/*
* Lynx - Hypertext navigation system
*
* (c) Copyright 1992, 1993, 1994 University of Kansas
* 1995, 1996: GNU General Public License
*/
/*******************************************************************
* There are three sections to this document
* Section 1. Things you MUST change or verify
* Section 1a) VMS specific things
* Section 1b) UNIX specific things
* Section 1c) ALL Platforms
*
* Section 2. Things you should probably check!
*
* Section 3. Things you should only change after you have a good
* understanding of the program!
*
*/
#ifndef USERDEFS_H
#define USERDEFS_H
/*******************************************************************
* Things you must change
* Section 1.
*/
/*******************************************************************
* Things you must change VMS specific
* Section 1a).
*/
#ifdef VMS
/**************************
* TEMP_SPACE is where Lynx temporary cache files will be placed.
* Temporary files are removed automatically as long as nothing
* goes terribly wrong :)
* This definition can be overridden at run time by defining a
* "LYNX_TEMP_SPACE" VMS logical.
*/
#define TEMP_SPACE "sys$scratch:"
/**************************
* LYNX_CFG_FILE is the location and name of the default lynx
* global configuration file. It is sought and processed at
* startup of Lynx, followed by a seek and processing of a
* personal RC file (.lynxrc in the user's HOME directory,
* created if the user saves values in the 'o'ptions menu).
* You also can define the location and name of the global
* configuration file via a VMS logical, "LYNX_CFG", which
* will override the "LYNX_CFG_FILE" definition here. SYS$LOGIN:
* can be used as the device in either or both definitions if
* you want lynx.cfg treated as a personal configuration file.
* You also can use Unix syntax with a '~' for a subdirectory
* of the login directory, (e.g., ~/lynx/lynx.cfg).
* The -cfg command line switch will override these definitions.
* You can pass the compilation default via build.com or descrip.mms.
*
* Note that some implementations of telnet allow passing of
* environment variables, which might be used by unscrupulous
* people to modify the environment in anonymous accounts. When
* making Lynx and Web access publically available via anonymous
* accounts intended to run Lynx captively, be sure the wrapper
* uses the -cfg switch and specifies the startfile, rather than
* relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables.
*
* Note that any SUFFIX or VIEWER mappings in the configuration
* file will be overidden by any suffix or viewer mappings
* that are established as defaults in src/HTInit.c. You can
* override the src/HTInit.c defaults via the mime.types and
* mailcap files (see the examples in the samples directory).
*/
#ifndef LYNX_CFG_FILE
#define LYNX_CFG_FILE "Lynx_Dir:lynx.cfg"
#endif /* LYNX_CFG_FILE */
/**************************
* The EXTENSION_MAP file allows you to map file suffix's to
* mime types.
* These global and personal files override anything in
* lynx.cfg or src/HTInit.c
*/
#define GLOBAL_EXTENSION_MAP "Lynx_Dir:mime.types"
#define PERSONAL_EXTENSION_MAP "mime.types"
/**************************
* The MAILCAP file allows you to map file MIME types to
* external viewers.
* These global and personal files override anything in
* lynx.cfg or src/HTInit.c
*/
#define GLOBAL_MAILCAP "Lynx_Dir:mailcap"
#define PERSONAL_MAILCAP ".mailcap"
/**************************
* XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c
* for viewing image content types when the DECW$DISPLAY logical
* is set. Make it the foreign command for your system's X image
* viewer (commonly, "xv"). Make it "exit" or something like that
* if you don't have one. It can be anything that will handle GIF,
* TIFF and other popular image formats. Freeware ports of xv for
* VMS are available in the ftp://ftp.wku.edu/vms/unsupported and
* http://www.openvms.digital.com/cd/XV310A/ subdirectories. You
* must also have a "%s" for the filename. The default defined
* here can be overridden in lynx.cfg, or via the global or personal
* mailcap files.
*/
#define XLOADIMAGE_COMMAND "xv %s"
/**************************
* The full path and name of the standard VMS "mail" command.
*
* The mail command will be spawned as a subprocess of lynx
* and used to send replies and error messages. It must be
* defined here, and can be changed in lynx.cfg.
* SYSTEM_MAIL must be able to accept a subject line through
* the use of the /subject="SUBJECT" option.
* If your mailer uses another syntax, some hacking of the
* mailmsg() and reply_by_mail() functions in LYMail.c may
* be required.
*/
#define SYSTEM_MAIL "mail"
/*************************
* below is the argument for an sprintf command that will add
* "IN%""ADDRESS""" to the Internet mail address given by the user.
* It is structured for PMDF's IN%"INTERNET_ADDRESS" scheme. The %s
* is replaced with the address given by the user. If you are using
* a different Internet mail transport, change the IN appropriately
* (e.g., to SMTP, MX, or WINS), here or in lynx.cfg.
*/
#define MAIL_ADRS "\"IN%%\"\"%s\"\"\""
/*********************************
* On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for
* use as the Directory/File Manager (sources, objects, or executables are
* available from ftp://narnia.memst.edu/). CSWING_PATH should be defined
* here or in lynx.cfg to your foreign command for CSwing, with any
* regulatory switches you want included. If not defined, or defined as
* a zero-length string ("") or "none" (case-insensitive), the support
* will be disabled. It will also be disabled if the -nobrowse or
* -selective switches are used, or if the file_url restriction is set.
*
* When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke
* CSwing, normally with the current default directory as an argument to
* position the user on that node of the directory tree. However, if the
* current document is a local directory listing, or a local file and not
* one of the temporary menu or list files, the associated directory will
* be passed as an argument, to position the user on that node of the tree.
