From a3628fc49db4d88ff3e4067268650710d1da3f6f Mon Sep 17 00:00:00 2001 From: Silvino Silva Date: Fri, 12 Feb 2021 03:59:34 +0000 Subject: initial openbsd support --- linux/linux.html | 866 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 866 insertions(+) create mode 100644 linux/linux.html (limited to 'linux/linux.html') diff --git a/linux/linux.html b/linux/linux.html new file mode 100644 index 0000000..9d568e9 --- /dev/null +++ b/linux/linux.html @@ -0,0 +1,866 @@ + + + + + 2.1. Kernel Linux + + + + Core OS Index + +

2.1. Kernel Linux

+ +

Linux is a monolith kernel, a big one ! Visit + Linux Libre + and + Linux Non-Libre pages for more links + and information.

+ +

Spectre-meltdown checker;

+
+        https://github.com/speed47/spectre-meltdown-checker/
+        
+ +

2.1.1. Download Linux Libre

+ +

Download Linux Source from + linux libre, + or using the port system;

+ +
+        $ mkdir ~/kernel
+        $ cd ~/kernel
+        $ cd linux-4.9.86/
+        
+ +

Gcc graysky2 kernel_gcc_patch (master.zip) + that adds more cpu options (FLAGS) for native builds. + Check Pkgfile + for instructions how linux-gnu port is built.

+ +

Check version on Makefile;

+ +
+        VERSION = 4
+        PATCHLEVEL = 9
+        SUBLEVEL = 86
+        EXTRAVERSION = -gnu
+        NAME = Roaring Lionus
+        
+ +

Change cpu optimization patch;

+ +
+        depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
+        
+ +

to;

+ +
+        depends on (MK8 || MK7 || MCORE2 || MPSC || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
+        
+ +

Apply additional cpu optimizations patch;

+ +
+        $ patch -p1 < ../enable_additional_cpu_optimizations_for_gcc_v4.9%2B_kernel_v3.15%2B.patch
+        
+ +

Cleaning targets:

+ +
+        clean           - Remove most generated files but keep the config and
+                    enough build support to build external modules
+        mrproper        - Remove all generated files + config + various backup files
+        distclean       - mrproper + remove editor backup and patch files
+        
+ +

Prepare sources for configuration;

+ +
+        $ make distclean
+        
+ +

2.1.2. Configure

+ +

Port linux-gnu port comes with default configuration file that is + a good starting point to tune kernel according to your needs. To + automatically configure kernel with support to your hardware + based on modules loaded by current kernel run.

+ +
+        $ make localmodconfig
+        
+ +

To get more information about the hardware, for example + information about which graphic module (driver) is in use + as root run;

+ +
+        # lspci -nnk | grep -i vga -A3 | grep 'in use'
+        Kernel driver in use: i915
+        
+ +

Make configuration targets;

+ +
+        config          - Update current config utilising a line-oriented program
+        nconfig         - Update current config utilising a ncurses menu based program
+        menuconfig      - Update current config utilising a menu based program
+        xconfig         - Update current config utilising a Qt based front-end
+        gconfig         - Update current config utilising a GTK+ based front-end
+        oldconfig       - Update current config utilising a provided .config as base
+        localmodconfig  - Update current config disabling modules not loaded
+        localyesconfig  - Update current config converting local mods to core
+        silentoldconfig - Same as oldconfig, but quietly, additionally update deps
+        defconfig       - New config with default from ARCH supplied defconfig
+        savedefconfig   - Save current config as ./defconfig (minimal config)
+        allnoconfig     - New config where all options are answered with no
+        allyesconfig    - New config where all options are accepted with yes
+        allmodconfig    - New config selecting modules when possible
+        alldefconfig    - New config with all symbols set to default
+        randconfig      - New config with random answer to all options
+        listnewconfig   - List new options
+        olddefconfig    - Same as silentoldconfig but sets new symbols to their default value
+        kvmconfig       - Enable additional options for kvm guest kernel support
+        xenconfig       - Enable additional options for xen dom0 and guest kernel support
+        tinyconfig      - Configure the tiniest possible kernel
+        
+ +

Following configuration try's to be generic about the hardware + support while addressing the requirements of applications such as + qemu, docker, etc. For more information about hardening options read + kernsec.org. Configure kernel + using ncurses;

