7267 - mu.subx: type-check 'convert' statements

2 files changed, 637 insertions, 0 deletions

diff --git a/apps/mu b/apps/mu
index 4437dab7..3aea0d3a 100755
--- a/apps/mu
+++ b/apps/mu
Binary files differdiff --git a/apps/mu.subx b/apps/mu.subx
index 3ceb5f29..73427cc5 100644
--- a/apps/mu.subx
+++ b/apps/mu.subx
@@ -14165,6 +14165,439 @@ test-populate-stream-deref-address:
     5d/pop-to-ebp
     c3/return
 
+test-convert-with-no-inout:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x/eax: int <- convert\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-with-no-inout: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt 'convert' expects an inout"  "F - test-convert-with-no-inout: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-with-no-inout: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-with-multiple-inouts:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x/eax: int <- convert 0, 0\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-with-multiple-inouts: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt 'convert' must have just one inout"  "F - test-convert-with-multiple-inouts: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-with-multiple-inouts: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-with-no-output:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  convert 0\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-with-no-output: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt 'convert' expects an output"  "F - test-convert-with-no-output: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-with-no-output: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-with-multiple-outputs:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x/eax: int <- copy 0\n")
+    (write _test-input-stream "  var y/ecx: int <- copy 0\n")
+    (write _test-input-stream "  x, y <- convert 0\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-with-multiple-outputs: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt 'convert' must have just one output"  "F - test-convert-with-multiple-outputs: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-with-multiple-outputs: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-deref-address:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x/eax: (addr int) <- copy 0\n")
+    (write _test-input-stream "  var y/xmm4: float <- convert *x\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file Stderr 0)
+    (flush _test-output-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # not bothering checking output
+    (check-next-stream-line-equal _test-error-stream  ""  "F - test-convert-deref-address: error message")
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-to-non-register:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x: float\n")
+    (write _test-input-stream "  var y: int\n")
+    (write _test-input-stream "  x <- convert y\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-to-non-register: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt convert: output 'x' not in a register"  "F - test-convert-to-non-register: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-to-non-register: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-invalid-inout-type:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x: boolean\n")
+    (write _test-input-stream "  var y/xmm1: float <- convert x\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-invalid-inout-type: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt convert: inout 'x' must be an int or float"  "F - test-convert-invalid-inout-type: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-invalid-inout-type: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-invalid-output-type:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x: float\n")
+    (write _test-input-stream "  var y/eax: boolean <- convert x\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-invalid-output-type: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt convert: output 'y' must be an int or float"  "F - test-convert-invalid-output-type: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-invalid-output-type: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-int-to-int:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x: int\n")
