Next, we'll need to set it up as a service since Windows doesn't
			really have cronjobs. I recommend using @url{https://nssm.cc, NSSM}
			to create a service for Windows.
			@item
			Edit config.sh and set @env{DSCIP_DAEMON} to true, and set
			@env{DSCIP_DAEMON_FORK} to false.
			@item
			Next, create a batch/powershell script to launch MSYS2 to run the
			dscip script. Here's an example batch script:
			@example
set MSYSTEM=MINGW64
"C:\Users\builder.DESKTOP-U8KQJI1\scoop\apps\msys2\current\usr\bin\bash" -l -c "path/to/dscip"
			@end example
			@item
			Next, run @command{nssm install <name of service>} and set follow
			it's instructions. You can also use
			@url{https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/sc-create,
			sc.exe} if you'd rather not use NSSM.
			@item
			Then you just open services.msc and run it, or use @command{nssm
			start name-of-service}, if you went with NSSM.
			
			@end enumerate
	
		@node Only Bash
		@subsection Bash
		@cindex Windows: Installing with only Bash
			The easiest way to get Bash on Windows is to install git, so we'll
			be assuming that path.
			@enumerate
			@item
			Install @url{https://gitforwindows.org/, Git for Windows}, I recommend using @url{https://scoop.sh,
			Scoop}.
			@item
			Once Git is installed, you should be able to run @command{bash} from
			the command prompt or powershell. Once in Bash, run setup.sh
			(@command{setup.sh -h} for more info.) and install dscip.
			@item
			Once installed, you'll need to set up a service for it. I recommend
			using @url{https://nssm.cc, NSSM} for an easier time.
			@item
			Open config.sh and change @env{DSCIP_DAEMON} to true, and set
			@env{DSCIP_DAEMON_FORK} to false.
			@item
			Create a Batch or Powershell script, here's an example batch script:
			@*
			@example
			bash "C:\path\to\dscip"
			@end example
			@item
			Once the script is done being made, you can use NSSM to create the
			service, or
			@url{https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/sc-create,
			sc.exe}.
			@item
			Now just open services.msc or @command{nssm start <name-of-service>}
			to start it.
			@end enumerate
		
	
	@node Packaging
	@section Packaging
	@cindex Packaging
		Packaging is pretty easy, just run @command{make install} and it'll do
		everything for you. You can use environment variables to change where
		certain things go though.
		@enumerate
		@item
		@env{PREFIX}: This specifies where on the system everything will go. By
		default it's /usr/local.
		@item
		@env{BINDIR}: The directory to install setup.sh to. When installed, it
		will change it's name to @command{setup-dscip}.
		@item
		@env{INFODIR}: The directory to install the manual. Default is
		@env{PREFIX}/share/info.
		@end enumerate
		@noindent
		This is the general layout that the Makefile defaults to:
		@example
├── bin
│   └── setup-dscip (setup.sh)
└── share
    ├── charadon
    │   └── dscip
    │       ├── build.sh
    │       ├── config.sh
    │       ├── dscip
    │       ├── failed.sh
    │       ├── post.sh
    │       └── pre.sh
    └── info
        └── dscip.info.gz
		@end example
		@*
		@noindent
		You'll note two things:
		@enumerate
		@item
		@command{update.sh} is not included. This is mainly mean't for non-package
		installs. Such as direct @command{git} clones, or using the
		@command{setup.sh} script on it's own.
		@item
		@env{SCRIPT_DIR} cannot be changed from it's default of
		$PREFIX/share/charadon/dscip. This is because the @command{setup.sh}
		script relies on the scripts being there to symlink to them.
		@end enumerate

	@node Using Templates
	@section Using Templates
	@cindex Using Templates
		Templates are an easy way to quickly get a DSCIP instance up and
		running. Since most developers tend to have all their projects build
		almost the exact same way, you can easily create a git repo with your DSCIP
		scripts and have the setup script copy them over. You can point to the
		directory containing your templates by using the @option{-t} argument with
		setup.sh. You find find an example of templates here at my
		@url{https://www.opencode.net/charadon/my-dscip-templates-v1, Git Repo}
		