+ +
+        $ make nconfig
+        
+ +
+            CONFIG_BUG_ON_DATA_CORRUPTION=y
+
+            # Perform extensive checks on reference counting.
+            CONFIG_REFCOUNT_FULL=y
+
+            # Check for memory copies that might overflow a structure in str*() and mem*() functions both at build-time and run-time.
+            CONFIG_FORTIFY_SOURCE=y
+
+        
+ +

2.1.2.1 General Setup

+
+
CONFIG_POSIX_MQUEUE=y
+
POSIX Message Queues
+ +
CONFIG_VMAP_STACK=y
+
Use a virtually-mapped stack
+
Adds guard pages to kernel stacks (not all architectures + support this yet).
+ +
CONFIG_CGROUPS=y
+
Control Group support
+ +
CONFIG_MEMCG=y
+
Memory controller
+ +
CONFIG_MEMCG_SWAP=y
+
Swap controller
+ +
CONFIG_MEMCG_SWAP_ENABLED=y
+
Swap controller enabled by default
+ +
CONFIG_BLK_CGROUP=y
+
IO controller
+ +
CGROUP_SCHED=y
+
CPU controller
+ +
FAIR_GROUP_SCHED=y
+
Group scheduling for SCHED_OTHER
+ +
CONFIG_CFS_BANDWIDTH=y
+
CPU bandwidth provisioning for FAIR_GROUP_SCHED
+ +
CONFIG_RT_GROUP_SCHED=y
+
Group scheduling for SCHED_RR/FIFO
+ +
CONFIG_CGROUP_PIDS=y
+
PIDs controller
+ +
Freezer controller
+
HugeTLB controller
+
Cpuset controller
+
Include legacy /proc//cpuset file
+
Device controller
+
Simple CPU accounting controller
+
Perf controller
+
+ +

Namespaces support

+
+
UTS namespace
+
IPC namespace
+
User namespace
+
PID Namespaces
+
Network namespace
+
+ +
+ +
CONFIG_COMPAT_BRK=n
+
Disable heap randomization
+
Dangerous; enabling this disables brk ASLR.
+ +
CONFIG_SLAB_FREELIST_RANDOM=y
+
Randomize allocator freelists, harden metadata.
+ +
CONFIG_SLAB_FREELIST_HARDENED=y
+
Randomize allocator freelists, harden metadata.
+ +
CONFIG_SLUB_DEBUG=y
+
Enable SLUB debugging support
+
Allow allocator validation checking to be enabled + (see "slub_debug=P" below).
+ +
CONFIG_CC_STACKPROTECTOR=y
+
Use -fstack-protector-strong (gcc 4.9+) for best stack canary coverage.
+ +
CONFIG_CC_STACKPROTECTOR_STRONG=y
+
Use -fstack-protector-strong (gcc 4.9+) for best stack canary coverage.
+
+ + +

2.1.2.2 Enable loadable module support

+
+ +
CONFIG_MODULES=y
+
Enable loadable module support +
Keep root from altering kernel memory via loadable modules. + set CONFIG_MODULES=n
+
But if CONFIG_MODULE=y is needed, at least they must be + signed with a per-build key.
+ +
CONFIG_DEBUG_SET_MODULE_RONX=y
+
(prior to v4.11)
+ +
CONFIG_STRICT_MODULE_RWX=y
+
(since v4.11)
+ +
CONFIG_MODULE_SIG=y
+
Module signature verification
+ +
CONFIG_MODULE_SIG_FORCE=y
+
Require modules to be validly signed
+ +
CONFIG_MODULE_SIG_ALL=y
+
Automatically sign all modules
+ +
CONFIG_MODULE_SIG_SHA512=y
+
Sign modules with SHA-512
+
+ +

2.1.2.3 Enable the block layer

+
+
BLK_DEV_THROTTLING=y
+
Block layer bio throttling support
+ +
IOSCHED_CFQ=y
+
CFQ IO scheduler
+ +
CONFIG_CFQ_GROUP_IOSCHED=y
+
CFQ Group Scheduling support
+
+ +

