diff options
Diffstat (limited to 'etc/ncmpcpp/config')
| -rw-r--r-- | etc/ncmpcpp/config | 532 |
1 files changed, 532 insertions, 0 deletions
diff --git a/etc/ncmpcpp/config b/etc/ncmpcpp/config new file mode 100644 index 0000000..cb689a8 --- /dev/null +++ b/etc/ncmpcpp/config @@ -0,0 +1,532 @@ +ncmpcpp_directory = ~/etc/ncmpcpp +# +## +## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other +## MPD clients (eg. ncmpc) also use that location. +## +# +lyrics_directory = ~/share/lyrics +# +##### connection settings ##### +# +#mpd_host = 127.0.0.1 +# +#mpd_port = 6600 +# +#mpd_connection_timeout = 5 +# +## Needed for tag editor and file operations to work. +## +mpd_music_dir = "~/share/xdg/mus" +# +#mpd_crossfade_time = 5 +# +##### music visualizer ##### +## +## Note: In order to make music visualizer work you'll need to use mpd fifo +## output, whose format parameter has to be set to 44100:16:1 for mono +## visualization or 44100:16:2 for stereo visualization. Example configuration +## (it has to be put into mpd.conf): +## +## audio_output { +## type "fifo" +## name "Visualizer feed" +## path "/tmp/mpd.fifo" +## format "44100:16:2" +## } +## +# +#visualizer_fifo_path = /tmp/mpd.fifo +# +## +## Note: Below parameter is needed for ncmpcpp to determine which output +## provides data for visualizer and thus allow syncing between visualization and +## sound as currently there are some problems with it. +## +# +#visualizer_output_name = Visualizer feed +# +## +## If you set format to 44100:16:2, make it 'yes'. +## +#visualizer_in_stereo = yes +# +## +## Note: Below parameter defines how often ncmpcpp has to "synchronize" +## visualizer and audio outputs. 30 seconds is optimal value, but if you +## experience synchronization problems, set it to lower value. Keep in mind +## that sane values start with >=10. +## +# +#visualizer_sync_interval = 30 +# +## +## Note: To enable spectrum frequency visualization you need to compile ncmpcpp +## with fftw3 support. +## +# +## Available values: spectrum, wave, wave_filled, ellipse. +## +#visualizer_type = wave +# +#visualizer_look = ●卐 +#visualizer_look = 卐 +# +#visualizer_color = blue, cyan, green, yellow, magenta, red +# +## Alternative subset of 256 colors for terminals that support it. +## +#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161 +# +##### system encoding ##### +## +## ncmpcpp should detect your charset encoding but if it failed to do so, you +## can specify charset encoding you are using here. +## +## Note: You can see whether your ncmpcpp build supports charset detection by +## checking output of `ncmpcpp --version`. +## +## Note: Since MPD uses UTF-8 by default, setting this option makes sense only +## if your encoding is different. +## +# +#system_encoding = "" +# +##### delays ##### +# +## Time of inactivity (in seconds) after playlist highlighting will be disabled +## (0 = always on). +## +#playlist_disable_highlight_delay = 5 +# +## Defines how long messages are supposed to be visible. +## +message_delay_time = 1 +# +##### song format ##### +## +## For a song format you can use: +## +## %l - length +## %f - filename +## %D - directory +## %a - artist +## %A - album artist +## %t - title +## %b - album +## %y - date +## %n - track number (01/12 -> 01) +## %N - full track info (01/12 -> 01/12) +## %g - genre +## %c - composer +## %p - performer +## %d - disc +## %C - comment +## %P - priority +## $R - begin right alignment +## +## If you want to make sure that a part of the format is displayed only when +## certain tags are present, you can archieve it by grouping them with brackets, +## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are +## present or '' otherwise. It is also possible to define a list of +## alternatives by providing several groups and separating them with '|', +## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is +## not present. +## +## Note: If you want to set limit on maximal length of a tag, just put the +## appropriate number between % and character that defines tag type, e.g. to +## make album take max. 20 terminal cells, use '%20b'. +## +## In addition, formats support markers used for text attributes. They are +## followed by character '$'. After that you can put: +## +## - 0 - default window color (discards all other colors) +## - 1 - black +## - 2 - red +## - 3 - green +## - 4 - yellow +## - 5 - blue +## - 6 - magenta +## - 7 - cyan +## - 8 - white +## - 9 - end of current color +## - b - bold text +## - u - underline text +## - r - reverse colors +## - a - use alternative character set +## +## If you don't want to use a non-color attribute anymore, just put it again, +## but this time insert character '/' between '$' and attribute character, +## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with +## reversed colors. +## +## If you want to use 256 colors and/or background colors in formats (the naming +## scheme is described below in section about color definitions), it can be done +## with the syntax $(COLOR), e.g. to set the artist tag to one