*/
/* #define CSWING_PATH "swing" */
/*********************************
* If USE_FIXED_RECORDS is set to TRUE here and/or in lynx.cfg, Lynx will
* convert 'd'ownloaded binary files to FIXED 512 record format before saving
* them to disk or acting on a DOWNLOADER option. If set to FALSE, the
* headers of such files will indicate that they are Stream_LF with Implied
* Carriage Control, which is incorrect, and can cause downloading software
* to get confused and unhappy. If you do set it FALSE, you can use the
* FIXED512.COM command file, which is included in this distribution, to do
* the conversion externally.
*/
#define USE_FIXED_RECORDS TRUE /* convert binaries to FIXED 512 */
/********************************
* If NO_ANONYMOUS_EMAIL is defined, Lynx will not offer to insert X-From
* and X_Personal_Name lines in the body of email messages. On VMS, the
* actual From and Personal Name (if defined for the account) headers always
* are those of the account running the Lynx image. If the account is not
* the one to which the recipient should reply, you can indicate the alternate
* address and personal name via the X-From and X_Personal_Name entries, but
* the recipient must explicitly send the reply to the X_From address, rather
* than using the VMS REPLY command (which will use the actual From address).
*
* This symbol constant might be defined on Unix for security reasons that
* don't apply on VMS. There is no security reason for defining this on VMS,
* but if you have no anonymous accounts (i.e., the From always will point to
* the actual user's email address, you can define it to avoid the bother of
* X-From and X_Personal_Name offers.
*/
/*#define NO_ANONYMOUS_EMAIL TRUE */
/*******************************************************************
* Things you must change UNIX specific
* Section 1b).
*/
#else /* UNIX */
/**************************
* LYNX_CFG_FILE is the location and name of the default lynx
* global configuration file. It is sought and processed at
* startup of Lynx, followed by a seek and processing of a
* personal RC file (.lynxrc in the user's HOME directory,
* created if the user saves values in the 'o'ptions menu).
* You also can define the location and name of the global
* configuration file via an environment variable, "LYNX_CFG",
* which will override the "LYNX_CFG_FILE" definition here.
* You can use '~' in either or both definitions if you want
* lynx.cfg treated as a personal configuration file. The
* -cfg command line switch will override these definitions.
* You can pass the compilation default via the Makefile.
*
* Note that many implementations of telnetd allow passing of
* environment variables, which might be used by unscrupulous
* people to modify the environment in anonymous accounts. When
* making Lynx and Web access publically available via anonymous
* accounts intended to run Lynx captively, be sure the wrapper
* uses the -cfg switch and specifies the startfile, rather than
* relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables.
*
* Note that any SUFFIX or VIEWER mappings in the configuration
* file will be overidden by any suffix or viewer mappings
* that are established as defaults in src/HTInit.c. You can
* override the src/HTInit.c defaults via the mime.types and
* mailcap files (see the examples in the samples directory).
*/
#ifndef LYNX_CFG_FILE
#define LYNX_CFG_FILE "/usr/local/lib/lynx.cfg"
#endif /* LYNX_CFG_FILE */
/**************************
* The EXTENSION_MAP file allows you to map file suffix's to
* mime types.
* These global and personal files override anything in
* lynx.cfg or src/HTInit.c
*/
#define GLOBAL_EXTENSION_MAP "/usr/local/lib/mosaic/mime.types"
#define PERSONAL_EXTENSION_MAP ".mime.types"
/**************************
* The MAILCAP file allows you to map file MIME types to
* external viewers.
* These global and personal files override anything in
* lynx.cfg or src/HTInit.c
*/
#define GLOBAL_MAILCAP "/usr/local/lib/mosaic/mailcap"
#define PERSONAL_MAILCAP ".mailcap"
/**************************
* the full path and name of the telnet command
*/
#define TELNET_COMMAND "telnet"
/**************************
* the full path and name of the tn3270 command
*/
#define TN3270_COMMAND "tn3270"
/**************************
* the full path and name of the rlogin command
*/
#define RLOGIN_COMMAND "rlogin"
/**************************
* XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for
* viewing image content types when the DISPLAY environment variable
* is set. Make it the full path and name of the xli (also known as
* xloadimage or xview) command, or other image viewer. Put 'echo' or
* something like it here if you don't have a suitable viewer. It can
* be anything that will handle GIF, TIFF and other popular image formats
* (xli does). The freeware distribution of xli is available in the
* ftp://ftp.x.org/contrib/ subdirectory. The shareware, xv, also is
* suitable. You must also have a "%s" for the filename; "&" for
* background is optional. The default defined here can be overridden
* in lynx.cfg, or via the global or personal mailcap files. Note that
* open is used as the default for NeXT, instead of the XLOADIMAGE_COMMAND
* definition.
*/
#define XLOADIMAGE_COMMAND "xli %s &"
/**************************
* For UNIX systems this should be sendmail
* sendmail should be in /usr/lib
*
* You definitely want sendmail, not mail or elm or something else,
* except in the case where MMDF is your mail agent.
* For MMDF you should use submit (SCO)
*
* SYSTEM_MAIL must be defined here. You can change it in lynx.cfg.
*
* If you do not use the recommended mailers, some hacking of
* the mailmsg() and reply_by_mail() functions in LYMail.c, or
* interposition of a script, may be required.
*/
#ifdef MMDF
#define SYSTEM_MAIL "/usr/mmdf/bin/submit"
#else
#if defined(__FreeBSD__) || defined(__NetBSD__) || defined(__bsdi__)
#define SYSTEM_MAIL "/usr/sbin/sendmail"
#else /* everthing else: */
#define SYSTEM_MAIL "/usr/lib/sendmail"
#endif /* __FreeBSD || __NetBSD__ || __bsdi__ */
#endif /* MMDF */
/**************************
* A place to put temporary files, it's almost always "/tmp/" on
* UNIX systems
* This definition can be overridden at run time by setting a
* "LYNX_TEMP_SPACE" environment symbol.
