# Port of https://github.com/akkartik/crenshaw/blob/master/tutor2.1.pas
# which corresponds to the section "single digits" in https://compilers.iecc.com/crenshaw/tutor2.txt
# except that we support hex digits.
#
# To run (from the subx/ directory):
# $ ./subx translate *.subx apps/crenshaw2-1.subx -o apps/crenshaw2-1
# $ echo '3' |./subx run apps/crenshaw2-1
# Expected output:
# # syscall(exit, 3)
# bb/copy-to-EBX 3/imm32
# b8/copy-to-EAX 1/imm32/exit
# cd/syscall 0x80/imm8
#
# To run the generated output:
# $ echo '3' |./subx run apps/crenshaw2-1 > z1.subx
# $ ./subx translate z1.subx -o z1
# $ ./subx run z1
# $ echo $?
# 3
#
# Stdin must contain just a single hex digit. Other input will print an error:
# $ echo 'xyz' |./subx run apps/crenshaw2-1
# Error: integer expected
#
# Names in this file sometimes follow Crenshaw's original rather than my usual
# naming conventions.
== code
# instruction effective address register displacement immediate
# . op subop mod rm32 base index scale r32
# . 1-3 bytes 3 bits 2 bits 3 bits 3 bits 3 bits 2 bits 2 bits 0/1/2/4 bytes 0/1/2/4 bytes
#? # for debugging: run a single test; don't bother setting status code
#? e8/call test-get-num-reads-single-digit/disp32
#? eb/jump $main:end/disp8
# main: run tests if necessary, call 'compile' if not
# . prolog
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# - if argc > 1 and argv[1] == "test", then return run_tests()
# . argc > 1
81 7/subop/compare 1/mod/*+disp8 5/rm32/EBP . . . . 0/disp8 1/imm32 # compare *EBP
7e/jump-if-lesser-or-equal $run-main/disp8
# . argv[1] == "test"
# . . push args
68/push "test"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8)
# . . call
e8/call kernel-string-equal?/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . check result
3d/compare-EAX 1/imm32
75/jump-if-not-equal $run-main/disp8
# . run-tests()
e8/call run-tests/disp32
8b/copy 0/mod/indirect 5/rm32/.disp32 . . 3/r32/EBX Num-test-failures/disp32 # copy *Num-test-failures to EBX
eb/jump $main:end/disp8
$run-main:
# - otherwise read a program from stdin and emit its translation to stdout
# var ed/EAX : exit-descriptor
81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP
89/copy 3/mod/direct 0/rm32/EAX . . . 4/r32/ESP . . # copy ESP to EAX
# configure ed to really exit()
# . ed->target = 0
c7 0/subop/copy 0/mod/direct 0/rm32/EAX . . . . . 0/imm32 # copy to *EAX
# return compile(Stdin, 1/stdout, 2/stderr, ed)
# . . push args
50/push-EAX/ed
68/push 2/imm32/stderr
68/push 1/imm32/stdout
68/push Stdin/imm32
# . . call
e8/call compile/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0x10/imm32 # add to ESP
# . syscall(exit, 0)
bb/copy-to-EBX 0/imm32
$main:end:
b8/copy-to-EAX 1/imm32/exit
cd/syscall 0x80/imm8
# the main entry point
compile: # in : (address buffered-file), out : fd or (address stream), err : fd or (address stream), ed : (address exit-descriptor) -> <void>
# . prolog
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# . save registers
50/push-EAX
51/push-ECX
# prime the pump
# . Look = get-char(in)
# . . push args
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8)
# . . call
e8/call get-char/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# var num/ECX : (address stream) on the stack
