path: root/subx/064write-byte.subx

# write-byte: write a single byte to a buffered-file. The write may be buffered.
# flush: write out any buffered writes to disk.
#
# TODO: Come up with a way to signal failure to write to disk. This is hard
# since the failure may impact previous calls that were buffered.

== data

# The buffered file for standard output.
Stdout:
    # file descriptor or (address stream)
    1/imm32  # standard output
    # current write index
    0/imm32
    # current read index
    0/imm32
    # length
    8/imm32
    # data
    00 00 00 00 00 00 00 00  # 8 bytes

# TODO: 8 bytes is too small. We'll need to grow the buffer for efficiency. But
# I don't want to type in 1024 bytes here.

== code
#   instruction                     effective address                                                   register    displacement    immediate
# . op          subop               mod             rm32          base        index         scale       r32
# . 1-3 bytes   3 bits              2 bits          3 bits        3 bits      3 bits        2 bits      2 bits      0/1/2/4 bytes   0/1/2/4 bytes

# Write lower byte of 'n' to 'f'.
write-byte:  # f : (address buffered-file), n : int -> <void>
    # . prolog
    55/push-EBP
    89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
    # . save registers
    51/push-ECX
    57/push-EDI
    # EDI = f
    8b/copy                         1/mod/*+disp8   5/rm32/EBP    .           .             .           7/r32/EDI   8/disp8         .                 # copy *(EBP+8) to EDI
    # ECX = f->write
    8b/copy                         1/mod/*+disp8   7/rm32/EDI    .           .             .           1/r32/ECX   4/disp8         .                 # copy *(EDI+4) to ECX
    # if (f->write >= f->length) flush and clear f's stream
    3b/compare                      1/mod/*+disp8   7/rm32/EDI    .           .             .           1/r32/ECX   0xc/disp8       .                 # compare ECX with *(EDI+12)
    7c/jump-if-lesser  $write-byte:to-stream/disp8
    # . flush(f)
    # . . push args
    57/push-EDI
    # . . call
    e8/call  flush/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # . clear-stream(stream = f+4)
    # . . push args
    8d/copy-address                 1/mod/*+disp8   7/rm32/EDI    .           .             .           0/r32/EAX   4/disp8         .                 # copy EDI+4 to EAX
    50/push-EAX
    # . . call
    e8/call  clear-stream/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # . f->write must now be 0; update its cache at ECX
    31/xor                          3/mod/direct    1/rm32/ECX    .           .             .           1/r32/ECX   .               .                 # clear ECX
$write-byte:to-stream:
    # write to stream
    # f->data[f->write] = LSB(n)
    31/xor                          3/mod/direct    0/rm32/EAX    .           .             .           0/r32/EAX   .               .                 # clear EAX
    8a/copy-byte                    1/mod/*+disp8   5/rm32/EBP    .           .             .           0/r32/AL    0xc/disp8       .                 # copy byte at *(EBP+12) to AL
    88/copy-byte                    1/mod/*+disp8   4/rm32/sib    7/base/EDI  1/index/ECX   .           0/r32/AL    0x10/disp8      .                 # copy AL to *(EDI+ECX+16)
    # ++f->write
    ff          0/subop/increment   1/mod/*+disp8   7/rm32/EDI    .           .             .           .           4/disp8         .                 # increment *(EDI+4)
$write-byte:end:
    # . restore registers
    5f/pop-to-EDI
    59/pop-to-ECX
    # . epilog
    89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
    5d/pop-to-EBP
    c3/return

flush:  # f : (address buffered-file) -> <void>
    # . prolog
    55/push-EBP
    89/copy                         3/mod/direct    5/rm32/EBP    .           .             .           4/r32/ESP   .               .                 # copy ESP to EBP
    # . save registers
    50/push-EAX
    51/push-ECX
    # EAX = f
    8b/copy                         1/mod/*+disp8   5/rm32/EBP    .           .             .           0/r32/EAX   8/disp8         .                 # copy *(EBP+8) to EAX
    # write-stream(f->fd, data = f+4)
      # . . push args
    8d/copy-address                 1/mod/*+disp8   0/rm32/EAX    .           .             .           1/r32/ECX   4/disp8         .                 # copy EAX+4 to ECX
    51/push-ECX
    ff          6/subop/push        0/mod/indirect  0/rm32/EAX    .           .             .           .           .               .                 # push *EAX
      # . . call
    e8/call  write-stream/disp32
      # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
$flush:end:
    # . restore registers
    59/pop-to-ECX
    58/pop-to-EAX
    # . epilog
    89/copy                         3/mod/direct    4/rm32/ESP    .           .             .           5/r32/EBP   .               .                 # copy EBP to ESP
    5d/pop-to-EBP
    c3/return

# - tests

test-write-byte-single:
    # - check that write-byte writes to first byte of 'file'
    # setup
    # . clear-stream(_test-stream)
    # . . push args
    68/push  _test-stream/imm32
    # . . call
    e8/call  clear-stream/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # . clear-stream(_test-buffered-file+4)
    # . . push args
    b8/copy-to-EAX  _test-buffered-file/imm32
    05/add-to-EAX  4/imm32
    50/push-EAX
    # . . call
    e8/call  clear-stream/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # write-byte(_test-buffered-file, 'A')
    # . . push args
    68/push  0x41/imm32
    68/push  _test-buffered-file/imm32
    # . . call
    e8/call  write-byte/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
    # flush(_test-buffered-file)
    # . . push args
    68/push  _test-buffered-file/imm32
    # . . call
    e8/call  flush/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # check-stream-equal(_test-stream, "A", msg)
    # . . push args
    68/push  "F - test-write-byte-single"/imm32
    68/push  "A"/imm32
    68/push  _test-stream/imm32
    # . . call
    e8/call  check-stream-equal/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
    # . end
    c3/return

test-write-byte-multiple-flushes:
    # - check that write-byte correctly flushes buffered data
    # setup
    # . clear-stream(_test-stream)
    # . . push args
    68/push  _test-stream/imm32
    # . . call
    e8/call  clear-stream/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # . clear-stream(_test-buffered-file+4)
    # . . push args
    b8/copy-to-EAX  _test-buffered-file/imm32
    05/add-to-EAX  4/imm32
    50/push-EAX
    # . . call
    e8/call  clear-stream/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # fill up the buffer for _test-buffered-file
    # . write(_test-buffered-file+4, 'abcdef')
    # . . push args
    68/push  "abcdef"/imm32
    b8/copy-to-EAX  _test-buffered-file/imm32
    05/add-to-EAX  4/imm32
    50/push-EAX
    # . . call
    e8/call  write/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
    # write-byte(_test-buffered-file, 'g')
    # . . push args
    68/push  0x67/imm32
    68/push  _test-buffered-file/imm32
    # . . call
    e8/call  write-byte/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               8/imm32           # add to ESP
    # flush(_test-buffered-file)
    # . . push args
    68/push  _test-buffered-file/imm32
    # . . call
    e8/call  flush/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               4/imm32           # add to ESP
    # check-stream-equal(_test-stream, "abcdef", msg)
    # . . push args
    68/push  "F - test-write-byte-multiple-flushes: 1"/imm32
    68/push  "abcdefg"/imm32
    68/push  _test-stream/imm32
    # . . call
    e8/call  check-stream-equal/disp32
    # . . discard args
    81          0/subop/add         3/mod/direct    4/rm32/ESP    .           .             .           .           .               0xc/imm32         # add to ESP
    # . end
    c3/return

# . . vim:nowrap:textwidth=0