## Reference documentation on available primitives
### Data Structures
For memory safety, the following data structures are opaque and only modified
using functions described further down. I still find it useful to understand
how they work under the hood.
- Handles: addresses to objects allocated on the heap. They're augmented with
book-keeping to guarantee memory-safety, and so cannot be stored in registers.
See [mu.md](mu.md) for details, but in brief:
- You need `addr` values to access data they point to.
- You can't store `addr` values in other types. They're temporary.
- You can store `handle` values in other types.
- To convert `handle` to `addr`, use `lookup`.
- Reclaiming memory (currently unimplemented) invalidates all `addr`
values.
- Arrays: size-prefixed regions of memory containing multiple elements of a
single type. Contents are preceded by 4 bytes (32 bits) containing the
`size` of the array in bytes.
- Slices: a pair of 32-bit addresses denoting a [half-open](https://en.wikipedia.org/wiki/Interval_(mathematics))
\[`start`, `end`) interval to live memory with a consistent lifetime.
Invariant: `start` <= `end`
- Streams: strings prefixed by 32-bit `write` and `read` indexes that the next
write or read goes to, respectively.
- offset 0: write index
- offset 4: read index
- offset 8: size of array (in bytes)
- offset 12: start of array data
Invariant: 0 <= `read` <= `write` <= `size`
By default, writes to a stream abort if it's full. Reads to a stream abort
if it's empty.
- Graphemes: 32-bit fragments of utf-8 that encode a single Unicode code-point.
- Code-points: 32-bit integers representing a Unicode character.
### Functions
The most useful functions from 400.mu and later .mu files. Look for definitions
(using `ctags`) to see type signatures.
- `abort`: print a message in red on the bottom left of the screen and halt
#### assertions for tests
- `check`: fails current test if given boolean is false (`= 0`).
- `check-not`: fails current test if given boolean isn't false (`!= 0`).
- `check-ints-equal`: fails current test if given ints aren't equal.
- `check-strings-equal`: fails current test if given strings have different bytes.
- `check-stream-equal`: fails current test if stream's data doesn't match
string in its entirety. Ignores the stream's read index.
- `check-array-equal`: fails if an array's elements don't match what's written
in a whitespace-separated string.
- `check-next-stream-line-equal`: fails current test if next line of stream
until newline doesn't match string.
#### predicates
- `handle-equal?`: checks if two handles point at the identical address. Does
not compare payloads at their respective addresses.
- `array-equal?`: checks if two arrays (of ints only for now) have identical
elements.
- `string-equal?`: compares two strings.
- `stream-data-equal?`: compares a stream with a string.
- `next-stream-line-equal?`: compares with string the next line in a stream, from
`read` index to newline.
- `slice-empty?`: checks if the `start` and `end` of a slice are equal.
- `slice-equal?`: compares a slice with a string.
- `slice-starts-with?`: compares the start of a slice with a string.
- `stream-full?`: checks if a write to a stream would abort.
- `stream-empty?`: checks if a read from a stream would abort.
#### arrays
- `populate`: allocates space for `n` objects of the appropriate type.
- `copy-array`: allocates enough space and writes out a copy of an array of
some type.
- `slice-to-string`: allocates space for an array of bytes and copies the
slice into it.
#### streams
- `populate-stream`: allocates space in a stream for `n` objects of the
appropriate type.
- `write-to-stream`: writes arbitrary objects to a stream of the appropriate
type.
- `read-from-stream`: reads arbitrary objects from a stream of the appropriate
type.
- `stream-to-array`: allocates just enough space and writes out a stream's
data between its read index (inclusive) and write index (exclusive).
- `clear-stream`: resets everything in the stream to `0` (except its `size`).
- `rewind-stream`: resets the read index of the stream to `0` without modifying
its contents.
- `write`: writes a string into a stream of bytes. Doesn't support streams of
other types.
- `try-write`: writes a string into a stream of bytes if possible. Doesn't
support streams of other types.
- `write-stream`: concatenates one stream into another.
- `write-slice`: writes a slice into a stream of bytes.
- `append-byte`: writes a single byte into a stream of bytes.
- `append-byte-hex`: writes textual representation of lowest byte in hex to
a stream of bytes. Does not write a '0x' prefix.
- `read-byte`: reads a single byte from a stream of bytes.
- `read-grapheme`: reads a single unicode grapheme (up to 4 bytes containing a
single code-point encoded in utf-8) from a stream of bytes.
#### reading/writing hex representations of integers
- `write-int32-hex`
- `hex-int?`: checks if a slice contains an int in hex. Supports '0x' prefix.
- `parse-hex-int`: reads int in hex from string
- `parse-hex-int-from-slice`: reads int in hex from slice
- `parse-array-of-ints`: reads in multiple ints in hex, separated by whitespace.
- `hex-digit?`: checks if byte is in [0, 9] or [a, f] (lowercase only)
- `write-int32-decimal`
- `parse-decimal-int`
- `parse-decimal-int-from-slice`
- `parse-decimal-int-from-stream`
- `parse-array-of-decimal-ints`
- `decimal-digit?`: checks if byte is in [0, 9]
#### printing to screen
`pixel-on-real-screen` draws a single pixel in one of 256 colors.
All text-mode screen primitives require a screen object, which can be either
the real screen on the computer or a fake screen for tests.
The real screen on the Mu computer can currently display a subset of Unicode.
There is only one font, and it's mostly fixed-width, with graphemes being
either 8 or 16 pixels wide.