# Numbers can be 32 bits or 8 hex bytes long. One of them will be in 'Look', so we need space for 7 bytes.
# Sizing the stream just right buys us overflow-handling for free inside 'get-num'.
# Add 12 bytes for 'read', 'write' and 'length' fields, for a total of 19 bytes, or 0x13 in hex.
# The stack pointer is no longer aligned, so dump_stack() can be misleading past this point.
81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 0x13/imm32 # subtract from ESP
89/copy 3/mod/direct 1/rm32/ECX . . . 4/r32/ESP . . # copy ESP to ECX
# initialize the stream
# . num->length = 7
c7 0/subop/copy 1/mod/*+disp8 1/rm32/ECX . . . . 8/disp8 7/imm32 # copy to *(ECX+8)
# . clear-stream(num)
# . . push args
51/push-ECX
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# read a digit from 'in' into 'num'
# . get-num(in, num, err, ed)
# . . push args
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x14/disp8 . # push *(EBP+20)
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16)
51/push-ECX/num
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8)
# . . call
e8/call get-num/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0x10/imm32 # add to ESP
# render 'num' into the following template on 'out':
# bb/copy-to-EBX _num_
# b8/copy-to-EAX 1/imm32/exit
# cd/syscall 0x80/imm8
#
# . write(out, "bb/copy-to-EBX ")
# . . push args
68/push "bb/copy-to-EBX "/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write-stream(out, num)
# . . push args
51/push-ECX/num
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write(out, Newline)
# . . push args
68/push Newline/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write(out, "b8/copy-to-EAX 1/imm32/exit")
# . . push args
68/push "b8/copy-to-EAX 1/imm32/exit"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write(out, Newline)
# . . push args
68/push Newline/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write(out, "cd/syscall 0x80/imm8")
# . . push args
68/push "cd/syscall 0x80/imm8"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# . write(out, Newline)
# . . push args
68/push Newline/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
$compile:end:
# . restore registers
59/pop-to-ECX
58/pop-to-EAX
# . epilog
89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP
5d/pop-to-EBP
c3/return
# Read a single digit into 'out'. Abort if there are none, or if there is no space in 'out'.
# Input comes from the global variable 'Look', and we leave the next byte from
# 'in' into it on exit.
get-num: # in : (address buffered-file), out : (address stream), err : fd or (address stream), ed : (address exit-descriptor) -> <void>
# pseudocode:
# if (!is-digit?(Look)) expected(ed, err, "integer")
# if (out->write >= out->length)
# write(err, "Error: too many digits in number\n")
# stop(ed, 1)
# out->data[out->write] = LSB(Look)
# ++out->write
# Look = get-char(in)
#
# registers:
# in: ESI
# out: EDI
# out->write: ECX (cached copy; need to keep in sync)
# out->length: EDX
# temporaries: EAX, EBX
# We can't allocate Look to a register because it gets written implicitly in
# get-char in each iteration of the loop. (Thereby demonstrating that it's
# not the right interface for us. But we'll keep it just to follow Crenshaw.)
#
# . prolog
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# - if (is-digit?(Look)) expected(ed, err, "integer")
# . EAX = is-digit?(Look)
# . . push args
ff 6/subop/push 0/mod/indirect 5/rm32/.disp32 . . . Look/disp32 . # push *Look
# . . call
e8/call is-digit?/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . if (EAX == 0)
3d/compare-EAX 0/imm32
75/jump-if-not-equal $get-num:main/disp8
# . expected(ed, err, "integer")
# . . push args
68/push "integer"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16)
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x14/disp8 . # push *(EBP+20)
# . . call
e8/call expected/disp32 # never returns
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP
$get-num:main:
# - otherwise read a digit
# . save registers
50/push-EAX
51/push-ECX
52/push-EDX
53/push-EBX
56/push-ESI
57/push-EDI