2.1.2.4 Processor type and features

+ +
+
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
+
Low address space to protect from user allocation
+
Disallow allocating the first 64k of memory.
+ +
X86_VSYSCALL_EMULATION=n
+
Enable vsyscall emulation
+
Required by programs before 2013, some programs my + require.
+
Remove additional attack surface, unless you really + need them.
+ +
CONFIG_SECCOMP=y
+
Enable seccomp to safely compute untrusted bytecode
+
Provide userspace with seccomp BPF API for syscall attack surface reduction.
+ +
CONFIG_SECCOMP_FILTER=y
+
Provide userspace with seccomp BPF API for syscall attack surface reduction.
+ +
CONFIG_KEXEC=n
+
kexec system call
+
Dangerous; enabling this allows replacement + of running kernel.
+ +
CONFIG_RANDOMIZE_BASE=y
+
Randomize the address of the kernel image (KASLR)
+ +
CONFIG_RANDOMIZE_MEMORY=y
+
Randomize the kernel memory sections
+ +
CONFIG_LEGACY_VSYSCALL_NONE=y
+
vsyscall table for legacy applications (None)
+
Modern libc no longer needs a fixed-position mapping in userspace, remove it as a possible target.
+ +
CONFIG_COMPAT_VDSO=n
+
Disable the 32-bit vDSO (needed for glibc 2.3.3)
+
Dangerous; enabling this disables VDSO ASLR.
+ +
CONFIG_MODIFY_LDT_SYSCALL=n
+
Enable the LDT (local descriptor table)
+
Remove additional attack surface, unless you really need them.
+
+ +

2.1.2.5 Power management and ACPI options

+ +
+
CONFIG_HIBERNATION=n
+
Hibernation (aka 'suspend to disk')
+
Dangerous; enabling this allows replacement of running + kernel.
+ +
CONFIG_ACPI_CUSTOM_METHOD=n
+
Allow ACPI methods to be inserted/replaced at run time
+
Dangerous; enabling this allows direct physical + memory writing.
+
+ + +

2.1.2.6 Bus options (PCI etc.)

+

2.1.2.7 Executable file formats / Emulations

+
+ +
CONFIG_BINFMT_MISC=n
+
Kernel support for MISC binaries
+
Easily confused by misconfigured userspace, keep off.
+ +
CONFIG_IA32_EMULATION
+
Remove additional attack surface, unless you really need them.
+
CONFIG_X86_X32
+
Remove additional attack surface, unless you really need them.
+
+ +

2.1.2.8 Networking support

+

Networking options

+
+
CONFIG_INET_DIAG=m
+
INET: socket monitoring interface
+
Support for INET (TCP, DCCP, etc) socket monitoring + interface used by native Linux tools such as ss. ss is + included in iproute2
+
Prior to v4.1, assists heap memory attacks; + best to keep interface disabled.
+ +
CONFIG_BRIDGE=y
+
802.1d Ethernet Bridging
+ +
CONFIG_NET_SCHED=y
+
QoS and/or fair queueing
+ +
CONFIG_NET_CLS_CGROUP=y
+
Control Group Classifier
+ +
CONFIG_VSOCKETS=y
+
Virtual Socket protocol
+ +
CONFIG_VIRTIO_VSOCKETS=y
+
virtio transport for Virtual Sockets
+ +
CONFIG_NET_L3_MASTER_DEV=y
+
L3 Master device support
+ +
CONFIG_CGROUP_NET_PRIO=y
+
Network priority cgroup
+ +
CGROUP_NET_CLASSID=y
+
Network classid cgroup
+ +
+ +
+
CONFIG_NETFILTER=y
+
Network packet filtering framework (Netfilter)
+ +
CONFIG_NETFILTER_ADVANCED=y
+
Advanced netfilter configuration
+ +
BRIDGE_NETFILTER=y
+
Bridged IP/ARP packets filtering
+ +
NF_CONNTRACK=y
+
Netfilter connection tracking support
+ +
NETFILTER_XT_MATCH_ADDRTYPE=y
+
"addrtype" address type match support
+ +
NETFILTER_XT_MATCH_CONNTRACK=y
+
"conntrack" connection tracking match support
+ +
CONFIG_NETFILTER_XT_MATCH_IPVS=y
+
"ipvs" match support
+ +
CONFIG_IP_VS=y
+
IP virtual server support
+ +
IP_VS_PROTO_TCP=y
+
TCP load balancing support
+ +
IP_VS_PROTO_UDP=y
+
UDP load balancing support
+ +
IP_VS_RR=y
+
round-robin scheduling
+ +
IP_VS_NFCT=y
+
Netfilter connection tracking
+ +
CONFIG_NF_CONNTRACK_IPV4=y
+
IPv4 connection tracking support (required for NAT)
+ +
NF_NAT_IPV4=y
+
IPv4 NAT
+ +
NF_NAT_MASQUERADE_IPV4=y
+
IPv4 masquerade support
+ +
IP_NF_IPTABLES=y
+
IP tables support (required for filtering/masq/NAT)
+ +
IP_NF_FILTER=y
+
Packet filtering
+ +
CONFIG_IP_NF_NAT=y
+
iptables NAT support
+ +
IP_NF_TARGET_MASQUERADE=y
+
MASQUERADE target support
+ +
IP_NF_TARGET_NETMAP=y
+
NETMAP target support
+ +
IP_NF_TARGET_REDIRECT=y
+
REDIRECT target support
+ +
CONFIG_SYN_COOKIES=y
+
IP: TCP syncookie support
+
Provides some protections against SYN flooding.
+ +
+ +

