title: Breaking the Rules: Refining Prototypes Into Products  
author: Darren Bane  
copyright: 2020 Darren Bane, CC BY-SA  

# Abstract

Recommendations for a process to refine prototypes into production-quality code
are made.

*TODO*: Q: re-cast much of this document as Architecture
Decision Records? A: N

# Introduction

The conventional wisdom is that prototypes should be discarded once the lessons
have been learned,
and the final product written again from scratch.
In the spirit of [1]
I argue that improvements in development tools have
invalidated this.

*TODO*: case study

# Previous Work

There is a long history of recommending prototyping as a way to construct
systems.
I would personally recommend [2]
and [3].

*NB*: I am almost certainly re-inventing a SmallTalk wheel.  However I
argue that Lisp's combination of imperative & OO
is an easier sell to industry
whereas pure OO as in SmallTalk (or logic programming as in
Prolog) is still niche.

A closely related are is that of "specification animation",
quickly writing an implementation of some subset of a formal specification in
for example Z or VDM.
Prolog is a common choice for this, but I choose Lisp instead.

However, as stated in the introduction, I differ in
arguing that it is possible to *refine* a prototype into a product.

# Prototyping

The first step is to construct a prototype,
or in modern terminology a "Minimal Viable Product".
These recommendations follow on from [2]
and [4].

The following is probably the most work that makes sense
without earning money.

## Design Decisions

The programming language chosen is a particular style of Common Lisp.
A clean subset of CL is desired,
so cleave as [close to ISLisp](bane.20.cdr15.md) as practical[5].
Reasons for this decision include:

* Contrary to a lot of other languages, Lisp is fairly paradigm-agnostic.
  Imperative, object-oriented and (limited) functional programming is fairly natural.
* The imperative and object-oriented paradigms are commonly taught,
  used in industry,
  and have a small "impedence mismatch" to current hardware.
* The existence of quicklisp.
  Popularity is not really a reason for choosing Common Lisp over ISLisp,
  but slotting into quicklisp *is*.

Detailed implementations, libraries, etc. are as follows:

* The SBCL compiler.
* Avoid multi-threading at this stage,
  event-driven should do the job.
* For simple multi-user,
  use IRCv3, including the bots (nickserv, chanserv), and tilde.chat.

### Dependencies

For the prototyping phase,
you should *really* limit yourself to the ISLisp subset.
If absolutely necessary you can choose some of the libraries mentioned in the "Productisation" section below.

## Coding standards

Even though this is a prototype, attention should be paid to basic craftsmanship.

* Divide the system into packages, using the subset of CL that is
  supported by OpenLisp
* Write one-sentence docstrings for at least each public fun and class
* Use `declare`
  to check the types of parameters in public interfaces (see below).
* Indent all the source code using Emacs.
* Some minimal documentation, at least an overview [README](https://tom.preston-werner.com/2010/08/23/readme-driven-development.html) file
  and man (actually, [mdoc](https://manpages.bsd.lv/toc.html)) pages[7].
* Certain parts of a system justify greater detail for a *complete* specification.
  These are (newly-designed) network protocols and complex persistent data models.
  For new protocols, use JSON-RPC as a base and follow the documentation style of LSP.
  Data models should be documented as commented SQL DDL.

### Run-time type-checking

As stated above,
`declare` should be used for simple run-time type-checking of public functions.
For example, the following:

```lisp
(defun f (x)
  (declare (fixnum x))
  (the fixnum (+ x 1)))
```

# Refinement to Production-Quality

First, software at the level of the previous section is quite usable.
It should be confirmed that further improvement is, in fact, required.
If so, I argue that there is a repeatable procedure to improve the quality of a
(reasonably well-written) prototype to a releaseable product.

First, ensure that the surrounding infrastructure is in place:

* Configuration management. The prototype should already have been checked into git.
* Build. Write an ASDF description, and install as a local quicklisp package.
* Test.
  Write FiveAM
  test cases.
  Extend the simple run-time type-checking to contracts where possible.
* Track. Start using a defect tracking system.

Then, the following code & documentation improvements should be made:

* Document the system more exhaustively
* Can use more of quicklisp, e.g. the trivial-\* libraries
* Can multi-thread to take advantage of all cores
* Port to platform.sh? Modern WWW stacks are extremely complex, it would be great to do without.