# read necessary variables to registers
# ESI = in
8b/copy 1/mod/*+disp8 5/rm32/EBP . . . 6/r32/ESI 8/disp8 . # copy *(EBP+8) to ESI
# EDI = out
8b/copy 1/mod/*+disp8 5/rm32/EBP . . . 7/r32/EDI 0xc/disp8 . # copy *(EBP+12) to EDI
# ECX = out->write
8b/copy 0/mod/indirect 7/rm32/EDI . . . 1/r32/ECX . . # copy *EDI to ECX
# EDX = out->length
8b/copy 1/mod/*+disp8 7/rm32/EDI . . . 2/r32/EDX 8/disp8 . # copy *(EDI+8) to EDX
# if (out->write >= out->length) error
39/compare 3/mod/direct 2/rm32/EDX . . . 1/r32/ECX . . # compare EDX with ECX
7d/jump-if-lesser $get-num:stage2/disp8
# . error(ed, err, msg) # TODO: show full number
# . . push args
68/push "get-num: too many digits in number"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16)
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x14/disp8 . # push *(EBP+20)
# . . call
e8/call error/disp32 # never returns
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP
$get-num:stage2:
# out->data[out->write] = LSB(Look)
8d/copy-address 1/mod/*+disp8 4/rm32/sib 7/base/EDI 1/index/ECX . 3/r32/EBX 0xc/disp8 . # copy EDI+ECX+12 to EBX
8b/copy 0/mod/indirect 5/rm32/.disp32 . . 0/r32/EAX Look/disp32 . # copy *Look to EAX
88/copy-byte 0/mod/indirect 3/rm32/EBX . . . 0/r32/AL . . # copy byte at AL to *EBX
# ++out->write
41/increment-ECX
# Look = get-char(in)
# . . push args
56/push-ESI
# . . call
e8/call get-char/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
$get-num:loop-end:
# persist necessary variables from registers
89/copy 0/mod/indirect 7/rm32/EDI . . . 1/r32/ECX . . # copy ECX to *EDI
$get-num:end:
# . restore registers
5f/pop-to-EDI
5e/pop-to-ESI
5b/pop-to-EBX
5a/pop-to-EDX
59/pop-to-ECX
58/pop-to-EAX
# . epilog
89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP
5d/pop-to-EBP
c3/return
test-get-num-reads-single-digit:
# - check that get-num returns first character if it's a digit
# This test uses exit-descriptors. Use EBP for setting up local variables.
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# clear all streams
# . clear-stream(_test-stream)
# . . push args
68/push _test-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-buffered-file+4)
# . . push args
b8/copy-to-EAX _test-buffered-file/imm32
05/add-to-EAX 4/imm32
50/push-EAX
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-output-stream)
# . . push args
68/push _test-output-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-error-stream)
# . . push args
68/push _test-error-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# initialize 'in'
# . write(_test-stream, "3")
# . . push args
68/push "3"/imm32
68/push _test-stream/imm32
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# initialize exit-descriptor 'ed' for the call to 'get-num' below
# . var ed/EAX : exit-descriptor
81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP
89/copy 3/mod/direct 0/rm32/EAX . . . 4/r32/ESP . . # copy ESP to EAX
# . tailor-exit-descriptor(ed, 16)
# . . push args
68/push 0x10/imm32/nbytes-of-args-for-get-num
50/push-EAX/ed
# . . call
e8/call tailor-exit-descriptor/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# prime the pump
# . get-char(_test-buffered-file)
# . . push args
68/push _test-buffered-file/imm32
# . . call
e8/call get-char/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# get-num(in, out, err, ed)
# . . push args
50/push-EAX/ed
68/push _test-error-stream/imm32
68/push _test-output-stream/imm32
68/push _test-buffered-file/imm32
# . . call
e8/call get-num/disp32
# registers except ESP may be clobbered at this point
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0x10/imm32 # add to ESP
# check-ints-equal(*_test-output-stream->data, '3', msg)
# . . push args
68/push "F - test-get-num-reads-single-digit"/imm32
68/push 0x33/imm32
b8/copy-to-EAX _test-output-stream/imm32
ff 6/subop/push 1/mod/*+disp8 0/rm32/EAX . . . . 0xc/disp8 . # push *(EAX+12)
# . . call
e8/call check-ints-equal/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP
# . reclaim locals
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
5d/pop-to-EBP
c3/return
test-get-num-aborts-on-non-digit-in-Look:
