/*
* $LynxId: userdefs.h,v 1.296 2014/03/12 19:14:45 tom Exp $
*
* Lynx - Hypertext navigation system
*
* (c) Copyright 1992, 1993, 1994 University of Kansas
* 1995, 1996: GNU General Public License
*
* Copyright 1996-2013,2014 Thomas E. Dickey and Lynx Developers Group
* Note: GNU General Public License is not a copyright.
*/
/*******************************************************************
* There are four sections to this document:
* Section 1. Things you MUST verify. Unix platforms use a configure
* script to provide sensible default values. If your site
* has special requirements, that may not be sufficient.
* For non-Unix platforms (e.g., VMS), there is no
* configure script, so the defaults here are more
* critical.
* Section 1a) VMS specific things
* Section 1b) non-VMS specific things
* Section 1c) ALL Platforms
*
* Section 2. Things you should probably check!
*
* Section 3. Things you should only change after you have a good
* understanding of the program!
*
* Section 4. Things you MUST check only if you plan to use Lynx in
* an anonymous account (allow public access to Lynx)!
*
*/
#ifndef USERDEFS_H
#define USERDEFS_H
/*******************************************************************
* Insure definition of NOT_ASCII, etc. precedes use below.
*/
#ifndef HTUTILS_H
#include <HTUtils.h>
#endif
#ifdef HAVE_CONFIG_H
#include <lynx_cfg.h>
#endif
/*******************************************************************
* Things you must change
* Section 1.
*/
/*******************************************************************
* Things you must change - VMS specific
* Section 1a).
*/
#ifdef VMS
/**************************
* TEMP_SPACE is where Lynx temporary cache files will be placed.
* Temporary files are removed automatically as long as nothing
* goes terribly wrong :) If you include "$USER" in the definition
* (e.g., "device:[dir.$USER]"), Lynx will replace the "$USER" with
* the username of the account which invoked the Lynx image. Such
* directories should already exist, and have protections/ACLs set
* so that only the appropriate user(s) will have read/write access.
* On VMS, "sys$scratch:" defaults to "sys$login:" if it has not been
* defined externally, or you can use "sys$login:" explicitly here.
* If the path has SHELL syntax and includes a tilde (e.g, "~/lynxtmp"),
* Lynx will replace the tilde with the full path for the user's home
* and convert the result to VMS syntax.
* The definition here can be overridden at run time by defining a
* "LYNX_TEMP_SPACE" VMS logical.
*/
#define TEMP_SPACE "sys$scratch:"
/**************************
* LYNX_CFG_FILE is the location and name of the default lynx
* global configuration file. It is sought and processed at
* startup of Lynx, followed by a seek and processing of a
* personal RC file (.lynxrc in the user's HOME directory,
* created if the user saves values in the 'o'ptions menu).
* You also can define the location and name of the global
* configuration file via a VMS logical, "LYNX_CFG", which
* will override the "LYNX_CFG_FILE" definition here. SYS$LOGIN:
* can be used as the device in either or both definitions if
* you want lynx.cfg treated as a personal configuration file.
* You also can use Unix syntax with a '~' for a subdirectory
* of the login directory, (e.g., ~/lynx/lynx.cfg).
* The -cfg command line switch will override these definitions.
* You can pass the compilation default via build.com or descrip.mms.
*
* Note that some implementations of telnet allow passing of
* environment variables, which might be used by unscrupulous
* people to modify the environment in anonymous accounts. When
* making Lynx and Web access publicly available via anonymous
* accounts intended to run Lynx captively, be sure the wrapper
* uses the -cfg switch and specifies the startfile, rather than
* relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables.
*
* Note that any SUFFIX or VIEWER mappings in the configuration
* file will be overridden by any suffix or viewer mappings
* that are established as defaults in src/HTInit.c. You can
* override the src/HTInit.c defaults via the mime.types and
* mailcap files (see the examples in the samples directory).
*/
#ifndef LYNX_CFG_FILE
#define LYNX_CFG_FILE "Lynx_Dir:lynx.cfg"
#endif /* LYNX_CFG_FILE */
#ifndef LYNX_CFG_PATH
#define LYNX_CFG_PATH "Lynx_Dir"
#endif /* LYNX_CFG_PATH */
/**************************
* The EXTENSION_MAP file allows you to map file suffixes to
* mime types.
* The file locations defined here can be overridden in lynx.cfg.
* Mappings in these global and personal files override any SUFFIX
* definitions in lynx.cfg and built-in defaults from src/HTInit.c.
*/
#define GLOBAL_EXTENSION_MAP "Lynx_Dir:mime.types"
#define PERSONAL_EXTENSION_MAP "mime.types"
/**************************
* The MAILCAP file allows you to map file MIME types to
* external viewers.
* The file locations defined here can be overridden in lynx.cfg.
