path: root/src/omemo/store.h

/*
 * store.h
 * vim: expandtab:ts=4:sts=4:sw=4
 *
 * Copyright (C) 2019 Paul Fariello <paul@fariello.eu>
 *
 * This file is part of Profanity.
 *
 * Profanity is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * Profanity is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with Profanity.  If not, see <https://www.gnu.org/licenses/>.
 *
 * In addition, as a special exception, the copyright holders give permission to
 * link the code of portions of this program with the OpenSSL library under
 * certain conditions as described in each individual source file, and
 * distribute linked combinations including the two.
 *
 * You must obey the GNU General Public License in all respects for all of the
 * code used other than OpenSSL. If you modify file(s) with this exception, you
 * may extend this exception to your version of the file(s), but you are not
 * obligated to do so. If you do not wish to do so, delete this exception
 * statement from your version. If you delete this exception statement from all
 * source files in the program, then also delete it here.
 *
 */
#include <signal/signal_protocol.h>

#include "config.h"

#define OMEMO_STORE_GROUP_IDENTITY "identity"
#define OMEMO_STORE_GROUP_PREKEYS "prekeys"
#define OMEMO_STORE_GROUP_SIGNED_PREKEYS "signed_prekeys"
#define OMEMO_STORE_KEY_DEVICE_ID "device_id"
#define OMEMO_STORE_KEY_REGISTRATION_ID "registration_id"
#define OMEMO_STORE_KEY_IDENTITY_KEY_PUBLIC "identity_key_public"
#define OMEMO_STORE_KEY_IDENTITY_KEY_PRIVATE "identity_key_private"

typedef struct {
   signal_buffer *public;
   signal_buffer *private;
   uint32_t registration_id;
   GHashTable *trusted;
   bool recv;
} identity_key_store_t;

GHashTable * session_store_new(void);
GHashTable * pre_key_store_new(void);
GHashTable * signed_pre_key_store_new(void);
void identity_key_store_new(identity_key_store_t *identity_key_store);

/**
 * Returns a copy of the serialized session record corresponding to the
 * provided recipient ID + device ID tuple.
 *
 * @param record pointer to a freshly allocated buffer containing the
 *     serialized session record. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @param address the address of the remote client
 * @return 1 if the session was loaded, 0 if the session was not found, negative on failure
 */
#ifdef HAVE_LIBSIGNAL_LT_2_3_2
int load_session(signal_buffer **record, const signal_protocol_address *address, void *user_data);
#else
int load_session(signal_buffer **record, signal_buffer **user_record, const signal_protocol_address *address, void *user_data);
#endif

/**
 * Returns all known devices with active sessions for a recipient
 *
 * @param pointer to an array that will be allocated and populated with the result
 * @param name the name of the remote client
 * @param name_len the length of the name
 * @return size of the sessions array, or negative on failure
 */
int get_sub_device_sessions(signal_int_list **sessions, const char *name, size_t name_len, void *user_data);

/**
 * Commit to storage the session record for a given
 * recipient ID + device ID tuple.
 *
 * @param address the address of the remote client
 * @param record pointer to a buffer containing the serialized session
 *     record for the remote client
 * @param record_len length of the serialized session record
 * @return 0 on success, negative on failure
 */
#ifdef HAVE_LIBSIGNAL_LT_2_3_2
int store_session(const signal_protocol_address *address, uint8_t *record, size_t record_len, void *user_data);
#else
int store_session(const signal_protocol_address *address, uint8_t *record, size_t record_len, uint8_t *user_record, size_t user_record_len, void *user_data);
#endif

/**
 * Determine whether there is a committed session record for a
 * recipient ID + device ID tuple.
 *
 * @param address the address of the remote client
 * @return 1 if a session record exists, 0 otherwise.
 */
int contains_session(const signal_protocol_address *address, void *user_data);

/**
 * Remove a session record for a recipient ID + device ID tuple.
 *
 * @param address the address of the remote client
 * @return 1 if a session was deleted, 0 if a session was not deleted, negative on error
 */
int delete_session(const signal_protocol_address *address, void *user_data);

/**
 * Remove the session records corresponding to all devices of a recipient ID.
 *
 * @param name the name of the remote client
 * @param name_len the length of the name
 * @return the number of deleted sessions on success, negative on failure
 */
int delete_all_sessions(const char *name, size_t name_len, void *user_data);

/**
 * Load a local serialized PreKey record.
 *
 * @param record pointer to a newly allocated buffer containing the record,
 *     if found. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @param pre_key_id the ID of the local serialized PreKey record
 * @retval SG_SUCCESS if the key was found
 * @retval SG_ERR_INVALID_KEY_ID if the key could not be found
 */
int load_pre_key(signal_buffer **record, uint32_t pre_key_id, void *user_data);

/**
 * Store a local serialized PreKey record.
 *
 * @param pre_key_id the ID of the PreKey record to store.
 * @param record pointer to a buffer containing the serialized record
 * @param record_len length of the serialized record
 * @return 0 on success, negative on failure
 */
int store_pre_key(uint32_t pre_key_id, uint8_t *record, size_t record_len, void *user_data);

