|
|
//: SubX mostly deals with instructions operating on 32-bit operands, but we
//: still need to deal with raw bytes for strings and so on.
//: Unfortunately the register encodings when dealing with bytes are a mess.
//: We need a special case for them.
:(code)
string rname_8bit(uint8_t r) {
switch (r) {
case 0: return "AL"; // lowest byte of EAX
case 1: return "CL"; // lowest byte of ECX
case 2: return "DL"; // lowest byte of EDX
case 3: return "BL"; // lowest byte of EBX
case 4: return "AH"; // second lowest byte of EAX
case 5: return "CH"; // second lowest byte of ECX
case 6: return "DH"; // second lowest byte of EDX
case 7: return "BH"; // second lowest byte of EBX
default: raise << "invalid 8-bit register " << r << '\n' << end(); return "";
}
}
uint8_t* effective_byte_address(uint8_t modrm) {
uint8_t mod = (modrm>>6);
uint8_t rm = modrm & 0x7;
if (mod == 3) {
// select an 8-bit register
trace(Callstack_depth+1, "run") << "r/m8 is " << rname_8bit(rm) << end();
return reg_8bit(rm);
}
// the rest is as usual
return mem_addr_u8(effective_address_number(modrm));
}
uint8_t* reg_8bit(uint8_t rm) {
uint8_t* result = reinterpret_cast<uint8_t*>(&Reg[rm & 0x3].i); // _L register
if (rm & 0x4)
++result; // _H register; assumes host is little-endian
return result;
}
:(before "End Initialize Op Names")
put_new(Name, "88", "copy r8 to r8/m8-at-r32");
:(code)
void test_copy_r8_to_mem_at_r32() {
Reg[EBX].i = 0x224488ab;
Reg[EAX].i = 0x2000;
run(
"== code 0x1\n"
// op ModR/M SIB displacement immediate
" 88 18 \n" // copy BL to the byte at *EAX
// ModR/M in binary: 00 (indirect mode) 011 (src BL) 000 (dest EAX)
"== data 0x2000\n"
"f0 cc bb aa\n"
);
CHECK_TRACE_CONTENTS(
"run: copy BL to r8/m8-at-r32\n"
"run: effective address is 0x00002000 (EAX)\n"
"run: storing 0xab\n"
);
CHECK_EQ(0xaabbccab, read_mem_u32(0x2000));
}
:(before "End Single-Byte Opcodes")
case 0x88: { // copy r8 to r/m8
const uint8_t modrm = next();
const uint8_t rsrc = (modrm>>3)&0x7;
trace(Callstack_depth+1, "run") << "copy " << rname_8bit(rsrc) << " to r8/m8-at-r32" << end();
// use unsigned to zero-extend 8-bit value to 32 bits
uint8_t* dest = reinterpret_cast<uint8_t*>(effective_byte_address(modrm));
const uint8_t* src = reg_8bit(rsrc);
*dest = *src; // Read/write multiple elements of vector<uint8_t> at once. Assumes sizeof(int) == 4 on the host as well.