2.1.2.9 Device Drivers

+ +

Block devices

+
+
CONFIG_VIRTIO_BLK=y
+
This is the virtual block driver for virtio.
+
For QEMU based VMMs.
+
BLK_DEV_NBD=y
+
Network block device support.
+
+ +

SCSI device support

+
+
CONFIG_SCSI_VIRTIO=y
+
This is the virtual HBA driver for virtio. + If the kernel will used in a virtual machine.
+
+ +

Multiple devices driver support (RAID and LVM)

+ +
+
CONFIG_MD=y
+
Multiple devices driver support (RAID and LVM)
+
CONFIG_BLK_DEV_DM=y
+
Device mapper support
+
DM_THIN_PROVISIONING=y
+
Thin provisioning target
+
+ +

Network device support

+ +
+
CONFIG_NETDEVICES=y
+
Network device support
+ +
NET_CORE=y
+
Network core driver support
+ +
CONFIG_DUMMY=y
+
Dummy net driver support
+ +
CONFIG_MACVLAN=y
+
MAC-VLAN support
+
This allows one to create virtual interfaces that map + packets to or from specific MAC addresses to a particular + interface. Macvlan devices can be added using the "ip" command + from the route2 package starting with the iproute2.
+
ip link add link [ address MAC ] [ NAME ] type macvlan"
+ +
CONFIG_VXLAN=y
+
Virtual eXtensible Local Area Network (VXLAN)
+
BLK_DEV_NBD=y
+
Network block device support.
+ +
CONFIG_TUN=y
+
Universal TUN/TAP device driver support
+ +
CONFIG_VETH=y
+
Virtual ethernet pair device.
+ +
CONFIG_VIRTIO_NET=y
+
Virtio network driver.
+ +
IPVLAN=n
+
IP-VLAN support
+
Requires ipv6
+
+ +

Character devices

+
+
CONFIG_DEVMEM=n
+
/dev/mem virtual device support
+
Do not allow direct physical memory access (but if you must have it, at least enable CONFIG_STRICT_DEVMEM mode...)
+ +
Enable TTY
+
Unix98 PTY support
+ +
CONFIG_LEGACY_PTYS=n
+
Legacy (BSD) PTY support
+
Use the modern PTY interface (devpts) only.
+ +
Support multiple instances of devpts
+ +
CONFIG_DEVKMEM=n
+
/dev/kmem virtual device support
+
Dangerous; enabling this allows direct kernel + memory writing.
+
+ +

Virtio drivers

+
+
CONFIG_VIRTIO_PCI=y
+
PCI driver for virtio devices
+
+ +

2.1.2.10 Firmware Drivers

+

2.1.2.11 File systems

+
+
Overlay filesystem support
+ +
CONFIG_PROC_KCORE=n
+
/proc/kcore support
+
Dangerous; exposes kernel text image layout.
+ +
HugeTLB file system support
+ +
CONFIG_FUSE_FS=y
+
FUSE (Filesystem in Userspace) support
+ +
+ +