# - check that get-num returns first character if it's a digit
# This test uses exit-descriptors. Use EBP for setting up local variables.
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# clear all streams
# . clear-stream(_test-stream)
# . . push args
68/push _test-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-buffered-file+4)
# . . push args
b8/copy-to-EAX _test-buffered-file/imm32
05/add-to-EAX 4/imm32
50/push-EAX
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-output-stream)
# . . push args
68/push _test-output-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# . clear-stream(_test-error-stream)
# . . push args
68/push _test-error-stream/imm32
# . . call
e8/call clear-stream/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# initialize 'in'
# . write(_test-stream, "3")
# . . push args
68/push "3"/imm32
68/push _test-stream/imm32
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# initialize exit-descriptor 'ed' for the call to 'get-num' below
# . var ed/EAX : (address exit-descriptor)
81 5/subop/subtract 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # subtract from ESP
89/copy 3/mod/direct 0/rm32/EAX . . . 4/r32/ESP . . # copy ESP to EAX
# . tailor-exit-descriptor(ed, 16)
# . . push args
68/push 0x10/imm32/nbytes-of-args-for-get-num
50/push-EAX/ed
# . . call
e8/call tailor-exit-descriptor/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# *don't* prime the pump
# get-num(in, out, err, ed)
# . . push args
50/push-EAX/ed
68/push _test-error-stream/imm32
68/push _test-output-stream/imm32
68/push _test-buffered-file/imm32
# . . call
e8/call get-num/disp32
# registers except ESP may be clobbered at this point
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0x10/imm32 # add to ESP
# check that get-num tried to call exit(1)
# . check-ints-equal(ed->value, 2, msg) # i.e. stop was called with value 1
# . . push args
68/push "F - test-get-num-aborts-on-non-digit-in-Look"/imm32
68/push 2/imm32
# . . push ed->value
ff 6/subop/push 1/mod/*+disp8 0/rm32/EAX . . . . 4/disp8 . # push *(EAX+4)
# . . call
e8/call check-ints-equal/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 0xc/imm32 # add to ESP
# . reclaim locals
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
5d/pop-to-EBP
c3/return
## helpers
# write(f, "Error: "+s+" expected\n") then stop(ed, 1)
expected: # ed : (address exit-descriptor), f : fd or (address stream), s : (address array byte) -> <void>
# . prolog
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# write(f, "Error: ")
# . . push args
68/push "Error: "/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# write(f, s)
# . . push args
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0x10/disp8 . # push *(EBP+16)
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# write(f, " expected")
# . . push args
68/push " expected"/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# write(f, Newline)
# . . push args
68/push Newline/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 0xc/disp8 . # push *(EBP+12)
# . . call
e8/call write/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 8/imm32 # add to ESP
# stop(ed, 1)
# . . push args
68/push 1/imm32
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8)
# . . call
e8/call stop/disp32
# should never get past this point
$expected:dead-end:
# . epilog
89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP
5d/pop-to-EBP
c3/return
# read a byte from 'f', and save it in 'Look'
get-char: # f : (address buffered-file) -> <void>
# . prolog
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# . save registers
50/push-EAX
# read-byte(f)
# . . push args
ff 6/subop/push 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 . # push *(EBP+8)
# . . call
e8/call read-byte/disp32
# . . discard args
81 0/subop/add 3/mod/direct 4/rm32/ESP . . . . . 4/imm32 # add to ESP
# save EAX to Look
89/copy 0/mod/indirect 5/rm32/.disp32 . . 0/r32/EAX Look/disp32 . # copy EAX to *Look
$get-char:end:
# . restore registers
58/pop-to-EAX
# . epilog
89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP
5d/pop-to-EBP
c3/return
is-digit?: # c : int -> EAX : boolean
# . prolog
55/push-EBP
89/copy 3/mod/direct 5/rm32/EBP . . . 4/r32/ESP . . # copy ESP to EBP
# EAX = false
b8/copy-to-EAX 0/imm32
# if (c < '0') return false
81 7/subop/compare 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 0x30/imm32 # compare *(EBP+8)
7c/jump-if-lesser $is-digit?:end/disp8
# if (c > '9') return false
81 7/subop/compare 1/mod/*+disp8 5/rm32/EBP . . . . 8/disp8 0x39/imm32 # compare *(EBP+8)
7f/jump-if-greater $is-digit?:end/disp8
# otherwise return true
b8/copy-to-EAX 1/imm32
$is-digit?:end:
# . epilog
89/copy 3/mod/direct 4/rm32/ESP . . . 5/r32/EBP . . # copy EBP to ESP
5d/pop-to-EBP
c3/return
== data
Look: # (char)
00 00 00 00 # = 0
_test-output-stream:
# current write index
00 00 00 00
# current read index
00 00 00 00
# length (= 8)
08 00 00 00
# data
00 00 00 00 00 00 00 00 # 8 bytes
_test-error-stream:
# current write index
00 00 00 00
# current read index
00 00 00 00
# length (= 8)
08 00 00 00
# data
00 00 00 00 00 00 00 00 # 8 bytes
# . . vim:nowrap:textwidth=0