of the +## non-standard colors and make it have yellow background, you need to write +## $(197_yellow)%a$(end). Note that for standard colors this is interchangable +## with attributes listed above. +## +## Note: colors can be nested. +## +# +song_list_format = {$4%a - }{%t}|{$8%f$9}$R{$3(%l)$9} +# +song_status_format = $b{{$8"%t"}} $3by {$4%a{ $3in $7%b{ (%y)}} $3}|{$8%f} +# +song_library_format = {%n - }{%t}|{%f} +# +alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b +# +alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D} +# +current_item_prefix = $(cyan)$r$b +# +current_item_suffix = $/r$(end)$/b +# +current_item_inactive_column_prefix = $(magenta)$r +# +current_item_inactive_column_suffix = $/r$(end) +# +#now_playing_prefix = $b +# +#now_playing_suffix = $/b +# +#browser_playlist_prefix = "$2playlist$9 " +# +#selected_item_prefix = $6 +# +#selected_item_suffix = $9 +# +#modified_item_prefix = $3> $9 +# +## +## Note: attributes are not supported for the following variables. +## +#song_window_title_format = {%a - }{%t}|{%f} +## +## Note: Below variables are used for sorting songs in browser. The sort mode +## determines how songs are sorted, and can be used in combination with a sort +## format to specify a custom sorting format. Available values for +## browser_sort_mode are "name", "mtime", "format" and "noop". +## +# +#browser_sort_mode = name +# +#browser_sort_format = {%a - }{%t}|{%f} {(%l)} +# +##### columns settings ##### +## +## syntax of song columns list format is "column column etc." +## +## - syntax for each column is: +## +## (width of the column)[color of the column]{displayed tag} +## +## Note: Width is by default in %, if you want a column to have fixed size, add +## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of +## screen (so the real width will depend on actual screen size), whereas +## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen +## is. +## +## - color is optional (if you want the default one, leave the field empty). +## +## Note: You can give a column additional attributes by putting appropriate +## character after displayed tag character. Available attributes are: +## +## - r - column will be right aligned +## - E - if tag is empty, empty tag marker won't be displayed +## +## You can also: +## +## - give a column custom name by putting it after attributes, separated with +## character ':', e.g. {lr:Length} gives you right aligned column of lengths +## named "Length". +## +## - define sequence of tags, that have to be displayed in case predecessor is +## empty in a way similar to the one in classic song format, i.e. using '|' +## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to +## display artist tag and then composer and performer if previous ones are not +## available. +## +# +#song_columns_list_format = (20)[]{a} (6f)[green]{NE} (50)[white]{t|f:Title} (20)[cyan]{b} (7f)[magenta]{l} +# +##### various settings ##### +# +## +## Note: Custom command that will be executed each time song changes. Useful for +## notifications etc. +## +execute_on_song_change = "notif -t mpd -s 3 "MPD: Now Playing" "$(mpc current)"" +# +## +## Note: Custom command that will be executed each time player state +## changes. The environment variable MPD_PLAYER_STATE is set to the current +## state (either unknown, play, pause, or stop) for its duration. +## +# +#execute_on_player_state_change = +# +#playlist_show_mpd_host = no +# +#playlist_show_remaining_time = no +# +#playlist_shorten_total_times = no +# +#playlist_separate_albums = no +# +## +## Note: Possible display modes: classic, columns. +## +playlist_display_mode = columns +# +browser_display_mode = columns +# +#search_engine_display_mode = classic +# +#playlist_editor_display_mode = classic +# +#discard_colors_if_item_is_selected = yes +# +#show_duplicate_tags = true +# +#incremental_seeking = yes +# +#seek_time = 1 +# +#volume_change_step = 2 +# +#autocenter_mode = no +# +#centered_cursor = no +# +## +## Note: You can specify third character which will be used to build 'empty' +## part of progressbar. +## +progressbar_look = -> +# +## Available values: database, playlist. +## +#default_place_to_search_in = database +# +## Available values: classic, alternative. +## +#user_interface = classic +# +#data_fetching_delay = yes +# +## Available values: artist, album_artist, date, genre, composer, performer. +## +media_library_primary_tag = album_artist +# +media_library_albums_split_by_date = yes +# +## Available values: wrapped, normal. +## +#default_find_mode = wrapped +# +#default_tag_editor_pattern = %n - %t +# +#header_visibility = yes +# +#statusbar_visibility = yes +# +#titles_visibility = yes +# +#header_text_scrolling = yes +# +#cyclic_scrolling = no +# +#lines_scrolled = 2 +# +#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet +# +#follow_now_playing_lyrics = no +# +#fetch_lyrics_for_current_song_in_background = no +# +#store_lyrics_in_song_dir = no +# +#generate_win32_compatible_filenames = yes +# +#allow_for_physical_item_deletion = no +# +## +## Note: If you set this variable, ncmpcpp will try to get info from last.fm in +## language you set and if it fails, it will fall back to english. Otherwise it +## will use english the first time. +## +## Note: Language has to be expressed as an ISO 639 alpha-2 code. +## +#lastfm_preferred_language = en +# +#space_add_mode = add_remove +# +#show_hidden_files_in_local_browser = no +# +## +## How shall screen switcher work? +## +## - "previous" - switch between the current and previous screen. +## - "screen1,...,screenN" - switch between given sequence of screens. +## +## Screens available for use: help, playlist, browser, search_engine, +## media_library, playlist_editor, tag_editor, outputs, visualizer, clock, +## lyrics, last_fm. +## +#screen_switcher_mode = playlist, browser +# +## +## Note: You can define startup screen by choosing screen from the list above. +## +startup_screen = media_library +# +## +## Note: You can define startup slave screen by choosing screen from the list +## above or an empty value for no slave screen. +## +#startup_slave_screen = "" +# +#startup_slave_screen_focus = no +# +## +## Default width of locked screen (in %). Acceptable values are from 20 to 80. +## +# +#locked_screen_width_part = 50 +# +#ask_for_locked_screen_width_part = yes +# +#jump_to_now_playing_song_at_start = yes +# +#ask_before_clearing_playlists = yes +# +#clock_display_seconds = no +# +display_volume_level = no +# +#display_bitrate = no +# +#display_remaining_time = no +# +## Available values: none, basic, extended, perl. +## +#regular_expressions = perl +# +## +## Note: if below is enabled, ncmpcpp will ignore leading "The" word while +## sorting items in browser, tags in media library, etc. +## +ignore_leading_the = yes +# +## +## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and +## filtering lists. This takes an effect only if boost was compiled with ICU +## support. +## +#ignore_diacritics = no +# +#block_search_constraints_change_if_items_found = yes +# +mouse_support = no +# +#mouse_list_scroll_whole_page = yes +# +#empty_tag_marker = <empty> +# +#tags_separator = " | " +# +#tag_editor_extended_numeration = no +# +#media_library_sort_by_mtime = no +# +#enable_window_title = yes +# +## +## Note: You can choose default search mode for search engine. Available modes +## are: +## +## - 1 - use mpd built-in searching (no regexes, pattern matching) +## +## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but +## if your mpd is on a remote machine, downloading big database to process +## it can take a while +## +## - 3 - match only exact values (this mode uses mpd function for searching in +## database and local one for searching in current playlist) +## +# +#search_engine_default_search_mode = 1 +# +external_editor = vi +# +## Note: set to yes if external editor is a console application. +## +use_console_editor = yes +# +##### colors definitions ##### +## +## It is possible to set a background color by setting a color value +## "<foreground>_<background>", e.g. red_black will set foregound color to red +## and background color to black. +## +## In addition, for terminals that support 256 colors it is possible to set one +## of them by using a number in range [1, 256] instead of color name, +## e.g. numerical value corresponding to red_black is 2_1. To find out if the +## terminal supports 256 colors, run ncmpcpp and check out the bottom of the +## help screen for list of available colors and their numerical values. +## +## What is more, there are two special values for the background color: +## "transparent" and "current". The first one explicitly sets the background to +## be transparent, while the second one allows you to preserve current +## background color and change only the foreground one. It's used implicitly +## when background color is not specified. +## +## Moreover, it is possible to attach format information to selected color +## variables by appending to their end a colon followed by one or more format +## flags, e.g. black:b or red:ur. The following variables support this syntax: +## visualizer_color, color1, color2, empty_tag_color, volume_color, +## state_line_color, state_flags_color, progressbar_color, +## progressbar_elapsed_color, player_state_color, statusbar_time_color, +## alternative_ui_separator_color. +## +## Note: due to technical limitations of older ncurses version, if 256 colors +## are used there is a possibility that you'll be able to use only colors with +## transparent background. +# +#colors_enabled = yes +# +empty_tag_color = magenta +# +#header_window_color = magenta +# +#volume_color = default +# +#state_line_color = default +# +#state_flags_color = default:b +# +main_window_color = white +# +#color1 = white +# +#color2 = green +# +progressbar_color = black:b +# +progressbar_elapsed_color = blue:b +# +statusbar_color = red +# +statusbar_time_color = cyan:b +# +#player_state_color = default:b +# +#alternative_ui_separator_color = black:b +# +#window_border_color = green +# +#active_window_border = red +# |