14 files changed, 0 insertions, 611 deletions
diff --git a/tools/conf/etc/skel/.gitconfig b/tools/conf/etc/skel/.gitconfig
deleted file mode 100644
index 730d8d9..0000000
--- a/tools/conf/etc/skel/.gitconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-[core]
-	pager = less -F -X
-	editor = vim
-[diff]
-	tool = vimdiff
-[merge]
-	tool = vimdiff
-	conflictstyle = diff3
-[difftool]
-	prompt = false
diff --git a/tools/conf/etc/skel/.gnupg/gpg.conf b/tools/conf/etc/skel/.gnupg/gpg.conf
deleted file mode 100644
index 48edc58..0000000
--- a/tools/conf/etc/skel/.gnupg/gpg.conf
+++ /dev/null
@@ -1,136 +0,0 @@
-# Options for GnuPG
-# Copyright 1998-2003, 2010 Free Software Foundation, Inc.
-# Copyright 1998-2003, 2010 Werner Koch
-#
-# This file is free software; as a special exception the author gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# This file is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-#
-# Unless you specify which option file to use (with the command line
-# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf
-# by default.
-#
-# An options file can contain any long options which are available in
-# GnuPG. If the first non white space character of a line is a '#',
-# this line is ignored.  Empty lines are also ignored.
-#
-# See the gpg man page for a list of options.
-
-
-# If you have more than 1 secret key in your keyring, you may want to
-# uncomment the following option and set your preferred keyid.
-
-#default-key 621CC013
-
-
-# If you do not pass a recipient to gpg, it will ask for one.  Using
-# this option you can encrypt to a default key.  Key validation will
-# not be done in this case.  The second form uses the default key as
-# default recipient.
-
-#default-recipient some-user-id
-#default-recipient-self
-
-
-# Group names may be defined like this:
-#   group mynames = paige 0x12345678 joe patti
-#
-# Any time "mynames" is a recipient (-r or --recipient), it will be
-# expanded to the names "paige", "joe", and "patti", and the key ID
-# "0x12345678".  Note there is only one level of expansion - you
-# cannot make an group that points to another group.  Note also that
-# if there are spaces in the recipient name, this will appear as two
-# recipients.  In these cases it is better to use the key ID.
-
-#group mynames = paige 0x12345678 joe patti
-
-
-# GnuPG can automatically locate and retrieve keys as needed using
-# this option.  This happens when encrypting to an email address (in
-# the "user@@example.com" form) and there are no keys matching
-# "user@example.com" in the local keyring.  This option takes any
-# number mechanisms which are tried in the given order.  The default
-# is "--auto-key-locate local" to search for keys only in the local
-# key database.  Uncomment the next line to locate a missing key using
-# two DNS based mechanisms.
-
-#auto-key-locate local,pka,dane
-
-
-# Common options for keyserver functions:
-# (Note that the --keyserver option has been moved to dirmngr.conf)
-#
-# include-disabled = when searching, include keys marked as "disabled"
-#                    on the keyserver (not all keyservers support this).
-#
-# no-include-revoked = when searching, do not include keys marked as
-#                      "revoked" on the keyserver.
-#
-# verbose = show more information as the keys are fetched.
-#           Can be used more than once to increase the amount
-#           of information shown.
-#
-# auto-key-retrieve = automatically fetch keys as needed from the keyserver
-#                     when verifying signatures or when importing keys that
-#                     have been revoked by a revocation key that is not
-#                     present on the keyring.
-#
-# no-include-attributes = do not include attribute IDs (aka "photo IDs")
-#                         when sending keys to the keyserver.
-
-#keyserver-options auto-key-retrieve
-
-
-# Uncomment this line to display photo user IDs in key listings and
-# when a signature from a key with a photo is verified.
-
-#show-photos
-
-
-# Use this program to display photo user IDs
-#
-# %i is expanded to a temporary file that contains the photo.
-# %I is the same as %i, but the file isn't deleted afterwards by GnuPG.
-# %k is expanded to the key ID of the key.
-# %K is expanded to the long OpenPGP key ID of the key.
-# %t is expanded to the extension of the image (e.g. "jpg").
-# %T is expanded to the MIME type of the image (e.g. "image/jpeg").