*/
#define TEMP_SPACE "/tmp/"
/********************************
* Don't let the user enter his/hers email address when sending a message.
* Anonymous mail makes it far too easy for a user to spoof someone elses
* email address.
* This requires that your mailer agent put in the From: field for you.
* The default should be to uncomment this line but there probably are too
* many mail agents out there that won't do the right thing if there is no
* From: line.
*/
/* #define NO_ANONYMOUS_EMAIL TRUE */
/********************************
* LIST_FORMAT defines the display for local files when LONG_LIST
* is defined in the Makefile. The default set here can be changed
* in lynx.cfg.
*
* The percent items in the list are interpreted as follows:
*
* %p Unix-style permission bits
* %l link count
* %o owner of file
* %g group of file
* %d date of last modification
* %a anchor pointing to file or directory
* %A as above but don't show symbolic links
* %k size of file in Kilobytes
* %K as above but omit size for directories
* %s size of file in bytes
*
* Anything between the percent and the letter is passed on to sprintf.
* A double percent yields a literal percent on output. Other characters
* are passed through literally.
*
* If you want only the filename: " %a"
*
* If you want a brief output: " %4K %-12.12d %a"
*
* For the Unix "ls -l" format: " %p %4l %-8.8o %-8.8g %7s %-12.12d %a"
*/
#define LIST_FORMAT " %p %4l %-8.8o %-8.8g %7s %-12.12d %a"
#endif /* VMS OR UNIX */
/*************************************************************
* Section 1c) Every platform must change or verify these
*
*/
/*****************************
* STARTFILE is the default file if none is specified in lynx.cfg,
* on the command line, or via a WWW_HOME environment variable.
*
* note: STARTFILE must be a URL. See the Lynx online help for more
* information on URLs
*/
#define STARTFILE "http://lynx.browser.org/"
/*****************************
* HELPFILE must be defined as a URL and must have a
* complete path if local:
* file://localhost/PATH_TO/lynx_help/lynx_help_main.html
* Replace PATH_TO with the path to the lynx_help subdirectory
* for this distribution (use SHELL syntax including the device
* on VMS systems).
* The default HELPFILE is:
* http://www.crl.com/~subir/lynx/lynx_help/lynx_help_main.html
* This should be changed here or in lynx.cfg to the local path.
*/
#define HELPFILE "http://www.crl.com/~subir/lynx/lynx_help/lynx_help_main.html"
/* #define HELPFILE "file://localhost/PATH_TO/lynx_help/lynx_help_main.html" */
/*****************************
* DEFAULT_INDEX_FILE is the default file retrieved when the
* user presses the 'I' key when viewing any document.
* An index to your CWIS can be placed here or a document containing
* pointers to lots of interesting places on the web.
*/
#define DEFAULT_INDEX_FILE "http://www.ncsa.uiuc.edu/SDG/Software/Mosaic/MetaIndex.html"
/*******************************
* If GOTOBUFFER is set to TRUE here or in lynx.cfg the last entered
* goto URL, if any, will be offered as a default for reuse or editing
* when the 'g'oto command is entered. All previously used goto URLs
* can be accessed for reuse or editing via a circular buffer invoked
* with the Up-Arrow or Down-Arrow keys after entering the 'g'oto
* command, whether or not a default is offered.
*/
#define GOTOBUFFER FALSE
/*****************************
* JUMPFILE is the default local file checked for shortcut URLs when
* the user presses the 'J' (JUMP) key. The user will be prompted for
* a shortcut entry (analogously to 'g'oto), and can enter one
* or use '?' for a list of the shortcuts with associated links to
* their actual URLs. See the sample jumps files in the samples
* subdirectory. Make sure your jumps file includes a '?' shortcut
* for a file://localhost URL to itself:
*
* ?This Shortcut List
*
* If not defined here or in lynx.cfg, the JUMP command will invoke
* the NO_JUMPFILE statusline message (see LYMessages_en.h). The prompt
* associated with the default jumps file is defined as JUMP_PROMPT in
* LYMessages_en.h and can be modified in lynx.cfg. Additional, alternate
* jumps files can be defined and mapped to keystrokes, and alternate
* prompts can be set for them, in lynx.cfg, but at least one default
* jumps file and associated prompt should be established before adding
* others.
*
* On VMS, use Unix SHELL syntax (including a lead slash) to define it.
*
* Do not include "file://localhost" in the definition.
*/
/* #define JUMPFILE "/Lynx_Dir/jumps.html" */
/*******************************
* If JUMPBUFFER is set to TRUE here or in lynx.cfg the last entered
* jump shortcut, if any, will be offered as a default for reuse or
* editing when the JUMP command is entered. All previously used
* shortcuts can be accessed for reuse or editing via a circular buffer
* invoked with the Up-Arrow or Down-Arrow keys after entering the JUMP
* command, whether or not a default is offered. If you have multiple
* jumps files and corresponding key mappings, each will have its own
* circular buffer.
*/
#define JUMPBUFFER FALSE
/********************************
* If PERMIT_GOTO_FROM_JUMP is defined, then a : or / in a jump target
* will be treated as a full or partial URL (to be resolved versus the
* startfile), and will be handled analogously to a 'g'oto command.
* Such "random URLs" will be entered in the circular buffer for goto
* URLs, not the buffer for jump targets (shortcuts). If the target
* is the single character ':', it will be treated equivalently to an
* Up-Arrow or Down-Arrow following a 'g'oto command, for accessing the
* circular buffer of goto URLs.
