From 30574da1d494e74a0648152381dad871934fbb68 Mon Sep 17 00:00:00 2001
From: Silvino Silva Follow the instructions and then select the user you
want to revoque, where N is the UID of the user; The primary public key's ID is referenced in the pub
line after the key size, for example the key created above,
@@ -213,7 +215,6 @@
gpg --list-keys justin
-
Script in core/scripts/backup-system.sh use tldp
+ Script core/scripts/backup-system.sh use tldp
server backup
and restore
as a reference. Create hard disk image, there is different types,
this describes how to create a qcow2 type; You can mount disk image; Network configuration; This is part of the c9 Manual.
Copyright (C) 2016
--
cgit
From 1ee2bc2e2945df1a44a57205c8043a52009850c5 Mon Sep 17 00:00:00 2001
From: Silvino Silva Prepare disk or target location where new system will
be installed. Follow steps describe how to create efi and
separate partitions such as; boot, root, var, tmp,
- usr, ports, swap and home. There is no c9 manifesto but a collection of manifestos found on the
- Internet that share same vision. Hope you share the same vision.3.1 Edit key
+ 3.1. Edit key
$ gpg --edit-key KEYID
adduid
+ 3.2. Revoke key
+ $ gpg --edit-key KEYID
uid N
revuid
save
@@ -161,7 +163,7 @@
$ gpg --armor --output user.asc --export 'User Name'
- 3.2. Export to keyserver
+ 4.2. Export to keyserver
5. Encrypt, decrypt and signing
5.1. Encrypt file
--
cgit
From 1b941827ad765bd252e4a27a460dc485c872991c Mon Sep 17 00:00:00 2001
From: Silvino Silva 1. Create Backup
- Qemu
- Kernel configuration
+ 1. Host System
# usermod -a -G kvm c9admin
# usermod -a -G kvm username
- Disk images
+ 2. Disk images
-
-
- $ qemu-img create -f qcow2 crux-img.qcow2 20G
+ $ qemu-img create -f qcow2 crux-img.qcow2 15G
2. Network
@@ -79,9 +78,8 @@
- Network configuration
- Tap interfaces
+ 2.1. Tap interfaces
KERNEL=="tun", GROUP="kvm", MODE="0660", OPTIONS+="static_node=net/tun"
@@ -137,6 +135,7 @@
# tcpdump tap0
+
Tools Index
/boot/efi
diff --git a/host.html b/host.html
index 9a2ca1c..01aaf4f 100644
--- a/host.html
+++ b/host.html
@@ -60,7 +60,7 @@
c9 Manifesto
From + Sternececk.net;
+ ++ Every citizen, regardless of their economic circumstances, + should be able to share the benefits of the Information Age - + including better communications, greater participation, + electronic life long learning, and e-commerce. + To achieve this they should have access to local community + technology centres, plus public online forums and services + to create an online community. The centres will provide + technical support and help 'on the ground', the forums will + be 'virtual spaces' for online communities related to localities. +
Load modules, in this case kvm of intel cpu;
+ ++ # modprobe -a kvm-intel tun virtio ++ +
Add users to kvm group;
+
# usermod -a -G kvm c9admin
# usermod -a -G kvm username
@@ -42,40 +50,51 @@
$ sudo qemu-nbd -c /dev/nbd0 /crux-img.qcow2
- To disconnect image disk (ndb); +
To disconnect image disk (ndb);
$ sudo qemu-nbd -d /dev/nbd0
- You can use image as a normal disk, example how +
Information about preparing + partitions + and storage administration. + You can use image as a normal disk, example how to use parted to create a gpt system table;
# parted /dev/nbd0
(parted) mklabel gpt
+ (parted) mkpart ext4 0% 100%
+ (parted) set 1 boot on
- More information about - gpt partition table. -
++ # kpartx -a -s -l -u /dev/nbd0 +-
If partitions are on qcow2 image then setup partitions;
++ # mkfs.ext4 /dev/mapper/nbd0p1 ++ +
Mount partition;
- # kpartx -a -s -l /dev/nbd0
+ # mount /dev/mapper/nbd0p1
Network configuration;
+
- # tunctl -u username -g kvm
+ # tunctl -u username -g kvm -t tap0
Set permissions to existing tap interface;
@@ -102,12 +121,24 @@Manual creation of tap interface;
-
- # ip tuntap add name tap0 mode tap
+
+ # ip tuntap add name tap0 mode tap
# chmod 0666 /dev/tap0
# chown root:username /dev/tap0
- # ip link show
-
+
+
+ + # ip addr add 10.0.2.1/24 dev tap0 + # ip link set dev tap0 up + # ip link show ++ +
+ # sysctl -w net.ipv4.ip_forward=1 + # iptables -t nat -A POSTROUTING -s 10.0.2.0/24 -o eth0 -j MASQUERADE ++ +
Start qemu with 512 of ram, mydisk.img as disk and boot from iso
@@ -117,25 +148,19 @@ -m 512 \ -boot d -cdrom image.iso \ -hda mydisk.img - +Start qemu with 1024 of ram, network configured using tap0 interface device no host and boot from crux.qcow2;
-- $ qemu-system-x86_64 \ - -enable-kvm \ - -m 1024 \ - -hda c9/local/crux.qcow2 \ - -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no ++ $ qemu-system-x86_64 \ + -enable-kvm \ + -m 1024 \ + -hda c9/local/crux.qcow2 \ + -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no-On host machine test network;
- -- # tcpdump tap0 -- Tools IndexThis is part of the c9 Manual. Copyright (C) 2016 -- cgit