-# %f is expanded to the fingerprint of the key.
-# %% is %, of course.
-#
-# If %i or %I are not present, then the photo is supplied to the
-# viewer on standard input.  If your platform supports it, standard
-# input is the best way to do this as it avoids the time and effort in
-# generating and then cleaning up a secure temp file.
-#
-# The default program is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin"
-# On Mac OS X and Windows, the default is to use your regular JPEG image
-# viewer.
-#
-# Some other viewers:
-# photo-viewer "qiv %i"
-# photo-viewer "ee %i"
-# photo-viewer "display -title 'KeyID 0x%k'"
-#
-# This one saves a copy of the photo ID in your home directory:
-# photo-viewer "cat > ~/photoid-for-key-%k.%t"
-#
-# Use your MIME handler to view photos:
-# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG"
-
-
-# Because some mailers change lines starting with "From " to ">From "
-# it is good to handle such lines in a special way when creating
-# cleartext signatures; all other PGP versions do it this way too.
-# To enable full OpenPGP compliance you may want to use this option.
-
-#no-escape-from-lines
-
-
-# Uncomment the following option to get rid of the copyright notice
-
-#no-greeting
diff --git a/tools/conf/etc/skel/.mutt/external b/tools/conf/etc/skel/.mutt/external
deleted file mode 100644
index 8ade1b1..0000000
--- a/tools/conf/etc/skel/.mutt/external
+++ /dev/null
@@ -1,27 +0,0 @@
-color status blue default
-
-unset sendmail
-
-set folder="~/.mailext"
-set mbox_type=Maildir
-set spoolfile="~/.mailext"
-set keep_flagged=yes            # esc-f to mark messages in spool, and
-
-set mbox="~/.mailext"
-set postponed="+.Drafts"
-set record="+.Sent"
-
-set use_from=yes
-set ssl_starttls=yes
-set ssl_force_tls = yes
-
-set realname='User Name'
-set from=mail@external.org
-
-set pop_user="mail@external.org"
-set pop_pass="password"
-set pop_delete=yes
-set pop_host="pops://$pop_user:$pop_pass@pop.external.org:995"
-
-set smtp_url="smtps://$pop_user:$pop_pass@smtp.external.org/"
-
diff --git a/tools/conf/etc/skel/.mutt/gpg.rc b/tools/conf/etc/skel/.mutt/gpg.rc
deleted file mode 100644
index 2ef0ae2..0000000
--- a/tools/conf/etc/skel/.mutt/gpg.rc
+++ /dev/null
@@ -1,88 +0,0 @@
-# -*-muttrc-*-
-#
-# Command formats for gpg.
-# 
-# This version uses gpg-2comp from 
-#   http://70t.de/download/gpg-2comp.tar.gz
-#
-# $Id$
-#
-# %p    The empty string when no passphrase is needed,
-#       the string "PGPPASSFD=0" if one is needed.
-#
-#       This is mostly used in conditional % sequences.
-#
-# %f    Most PGP commands operate on a single file or a file
-#       containing a message.  %f expands to this file's name.
-#
-# %s    When verifying signatures, there is another temporary file
-#       containing the detached signature.  %s expands to this
-#       file's name.
-#
-# %a    In "signing" contexts, this expands to the value of the
-#       configuration variable $pgp_sign_as.  You probably need to
-#       use this within a conditional % sequence.
-#
-# %r    In many contexts, mutt passes key IDs to pgp.  %r expands to
-#       a list of key IDs.
-
-# Note that we explicitly set the comment armor header since GnuPG, when used
-# in some localiaztion environments, generates 8bit data in that header, thereby
-# breaking PGP/MIME.