*/
/* #define PERMIT_GOTO_FROM_JUMP */
/*****************************
* If LYNX_HOST_NAME is defined here and/or in lynx.cfg, it will be
* treated as an alias for the local host name in checks for URLs on
* the local host (e.g., when the -localhost switch is set), and this
* host name, "localhost", and HTHostName (the fully qualified domain
* name of the system on which Lynx is running) will all be passed as
* local. A different definition in lynx.cfg will override this one.
*/
/* #define LYNX_HOST_NAME "www.cc.ukans.edu" */
/*********************
* LOCAL_DOMAIN is used for a tail match with the ut_host element of
* the utmp or utmpx structure on systems with utmp capabilites, to
* determine if a user is local to your campus or organization when
* handling -restrictions=inside_foo or outside_foo settings for ftp,
* news, telnet/tn3270 and rlogin URLs. An "inside" user is assumed
* if your system does not have utmp capabilities. CHANGE THIS here
* or in lynx.cfg.
*/
#define LOCAL_DOMAIN "ukans.edu"
/********************************
* The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be
* cached in memory at one time.
*
* This so-called cache size (actually, number) may be modified in lynx.cfg
* and or with the command line argument -cache=NUMBER The minimum allowed
* value is 2, for the current document and at least one to fetch, and there
* is no absolute maximum number of cached documents. On Unix, and VMS not
* compiled with VAXC, whenever the number is exceeded the least recently
* displayed document will be removed from memory.
*
* On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the
* amount (bytes) of virtual memory that can be allocated and not yet be freed
* before previous documents are removed from memory. If the values for both
* the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then
* least recently displayed documents will be freed until one or the other
* value is no longer exceeded. The value can be modified in lynx.cfg.
*
* The Unix and VMS but not VAXC implementations use the C library malloc's
* and calloc's for memory allocation, and procedures for taking the actual
* amount of cache into account still need to be developed. They use only
* the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum
* number of documents to cache (rather than the maximum number only if
* DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX).
*/
#define DEFAULT_CACHE_SIZE 10
#if defined(VMS) && defined(VAXC) && !defined(__DECC)
#define DEFAULT_VIRTUAL_MEMORY_SIZE 512000
#endif /* VMS && VAXC && !__DECC */
/********************************
* If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms
* with method POST, dumping any cache from a previous submission of the
* form, including when the document returned by that form is sought with
* the PREV_DOC command or via the history list. Lynx always resubmits
* forms with method POST when a submit button or a submitting text input
* is activated, but normally retrieves the previously returned document
* if it had links which you activated, and then go back with the PREV_DOC
* command or via the history list.
*
* The default defined here can be changed in lynx.cfg, and can be toggled
* via the -resubmit_posts command line switch.
*/
#define ALWAYS_RESUBMIT_POSTS FALSE
/********************************
* CHARACTER_SET defines the default character set, i.e., that assumed
* to be installed on the user's termimal. It determines which characters
* or strings will be used to represent 8-bit character entities within
* HTML. New character sets may be defined by modifying the file
* src/LYCharSets.c in the Lynx source code distribution and recompiling.
* For Asian (CJK) character sets, it also determines how Kanji code will
* be handled. The default defined here can be changed in lynx.cfg, and
* via the 'o'ptions menu. The 'o'ptions menu setting will be stored in
* the user's RC file whenever those settings are saved, and thereafter
* will be used as the default. Also see lynx.cfg for information about
* the -raw switch and LYE_RAW_TOGGLE command.
* The default character sets include:
* ISO Latin 1
* ISO Latin 2
* Other ISO Latin
* DEC Multinational
* IBM PC character set
* IBM PC codepage 850
* Macintosh (8 bit)
* NeXT character set
* KOI8-R character set
* Chinese
* Japanese (EUC)
* Japanese (SJIS)
* Korean
* Taipei (Big5)
* 7 bit approximations
*/
#define CHARACTER_SET "ISO Latin 1"
/*****************************
* PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en",
* "fr") which will be indicated by Lynx in its Accept-Language headers
* as the preferred language. If available, the document will be
* transmitted in that language. This definition can be overriden via
* lynx.cfg. Users also can change it via the 'o'ptions menu and save
* that preference in their RC file. This may be a comma-separated list
* of languages in decreasing preference.
*/
#define PREFERRED_LANGUAGE "en"
/*****************************
* PREFERRED_CHARSET specifies the character set in MIME notation (e.g.,
* "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in
* requests to http servers using an Accept-Charsets header. The value
* should NOT include "ISO-8859-1" or "US-ASCII", since those values are
* always assumed by default. If a file in that character set is available,
* the server will send it. Otherwise, the server will send the file in
* ISO-8859-1 or US-ASCII. Users can change or eliminate this definition
* via the 'o'ptions menu and save that preference in their RC file.
*/
#define PREFERRED_CHARSET ""
/*****************************
* If MULTI_BOOKMARK_SUPPORT is set TRUE, and BLOCK_MULTI_BOOKMARKS (see
* below) is FALSE, and sub-bookmarks exist, all bookmark operations will
* first prompt the user to select an active sub-bookmark file or the
* default bookmark file. FALSE is the default so that one (the default)
* bookmark file will be available initially. The default set here can
* be overridden in lynx.cfg. The user can turn on multiple bookmark
* support via the 'o'ptions menu, and can save that choice as the startup
* default via the .lynxrc file. When on, the setting can be STANDARD or
* ADVANCED. If support is set to the latter, and the user mode also is
* ADVANCED, the VIEW_BOOKMARK command will invoke a statusline prompt at
* which the user can enter the letter token (A - Z) of the desired bookmark,
* or '=' to get a menu of available bookmark files. The menu always is
* presented in NOVICE or INTERMEDIATE mode, or if the support is set to
* STANDARD. No prompting or menu display occurs if only one (the startup
* default) bookmark file has been defined (define additional ones via the
* 'o'ptions menu). The startup default, however set, can be overridden on
* the command line via the -restrictions=multibook or the -anonymous or
* -validate switches.
