diff options
Diffstat (limited to 'tools')
| -rwxr-xr-x | tools/conf/etc/rc.d/postgresql | 16 | ||||
| -rw-r--r-- | tools/conf/srv/pgsql/data/pg_hba.conf | 96 | ||||
| -rw-r--r-- | tools/postgresql.html | 165 | ||||
| -rw-r--r-- | tools/scripts/install-postgres.sh | 16 |
4 files changed, 203 insertions, 90 deletions
diff --git a/tools/conf/etc/rc.d/postgresql b/tools/conf/etc/rc.d/postgresql new file mode 100755 index 0000000..5f0762a --- /dev/null +++ b/tools/conf/etc/rc.d/postgresql @@ -0,0 +1,16 @@ +# +# /etc/rc.d/postgresql: start, stop or restart PostgreSQL server postmaster +# + +PG_DATA=/srv/pgsql/data + +case "$1" in + start|stop|status|restart|reload) + sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/postgresql "$1" + ;; + *) + echo "usage: $0 start|stop|restart|reload|status" + ;; +esac + +# End of file diff --git a/tools/conf/srv/pgsql/data/pg_hba.conf b/tools/conf/srv/pgsql/data/pg_hba.conf new file mode 100644 index 0000000..34587d4 --- /dev/null +++ b/tools/conf/srv/pgsql/data/pg_hba.conf @@ -0,0 +1,96 @@ +# PostgreSQL Client Authentication Configuration File +# =================================================== +# +# Refer to the "Client Authentication" section in the PostgreSQL +# documentation for a complete description of this file. A short +# synopsis follows. +# +# This file controls: which hosts are allowed to connect, how clients +# are authenticated, which PostgreSQL user names they can use, which +# databases they can access. Records take one of these forms: +# +# local DATABASE USER METHOD [OPTIONS] +# host DATABASE USER ADDRESS METHOD [OPTIONS] +# hostssl DATABASE USER ADDRESS METHOD [OPTIONS] +# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS] +# +# (The uppercase items must be replaced by actual values.) +# +# The first field is the connection type: "local" is a Unix-domain +# socket, "host" is either a plain or SSL-encrypted TCP/IP socket, +# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a +# plain TCP/IP socket. +# +# DATABASE can be "all", "sameuser", "samerole", "replication", a +# database name, or a comma-separated list thereof. The "all" +# keyword does not match "replication". Access to replication +# must be enabled in a separate record (see example below). +# +# USER can be "all", a user name, a group name prefixed with "+", or a +# comma-separated list thereof. In both the DATABASE and USER fields +# you can also write a file name prefixed with "@" to include names +# from a separate file. +# +# ADDRESS specifies the set of hosts the record matches. It can be a +# host name, or it is made up of an IP address and a CIDR mask that is +# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that +# specifies the number of significant bits in the mask. A host name +# that starts with a dot (.) matches a suffix of the actual host name. +# Alternatively, you can write an IP address and netmask in separate +# columns to specify the set of hosts. Instead of a CIDR-address, you +# can write "samehost" to match any of the server's own IP addresses, +# or "samenet" to match any address in any subnet that the server is +# directly connected to. +# +# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi", +# "ident", "peer", "pam", "ldap", "radius" or "cert". Note that +# "password" sends passwords in clear text; "md5" is preferred since +# it sends encrypted passwords. +# +# OPTIONS are a set of options for the authentication in the format +# NAME=VALUE. The available options depend on the different +# authentication methods -- refer to the "Client Authentication" +# section in the documentation for a list of which options are +# available for which authentication methods. +# +# Database and user names containing spaces, commas, quotes and other +# special characters must be quoted. Quoting one of the keywords +# "all", "sameuser", "samerole" or "replication" makes the name lose +# its special character, and just match a database or username with +# that name. +# +# This file is read on server startup and when the postmaster receives +# a SIGHUP signal. If you edit the file on a running system, you have +# to SIGHUP the postmaster for the changes to take effect. You can +# use "pg_ctl reload" to do that. + +# Put your