2.1.2.12 Kernel hacking

+ +
+
CONFIG_DEBUG=y
+
CONFIG_DEBUG_RODATA=y
+ +
CONFIG_DEBUG_KERNEL=y
+
Kernel debugging
+
Make sure kernel page tables have safe permissions.
+ +
CONFIG_STRICT_KERNEL_RWX=y
+
since v4.11
+
Make sure kernel page tables have safe permissions.
+ +
CONFIG_PANIC_ON_OOPS=y
+
Panic on Oops
+
This feature is useful to ensure that the kernel does not do + anything erroneous after an oops which could result in data + corruption or other issues.
+ +
CONFIG_PANIC_TIMEOUT=-1
+
Reboot devices immediately if kernel experiences an Oops.
+ +
CONFIG_SCHED_STACK_END_CHECK=y
+
Detect stack corruption on calls to schedule()
+
Perform additional validation of various commonly targeted structures.
+ +
CONFIG_DEBUG_LIST=y
+
Debug linked list manipulation
+
Perform additional validation of various commonly targeted structures.
+ +
CONFIG_DEBUG_SG=y
+
Debug SG table operations
+
Perform additional validation of various commonly targeted structures.
+ +
CONFIG_DEBUG_NOTIFIERS=y
+
Debug notifier call chains
+
Perform additional validation of various commonly + targeted structures.
+ +
CONFIG_DEBUG_CREDENTIALS=y
+
Debug credential management
+
Perform additional validation of various commonly + targeted structures.
+ +
CONFIG_STRICT_DEVMEM=y
+
Filter access to /dev/mem
+
Do not allow direct physical memory access (but if you must have it, at least enable STRICT mode...)
+ +
CONFIG_IO_STRICT_DEVMEM=y
+
Filter I/O access to /dev/mem
+
Do not allow direct physical memory access (but if you must have it, at least enable STRICT mode...)
+ +
CONFIG_DEBUG_WX=y
+
Warn on W+X mappings at boot
+
Report any dangerous memory permissions + (not available on all archs).
+ + +
+ +

Compile-time checks and compiler options

+
+
CONFIG_DEBUG_FS=y
+
Debug Filesystem
+ +
+ +

Memory Debugging

+
+
CONFIG_PAGE_POISONING=y
+
Poison pages after freeing
+
Wipe higher-level memory allocations when they are freed + (needs "page_poison=1" command line below).
+ +
CONFIG_PAGE_POISONING_NO_SANITY=y
+
Only poison, don't sanity check
+
(If you can afford even more performance penalty, + leave CONFIG_PAGE_POISONING_NO_SANITY=n)
+ +
CONFIG_PAGE_POISONING_ZERO=y
+
Use zero for poisoning instead of random data
+ +
+ +

2.1.2.13 Security options

+ +
+
Enable access key retention support
+
Enable register of persistent per-UID keyrings
+
ENCRYPTED KEYS
+
Diffie-Hellman operations on retained keys
+ +
CONFIG_SECURITY=y
+
Enable different security models
+
Provide userspace with ptrace ancestry protections.
+ +
CONFIG_HARDENED_USERCOPY=y
+
Harden memory copies between kernel and userspace
+
Perform usercopy bounds checking.
+ +
SECURITY_SELINUX=n
+
NSA SELinux Support
+
CONFIG_SECURITY_SELINUX_DISABLE=n
+
NSA SELinux runtime disable
+
If SELinux can be disabled at runtime, the LSM structures cannot be read-only; keep off.
+ +
CONFIG_SECURITY_APPARMOR=y
+
AppArmor support
+
This enables the AppArmor security module. Rquired userspace + tools (if they are not included in your distribution) and further + information may be found at AppArmor
+
CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+
AppArmor boot parameter default value
+ +
CONFIG_SECURITY_YAMA=y
+
Yama support
+
Provide userspace with ptrace ancestry protections.
+
+ +

2.1.2.14 Cryptographic API

+ +
+
CONFIG_CRYPTO_LRW
+
Liskov Rivest Wagner, a tweakable, non malleable, non movable + narrow block cipher mode for dm-crypt.
+ +
CONFIG_CRYPTO_RMD160=y
+
CONFIG_CRYPTO_RMD256=y
+
CONFIG_CRYPTO_RMD320=y
+
RIPEMD 160/256/320 digest algorithm
+ +
CONFIG_CRYPTO_SHA256=y
+
SHA224 and SHA256 digest algorithm
+ +
CONFIG_CRYPTO_SHA512=y
+
SHA384 and SHA512 digest algorithms
+ +
CONFIG_CRYPTO_WP512=y
+
Whirlpool digest algorithms
+ +
CONFIG_CRYPTO_DES3_EDE_X86_64=y
+
DES and Triple DES EDE cipher algorithms
+ +
CONFIG_CRYPTO_SERPENT=y
+
Serpent cipher algorithm
+ +
CONFIG_CRYPTO_TWOFISH=y
+
Twofish cipher algorithm
+
+ +
+	    *   MD4 digest algorithm
+	    *   MD5 digest algorithm
+	    *   SHA1 digest algorithm
+	    *   Blowfish cipher algorithm
+	    *   AES cipher algorithms
+	    *   CAST5 (CAST-128) cipher algorithm
+	    *   CAST6 (CAST-256) cipher algorithm 
+	    *   Deflate compression algorithm
+	    
+ +