*/
#ifndef MULTI_BOOKMARK_SUPPORT
#define MULTI_BOOKMARK_SUPPORT FALSE
#endif /* MULTI_BOOKMARK_SUPPORT */
/*****************************
* If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will
* be forced off, and cannot be toggled on via the 'o'ptions menu. This
* compilation setting can be overridden via lynx.cfg.
*/
#ifndef BLOCK_MULTI_BOOKMARKS
#define BLOCK_MULTI_BOOKMARKS FALSE
#endif /* BLOCK_MULTI_BOOKMARKS */
/********************************
* URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be
* prepended (together with a scheme://) and appended to the first element
* of command line or 'g'oto arguments which are not complete URLs and
* cannot be opened as a local file (file://localhost/string). Both
* can be comma-separated lists. Each prefix must end with a dot, each
* suffix must begin with a dot, and either may contain other dots (e.g.,
* .com.jp). The default lists are defined here, and can be changed
* in lynx.cfg. Each prefix will be used with each suffix, in order,
* until a valid Internet host is created, based on a successful DNS
* lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu
* etc.). The first element can include a :port and/or /path which will
* be restored with the expanded host (e.g., wfbr:8002/dir/lynx will
* become http://www.wfbr.edu:8002/dir/lynx). The prefixes will not be
* used if the first element ends in a dot (or has a dot before the
* :port or /path), and similarly the suffixes will not be used if the
* the first element begins with a dot (e.g., .nyu.edu will become
* http://www.nyu.edu without testing www.nyu.com). Lynx will try to
* guess the scheme based on the first field of the expanded host name,
* and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr.
* will be made gopher://gopher.wfbr.edu).
*/
#define URL_DOMAIN_PREFIXES "www."
#define URL_DOMAIN_SUFFIXES ".com,.edu,.net,.org"
/********************************
* If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list
* and include the numbers of articles in news listings, instead of
* using an unordered list.
*
* The default defined here can be changed in lynx.cfg.
*/
#define LIST_NEWS_NUMBERS FALSE
/********************************
* If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of
* articles in news listings. The dates always are included in the
* articles, themselves.
*
* The default defined here can be changed in lynx.cfg.
*/
#define LIST_NEWS_DATES FALSE
/*************************
* Set NEWS_POSTING to FALSE if you do not want to support posting to
* news groups via Lynx. If left TRUE, Lynx will use its news gateway to
* post new messages or followups to news groups, using the URL schemes
* described in the "Supported URL" section of the online 'h'elp. The
* posts will be attempted via the nntp server specified in the URL, or
* if none was specified, via the NNTPSERVER configuration or environment
* variable. Links with these URLs for posting or sending followups are
* created by the news gateway when reading group listings or articles
* from nntp servers if the server indicates that it permits posting.
* The setting here can be changed in lynx.cfg.
*/
#define NEWS_POSTING TRUE
/*************************
* Define LYNX_SIG_FILE to the name of a file containing a signature which
* can be appended to email messages and news postings or followups. The
* user will be prompted whether to append it. It is sought in the home
* directory. If it is in a subdirectory, begin it with a dot-slash
* (e.g., ./lynx/.lynxsig). The definition here can be changed in lynx.cfg.
*/
#define LYNX_SIG_FILE ".lynxsig"
/********************************
* If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list
* of radio buttons for the OPTIONs in SELECT blocks which lack the
* MULTIPLE attribute, instead of using a popup menu. Note that if
* the MULTIPLE attribute is present in the SELECT start tag, Lynx
* always will create a vertical list of checkboxes for the OPTIONs.
*
* The default defined here can be changed in lynx.cfg, and can be
* toggled via the -popup command line switch.
*/
#define USE_SELECT_POPUPS TRUE
/********************************
* If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial
* BR tags. Note that the valid way to insert extra blank lines in
* HTML is via a PRE block with only newlines in the block.
*
* The default defined here can be changed in lynx.cfg.
*/
#define COLLAPSE_BR_TAGS TRUE
/********************************
* If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers
* in http server replies.
*
* The default defined here can be changed in lynx.cfg, and can be toggled
* via the -cookies command line switch.
*/
#define SET_COOKIES TRUE
/****************************************************************
* Section 2. Things that you probably want to change or review
*
*/
/*****************************
* The following three definitions set the number of seconds for
* pauses following statusline messages that would otherwise be
* replaced immediately, and are more important than the unpaused
* progress messages. Those set by INFOSECS are also basically
* progress messages (e.g., that a prompted input has been cancelled)
* and should have the shortest pause. Those set by MESSAGESECS are
* informational (e.g., that a function is disabled) and should have
* a pause of intermediate duration. Those set by ALERTSECS typically
* report a serious problem and should be paused long enough to read
* whenever they appear (typically unexpectedly). The default values
* defined here can be modified via lynx.cfg, should longer pauses be
* desired for braille-based access to Lynx.
*/
#define INFOSECS 1
#define MESSAGESECS 2
#define ALERTSECS 3
/*****************************
* Enter the name of your anonymous account if you have one
* as ANONYMOUS_USER. UNIX systems will use a cuserid
* or get_login call to determine if the current user is
* the ANONYMOUS_USER. VMS systems will use getenv("USER").
*
* You may use the "-anonymous" option for multiple accounts,
* or for precautionary reasons in the anonymous account,
* as well.
*
* It is very important to have this correctly defined or include
* the "-anonymous" command line option for invokations of Lynx
* in an anonymous account! If you do not you will be putting
* yourself at GREAT security risk!