+    (write _test-input-stream "  var y/eax: int <- convert x\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-int-to-int: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt convert: no need to convert int to int"  "F - test-convert-int-to-int: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-int-to-int: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
+test-convert-float-to-float:
+    # . prologue
+    55/push-ebp
+    89/<- %ebp 4/r32/esp
+    # setup
+    (clear-stream _test-input-stream)
+    (clear-stream $_test-input-buffered-file->buffer)
+    (clear-stream _test-output-stream)
+    (clear-stream $_test-output-buffered-file->buffer)
+    (clear-stream _test-error-stream)
+    (clear-stream $_test-error-buffered-file->buffer)
+    # var ed/edx: exit-descriptor = tailor-exit-descriptor(16)
+    68/push 0/imm32
+    68/push 0/imm32
+    89/<- %edx 4/r32/esp
+    (tailor-exit-descriptor %edx 0x10)
+    #
+    (write _test-input-stream "fn foo {\n")
+    (write _test-input-stream "  var x: float\n")
+    (write _test-input-stream "  var y/xmm6: float <- convert x\n")
+    (write _test-input-stream "}\n")
+    # convert
+    (convert-mu _test-input-buffered-file _test-output-buffered-file _test-error-buffered-file %edx)
+    # registers except esp clobbered at this point
+    # restore ed
+    89/<- %edx 4/r32/esp
+    (flush _test-output-buffered-file)
+    (flush _test-error-buffered-file)
+#?     # dump _test-error-stream {{{
+#?     (write 2 "^")
+#?     (write-stream 2 _test-error-stream)
+#?     (write 2 "$\n")
+#?     (rewind-stream _test-error-stream)
+#?     # }}}
+    # check output
+    (check-stream-equal _test-output-stream  ""  "F - test-convert-float-to-float: output should be empty")
+    (check-next-stream-line-equal _test-error-stream  "fn foo: stmt convert: no need to convert float to float"  "F - test-convert-float-to-float: error message")
+    # check that stop(1) was called
+    (check-ints-equal *(edx+4) 2 "F - test-convert-float-to-float: exit status")
+    # don't restore from ebp
+    81 0/subop/add %esp 8/imm32
+    # . epilogue
+    5d/pop-to-ebp
+    c3/return
+
 #######################################################
 # Parsing
 #######################################################
@@ -23914,13 +24347,217 @@ check-mu-convert-stmt:  # stmt: (addr stmt), fn: (addr function), err: (addr buf
     55/push-ebp
     89/<- %ebp 4/r32/esp
     # . save registers
+    50/push-eax
+    51/push-ecx
+    52/push-edx
+    56/push-esi
+    57/push-edi
+$check-mu-convert-stmt:get-output:
+    # esi = stmt
+    8b/-> *(ebp+8) 6/r32/esi
+    # var output/edi: (addr stmt-var) = stmt->outputs
+    (lookup *(esi+0x14) *(esi+0x18))  # Stmt1-outputs Stmt1-outputs => eax
+    89/<- %edi 0/r32/eax
+    # zero outputs
+    3d/compare-eax-and 0/imm32
+    0f 84/jump-if-= $check-mu-convert-stmt:error-no-output/disp32
+    # > 1 output
+    (lookup *(edi+8) *(edi+0xc))  # Stmt-var-next Stmt-var-next => eax
+    3d/compare-eax-and 0/imm32
+    0f 85/jump-if-!= $check-mu-convert-stmt:error-too-many-outputs/disp32
+$check-mu-convert-stmt:get-inout:
+    # var inout/esi: (addr stmt-var) = stmt->inouts
+    (lookup *(esi+0xc) *(esi+0x10))  # Stmt1-inouts Stmt1-inouts => eax
+    89/<- %esi 0/r32/eax
+    # zero inouts
+    3d/compare-eax-and 0/imm32
+    0f 84/jump-if-= $check-mu-convert-stmt:error-no-inout/disp32
+    # > 1 inout
+    (lookup *(esi+8) *(esi+0xc))  # Stmt-var-next Stmt-var-next => eax
+    3d/compare-eax-and 0/imm32
+    0f 85/jump-if-!= $check-mu-convert-stmt:error-too-many-inouts/disp32
+$check-mu-convert-stmt:types:
+    # var inout-type/ecx: (addr type-tree) = inout->value->type
+    (lookup *esi *(esi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *(eax+8) *(eax+0xc))  # Var-type Var-type => eax
+    89/<- %ecx 0/r32/eax
+    # if (inout->is-deref?) inout-type = inout-type->payload
+    8b/-> *(esi+0x10) 0/r32/eax  # Stmt-var-is-deref
+    3d/compare-eax-and 0/imm32/false
+    {
+      74/jump-if-= break/disp8
+      (lookup *(ecx+0xc) *(ecx+0x10))  # Type-tree-right Type-tree-right => eax
+      # if inout-type->right is null, t = inout-type->left
+      81 7/subop/compare *(eax+0xc) 0/imm32  # Type-tree-right
+      {
+        75/jump-if-!= break/disp8
+        (lookup *(eax+4) *(eax+8))  # Type-tree-left Type-tree-left => eax
+      }
+      89/<- %ecx 0/r32/eax
+    }
+    # if input is not int or float, abort
+    {
+      (is-simple-mu-type? %ecx 1)  # int => eax
+      3d/compare-eax-and 0/imm32/false
+      75/jump-if-!= break/disp8