actual configuration here +# ---------------------------------- +# +# If you want to allow non-local connections, you need to add more +# "host" records. In that case you will also need to make PostgreSQL +# listen on a non-local interface via the listen_addresses +# configuration parameter, or via the -i or -h command line switches. + +# CAUTION: Configuring the system for local "trust" authentication +# allows any local user to connect as any PostgreSQL user, including +# the database superuser. If you do not trust all your local users, +# use another authentication method. + + +# TYPE DATABASE USER ADDRESS METHOD + +# "local" is for Unix domain socket connections only +#local all all trust +local all postgres ident +# IPv4 local connections: +#host all all 127.0.0.1/32 trust +hostssl all all 127.0.0.1/32 md5 + +# IPv6 local connections: +#host all all ::1/128 trust +# Allow replication connections from localhost, by a user with the +# replication privilege. +#local replication postgres trust +#host replication postgres 127.0.0.1/32 trust +#host replication postgres ::1/128 trust diff --git a/tools/postgresql.html b/tools/postgresql.html index e160ae2..b8790e2 100644 --- a/tools/postgresql.html +++ b/tools/postgresql.html @@ -11,53 +11,22 @@ <h1>Postgresql</h1> - <h2 id="install">1.1. Install Postgresql</h2> + <h2 id="install">1. Install Postgresql</h2> - <pre> - $ prt-get depinst postgresql - </pre> - - <p>Mount Point;</p> - - <pre> - # mkdir -p /srv/pgsql - # mount /srv/pgsql - </pre> - - <p>Create user;</p> - - <pre> - # useradd -U -m -d /srv/pgsql -s /bin/false postgres - useradd: warning: the home directory already exists. - Not copying any file from skel directory into it. - </pre> + <p>Install postgresql;</p> <pre> - # passwd -l postgres - passwd: password expiry information changed. - # touch /var/log/pgsql - # chown -R postgres:postgres /srv/pgsql /var/log/pgsql - # ldconfig /user/lib/postgresql - </pre> - - $ sudo -u postgres mkdir -p /srv/pgsql/data - # sudo -u postgres touch /srv/pgsql/.psql_history + $ prt-get depinst postgresql </pre> - <p>Create /etc/logrotate.d/postgres;</p> - <pre> - /var/log/pgsql { - weekly - compress - delaycompress - rotate 10 - notifempty - create 660 postgres postgres - } + # mkdir /srv/pgsql/ + # touch /var/log/postgresql + # chown postgres:postgres /srv/pgsql /var/log/postgresql + # sudo -u postgres initdb -D /srv/pgsql/data </pre> - <p>Edit /etc/rc.d/postgresql;</p> + <p>Change <a href="conf/etc/rc.d/postgresql">/etc/rc.d/postgresql</a>;</p> <pre> # @@ -65,25 +34,20 @@ # PG_DATA=/srv/pgsql/data - PG_HOME=/srv/pgsql case "$1" in - start|stop|status|restart|reload) - (cd $PG_HOME && sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/pgsql "$1") - ;; - *) - echo "usage: $0 start|stop|restart|reload|status" - ;; + start|stop|status|restart|reload) + sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/postgresql "$1" + ;; + *) + echo "usage: $0 start|stop|restart|reload|status" + ;; esac # End of file </pre> - <h2 id="config">1.2. Configure Server</h2> - - <pre> - # sudo -u postgres initdb -D /srv/pgsql/data - </pre> + <h2 id="config">2. Configure Server</h2> <p>Create password for super user;</p> @@ -92,17 +56,9 @@ $ psql -U postgres </pre> - <p>Edit /pgsql/data/<a href="../conf/srv/pgsql/data/postgresql.conf">postgresql.conf</a>;</p> - - <pre> - log_destination = 'syslog' # Can specify multiple destinations - syslog_facility='LOCAL0' - syslog_ident='postgres' - log_connections = on - password_encryption=on - </pre> - - <p>Edit /srv/pgsql/data/<a href="../conf/srv/pgsql/data/pg_hba.conf">pg_hba.conf</a>;</p> + <p>Edit + <a href="conf/srv/pgsql/data/pg_hba.conf">/srv/pgsql/data/pg_hba.conf</a>; + </p> <pre> # TYPE DATABASE USER ADDRESS METHOD @@ -121,62 +77,89 @@ #host replication postgres ::1/128 trust </pre> + <p>Start server and alter postgres password</p> + + <pre> + # /etc/rc.d/postgresql start + </pre> + + <pre> + postgres=# alter user postgres with password 'new_password'; + </pre> + + <h3 id="syslog">2.1. Configure syslog-ng</h3> + <p><a href="syslog-ng.html">Configure Syslog-ng</a>, check <a href="http://michael.otacoo.com/postgresql-2/postgres-settings-simple-syslog-configuration-with-syslog-ng/">Michael at