*
* Later on in this file you can specify privileges for the
* anonymous account.
*/
#define ANONYMOUS_USER ""
/******************************
* SHOW_CURSOR controls whether or not the cursor is hidden or appears
* over the link. The default set here can be changed in lynx.cfg,
* and can be toggled with the -show_cursor command line option.
* Showing the cursor is handy if you are a sighted user with a poor
* terminal that can't do bold and reverse video at the same time or
* at all. It also can be useful to blind users, as an alternative
* or supplement to setting LINKS_ARE_NUMBERED.
*/
#define SHOW_CURSOR FALSE
/******************************
* BOXVERT and BOXHORI control the layout of popup menus. Set to 0 if your
* curses supports line-drawing characters, set to '*' or any other character
* to not use line-drawing (e.g., '|' for vertical and '-' for horizontal).
*/
#define BOXVERT '*'
/* #define BOXVERT 0 */
#define BOXHORI '*'
/* #define BOXHORI 0 */
/******************************
* LY_UMLAUT controls the 7-bit expansion of characters with dieresis or
* umlaut. If defined, a digraph is displayed, e.g., auml --> ae
* Otherwise, a single character is displayed, e.g., auml --> a
*/
#define LY_UMLAUT
/*******************************
* set to FALSE if you don't want users of your anonymous account
* who are calling from inside your local domain
* to be able to telnet back out
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_TELNET TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from outside your
* local domain to be able to telnet back out
*/
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_TELNET TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous account
* who are calling from inside your local domain
* to be able to read news
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_READ_NEWS TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from outside your
* local domain to be able to read news
*/
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_READ_NEWS FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from inside your local domain
* to be able to use ftp
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_FTP TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from outside your local domain
* to be able to use ftp
*/
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_FTP TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from inside your local domain
* to be able to use rlogin
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_RLOGIN TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account who are calling from outside your local domain
* to be able to use rlogin
*/
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_RLOGIN TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to goto random URLs. (The 'g' command)
*/
#define CAN_ANONYMOUS_GOTO TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to goto particular URLs.
*/
#define CAN_ANONYMOUS_GOTO_CSO TRUE
#define CAN_ANONYMOUS_GOTO_FILE TRUE
#define CAN_ANONYMOUS_GOTO_FINGER TRUE
#define CAN_ANONYMOUS_GOTO_FTP TRUE
#define CAN_ANONYMOUS_GOTO_GOPHER TRUE
#define CAN_ANONYMOUS_GOTO_HTTP TRUE
#define CAN_ANONYMOUS_GOTO_HTTPS TRUE
#define CAN_ANONYMOUS_GOTO_LYNXCGI TRUE
#define CAN_ANONYMOUS_GOTO_LYNXEXEC TRUE
#define CAN_ANONYMOUS_GOTO_LYNXPROG TRUE
#define CAN_ANONYMOUS_GOTO_MAILTO TRUE
#define CAN_ANONYMOUS_GOTO_NEWS TRUE
#define CAN_ANONYMOUS_GOTO_NNTP TRUE
#define CAN_ANONYMOUS_GOTO_RLOGIN TRUE
#define CAN_ANONYMOUS_GOTO_SNEWS TRUE
#define CAN_ANONYMOUS_GOTO_TELNET TRUE
#define CAN_ANONYMOUS_GOTO_TN3270 TRUE
#define CAN_ANONYMOUS_GOTO_WAIS TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to specify a port in 'g'oto commands
* for telnet URLs.
*/
#define CAN_ANONYMOUS_GOTO_TELNET_PORT FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to jump to URLs (The 'J' command)
* via the shortcut entries in your JUMPFILE.
*/
#define CAN_ANONYMOUS_JUMP TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to mail
*/
#define CAN_ANONYMOUS_MAIL TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to print
*/
#define CAN_ANONYMOUS_PRINT FALSE
/*******************************
* Execution links/scripts configuration.
*
* Execution links and scripts allow you to run
* local programs by activating links within Lynx.
*
* An execution link is of the form:
*
* lynxexec:
* or:
* lynxexec://
* or:
* lynxprog:
* or:
* lynxprog://
*
* where is a command that Lynx will run when the link is
* activated. The double-slash should be included if the command begins
* with an '@', as for executing VMS command files. Otherwise, the double-
* slash can be omitted.
* Use lynxexec for commands or scripts that generate a screen output which
* should be held via a prompt to press before returning to Lynx
* for display of the current document.
* Use lynxprog for programs such as mail which do require a pause before
* Lynx restores the display of the current document.
*
* Execution scripts take the form of a standard
* URL. Extension mapping or MIME typing is used
* to decide if the file is a script and should be
* executed. The current extensions are:
* .csh, .ksh, and .sh on UNIX systems and .com on
* VMS systems. Any time a file of this type is
* accessed Lynx will look at the user's options
* settings to decide if the script can be executed.
* Current options include: Only exec files that
* reside on the local machine and are referenced
* with a "file://localhost" URL, All execution
* off, and all execution on.
*
* The following definitions will add execution
* capabilities to Lynx. You may define none, one
* or both.
*
* I strongly recommend that you define neither one
* of these since execution links/scripts can represent
* very serious security risk to your system and its
* users. If you do define these I suggest that
* you only allow users to execute files/scripts
* that reside on your local machine.
*
* YOU HAVE BEEN WARNED!
*
* Note: if you are enabling execution scripts you should
* also see src/HTInit.c to verify/change the execution
* script extensions and/or commands.