- `draw-grapheme`: draws a single grapheme at a given coordinate, with given
foreground and background colors.
- `render-grapheme`: like `draw-grapheme` and can also handle newlines
assuming text is printed left-to-right, top-to-bottom.
- `draw-code-point`
- `clear-screen`
- `draw-text-rightward`: draws a single line of text, stopping when it reaches
either the provided bound or the right screen margin.
- `draw-stream-rightward`
- `draw-text-rightward-over-full-screen`: does not provide a bound.
- `draw-text-wrapping-right-then-down`: draws multiple lines of text on screen
with simplistic word-wrap (no hyphenation) within (x, y) bounds.
- `draw-stream-wrapping-right-then-down`
- `draw-text-wrapping-right-then-down-over-full-screen`
- `draw-int32-hex-wrapping-right-then-down`
- `draw-int32-hex-wrapping-right-then-down-over-full-screen`
- `draw-int32-decimal-wrapping-right-then-down`
- `draw-int32-decimal-wrapping-right-then-down-over-full-screen`
Similar primitives for writing text top-to-bottom, left-to-right.
- `draw-text-downward`
- `draw-stream-downward`
- `draw-text-wrapping-down-then-right`
- `draw-stream-wrapping-down-then-right`
- `draw-text-wrapping-down-then-right-over-full-screen`
- `draw-int32-hex-wrapping-down-then-right`
- `draw-int32-hex-wrapping-down-then-right-over-full-screen`
- `draw-int32-decimal-wrapping-down-then-right`
- `draw-int32-decimal-wrapping-down-then-right-over-full-screen`
Screens remember the current cursor position.
- `cursor-position`
- `set-cursor-position`
- `draw-grapheme-at-cursor`
- `draw-code-point-at-cursor`
- `draw-cursor`: highlights the current position of the cursor. Programs must
pass in the grapheme to draw at the cursor position, and are responsible for
clearing the highlight when the cursor moves.
- `move-cursor-left`, `move-cursor-right`, `move-cursor-up`, `move-cursor-down`.
These primitives always silently fail if the desired movement would go out
of screen bounds.
- `move-cursor-to-left-margin-of-next-line`
- `move-cursor-rightward-and-downward`: move cursor one grapheme to the right
- `draw-text-rightward-from-cursor`
- `draw-text-wrapping-right-then-down-from-cursor`
- `draw-text-wrapping-right-then-down-from-cursor-over-full-screen`
- `draw-int32-hex-wrapping-right-then-down-from-cursor`
- `draw-int32-hex-wrapping-right-then-down-from-cursor-over-full-screen`
- `draw-int32-decimal-wrapping-right-then-down-from-cursor`
- `draw-int32-decimal-wrapping-right-then-down-from-cursor-over-full-screen`
- `draw-text-wrapping-down-then-right-from-cursor`
- `draw-text-wrapping-down-then-right-from-cursor-over-full-screen`
Assertions for tests:
- `check-screen-row`: compare a screen from the left margin of a given row
index with a string. The row index counts downward from 0 at the top of the
screen. String can be smaller or larger than a single row, and defines the
region of interest. Strings longer than a row wrap around to the left margin
of the next screen row. Currently assumes text is printed left-to-right on
the screen.
- `check-screen-row-from`: compare a fragment of a screen (left to write, top
to bottom) starting from a given (x, y) coordinate with an expected string.
Currently assumes text is printed left-to-right and top-to-bottom on the
screen.
- `check-screen-row-in-color`: like `check-screen-row` but:
- also compares foreground color
- ignores screen locations where the expected string contains spaces
- `check-screen-row-in-color-from`
- `check-screen-row-in-background-color`
- `check-screen-row-in-background-color-from`
- `check-background-color-in-screen-row`: unlike previous functions, this
doesn't check screen contents, only background color. Ignores background
color where expected string contains spaces, and compares background color
where expected string does not contain spaces. Never compares the character
at any screen location.
- `check-background-color-in-screen-row-from`
#### pixel graphics
- `pixel`: draw a single point at (x, y) with a given color between 0 and 255.
- `draw-line`: between two points (x1, y1) and (x2, y2)
- `draw-horizontal-line`
- `draw-vertical-line`
- `draw-circle`
- `draw-disc`: takes an inner and outer radius
- `draw-monotonic-bezier`: draw curved lines with a single control point.
Doesn't support curves with "U-turns".
#### events
`read-key` reads a single key from the keyboard and returns it if it exists.
Returns 0 if no key has been pressed.
`read-line-from-keyboard` reads keys from keyboard, echoes them to screen
(with given fg/bg colors) and accumulates them in a stream until it encounters
a newline.
`read-mouse-event` returns a recent change in x and y coordinate.
`timer-counter` returns a monotonically increasing counter with some
fixed frequency. You can periodically poll it to check for intervals passing,
but can't make assumptions about how much time has passed.
Mu doesn't currently support interrupt-based events.
We also don't yet have a fake keyboard.
#### persistent storage
`read-ata-disk` synchronously reads a whole number of _sectors_ from a _disk_
of persistent storage. The disk must follow the ATA specification with a
28-bit sector address. Each sector is 512 bytes. Therefore, Mu currently
supports ATA hard disks of up to 128GB capacity.
Similarly, `write-ata-disk` synchronously writes a whole number of sectors to
disk.
Mu doesn't currently support asynchronous transfers to or from a disk.