-
-# decode application/pgp
-set pgp_decode_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
-
-# verify a pgp/mime signature
-set pgp_verify_command="gpg --status-fd=2 --no-verbose --quiet --batch --output - --verify %s %f"
-
-# decrypt a pgp/mime attachment
-set pgp_decrypt_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
-
-# create a pgp/mime signed attachment
-# set pgp_sign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
-set pgp_sign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
-
-# create a application/pgp signed (old-style) message
-# set pgp_clearsign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
-set pgp_clearsign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
-
-# create a pgp/mime encrypted attachment
-# set pgp_encrypt_only_command="pgpewrap gpg-2comp -v --batch --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
-set pgp_encrypt_only_command="pgpewrap gpg --batch --quiet --no-verbose --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
-
-# create a pgp/mime encrypted and signed attachment
-# set pgp_encrypt_sign_command="pgpewrap gpg-2comp %?p?--passphrase-fd 0? -v --batch --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
-set pgp_encrypt_sign_command="pgpewrap gpg %?p?--passphrase-fd 0? --batch --quiet --no-verbose --textmode --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
-
-# import a key into the public key ring
-set pgp_import_command="gpg --no-verbose --import %f"
-
-# export a key from the public key ring
-set pgp_export_command="gpg --no-verbose --export --armor %r"
-
-# verify a key
-set pgp_verify_key_command="gpg --verbose --batch --fingerprint --check-sigs %r"
-
-# read in the public key ring
-set pgp_list_pubring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-keys %r"
-
-# read in the secret key ring
-set pgp_list_secring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-secret-keys %r"
-
-# fetch keys
-# set pgp_getkeys_command="pkspxycwrap %r"
-
-# pattern for good signature - may need to be adapted to locale!
-
-# set pgp_good_sign="^gpgv?: Good signature from "
-
-# OK, here's a version which uses gnupg's message catalog:
-# set pgp_good_sign="`gettext -d gnupg -s 'Good signature from "' | tr -d '"'`"
-
-# This version uses --status-fd messages
-set pgp_good_sign="^\\[GNUPG:\\] GOODSIG"
-
-# pattern to verify a decryption occurred
-set pgp_decryption_okay="^\\[GNUPG:\\] DECRYPTION_OKAY"
-
diff --git a/tools/conf/etc/skel/.mutt/mail_alias b/tools/conf/etc/skel/.mutt/mail_alias
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.mutt/mail_alias
+++ /dev/null
diff --git a/tools/conf/etc/skel/.mutt/muttrc b/tools/conf/etc/skel/.mutt/muttrc
deleted file mode 100644
index 6ec1da4..0000000
--- a/tools/conf/etc/skel/.mutt/muttrc
+++ /dev/null
@@ -1,60 +0,0 @@
-set config_charset="utf-8"
-# set locale="de_CH"
-set charset="utf-8"
-set send_charset="utf-8"
-set editor="vim"
-set visual=vim
-set auto_tag
-set sort=threads
-
-set sort_browser=reverse-date
-set sort_aux=reverse-last-date-received
-set duplicate_threads=yes
-
-set crypt_use_gpgme=yes
-
-## automatically sign all outgoing messages
-set crypt_autosign=yes
-
-## automatically encrypt outgoing messages
-set crypt_autoencrypt=yes
-
-## automatically verify the sign of a message when opened
-set crypt_verify_sig=yes
-
-set pgp_sign_as=0x8BF422F79FC7C975BDF07828E88440BC35095A74
-#set pgp_sign_as=0x8BF422F7
-set pgp_timeout=1800
-set pgp_autosign=yes
-#set pgp_replyencrypt=yes
-
-source ~/.mutt/gpg.rc
-
-source "~/.mutt/mail_alias"
-set alias_file=~/.mutt/mail_alias
-
-# Header
-set header_cache =~/.mutt/cache/headers
-set message_cachedir =~/.mutt/cache/bodies
-set certificate_file =~/.mutt/certificates
-
-set timeout=10    # mutt 'presses' (like) a key for you 
-                  #(while you're idle) each x sec to trigger 