/**
 * Determine whether there is a committed PreKey record matching the
 * provided ID.
 *
 * @param pre_key_id A PreKey record ID.
 * @return 1 if the store has a record for the PreKey ID, 0 otherwise
 */
int contains_pre_key(uint32_t pre_key_id, void *user_data);

/**
 * Delete a PreKey record from local storage.
 *
 * @param pre_key_id The ID of the PreKey record to remove.
 * @return 0 on success, negative on failure
 */
int remove_pre_key(uint32_t pre_key_id, void *user_data);

/**
 * Load a local serialized signed PreKey record.
 *
 * @param record pointer to a newly allocated buffer containing the record,
 *     if found. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @param signed_pre_key_id the ID of the local signed PreKey record
 * @retval SG_SUCCESS if the key was found
 * @retval SG_ERR_INVALID_KEY_ID if the key could not be found
 */
int load_signed_pre_key(signal_buffer **record, uint32_t signed_pre_key_id, void *user_data);

/**
 * Store a local serialized signed PreKey record.
 *
 * @param signed_pre_key_id the ID of the signed PreKey record to store
 * @param record pointer to a buffer containing the serialized record
 * @param record_len length of the serialized record
 * @return 0 on success, negative on failure
 */
int store_signed_pre_key(uint32_t signed_pre_key_id, uint8_t *record, size_t record_len, void *user_data);

/**
 * Determine whether there is a committed signed PreKey record matching
 * the provided ID.
 *
 * @param signed_pre_key_id A signed PreKey record ID.
 * @return 1 if the store has a record for the signed PreKey ID, 0 otherwise
 */
int contains_signed_pre_key(uint32_t signed_pre_key_id, void *user_data);

/**
 * Delete a SignedPreKeyRecord from local storage.
 *
 * @param signed_pre_key_id The ID of the signed PreKey record to remove.
 * @return 0 on success, negative on failure
 */
int remove_signed_pre_key(uint32_t signed_pre_key_id, void *user_data);

/**
 * Get the local client's identity key pair.
 *
 * @param public_data pointer to a newly allocated buffer containing the
 *     public key, if found. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @param private_data pointer to a newly allocated buffer containing the
 *     private key, if found. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @return 0 on success, negative on failure
 */
int get_identity_key_pair(signal_buffer **public_data, signal_buffer **private_data, void *user_data);

/**
 * Return the local client's registration ID.
 *
 * Clients should maintain a registration ID, a random number
 * between 1 and 16380 that's generated once at install time.
 *
 * @param registration_id pointer to be set to the local client's
 *     registration ID, if it was successfully retrieved.
 * @return 0 on success, negative on failure
 */
int get_local_registration_id(void *user_data, uint32_t *registration_id);

/**
 * Save a remote client's identity key
 * <p>
 * Store a remote client's identity key as trusted.
 * The value of key_data may be null. In this case remove the key data
 * from the identity store, but retain any metadata that may be kept
 * alongside it.
 *
 * @param address the address of the remote client
 * @param key_data Pointer to the remote client's identity key, may be null
 * @param key_len Length of the remote client's identity key
 * @return 0 on success, negative on failure
 */
int save_identity(const signal_protocol_address *address, uint8_t *key_data, size_t key_len, void *user_data);

/**
 * Verify a remote client's identity key.
 *
 * Determine whether a remote client's identity is trusted.  Convention is
 * that the TextSecure protocol is 'trust on first use.'  This means that
 * an identity key is considered 'trusted' if there is no entry for the recipient
 * in the local store, or if it matches the saved key for a recipient in the local
 * store.  Only if it mismatches an entry in the local store is it considered
 * 'untrusted.'
 *
 * @param address the address of the remote client
 * @param identityKey The identity key to verify.
 * @param key_data Pointer to the identity key to verify
 * @param key_len Length of the identity key to verify
 * @return 1 if trusted, 0 if untrusted, negative on failure
 */
int is_trusted_identity(const signal_protocol_address *address, uint8_t *key_data, size_t key_len, void *user_data);

/**
 * Store a serialized sender key record for a given
 * (groupId + senderId + deviceId) tuple.
 *
 * @param sender_key_name the (groupId + senderId + deviceId) tuple
 * @param record pointer to a buffer containing the serialized record
 * @param record_len length of the serialized record
 * @return 0 on success, negative on failure
 */
int store_sender_key(const signal_protocol_sender_key_name *sender_key_name, uint8_t *record, size_t record_len, uint8_t *user_record, size_t user_record_len, void *user_data);

/**
 * Returns a copy of the sender key record corresponding to the
 * (groupId + senderId + deviceId) tuple.
 *
 * @param record pointer to a newly allocated buffer containing the record,
 *     if found. Unset if no record was found.
 *     The Signal Protocol library is responsible for freeing this buffer.
 * @param sender_key_name the (groupId + senderId + deviceId) tuple
 * @return 1 if the record was loaded, 0 if the record was not found, negative on failure
 */
int load_sender_key(signal_buffer **record, signal_buffer **user_record, const signal_protocol_sender_key_name *sender_key_name, void *user_data);