diff options
Diffstat (limited to 'tools/conf/etc/iptables/iptables-br.sh')
| -rw-r--r-- | tools/conf/etc/iptables/iptables-br.sh | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/tools/conf/etc/iptables/iptables-br.sh b/tools/conf/etc/iptables/iptables-br.sh new file mode 100644 index 0000000..104e574 --- /dev/null +++ b/tools/conf/etc/iptables/iptables-br.sh @@ -0,0 +1,318 @@ +#!/bin/sh + +# +# XXXXXXXXXXXXXXXXX +# XXXX Network XXXX +# XXXXXXXXXXXXXXXXX +# + +# | +# v +# +-------------+ +------------------+ +# |table: filter| <---+ | table: nat | +# |chain: INPUT | | | chain: PREROUTING| +# +-----+-------+ | +--------+---------+ +# | | | +# v | v +# [local process] | **************** +--------------+ +# | +---------+ Routing decision +------> |table: filter | +# v **************** |chain: FORWARD| +# **************** +------+-------+ +# Routing decision | +# **************** | +# | | +# v **************** | +# +-------------+ +------> Routing decision <---------------+ +# |table: nat | | **************** +# |chain: OUTPUT| | + +# +-----+-------+ | | +# | | v +# v | +-------------------+ +# +--------------+ | | table: nat | +# |table: filter | +----+ | chain: POSTROUTING| +# |chain: OUTPUT | +--------+----------+ +# +--------------+ | +# v +# XXXXXXXXXXXXXXXXX +# XXXX Network XXXX +# XXXXXXXXXXXXXXXXX +# +# iptables [-t table] {-A|-C|-D} chain rule-specification +# +# iptables [-t table] {-A|-C|-D} chain rule-specification +# +# iptables [-t table] -I chain [rulenum] rule-specification +# +# iptables [-t table] -R chain rulenum rule-specification +# +# iptables [-t table] -D chain rulenum +# +# iptables [-t table] -S [chain [rulenum]] +# +# iptables [-t table] {-F|-L|-Z} [chain [rulenum]] [options...] +# +# iptables [-t table] -N chain +# +# iptables [-t table] -X [chain] +# +# iptables [-t table] -P chain target +# +# iptables [-t table] -E old-chain-name new-chain-name +# +# rule-specification = [matches...] [target] +# +# match = -m matchname [per-match-options] +# +# +# Targets +# +# can be a user defined chain +# +# ACCEPT - accepts the packet +# DROP - drop the packet on the floor +# QUEUE - packet will be stent to queue +# RETURN - stop traversing this chain and +# resume ate the next rule in the +# previeus (calling) chain. +# +# if packet reach the end of the chain or +# a target RETURN, default policy for that +# chain is applayed. +# +# Target Extensions +# +# AUDIT +# CHECKSUM +# CLASSIFY +# DNAT +# DSCP +# LOG +# Torn on kernel logging, will print some +# some information on all matching packets. +# Log data can be read with dmesg or syslogd. +# This is a non-terminating target and a rule +# should be created with matching criteria. +# +# --log-level level +# Level of logging (numeric or see sys- +# log.conf(5) +# +# --log-prefix prefix +# Prefix log messages with specified prefix +# up to 29 chars log +# +# --log-uid +# Log the userid of the process with gener- +# ated the packet +# NFLOG +# This target pass the packet to loaded logging +# backend to log the packet. One or more userspace +# processes may subscribe to the group to receive +# the packets. +# +# ULOG +# This target provides userspace logging of maching +# packets. One or more userspace processes may then +# then subscribe to various multicast groups and +# then receive the packets. +# +# +# Commands +# +# -A, --append chain rule-specification +# -C, --check chain rule-specification +# -D, --delete chain rule-specification +# -D, --delete chain rulenum +# -I, --insert chain [rulenum] rule-specification +# -R, --replace chain rulenum rule-specification +# -L, --list [chain] +# -P, --policy chain target +# +# Parameters +# +# -p, --protocol protocol +# tcp, udp, udplite, icmp, esp, ah, sctp, all +# -s, --source address[/mask][,...] +# -d, --destination address[/mask][,...] +# -j, --jump target +# -g, --goto chain +# -i, --in-interface name +# -o, --out-interface name +# -f, --fragment +# -m, --match options module-name +# iptables can use extended packet matching +# modules. +# -c, --set-counters packets bytes + +IPT="/usr/sbin/iptables" +SPAMLIST="blockedip" +SPAMDROPMSG="BLOCKED IP DROP" +# public interface to network/internet +PUB_IF="wlp7s0" +DHCP_SERV="192.168.1.1" +PUB_IP="192.168.1.33" +NET_ADDR="192.168.1.0/24" +# private interface for virtual/internal +PRIV_IF="br0" +PRIV_IP="10.0.0.1" + +modprobe ip_conntrack +modprobe ip_conntrack_ftp + +echo "Stopping ipv4 firewall and deny everyone..." + +iptables -F +iptables -X +iptables -t nat -F +iptables -t nat -X +iptables -t mangle -F +iptables -t mangle -X +iptables -t raw -F +iptables -t raw -X +iptables -t security -F +iptables -t security -X + + +echo "Starting ipv4 firewall filter table..." + +# Set Default Rules +iptables -P INPUT DROP +iptables -P FORWARD DROP +iptables -P OUTPUT DROP + +###### AP rules ###### +echo 1 > /proc/sys/net/ipv4/ip_forward +$IPT -A FORWARD -i ${PRIV_IF} -o ${PUB_IF} -j ACCEPT +$IPT -A FORWARD -i ${PUB_IF} -o ${PRIV_IF} -j ACCEPT +$IPT -t nat -A POSTROUTING -o ${PUB_IF} -j SNAT --to ${PUB_IP} + +# Block sync +$IPT -A INPUT -p tcp ! --syn -m state --state NEW -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 7 --log-prefix "iptables: drop sync: " +$IPT -A INPUT -p tcp ! --syn -m state --state NEW -j DROP + +# Block Fragments +$IPT -A INPUT -f -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "iptables: drop frag: " +$IPT -A INPUT -f -j DROP + +# Block bad stuff +$IPT -A INPUT -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP +$IPT -A INPUT -p tcp --tcp-flags ALL ALL -j DROP + +$IPT -A INPUT -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "iptables: drop null: " +$IPT -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # NULL packets + +$IPT -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "iptables: drop syn rst syn rst: " +$IPT -A INPUT -p tcp --tcp-flags SYN,RST SYN,RST -j DROP + +$IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "iptables: drop xmas: " +$IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS + +$IPT -A INPUT -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "iptables: drop fin scan: " +$IPT -A INPUT -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans + +$IPT -A INPUT -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP + + +###### Input Chain ###### + +# Unlimited on local +$IPT -A INPUT -i ${PRIV_IF} -j ACCEPT +#$IPT -A INPUT -i lo -s ${PRIV_IP} -j ACCEPT + +# Unlimited on loopback +$IPT -A INPUT -i lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT +$IPT -A INPUT -i lo -s 192.168.1.33 -d 192.168.1.33 -j ACCEPT + +echo "Allow input from DNS Server" +$IPT -A INPUT -i ${PUB_IF} -p udp --dport 1024:65535 --sport 53 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from Https server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 443 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT +$IPT -A INPUT -i ${PUB_IF} -p udp --sport 443 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input to HTTPS Server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 1024:65535 --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT + +#echo "Allow input from HTTP Server" +#$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 80 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from IRC server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --dport 1024:65535 --sport 6667 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from FTP server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --dport 1024:65535 --sport 21 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from git server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 9418 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from POP3S server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 995 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input from SMTPS server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 465 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT + +echo "Allow input to HTTP Server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 1024:65535 --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT + +#echo "Allow input to DNS Server" +#$IPT -A INPUT -i ${PUB_IF} -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -s 192.168.0.0/16 -j ACCEPT + +echo "Allow input to SSH server" +$IPT -A INPUT -i ${PUB_IF} -p tcp --dport 2222 --sport 1024:65535 -m state --state NEW,ESTABLISHED -j ACCEPT + +###### Output Chain ###### + +# Unlimited on loopback +$IPT -A OUTPUT -o lo -s 127.0.0.0/8 -d 127.0.0.0/8 -j ACCEPT +$IPT -A OUTPUT -o lo -s 192.168.1.33 -d 192.168.1.33 -j ACCEPT +#$IPT -A OUTPUT -o lo -d ${PRIV_IP} -j ACCEPT + +# Unlimited on local +$IPT -A OUTPUT -o ${PRIV_IF} -j ACCEPT + +echo "Allow output to DNS server" +$IPT -A OUTPUT -o ${PUB_IF} -p udp --dport 53 --sport 1024:65535 -j ACCEPT + +echo "Allow output to https server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT +$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 1024:65535 --dport 443 -j ACCEPT + +echo "Allow output from https server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 443 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT + +#echo "Allow output from http server" +#$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 80 --dport 1024:65535 -m state --state RELATED,ESTABLISHED -j ACCEPT + +#echo "Allow to HTTP server" +#$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to SSH server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 2222 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to ftp server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to git server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 9418 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to IRC server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 6667 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to SMTPS server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 465 --sport 1024:65535 -m state --state NEW,ESTABLISHED -j ACCEPT + +echo "Allow output to POP3S server" +$IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 995 --sport 1024:65535 -m state --state NEW,ESTABLISHED -j ACCEPT + +## less logs + +echo "Drop RIP protocol" +$IPT -A INPUT -i ${PUB_IF} -p udp --sport 520 --dport 520 -s $NET_ADDR -j DROP + +$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 68 --dport 67 -d $DHCP_SERV -j ACCEPT + +## log everything else and drop +$IPT -A INPUT -j LOG --log-level 7 --log-prefix "iptables: INPUT: " +$IPT -A OUTPUT -j LOG --log-level 7 --log-prefix "iptables: OUTPUT: " +$IPT -A FORWARD -j LOG --log-level 7 --log-prefix "iptables: FORWARD: " +# +exit 0 |