-                  #the thing below
-set mail_check=5  # mutt checks for new mails on every keystroke
-                  # but not more often then once in 5 seconds
-set beep_new      # beep on new messages in the mailboxes
-
-## Local system account
-folder-hook '.mail' 'source ~/.mutt/system'
-
-## Remote account
-folder-hook '.mailext' 'source ~/.mutt/external'
-
-## Default account
-source ~/.mutt/system
-
-## Shortcuts
-macro index,pager <f3> '<sync-mailbox><enter-command>source ~/.mutt/external<enter><change-folder>!<enter>'
-
-macro index,pager <f2> '<sync-mailbox><enter-command>source ~/.mutt/system<enter><change-folder>!<enter>'
diff --git a/tools/conf/etc/skel/.mutt/system b/tools/conf/etc/skel/.mutt/system
deleted file mode 100644
index ae23778..0000000
--- a/tools/conf/etc/skel/.mutt/system
+++ /dev/null
@@ -1,25 +0,0 @@
-color status green default
-
-set folder="~/.mail"
-set mbox_type=Maildir
-set spoolfile=/var/spool/mail/username
-set keep_flagged=yes
-
-set mbox="~/.mail"           # ~/.mailext/read_inbox
-set postponed="+.Drafts"
-set record="+.Sent"
-
-set use_from=yes
-
-set sendmail=/usr/sbin/exim
-set ssl_starttls=no
-set ssl_force_tls=no
-
-unset pop_user
-unset pop_pass
-unset pop_delete
-unset pop_host
-unset smtp_url
-
-set realname='username'
-set from=username@localhost
diff --git a/tools/conf/etc/skel/.vim/backup/.gitignore b/tools/conf/etc/skel/.vim/backup/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/backup/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/colors/wombat256mod.vim b/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
deleted file mode 100644
index 1137eb8..0000000
--- a/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
+++ /dev/null
@@ -1,96 +0,0 @@
-" Vim color file
-" Original Maintainer:  Lars H. Nielsen (dengmao@gmail.com)
-" Last Change:  2010-07-23
-"
-" Modified version of wombat for 256-color terminals by
-"   David Liang (bmdavll@gmail.com)
-" based on version by
-"   Danila Bespalov (danila.bespalov@gmail.com)
-
-set background=dark
-
-if version > 580
-	hi clear
-	if exists("syntax_on")
-		syntax reset
-	endif
-endif
-
-let colors_name = "wombat256mod"
-
-
-" General colors
-hi Normal		ctermfg=252		ctermbg=234		cterm=none		guifg=#e3e0d7	guibg=#242424	gui=none
-hi Cursor		ctermfg=234		ctermbg=228		cterm=none		guifg=#242424	guibg=#eae788	gui=none
-hi Visual		ctermfg=251		ctermbg=239		cterm=none		guifg=#c3c6ca	guibg=#554d4b	gui=none
-hi VisualNOS	ctermfg=251		ctermbg=236		cterm=none		guifg=#c3c6ca	guibg=#303030	gui=none
-hi Search		ctermfg=177		ctermbg=241		cterm=none		guifg=#d787ff	guibg=#636066	gui=none
-hi Folded		ctermfg=103		ctermbg=237		cterm=none		guifg=#a0a8b0	guibg=#3a4046	gui=none
-hi Title		ctermfg=230						cterm=bold		guifg=#ffffd7					gui=bold
-hi StatusLine	ctermfg=230		ctermbg=238		cterm=none		guifg=#ffffd7	guibg=#444444	gui=italic
-hi VertSplit	ctermfg=238		ctermbg=238		cterm=none		guifg=#444444	guibg=#444444	gui=none
-hi StatusLineNC	ctermfg=241		ctermbg=238		cterm=none		guifg=#857b6f	guibg=#444444	gui=none
-hi LineNr		ctermfg=241		ctermbg=232		cterm=none		guifg=#857b6f	guibg=#080808	gui=none
-hi SpecialKey	ctermfg=241		ctermbg=235		cterm=none		guifg=#626262	guibg=#2b2b2b	gui=none
-hi WarningMsg	ctermfg=203										guifg=#ff5f55
-hi ErrorMsg		ctermfg=196		ctermbg=236		cterm=bold		guifg=#ff2026	guibg=#3a3a3a	gui=bold
-
-" Vim >= 7.0 specific colors
-if version >= 700
-hi CursorLine					ctermbg=236		cterm=none						guibg=#32322f
-hi MatchParen	ctermfg=228		ctermbg=101		cterm=bold		guifg=#eae788	guibg=#857b6f	gui=bold
-hi Pmenu		ctermfg=230		ctermbg=238						guifg=#ffffd7	guibg=#444444
-hi PmenuSel		ctermfg=232		ctermbg=192						guifg=#080808	guibg=#cae982
-endif
-
-" Diff highlighting
-hi DiffAdd						ctermbg=17										guibg=#2a0d6a