*/
/* #define EXEC_LINKS */
/* #define EXEC_SCRIPTS */
/**********
* UNIX:
* =====
* CGI script support. Defining LYNXCGI_LINKS allows you to use the
*
* lynxcgi:path
*
* URL which allows lynx to access a cgi script directly without the need for
* a http daemon. Redirection or mime support is not supported but just about
* everything else is. If the path is not an executable file then the URL is
* rewritten as file://localhost and passed to the file loader. This means that
* if your http:html files are currently set up to use relative addressing, you
* should be able to fire up your main page with lynxcgi:path and everything
* should work as if you were talking to the http daemon.
*
* Note that TRUSTED_LYNXCGI directives must be defined in your lynx.cfg file
* if you wish to place restrictions on source documents and/or paths for
* lynxcgi links.
*
* The cgi scripts are called with a fork()/execve() sequence so you don't
* have to worry about people trying to abuse the code. :-)
*
* George Lindholm (George.Lindholm@ubc.ca)
*
* VMS:
* ====
* The lynxcgi scheme, if enabled, yields an informational message regardless
* of the path, and use of the freeware OSU DECthreads server as a local
* script server is recommended instead of lynxcgi URLs. Uncomment the
* following line to define LYNXCGI_LINKS, and when running Lynx, enter
* lynxcgi:advice as a G)oto URL for more information and links to the
* OSU server distribution.
*/
/* #define LYNXCGI_LINKS */
#if defined(EXEC_LINKS) || defined(EXEC_SCRIPTS)
/**********
* if ALLOW_USERS_TO_CHANGE_EXEC_WITHIN_OPTIONS
* is defined then the user will be able to change
* the execution status within the options screen.
*/
/* #define ALLOW_USERS_TO_CHANGE_EXEC_WITHIN_OPTIONS */
/**********
* if NEVER_ALLOW_REMOTE_EXEC is defined then local execution of
* scripts or lynxexec and lynxprog URLs will only be implemented
* from HTML files that were accessed via a "file://localhost/" URL,
* and the options menu for "L)ocal executions links" will only
* allow toggling between "ALWAYS OFF" and "FOR LOCAL FILES ONLY".
*/
/* #define NEVER_ALLOW_REMOTE_EXEC */
/*****************************
* These are for executable shell scripts and links.
* Set to FALSE unless you really know what you're
* doing.
*
* This only applies if you are compiling with EXEC_LINKS or
* EXEC_SCRIPTS defined.
*
* The first two settings:
* LOCAL_EXECUTION_LINKS_ALWAYS_ON
* LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE
* specify the DEFAULT setting of the users execution link
* options, but the user may still change those options.
* If you do not wish the user to be able to change the
* execution link settings you may wish to use the commandline option:
* -restrictions=exec_frozen
*
* LOCAL_EXECUTION_LINKS_ALWAYS_ON will be FALSE
* if NEVER_ALLOW_REMOTE_EXEC has been defined.
*
* if LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS is
* true all execution links will be disabled when the
* -anonymous command line option is used. Anonymous
* users are not allowed to change the execution options
* from within the Lynx options menu so you might be able
* to use this option to enable execution links and set
* LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE to TRUE to
* give anonymous execution link capability without compromising
* your system (see comments about TRUSTED_EXEC rules in
* lynx.cfg for more information).
*
*/
#define LOCAL_EXECUTION_LINKS_ALWAYS_ON FALSE
#define LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE FALSE
#define LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS FALSE
#endif /* defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) */
/*********************************
* MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of
* the information if there is one, every time
* that a document cannot be accessed!
*
* NOTE: This can generate A LOT of mail, be warned.
*/
#define MAIL_SYSTEM_ERROR_LOGGING FALSE /*mail a message for every error?*/
/*********************************
* If CHECKMAIL is set to TRUE, the user will be informed (via a statusline
* message) about the existence of any unread mail at startup of Lynx, and
* will get statusline messages if subsequent new mail arrives. If a jumps
* file with a lynxprog URL for invoking mail is available, or your html
* pages include an mail launch file URL, the user thereby can access mail
* and read the messages. The checks and statusline reports will not be
* performed if Lynx has been invoked with the -restrictions=mail switch.
*
* VMS USERS !!!
* New mail is normally broadcast as it arrives, via "unsolicitied screen
* broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W
* command. You may prefer to disable the broadcasts and use CHECKMAIL
* instead (e.g., in a public account which will be used by people who
* are ignorant about VMS).
*/
#define CHECKMAIL FALSE /* report unread and new mail messages */
/*********************************
* VI_KEYS can be turned on by the user in the options
* screen or the .lynxrc file. This is just the default.
*/
#define VI_KEYS_ALWAYS_ON FALSE /* familiar h,j,k, & l */
/*********************************
* EMACS_KEYS can be turned on by the user in the options
* screen or the .lynxrc file. This is just the default.
*/
#define EMACS_KEYS_ALWAYS_ON FALSE /* familiar ^N, ^P, ^F, ^B */
/*********************************
* DEFAULT_KEYPAD_MODE specifies whether by default the user
* has numbers that work like arrows or else numbered links
* DEFAULT KEYPAD MODE may be set to
* LINKS_ARE_NUMBERED or
* NUMBERS_AS_ARROWS
*/
#define DEFAULT_KEYPAD_MODE NUMBERS_AS_ARROWS
/********************************
* The default search.
* This is a default that can be overridden by the user!
*/
#define CASE_SENSITIVE_ALWAYS_ON FALSE /* case sensitive user search */
/********************************
* If NO_DOT_FILES is set TRUE here or in lynx.cfg, the user will not be
* allowed to specify files beginning with a dot in reply to output filename
* prompts, and files beginning with a dot (e.g., file://localhost/foo/.lynxrc)
* will not be included in the directory browser's listings. The setting here
* will be overridden by the setting in lynx.cfg. If FALSE, you can force it
* to be treated as TRUE via -restrictions=dotfiles (or -anonymous, which sets
* this and most other restrictions).