	

@node Using
@chapter Using
@cindex Using
	This chapter goes over how to actually use DSCIP.
	@node Basic Variables
	@section Basic Variables
	@cindex Basic Variables
		This section goes over variables that you can safely modify in
		config.sh.
		@subsection DSCIP_GITREPO
		@cindex Basic Variables: DSCIP_GITREPO
			This is the variable that determines what git repo DSCIP clones into
			wrkdir.
		@subsection DSCIP_NAME
		@cindex Basic Variables: DSCIP_NAME
			This variable determines the name of the program that's being build.
			Mostly for use with the @command{post.sh} and @command{failed.sh}
			scripts when publishing artifacts.
		@subsection DSCIP_BRANCH
		@cindex Basic Variables: DSCIP_BRANCH
			This variable tells DSCIP which branch to clone. This is useful if
			you	develop in a branch other than master.
		@subsection DSCIP_DAEMON
		@cindex Basic Variables: DSCIP_DAEMON
			This variable will tell DSCIP to not close, but rather stay open and
			just sleep before re-running itself. Useful for Windows, if you
			want DSCIP to run in shorter time periods than 60 seconds, or use
			special features that your OS's init system gives.
		@subsection DSCIP_DAEMON_FORK
		@cindex Basic Variables: DSCIP_DAEMON_FORK
			This variable tells DSCIP if it should run itself in the background.
			Some init systems prefer one or the other, so consult your OS's
			documentation.
		@subsection DSCIP_SLEEP
		@cindex Basic Variables: DSCIP_SLEEP
			When in daemon mode, this controls how long DSCIP should wait
			between attempted builds before checking for a new commit and
			building if one exists.
		@subsection DSCIP_OUTPUT_TO
		@cindex Basic Variables: DSCIP_OUTPUT_TO
			This variable tells DSCIP where to put logs. By default it puts all
			output into output.txt. This is useful if, for example, you're
			running DSCIP in daemon mode, and need to store logs somewhere else.
	@node Advanced Variables
	@section Advanced Variables
	@cindex Advanced Variables
		These are variables you should only change if you absolutely need to!
		@subsection DSCIP_GITMODE
		@cindex Advanced Variables: DSCIP_GITMODE
			This tells DSCIP to, rather than delete the wrkdir and get a fresh
			clone, to just pull changes. This is really only useful in
			situations where you have limited bandwidth.
		@subsection WORKING_DIRECTORY
		@cindex Advanced Variables: WORKING_DIRECTORY
			This should probably never be changed. The only situation that
			*might* warrant changing it, is in a very restricted environment
			where it *has* to run in a specific place.
		@subsection DSCIP_@{PRE,BUILD,POST,FAILED@}_CMD
		@cindex Advanced Variables: DSCIP_@{PRE,BUILD,POST,FAILED@}_CMD
			These variables tell DSCIP where to find their respective scripts. Like
			WORKING_DIRECTORY, this really shouldn't be changed and is really
			only useful in situations that are very restrictive.
		@subsection DSCIP_DISREGARD_COMMIT_CHECK
		@cindex Advanced Variables: DSCIP_DISREGARD_COMMIT_CHECK
			This variable tells DSCIP to ignore the commit check and just keep
			rebuilding. This is useful for seeing if old/unmaintained software
			will still build on modern systems. But other than that, should be
			left off.
		@subsection DSCIP_AUTO_UPDATE
		@cindex Advanced Variables: DSCIP_AUTO_UPDATE
			This variable tells DSCIP to run @command{update.sh}, and then run a
			checksum on itself. If it's different from when it first launched,
			It'll re-run itself. This is useful for manual installations.

@node Quirks
@chapter Quirks
@cindex Quirks
	This chapter goes over various quirks that have been discovered with DSCIP.
	None so far...
	

@node Index
@unnumbered Index
@printindex cp

@bye