-hi DiffDelete	ctermfg=234		ctermbg=60		cterm=none		guifg=#242424	guibg=#3e3969	gui=none
-hi DiffText						ctermbg=53		cterm=none						guibg=#73186e	gui=none
-hi DiffChange					ctermbg=237										guibg=#382a37
-
-"hi CursorIM
-"hi Directory
-"hi IncSearch
-"hi Menu
-"hi ModeMsg
-"hi MoreMsg
-"hi PmenuSbar
-"hi PmenuThumb
-"hi Question
-"hi Scrollbar
-"hi SignColumn
-"hi SpellBad
-"hi SpellCap
-"hi SpellLocal
-"hi SpellRare
-"hi TabLine
-"hi TabLineFill
-"hi TabLineSel
-"hi Tooltip
-"hi User1
-"hi User9
-"hi WildMenu
-
-
-" Syntax highlighting
-hi Keyword		ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
-hi Statement	ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
-hi Constant		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi Number		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi PreProc		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi Function		ctermfg=192		cterm=none		guifg=#cae982	gui=none
-hi Identifier	ctermfg=192		cterm=none		guifg=#cae982	gui=none
-hi Type			ctermfg=186		cterm=none		guifg=#d4d987	gui=none
-hi Special		ctermfg=229		cterm=none		guifg=#eadead	gui=none
-hi String		ctermfg=113		cterm=none		guifg=#95e454	gui=italic
-hi Comment		ctermfg=246		cterm=none		guifg=#9c998e	gui=italic
-hi Todo			ctermfg=101		cterm=none		guifg=#857b6f	gui=italic
-
-
-" Links
-hi! link FoldColumn		Folded
-hi! link CursorColumn	CursorLine
-hi! link NonText		LineNr
-
-" vim:set ts=4 sw=4 noet:
diff --git a/tools/conf/etc/skel/.vim/swap/.gitignore b/tools/conf/etc/skel/.vim/swap/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/swap/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/undodir/.gitignore b/tools/conf/etc/skel/.vim/undodir/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/undodir/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/views/.gitignore b/tools/conf/etc/skel/.vim/views/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/views/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vimrc b/tools/conf/etc/skel/.vimrc
deleted file mode 100644
index fb4445f..0000000
--- a/tools/conf/etc/skel/.vimrc
+++ /dev/null
@@ -1,156 +0,0 @@
-" Use Vim settings, rather than Vi settings (much better!).
-" This must be first, because it changes other options as a side effect.
-set nocompatible
-
-"" allow backspacing over everything in insert mode
-"set backspace=indent,eol,start
-"
-if has("vms")
-  set nobackup		" do not keep a backup file, use versions instead
-else
-  set backup		" keep a backup file (restore to previous version)
-  set undofile		" keep an undo file (undo changes after closing)
-endif
-
-set history=50		" keep 50 lines of command line history
-set ruler		" show the cursor position all the time
-set showcmd		" display incomplete commands
-set incsearch		" do incremental searching
-
-"" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
-"" let &guioptions = substitute(&guioptions, "t", "", "g")
-"
-"" Don't use Ex mode, use Q for formatting
-"map Q gq
-"
-"" CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
-"" so that you can undo CTRL-U after inserting a line break.
-"inoremap <C-U> <C-G>u<C-U>
-"
-"" In many terminal emulators the mouse works just fine, thus enable it.
-"if has('mouse')
-"  set mouse=a
-"endif
-"
-"" Switch syntax highlighting on, when the terminal has colors
-"" Also switch on highlighting the last used search pattern.
-
-" colorscheme desert
-set t_Co=256
-if &t_Co > 2 || has("gui_running")
-  syntax on
-  set hlsearch
-  set background=dark
-  colorscheme wombat256mod
-  " colorscheme desert
-  :hi SpellBad ctermfg=Black guifg=Black
-endif
-
-
-"" Only do this part when compiled with support for autocommands.
-if has("autocmd")
-"
-"  " Enable file type detection.
-"  " Use the default filetype settings, so that mail gets 'tw' set to 72,
-"  " 'cindent' is on in C files, etc.