trace(Callstack_depth+1, "run") << "storing 0x" << HEXBYTE << NUM(*dest) << end();
break;
}
//:
:(before "End Initialize Op Names")
put_new(Name, "8a", "copy r8/m8-at-r32 to r8");
:(code)
void test_copy_mem_at_r32_to_r8() {
Reg[EBX].i = 0xaabbcc0f; // one nibble each of lowest byte set to all 0s and all 1s, to maximize value of this test
Reg[EAX].i = 0x2000;
run(
"== code 0x1\n"
// op ModR/M SIB displacement immediate
" 8a 18 \n" // copy just the byte at *EAX to BL
// ModR/M in binary: 00 (indirect mode) 011 (dest EBX) 000 (src EAX)
"== data 0x2000\n"
"ab ff ff ff\n" // 0xab with more data in following bytes
);
CHECK_TRACE_CONTENTS(
"run: copy r8/m8-at-r32 to BL\n"
"run: effective address is 0x00002000 (EAX)\n"
"run: storing 0xab\n"
// remaining bytes of EBX are *not* cleared
"run: EBX now contains 0xaabbccab\n"
);
}
:(before "End Single-Byte Opcodes")
case 0x8a: { // copy r/m8 to r8
const uint8_t modrm = next();
const uint8_t rdest = (modrm>>3)&0x7;
trace(Callstack_depth+1, "run") << "copy r8/m8-at-r32 to " << rname_8bit(rdest) << end();
// use unsigned to zero-extend 8-bit value to 32 bits
const uint8_t* src = reinterpret_cast<uint8_t*>(effective_byte_address(modrm));
uint8_t* dest = reg_8bit(rdest);
trace(Callstack_depth+1, "run") << "storing 0x" << HEXBYTE << NUM(*src) << end();
*dest = *src; // Read/write multiple elements of vector<uint8_t> at once. Assumes sizeof(int) == 4 on the host as well.
const uint8_t rdest_32bit = rdest & 0x3;
trace(Callstack_depth+1, "run") << rname(rdest_32bit) << " now contains 0x" << HEXWORD << Reg[rdest_32bit].u << end();
break;
}
:(code)
void test_cannot_copy_byte_to_ESP_EBP_ESI_EDI() {
Reg[ESI].u = 0xaabbccdd;
Reg[EBX].u = 0x11223344;
run(
"== code 0x1\n"
// op ModR/M SIB displacement immediate
" 8a f3 \n" // copy just the byte at *EBX to 8-bit register '6'
// ModR/M in binary: 11 (direct mode) 110 (dest 8-bit 'register 6') 011 (src EBX)
);
CHECK_TRACE_CONTENTS(
// ensure 8-bit register '6' is DH, not ESI
"run: copy r8/m8-at-r32 to DH\n"
"run: storing 0x44\n"
);
// ensure ESI is unchanged
CHECK_EQ(Reg[ESI].u, 0xaabbccdd);
}
//:
:(before "End Initialize Op Names")
put_new(Name, "c6", "copy imm8 to r8/m8-at-r32 (mov)");
:(code)
void test_copy_imm8_to_mem_at_r32() {
Reg[EAX].i = 0x2000;
run(
"== code 0x1\n"
// op ModR/M SIB displacement immediate
" c6 00 dd \n" // copy to the byte at *EAX
// ModR/M in binary: 00 (indirect mode) 000 (unused) 000 (dest EAX)
"== data 0x2000\n"
"f0 cc bb aa\n"
);
CHECK_TRACE_CONTENTS(
"run: copy imm8 to r8/m8-at-r32\n"
"run: effective address is 0x00002000 (EAX)\n"
"run: storing 0xdd\n"
);
CHECK_EQ(0xaabbccdd, read_mem_u32(0x2000));
}
:(before "End Single-Byte Opcodes")
case 0xc6: { // copy imm8 to r/m8
const uint8_t modrm = next();
const uint8_t src = next();
trace(Callstack_depth+1, "run") << "copy imm8 to r8/m8-at-r32" << end();
trace(Callstack_depth+1, "run") << "imm8 is 0x" << HEXWORD << NUM(src) << end();
const uint8_t subop = (modrm>>3)&0x7; // middle 3 'reg opcode' bits
if (subop != 0) {
cerr << "unrecognized subop for opcode c6: " << NUM(subop) << " (only 0/copy currently implemented)\n";
exit(1);
}
// use unsigned to zero-extend 8-bit value to 32 bits
uint8_t* dest = reinterpret_cast<uint8_t*>(effective_byte_address(modrm));
*dest = src; // Write multiple elements of vector<uint8_t> at once. Assumes sizeof(int) == 4 on the host as well.
trace(Callstack_depth+1, "run") << "storing 0x" << HEXBYTE << NUM(*dest) << end();
break;
}
|