Since we have a working prototype,
it may make sense to write the documentation (and contracts, and tests) "bottom-up":

1. Contracts, static analysis
2. Test cases
3. Module interface specs
4. Module guide, uses hierarchy
5. Task hierarchy
6. System requirements

## Documentation Details

Depend only on GFM,
in the same spirit as the software.
The use of tools like
nw2md and Pandoc should be minised.
PlantUML *should* be used where it can replace ad-hoc text.

Documents should be stored under git in a "doc" subdirectory of the project.

I think it is a good idea to keep the separation between library and UI code
when using ltk.

The following can be added as sections to the README:

* Uses hierarchy (but at a module level of granularity)
* Task hierarchy

And a proper software requirements spec should be written filling in any blanks that the man pages leave.  
The specification of input and output variables is best left at the level of tables and Basic English again.

### Library

This was the subject of [4].
The output artifacts are a module guide an set of module interface specs.
However, some of this documentation is better in the source code:

* The summary of functions should be taken care of by having the public functions and classes commented.
* The formal requirement for function behaviour can be done with
  tables with [Basic English](https://en.wikipedia.org/wiki/Basic_English).
* Although full design-by-contract may be out of reach
  a poor-man's version can be used with public functions following a pattern.
  This can also do some of the formal requirements.

```lisp
(defun f (x)
  (declare (fixnum x))
  (assert (precondition x))
  (let ((res (+ x 1)))
    (assert (postcondition res))
    (the fixnum res)))
```

`lisp-critic` can be used to perform static analysis of the codebase.
But it's not worth writing custom rules.

### UI

ltk is great for local GUIs.
However, a product may require HTMX and the platform.sh stack.
Note that I prefer HTMX & ReST (following Fielding) to single-page applications
(outside the very specific case of drawing on a canvas using ParenScript).

## Dependencies

For productisation you may want to add more features.

Although the official ANSI standard is moribund,
quasi-standard libaries are recommended on the
[awesome list](https://github.com/CodyReichert/awesome-cl),
or [portability layers](http://portability.cl/).
Usage should be limited as follows,
in order of preference.
The language/library split isn't as clear in CL as in some other languages,
but use your judgement.

* For "language" functionality, "[Portability layers](http://portability.cl/)" from that list
* For "library" functionality, any "stars" from the [Awesome-CL](https://github.com/CodyReichert/awesome-cl) list
* Any of the `trivial-` libraries from that list.
* Any other `trivial-` libraries available in Quicklisp.
* Other libraries available in Quicklisp.

The `trivial-` libraries may be *forked* and maintained locally.

For example:
* ltk for the view layer.
* For IRC,
  use trivial-irc.

## Testing

Unit (FiveAM) tests grow in parallel with the module interface specs.
Property-based testing would be nice here, but there doesn't seem to be a readily-available library.
System tests grow in parallel with the requirements spec.
It's ok for system tests to use the same interfaces as the ltk code.
All tests should be automated,
except possibly for the UI/view layer.
Q: These scripts could be generated from a literate test plan? A: yes, probably one of the few places to use nw2md.

As much of the testing work should be pushed "back" in the V model to contracts for the functions,
following the pattern above.

# Conclusion

A method for developing software from an incomplete understanding of the requirements is given.
It is hoped that this is more effective than most of what is currently-used.

# References

[1]Kent Beck, Extreme Programming Explained (1999).  
[2]David  Robertson and Jaume Agustí, Software Blueprints: Lightweight Uses of Logic in Conceptual Modelling, Addison Wesley Longman (1999).  
[3]Kent Pitman, Accelerating Hindsight: Lisp as a Vehicle for Rapid Prototyping (1994).  
[4]Darren Bane, Design and Documentation of the Kernel of a Set of Tools for Working With Tabular Mathematical Expressions, University of Limerick, Ireland (19 Jul 2008).  
[5]Darren Bane, An ISLisp-like subset of ANSI Common Lisp, Ireland (21 Aug 2020).  
[7]Kristaps Dzonsons, Practical UNIX Manuals. available: https://manpages.bsd.lv/toc.html [accessed 9 Oct 2020].