-"  " Also load indent files, to automatically do language-dependent indenting.
-  filetype plugin indent on
-"
-"  " Put these in an autocmd group, so that we can delete them easily.
-  augroup vimrcEx
-  au!
-"
-"  " For all text files set 'textwidth' to 78 characters.
-"  autocmd FileType text setlocal textwidth=78
-"
-"  " When editing a file, always jump to the last known cursor position.
-"  " Don't do it when the position is invalid or when inside an event handler
-"  " (happens when dropping a file on gvim).
-  autocmd BufReadPost *
-    \ if line("'\"") >= 1 && line("'\"") <= line("$") |
-    \   exe "normal! g`\"" |
-    \ endif
-
-  augroup END
-
-else
-  set autoindent		" always set autoindenting on
-
-endif " has("autocmd")
-
-"" Convenient command to see the difference between the current buffer and the
-"" file it was loaded from, thus the changes you made.
-"" Only define it when not defined already.
-"if !exists(":DiffOrig")
-"  command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
-"		  \ | wincmd p | diffthis
-"endif
-"
-"if has('langmap') && exists('+langnoremap')
-"  " Prevent that the langmap option applies to characters that result from a
-"  " mapping.  If unset (default), this may break plugins (but it's backward
-"  " compatible).
-"  set langnoremap
-"endif
-
-" Search down into subfolders
-" Provides tab-completion for all file-related tasks
-set path+=**
-
-" Display all matching files when we tab complete
-set wildmenu
-
-" Better file browsing
-let g:netrw_banner=0        " disable annoying banner
-let g:netrw_browse_split=4  " open in prior window
-let g:netrw_altv=1          " open splits to the right
-let g:netrw_liststyle=3     " tree view
-let g:netrw_list_hide=netrw_gitignore#Hide()
-let g:netrw_list_hide.=',\(^\|\s\s\)\zs\.\S\+'
-
-
-map <F2> :tabnew
-map <F3> :tabprevious<CR>
-map <F4> :tabnext<CR>
-"
-"" Show Line Numbers
-set relativenumber
-set complete=.,b,u,]
-set wildmode=longest,list:longest
-set completeopt=menu,preview
-"
-"" Directories
-set backupdir=~/.vim/backup
-set undodir=~/.vim/undodir
-set viewdir=~/.vim/views
-set directory=~/.vim/swap
-"
-"" Spell Check
-set spell spelllang=en_us
-"
-"" Strips whitespace
-nnoremap <leader>W :%s/\s\+$//<cr>:let @/=''<CR>
-"
-"" Whitespace fixes
-highlight ExtraWhitespace ctermbg=red guibg=red
-
-match ExtraWhitespace /\s\+$/
-autocmd BufWinEnter * match ExtraWhitespace /\s\+$/
-autocmd InsertEnter * match ExtraWhitespace /\s\+\%#\@<!$/
-autocmd InsertLeave * match ExtraWhitespace /\s\+$/
-autocmd BufWinLeave * call clearmatches()
-"
-"
-"" For tab characters that appear 4-spaces-wide
-"set tabstop=4
-"" If you're using actual tab character in your source code you probably also 
-"" want these settings (these are actually the defaults,set them defensively):
-"set softtabstop=0 noexpandtab
-"" Finally, if you want an indent to correspond to a single tab, you should also use:
-""set shiftwidth=4
-"" For indents that consist of 4 space characters but are entered with the tab key:
-set tabstop=8 softtabstop=0 expandtab shiftwidth=4 smarttab
-"set list
-"" set past gives problems with tabs
-"" set paste
-""
diff --git a/tools/conf/etc/skel/.xinitrc b/tools/conf/etc/skel/.xinitrc
deleted file mode 100644
index 379a315..0000000
--- a/tools/conf/etc/skel/.xinitrc
+++ /dev/null
@@ -1,13 +0,0 @@
-#xrandr --output eDP1 --mode 1024x768
-#xrandr -s 1366x768
-#xrandr --dpi 73
-#xrandr --dpi 96
-#xgamma -gamma 0.8
-setxkbmap dvorak
-#syndaemon -d
-#
-## Start the window manager
-
-#exec openbox-session
-#exec start-mate
-exec spectrwm