2.1.2.15 Virtualization

+ +
+
CONFIG_KVM=y
+
Kernel-based Virtual Machine (KVM) support
+ +
CONFIG_KVM_INTEL=y
+
KVM for Intel processors support
+
Provides support for KVM on Intel processors equipped with the VT extensions.
+ +
CONFIG_KVM_AMD=y
+
KVM for AMD processors support
+
Provides support for KVM on AMD processors equipped with the + AMD-V (SVM) extensions.
+ +
CONFIG_KVM_DEVICE_ASSIGNMENT=n
+
KVM legacy PCI device assignment support (DEPRECATED)
+ +
CONFIG_VHOST_NET=y
+
Host kernel accelerator for virtio net
+ +
CONFIG_VHOST_VSOCK=y
+
vhost virtio-vsock driver
+ +
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y
+
Cross-endian support for vhost
+
+ +

2.1.2.16 Library routines

+ +

2.1.3. Build

+ +

Make targets;

+ +
+        Other generic targets:
+          all             - Build all targets marked with [*]
+        * vmlinux         - Build the bare kernel
+        * modules         - Build all modules
+                            (default: ./usr)
+
+        Documentation targets:
+         Linux kernel internal documentation in different formats (Sphinx):
+          htmldocs        - HTML
+          latexdocs       - LaTeX
+          pdfdocs         - PDF
+          epubdocs        - EPUB
+          xmldocs         - XML
+          cleandocs       - clean all generated files
+
+          make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2
+          valid values for SPHINXDIRS are: development-process media gpu 80211
+
+          make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build
+          configuration. This is e.g. useful to build with nit-picking config.
+
+         Linux kernel internal documentation in different formats (DocBook):
+          htmldocs        - HTML
+          pdfdocs         - PDF
+          psdocs          - Postscript
+          xmldocs         - XML DocBook
+          mandocs         - man pages
+          installmandocs  - install man pages generated by mandocs
+          cleandocs       - clean all generated DocBook files
+
+        Architecture specific targets (x86):
+        * bzImage      - Compressed kernel image (arch/x86/boot/bzImage)
+          install      - Install kernel using
+                          (your) ~/bin/installkernel or
+                          (distribution) /sbin/installkernel or
+                          install to $(INSTALL_PATH) and run lilo
+          fdimage      - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)
+          fdimage144   - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)
+          fdimage288   - Create 2.8MB boot floppy image (arch/x86/boot/fdimage)
+          isoimage     - Create a boot CD-ROM image (arch/x86/boot/image.iso)
+                          bzdisk/fdimage*/isoimage also accept:
+                          FDARGS="..."  arguments for the booted kernel
+                          FDINITRD=file initrd for the booted kernel
+
+          i386_defconfig           - Build for i386
+          x86_64_defconfig         - Build for x86_64
+
+          make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build
+          make V=2   [targets] 2 => give reason for rebuild of target
+          make O=dir [targets] Locate all output files in "dir", including .config
+          make C=1   [targets] Check all c source with $CHECK (sparse by default)
+          make C=2   [targets] Force check of all c source with $CHECK
+          make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections
+          make W=n   [targets] Enable extra gcc checks, n=1,2,3 where
+                        1: warnings which may be relevant and do not occur too often
+                        2: warnings which occur quite often but may still be relevant
+                        3: more obscure warnings, can most likely be ignored
+                        Multiple levels can be combined with W=12 or W=123
+        
+ + +
+        $ make -j $(nproc) bzImage modules
+        
+ +

2.1.5. Install

+
+          modules_install - Install all modules to INSTALL_MOD_PATH (default: /)
+          firmware_install- Install all firmware to INSTALL_FW_PATH
+                            (default: $(INSTALL_MOD_PATH)/lib/firmware)
+          modules_prepare - Set up for building external modules
+          headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH
+        
+ +
+        $ sudo make modules_install
+        $ sudo cp arch/x86/boot/bzImage /boot/vmlinuz-4.9.86-gnu
+        $ sudo cp System.map /boot/System.map-4.9.86-gnu
+        
+ +

Update grub;

+ +
+        # grub-mkconfig -o /boot/grub/grub.cfg
+        
+ +

2.1.6. Remove

+ +
+        $ sudo rm -r /lib/modules/4.9.86-gnu
+        $ sudo rm /boot/vmlinuz-4.9.86-gnu
+        $ sudo rm /boot/System.map-4.9.86-gnu
+        
+ + Core OS Index +

This is part of the Tribu System Documentation. + Copyright (C) 2020 + Tribu Team. + See the file Gnu Free Documentation License + for copying conditions.

+ + + -- cgit