+      (is-simple-mu-type? %ecx 0xf)  # float => eax
+      3d/compare-eax-and 0/imm32/false
+      75/jump-if-!= break/disp8
+      e9/jump $check-mu-convert-stmt:error-invalid-inout-type/disp32
+    }
+    # if output not in register, abort
+    (lookup *edi *(edi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *(eax+0x18) *(eax+0x1c))  # Var-register Var-register => eax
+    3d/compare-eax-and 0/imm32
+    0f 84/jump-if-= $check-mu-convert-stmt:error-output-not-in-register/disp32
+    # var output-type/edx: (addr type-tree) = output->value->type
+    (lookup *edi *(edi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *(eax+8) *(eax+0xc))  # Var-type Var-type => eax
+    89/<- %edx 0/r32/eax
+    # if output is not int or float, abort
+    {
+      (is-simple-mu-type? %edx 1)  # int => eax
+      3d/compare-eax-and 0/imm32/false
+      75/jump-if-!= break/disp8
+      (is-simple-mu-type? %edx 0xf)  # float => eax
+      3d/compare-eax-and 0/imm32/false
+      75/jump-if-!= break/disp8
+      e9/jump $check-mu-convert-stmt:error-invalid-output-type/disp32
+    }
+    # if both are ints, abort
+    {
+      (is-simple-mu-type? %edx 1)  # int => eax
+      3d/compare-eax-and 0/imm32/false
+      74/jump-if-= break/disp8
+      (is-simple-mu-type? %ecx 1)  # int => eax
+      3d/compare-eax-and 0/imm32/false
+      74/jump-if-= break/disp8
+      e9/jump $check-mu-convert-stmt:error-int-to-int/disp32
+    }
+    # if both are floats, abort
+    {
+      (is-simple-mu-type? %edx 0xf)  # float => eax
+      3d/compare-eax-and 0/imm32/false
+      74/jump-if-= break/disp8
+      (is-simple-mu-type? %ecx 0xf)  # float => eax
+      3d/compare-eax-and 0/imm32/false
+      74/jump-if-= break/disp8
+      e9/jump $check-mu-convert-stmt:error-float-to-float/disp32
+    }
 $check-mu-convert-stmt:end:
     # . restore registers
+    5f/pop-to-edi
+    5e/pop-to-esi
+    5a/pop-to-edx
+    59/pop-to-ecx
+    58/pop-to-eax
     # . epilogue
     89/<- %esp 5/r32/ebp
     5d/pop-to-ebp
     c3/return
 
+$check-mu-convert-stmt:error-no-inout:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt 'convert' expects an inout\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-too-many-inouts:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt 'convert' must have just one inout\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-no-output:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt 'convert' expects an output\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-output-not-in-register:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt convert: output '")
+    (lookup *edi *(edi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *eax *(eax+4))  # Var-name Var-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) "' not in a register\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-too-many-outputs:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt 'convert' must have just one output\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-invalid-inout-type:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt convert: inout '")
+    (lookup *esi *(esi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *eax *(eax+4))  # Var-name Var-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) "' must be an int or float\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-invalid-output-type:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt convert: output '")
+    (lookup *edi *(edi+4))  # Stmt-var-value Stmt-var-value => eax
+    (lookup *eax *(eax+4))  # Var-name Var-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) "' must be an int or float\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-int-to-int:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt convert: no need to convert int to int\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
+$check-mu-convert-stmt:error-float-to-float:
+    (write-buffered *(ebp+0x10) "fn ")
+    8b/-> *(ebp+0xc) 0/r32/eax
+    (lookup *eax *(eax+4))  # Function-name Function-name => eax
+    (write-buffered *(ebp+0x10) %eax)
+    (write-buffered *(ebp+0x10) ": stmt convert: no need to convert float to float\n")
+    (flush *(ebp+0x10))
+    (stop *(ebp+0x14) 1)
+    # never gets here
+
 check-mu-call:  # stmt: (addr stmt), callee: (addr function), fn: (addr function), err: (addr buffered-file), ed: (addr exit-descriptor)
     # . prologue
     55/push-ebp