diff options
Diffstat (limited to 'build4')
-rwxr-xr-x | build4 | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/build4 b/build4 new file mode 100755 index 00000000..852d7185 --- /dev/null +++ b/build4 @@ -0,0 +1,284 @@ +#!/bin/sh +# Experimental alternative to build2 that can run steps in parallel if their +# dependencies are met. Caveats: +# +# 1. We rely on the OS to schedule steps, so thousands of independent tasks +# will likely be counter-productive. +# 2. Can run out of virtual memory if you spawn too many say $CC processes. +# 3. Compilation errors can cause the script to hang. +# 4. Ugly as heck! Really needs simpler versions to compare against. And +# even then, diff gets confused. +# 5. There's a mechanical difficulty: we use mktemp to reliably create +# temporary filenames, which has the side effect of also creating the +# files. So zero-size files are considered equivalent to empty files. +# When some commands have trouble with this (e.g. ar) we need to delete +# the empty file, which can expose us to a race condition wrt mktemp. + +set -e # stop immediately on error + +# Some environment variables that can be passed in. For example, to turn off +# optimization: +# $ CFLAGS=-g ./build2 +test "$CXX" || export CXX=c++ +test "$CC" || export CC=cc +test "$CFLAGS" || export CFLAGS="-g -O2" +export CFLAGS="$CFLAGS -Wall -Wextra -ftrapv -fno-strict-aliasing" + +# Outline: +# [0-9]*.cc -> mu.cc -> .build/*.cc -> .build/*.o -> .build/mu_bin +# (layers) | | | | +# tangle cleave $CXX $CXX + +# can also be called with a layer to only build until +# $ ./build2 --until 050 +UNTIL_LAYER=${2:-zzz} + +# there's two mechanisms for fast builds here: +# - if a command is quick to run, always run it but update the result only on any change +# - otherwise run it only if the output is 'older_than' the inputs +# +# avoid combining both mechanisms for a single file +# otherwise you'll see spurious messages about files being updated +# risk: a file may unnecessarily update without changes, causing unnecessary work downstream + +# return 1 if $1 is older than _any_ of the remaining args +older_than() { + local target=$1 + shift + if [ ! -s $target ] + then +#? echo "$target has size zero" +#? echo "updating $target" >&2 + return 0 # success + fi + local f + for f in $* + do + if [ $f -nt $target ] + then +#? echo "updating $target" >&2 + return 0 # success + fi + done + return 1 # failure +} + +# redirect to $1, unless it's already identical +update() { + if [ ! -e $1 ] + then + cat > $1 + else + cat > $1.tmp + diff -q $1 $1.tmp >/dev/null && rm $1.tmp || mv $1.tmp $1 + fi +} + +update_cp() { + if [ ! -e $2/$1 ] + then + cp $1 $2 + elif [ $1 -nt $2/$1 ] + then + cp $1 $2 + fi +} + +noisy_cd() { + cd $1 + echo "-- `pwd`" >&2 +} + +mv_if_exists() { + test -e $1 && mv $1 $2 + return 0 +} + +wait_for_all() { + # could use inotify on Linux + while ! all_exist "$@" + do + sleep 1 + done +} + +all_exist() { + for f in "$@" + do + test -e $f || return 1 + done + return 0 +} + +TMP=`mktemp` +mv_if_exists enumerate/enumerate $TMP +( + wait_for_all enumerate/enumerate.cc + older_than $TMP enumerate/enumerate.cc && { + echo "building enumerate" + $CXX $CFLAGS enumerate/enumerate.cc -o $TMP + echo "done building enumerate" + } + mv $TMP enumerate/enumerate +) & + +TMP=`mktemp` +mv_if_exists tangle/tangle $TMP +( + wait_for_all tangle/*.cc + older_than $TMP tangle/*.cc && { + echo "building tangle" + cd tangle + # auto-generate various lists (ending in '_list' by convention) { + # list of types + { + grep -h "^struct .* {" [0-9]*.cc |sed 's/\(struct *[^ ]*\).*/\1;/' + grep -h "^typedef " [0-9]*.cc + } |update type_list + # list of function declarations, so I can define them in any order + grep -h "^[^ #].*) {" [0-9]*.cc |sed 's/ {.*/;/' |update function_list + # list of code files to compile + ls [0-9]*.cc |grep -v "\.test\.cc$" |sed 's/.*/#include "&"/' |update file_list + # list of test files to compile + ls [0-9]*.test.cc |sed 's/.*/#include "&"/' |update test_file_list + # list of tests to run + grep -h "^[[:space:]]*void test_" [0-9]*.cc |sed 's/^\s*void \(.