*
* If it's FALSE at startup of Lynx, the user can regulate it via the
* 'o'ptions menu, and may save the preference in the RC file.
*/
#define NO_DOT_FILES TRUE /* disallow access to dot files */
/********************************
* If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links
* which can be ACTIVATEd. For inlines, the ALT or pseudo-ALT ("[INLINE]")
* strings will be links for the resolved SRC rather than just text. For
* ISMAP or other graphic links, the ALT or pseudo-ALT ("[ISMAP]" or "[LINK]")
* strings will have '-' and a link labeled "[IMAGE]" for the resolved SRC
* appended.
*
* The default defined here can be changed in lynx.cfg, and the user can
* use LYK_IMAGE_TOGGLE to toggle the feature on or off at run time.
*
* The default also can be toggled via an "-image_links" command line switch.
*/
#define MAKE_LINKS_FOR_ALL_IMAGES FALSE /* inlines cast to links */
/********************************
* If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which do not
* specify an ALT string will not have "[INLINE]" inserted as a pseudo-ALT,
* i.e., they'll be treated as having ALT="". If MAKE_LINKS_FOR_ALL_IMAGES
* is defined or toggled to TRUE, however, the pseudo-ALTs will be created
* for inlines, so that they can be used as links to the SRCs.
*
* The default defined here can be changed in lynx.cfg, and the user can
* use LYK_INLINE_TOGGLE to toggle the feature on or off at run time.
*
* The default also can be toggled via a "-pseudo_inlines" command line
* switch.
*/
#define MAKE_PSEUDO_ALTS_FOR_INLINES TRUE /* Use "[INLINE]" pseudo-ALTs */
/********************************
* If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used
* for emphasis tags in dumps.
*
* The default defined here can be changed in lynx.cfg, and the user can
* toggle the default via a "-underscore" command line switch.
*/
#define SUBSTITUTE_UNDERSCORES FALSE /* Use _underline_ format in dumps */
/********************************
* If QUIT_DEFAULT_YES is defined then when the QUIT command is entered,
* any response other than n or N will confirm. Comment this out if
* you prefer the more conservative action of requiring an explicit
* Y or y to confirm.
*/
#define QUIT_DEFAULT_YES
/********************************
* These definitions specify files created or used in conjunction
* with traversals. See CRAWL.ANNOUNCE for more infomation.
*/
#define TRAVERSE_FILE "traverse.dat"
#define TRAVERSE_FOUND_FILE "traverse2.dat"
#define TRAVERSE_REJECT_FILE "reject.dat"
#define TRAVERSE_ERRORS "traverse.errors"
/****************************************************************
* Section 3. Things that you should not change until you
* have a good knowledge of the program
*/
#define LYNX_NAME "Lynx"
#define LYNX_VERSION "2.7.1"
/****************************************************************
* The LYMessages_en.h header defines default, English strings
* used in statusline prompts, messages, and warnings during
* program execution. See the comments in LYMessages_en.h for
* information on customizing them for your site.
*/
#ifndef HTTELNET_H
#include "LYMessages_en.h"
#endif /* !HTTELNET_H */
#ifndef MAXINT
#define MAXINT 2147483647 /* max integer */
#endif /* !MAXINT */
#define MAXBASE 100 /* max length of base directory */
#define MAXHIGHLIGHT 160 /* max length of highlighted text */
#define MAXTARGET 130 /* max length of target string */
#define LINESIZE 1024 /* max length of line to read from file */
#define MAXFNAME 1280 /* max filename length DDD/FILENAME.EXT */
#define MAXCOMMAND MAXFNAME /* max length of command should be the same */
#define MAXHIST 1024 /* max links we remember in history */
#define MAXLINKS 1024 /* max links on one screen */
#ifdef VMS
/*
** Use the VMS port of gzip for uncompressing both .Z and .gz files.
*/
#define UNCOMPRESS_PATH "gzip -d"
#define GZIP_PATH "gzip"
#else
/*
** Check these paths on Unix!
** ==========================
*/
#if defined(__FreeBSD__)||defined(__NetBSD__)||defined(__bsdi__)||defined(LINUX)
/*
** FreeBSD, NetBSD, BSDI, or Linux:
** ================================
*/
#define COMPRESS_PATH "/usr/bin/compress"
#define UNCOMPRESS_PATH "/usr/bin/gunzip"
#define UUDECODE_PATH "/usr/bin/uudecode"
#define ZCAT_PATH "/usr/bin/zcat"
#define GZIP_PATH "/usr/bin/gzip"
#define INSTALL_PATH "/usr/bin/install"
#define TAR_PATH "/usr/bin/tar"
#define TOUCH_PATH "/usr/bin/touch"
#else
/*
** Other Unix:
** ===========
*/
#define COMPRESS_PATH "/usr/ucb/compress"
#define UNCOMPRESS_PATH "/usr/ucb/uncompress"
#define UUDECODE_PATH "/bin/uudecode"
#define ZCAT_PATH "/usr/local/bin/zcat"
#define GZIP_PATH "/usr/local/bin/gzip"
#define INSTALL_PATH "/bin/install"
#define TAR_PATH "/bin/tar"
#define TOUCH_PATH "/bin/touch"
#endif /* __FreeBSD__ || __NetBSD__ || __bsdi__ || LINUX */
/*
** All Unix:
** =========
*/
#define ZIP_PATH "/usr/local/bin/zip"
#define UNZIP_PATH "/usr/local/bin/unzip"
#define MKDIR_PATH "/bin/mkdir"
#define MV_PATH "/bin/mv"
#define RM_PATH "/bin/rm"
#define COPY_PATH "/bin/cp"
#define CHMOD_PATH "/bin/chmod"
#endif /* VMS */
#endif /* USERDEFS_H */