Installation of minimal Crux 3.4 Gnu\Linux system, with selected packages from core, opt and contrib ports. Process of installation documented can be executed from iso or from existing gnu\linux installation. Read Hand book 3.4, .
If you are booting from crux iso and is not your keyboard layout of choice run;
# loadkeys dvorak
Visit crux download page for more notes before downloading iso. Script setup-iso.sh downloads iso from master repo and checks md5sum.
$ curl -k -O https://serverop.de/crux/crux-3.4/iso/crux-3.4.iso
$ curl -k -O https://serverop.de/crux/crux-3.4/iso/crux-3.4.md5
$ md5sum crux-3.4.iso
73bf4d301e2dcfb0636cb7fc2a9e8fde crux-3.4.iso
Prepare disk or target location where new system will be installed. Follow steps describe how to create efi and separate partitions such as; bios grub, EFI, boot, root, var, usr, swap and home. For more information about gpt partitions table read devil-detail grub2 on gpt. Script setup-target.sh creates follow partitions;
Create gpt label and set unit size to use;
(parted) mklabel gpt
(parted) unit mib
Partition used by grub boot loader. Partition size 2M;
mkpart primary 2 4
name 1 grub
set 1 bios_grub on
EFI System Partition, ESP type EF00. Partition with between 500M and 100M is recommended for standard installations. Partition size 128M;
(parted) mkpart ESP fat32 4 132
(parted) name 2 efi
(parted) set 2 boot on
Boot partition. Partition with 1G provide room for kernels and bootable iso's that can be directly boot from grub (without root partition). Partition size 1G;
(parted) mkpart primary ext4 132 1132
(parted) name 3 boot
Core collection installation on root partition uses approximately 2G. Partition with 8G-20G is recommended for a server or desktop with dedicated ports partition or using only compiled packages. Partition size 20G;
(parted) mkpart primary ext4 1132 21132
(parted) name 4 root
Var partition is recommended 1G-5G depending on how system is configured. Partition size 2G;
(parted) mkpart primary ext4 21132 23132
(parted) name 5 var
Swap partition general advice is to have the same size as memory ram, ports system will be configured to build on ram. To build firefox is necessary at least 34G. Partition size 4G;
Is better to create swap partition later using lvm.
(parted) mkpart primary linux-swap 23132 27132
(parted) name 6 swap
Home partition on desktop fill the rest of disk space while on server this partition can be unnecessary. Fill the rest of disk space;
Is better to create home partition later using lvm.
(parted) mkpart primary ext4 27132 100%
(parted) name 7 home
$ sudo mkfs.fat -F 32 /dev/sda2
$ sudo mkfs.ext4 /dev/sda3
$ sudo mkfs.ext4 /dev/sda4
$ sudo mkfs.ext4 /dev/sda5
$ sudo mkswap /dev/sda6
$ sudo mkfs.ext4 /dev/sda7
From now on script setup-install.sh create file systems, install packages, configure host metadata and setup ports;
Export target root directory you want to install;
$ export CHROOT=/mnt
If you are installing to a directory and not partitions you don't need to mount;
$ sudo mount $BLK_ROOT $CHROOT
Create follow directories;
$ sudo mkdir -p $CHROOT/boot
$ sudo mkdir -p $CHROOT/var
$ sudo mkdir -p $CHROOT/usr
$ sudo mkdir -p $CHROOT/media
$ sudo mkdir -p $CHROOT/home
$ sudo mkdir -p $CHROOT/dev
$ sudo mkdir -p $CHROOT/tmp
$ sudo mkdir -p $CHROOT/proc
$ sudo mkdir -p $CHROOT/sys
If partition layout is different or target is a directory is not necessary to mount, create only the directories;
$ sudo mount $BLK_BOOT $CHROOT/boot
$ sudo mkdir -p $CHROOT/boot/efi
$ sudo mount $BLK_EFI $CHROOT/boot/efi
$ sudo mount $BLK_VAR $CHROOT/var
$ sudo mkdir -p $CHROOT/var/lib/pkg
$ sudo mount $BLK_HOME $CHROOT/home
Activate Chroot;
$ sudo mount --bind /dev $CHROOT/dev
$ sudo mount -vt devpts devpts $CHROOT/dev/pts
$ sudo mount -vt tmpfs shm $CHROOT/dev/shm
$ sudo mount -vt proc proc $CHROOT/proc
$ sudo mount -vt sysfs sysfs $CHROOT/sys
Mount iso or copy packages to target /mnt directory;
# modprobe isofs
# modprobe loop
# mount -o loop crux-3.4.iso $CHROOT/media
Create file $CHROOT/core.lst containing list of binary packages present in $CHROOT/media/crux/core/;
$ sudo for p in $CHROOT/media/crux/core/*; do echo $p << $CHROOT/core.lst; done
Install temporary pkgadd on $CHROOT;
$ sudo tar xf /media/crux/core/pkgutils#5.40-1.pkg.tar.xz usr/bin/pkgadd -O > $CHROOT/pkgadd
$ sudo chmod +x $CHROOT/pkgadd
Edit $CHROOT/core.lst with your preferences, you can remove or add packages from opt collection. Remove lilo if you want grub.
Create package database, it will contain a list of installed packages files.
$ sudo touch $CHROOT/var/lib/pkg/db
Install all packages listed in $CHROOT/core.lst;
$ su
# cd $CHROOT
while read line; do
printf "Installing $line;\n"
$CHROOT/pkgadd -f -r $CHROOT $line
done < core.lst
Install additional ports like wireless-tools, grub2 and fakeroot;
cp $CHROOT/media/crux/opt/* $CHROOT/usr/ports/packages
cp $CHROOT/media/crux/xorg/* $CHROOT/usr/ports/packages
# chroot $CHROOT /bin/bash
pkgadd /usr/ports/packages/fakeroot#*
pkgadd /usr/ports/packages/dbus#*
pkgadd /usr/ports/packages/expat#*
pkgadd /usr/ports/packages/libnl#*
pkgadd /usr/ports/packages/libpng#*
pkgadd /usr/ports/packages/freetype#*
pkgadd /usr/ports/packages/libffi#*
pkgadd /usr/ports/packages/sqlite3#*
pkgadd /usr/ports/packages/python#*
pkgadd /usr/ports/packages/glib#*
pkgadd /usr/ports/packages/grub2#*
pkgadd /usr/ports/packages/grub2-efi#*
pkgadd /usr/ports/packages/wireless-tools#*
pkgadd /usr/ports/packages/wpa_supplicant#*
pkgadd /usr/ports/packages/lvm2#*
pkgadd /usr/ports/packages/mdadm#*
pkgadd /usr/ports/packages/efivar#*
pkgadd /usr/ports/packages/efibootmgr#*
pkgadd /usr/ports/packages/dosfstools#*
# exit
$ sudo rm $CHROOT/pkgadd
$ sudo rm $CHROOT/core.lst
Create c9 ports;
$ sudo mkdir $CHROOT/usr/ports/c9-ports
Copy ports from c9-doc/core/ports;
$ sudo cp -r ports/* $CHROOT/usr/ports/c9-ports/
$ sudo cp /etc/resolv.conf $CHROOT/etc
$ sudo cp $CHROOT/media/crux/handbook.txt $CHROOT/home/root/
Copy skeletons from c9-doc/core/conf;
$ sudo cp -R conf/skel $CHROOT/etc/
Core OS Index
This is part of the Hive System Documentation. Copyright (C) 2018 Hive Team. See the file Gnu Free Documentation License for copying conditions.