*\)() {$/\1,/' |update test_list + # } + # Now that we have all the _lists, compile 'tangle' + $CXX $CFLAGS boot.cc -o $TMP + cd .. + echo "done building tangle" + } + mv $TMP tangle/tangle +) & + +wait_for_all enumerate/enumerate +echo "enumerating layers" +LAYERS=$(./enumerate/enumerate --until $UNTIL_LAYER |grep '\.cc$') +echo "done enumerating layers" + +TMP=`mktemp` +mv_if_exists mu.cc $TMP +( + wait_for_all $LAYERS enumerate/enumerate tangle/tangle + older_than $TMP $LAYERS enumerate/enumerate tangle/tangle && { + echo "running tangle" + # no update here; rely on 'update' calls downstream + ./tangle/tangle $LAYERS > $TMP + echo "done running tangle" + } + mv $TMP mu.cc +) & + +TMP=`mktemp` +mv_if_exists cleave/cleave $TMP +( + wait_for_all cleave/cleave.cc + older_than $TMP cleave/cleave.cc && { + echo "building cleave" + $CXX $CFLAGS cleave/cleave.cc -o $TMP + rm -rf .build + echo "done building cleave" + } + mv $TMP cleave/cleave +) & + +wait_for_all mu.cc cleave/cleave # cleave/cleave just for the .build cleanup +mkdir -p .build +# auto-generate function declarations, so I can define them in any order +# functions start out unindented, have all args on the same line, and end in ') {' +# +# \/ ignore methods +grep -h "^[^[:space:]#].*) {$" mu.cc |grep -v ":.*(" |sed 's/ {.*/;/' |update .build/function_list +# auto-generate list of tests to run +grep -h "^\s*void test_" mu.cc |sed 's/^\s*void \(.*\)() {.*/\1,/' |update .build/test_list +mkdir -p .build/termbox +update_cp termbox/termbox.h .build/termbox + +TMP=`mktemp` +mv_if_exists mu_bin $TMP +( + wait_for_all mu.cc cleave/cleave termbox/*.c termbox/*.h termbox/*.inl + older_than $TMP mu.cc *_list cleave/cleave termbox/* && { + echo "building mu_bin" + ./cleave/cleave mu.cc .build + cd .build + # create the list of global variable declarations from the corresponding definitions + grep ';' global_definitions_list |sed 's/[=(].*/;/' |sed 's/^[^\/# ]/extern &/' |sed 's/^extern extern /extern /' |update global_declarations_list + for f in mu_*.cc + do + OBJ=`echo $f |sed 's/\.cc$/.o/'` + TMP=`mktemp` + mv_if_exists $OBJ $TMP + ( + older_than $TMP $f header global_declarations_list function_list test_list && { + echo "building $OBJ" + $CXX $CFLAGS -c $f -o $TMP + echo "done building $OBJ" + } + mv $TMP $OBJ + ) & + done + cd ../termbox + TMP=`mktemp` + mv_if_exists utf8.o $TMP + ( + older_than $TMP utf8.c && { + echo "building termbox/utf8.o" + $CC $CFLAGS -c utf8.c -o $TMP + echo "done building termbox/utf8.o" + } + mv $TMP utf8.o + ) & + TMP=`mktemp` + mv_if_exists termbox.o $TMP + ( + older_than $TMP termbox.c termbox.h input.inl output.inl bytebuffer.inl && { + echo "building termbox/termbox.o" + $CC $CFLAGS -c termbox.c -o $TMP + echo "done building termbox/termbox.o" + } + mv $TMP termbox.o + ) & + TMP=`mktemp` + mv_if_exists libtermbox.a $TMP + ( + wait_for_all termbox.o utf8.o + older_than $TMP termbox.o utf8.o && { + echo "building termbox/libtermbox.a" + rm $TMP; ar rcs $TMP termbox.o utf8.o # race condition; later mktemp may end up reusing this file + echo "done building termbox/libtermbox.a" + } + mv $TMP libtermbox.a + ) & + cd .. + MU_OBJS=`echo .build/mu_*.cc |sed 's/\.cc/.o/g'` + echo wait_for_all $MU_OBJS termbox/libtermbox.a + wait_for_all $MU_OBJS termbox/libtermbox.a + echo "building .build/mu_bin" + $CXX $CFLAGS $MU_OBJS termbox/libtermbox.a -o $TMP + echo "done building .build/mu_bin" + echo "done building mu_bin" + } + mv $TMP mu_bin +) & + +## [0-9]*.mu -> core.mu + +wait_for_all enumerate/enumerate +echo "building core.mu" +MU_LAYERS=$(./enumerate/enumerate --until $UNTIL_LAYER |grep '\.mu$') || exit 0 # ok if no .mu files +cat $MU_LAYERS |update core.mu +echo "done building core.mu" + +wait_for_all mu_bin +exit 0 + +# scenarios considered: +# 0 status when nothing needs updating +# no output when nothing needs updating +# no output for mu.cc when .mu files modified +# touch mu.cc but don't modify it; no output on second build +# touch a .cc layer but don't modify it; no output on second build +# only a single layer is recompiled when changing a C++ function +# stop immediately after failure in tangle |