otacoo</a> article. Example;</p> + <p>Edit /pgsql/data/<a href="../conf/srv/pgsql/data/postgresql.conf">postgresql.conf</a>;</p> + <pre> - destination postgres { file("/var/log/pgsql"); }; - filter f_postgres { facility(local0); }; - log { source(s_log); filter(f_postgres); destination(postgres); }; + log_destination = 'syslog' # Can specify multiple destinations + syslog_facility='LOCAL0' + syslog_ident='postgres' + log_connections = on + password_encryption=on </pre> - <p>Start server and alter postgres password</p> + + <p>Create /etc/logrotate.d/postgres;</p> <pre> - # /etc/rc.d/postgresql start + /var/log/pgsql { + weekly + compress + delaycompress + rotate 10 + notifempty + create 660 postgres postgres + } </pre> + <pre> - postgres=# alter user postgres with password 'new_password'; + destination postgres { file("/var/log/pgsql"); }; + filter f_postgres { facility(local0); }; + log { source(s_log); filter(f_postgres); destination(postgres); }; </pre> - <h2 id="createuser">1.3. Create User</h2> + + <h2 id="createuser">3. Create User</h2> <p>Create a new user with createuser command;</p> <pre> $ sudo -u postgres createuser --pwprompt --encrypted \ - --no-createrole --no-createdb laravel_user + --no-createrole --no-createdb flyspray Enter password for new user: Enter it again: </pre> - <h2 id="createdb">1.4. Create Database</h2> + <h2 id="createdb">4. Create Database</h2> <p>Create a new database for new user with createdb command;</p> <pre> $ sudo -u postgres createdb --template=template0 --encoding=UTF8 \ - --owner=laravel_user laravel_db + --owner=flyspray db_flyspray </pre> - <h2 id="dropdb">1.5. Drop Database</h2> + <h2 id="dropdb">5. Drop Database</h2> <p>Deleting database with dropdb command;</p> <pre> - sudo -u postgres dropdb laravel_db + sudo -u postgres dropdb db_flyspray </pre> - <h2 id="dropuser">1.6. Drop User</h2> + <h2 id="dropuser">6. Drop User</h2> <p>Deleting user with dropuser command;</p> <pre> - sudo -u postgres dropuser laravel_user + sudo -u postgres dropuser flyspray </pre> - - <h2 id="psql">1.7. Psql</h2> + <h2 id="psql">7. Psql</h2> <p>Lets check with psql, login with user postgres;</p> @@ -190,7 +173,7 @@ postgres=# \? </pre> - <h3 id="listdb">Psql - List Databases and Roles</h3> + <h3 id="listdb">7.1. List Databases and Roles</h3> <p>List roles then list databases;</p> @@ -199,39 +182,43 @@ postgres=# \l </pre> - <h3 id="psqldb">Psql - Create Database</h3> + <h3 id="psqldb">7.2. Create Database</h3> <pre> - postgres=# create database laravel_db_ext owner laravel_user encoding 'UTF-8' template template0; + postgres=# create database db_flyspray_ext owner flyspray encoding 'UTF-8' template template0; </pre> - <h3 id="droptables">Psql - Drop Tables</h3> + <h3 id="droptables">7.3. Drop Tables</h3> <p>This example assumes that all tables, are in public schema. First connect to database and list tables;</p> <pre> - postgres=# \c laravel_db + postgres=# revoke SELECT on db_flyspray from flyspray; + </pre> + + <pre> + postgres=# \c db_flyspray postgres=# \dt </pre> <p>Drop all tables on public schema and recreate public schema;</p> <pre> - laravel_db=# drop schema public cascade; - laravel_db=# create schema public; + db_flyspray=# drop schema public cascade; + db_flyspray=# create schema public; </pre> - <h3 id="backup">Backup</h3> + <h3 id="backup">7.4. Backup</h3> <p>Backup Database</p> - <h3 id="backup">Restore</h3> + <h3 id="backup">7.5. Restore</h3> <pre> - $ psql laravel_db < database_dump + $ psql db_flyspray < database_dump </pre> <a href="index.html">Tools Index</a> @@ -242,7 +229,5 @@ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p> - - </body> </html> diff --git a/tools/scripts/install-postgres.sh b/tools/scripts/install-postgres.sh new file mode 100644 index 0000000..06666e0 --- /dev/null +++ b/tools/scripts/install-postgres.sh @@ -0,0 +1,16 @@ +#!/bin/sh + +. `dirname $0`/config-install.sh + +prt-get depinst postgresql + +cp -R $CONF_DIR/etc/rc.d/postgresql /etc/rc.d/ + +mkdir /srv/pgsql/ +touch /var/log/postgresql +chown postgres:postgres /srv/pgsql /var/log/postgresql + +sudo -u postgres initdb -D /srv/pgsql/data + +cp $CONF_DIR/srv/pgsql/data/pg_hba.conf /srv/pgsql/data/ +chown postgres:postgres /srv/pgsql/data/pg_hba.conf |