* Mappings in these global and personal files override any VIEWER
* definitions in lynx.cfg and built-in defaults from src/HTInit.c.
*/
#define GLOBAL_MAILCAP "Lynx_Dir:mailcap"
#define PERSONAL_MAILCAP ".mailcap"
/**************************
* XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c
* for viewing image content types when the DECW$DISPLAY logical
* is set. Make it the foreign command for your system's X image
* viewer (commonly, "xv"). It can be anything that will handle GIF,
* TIFF and other popular image formats. Freeware ports of xv for
* VMS are available in the ftp://ftp.wku.edu/vms/unsupported and
* http://www.openvms.digital.com/cd/XV310A/ subdirectories. You
* must also have a "%s" for the filename. The default defined
* here can be overridden in lynx.cfg, or via the global or personal
* mailcap files.
* Make this NULL if you don't have such a viewer or don't want to
* use any default viewers for image types.
*/
#define XLOADIMAGE_COMMAND "xv %s"
/**************************
* SYSTEM_MAIL must be defined here to your mail sending command,
* and SYSTEM_MAIL_FLAGS to appropriate qualifiers. They can be
* changed in lynx.cfg.
*
* The mail command will be spawned as a subprocess of lynx
* and used to send the email, with headers specified in a
* temporary file for PMDF. If you define SYSTEM_MAIL to the
* "generic" MAIL utility for VMS, headers cannot be specified
* via a header file (and thus may not be included), and the
* subject line will be specified by use of the /subject="SUBJECT"
* qualifier.
*
* If your mailer uses another syntax, some hacking of the
* mailform(), mailmsg() and reply_by_mail() functions in
* LYMail.c, and printfile() function in LYPrint.c, may be
* required.
*/
#define SYSTEM_MAIL "PMDF SEND"
#define SYSTEM_MAIL_FLAGS "/headers"
/* #define SYSTEM_MAIL "MAIL" */
/* #define SYSTEM_MAIL_FLAGS "" */
/*************************
* Below is the argument for an sprintf command that will add
* "IN%""ADDRESS""" to the Internet mail address given by the user.
* It is structured for PMDF's IN%"INTERNET_ADDRESS" scheme. The %s
* is replaced with the address given by the user. If you are using
* a different Internet mail transport, change the IN appropriately
* (e.g., to SMTP, MX, or WINS), here or in lynx.cfg.
*/
#define MAIL_ADRS "\"IN%%\"\"%s\"\"\""
/*********************************
* On VMS, CSwing (an XTree emulation for VTxxx terminals) is intended for
* use as the Directory/File Manager (sources, objects, or executables are
* available from ftp://narnia.memst.edu/). CSWING_PATH should be defined
* here or in lynx.cfg to your foreign command for CSwing, with any
* regulatory switches you want included. If not defined, or defined as
* a zero-length string ("") or "none" (case-insensitive), the support
* will be disabled. It will also be disabled if the -nobrowse or
* -selective switches are used, or if the file_url restriction is set.
*
* When enabled, the DIRED_MENU command (normally 'f' or 'F') will invoke
* CSwing, normally with the current default directory as an argument to
* position the user on that node of the directory tree. However, if the
* current document is a local directory listing, or a local file and not
* one of the temporary menu or list files, the associated directory will
* be passed as an argument, to position the user on that node of the tree.
*/
/* #define CSWING_PATH "swing" */
/*********************************
* If USE_FIXED_RECORDS is set to TRUE here and/or in lynx.cfg, Lynx will
* convert 'd'ownloaded binary files to FIXED 512 record format before saving
* them to disk or acting on a DOWNLOADER option. If set to FALSE, the
* headers of such files will indicate that they are Stream_LF with Implied
* Carriage Control, which is incorrect, and can cause downloading software
* to get confused and unhappy. If you do set it FALSE, you can use the
* FIXED512.COM command file, which is included in this distribution, to do
* the conversion externally.
*/
#define USE_FIXED_RECORDS TRUE /* convert binaries to FIXED 512 */
/********************************
* If NO_ANONYMOUS_EMAIL is defined, Lynx will not offer to insert X-From
* and X_Personal_Name lines in the body of email messages. On VMS, the
* actual From and Personal Name (if defined for the account) headers always
* are those of the account running the Lynx image. If the account is not
* the one to which the recipient should reply, you can indicate the alternate
* address and personal name via the X-From and X_Personal_Name entries, but
* the recipient must explicitly send the reply to the X_From address, rather
* than using the VMS REPLY command (which will use the actual From address).
*
* This symbol constant might be defined on Unix for security reasons that
* don't apply on VMS. There is no security reason for defining this on VMS,
* but if you have no anonymous accounts (i.e., the From always will point to
* the actual user's email address, you can define it to avoid the bother of
* X-From and X_Personal_Name offers.
*/
/*#define NO_ANONYMOUS_EMAIL TRUE */
/**************************
* LYNX_LSS_FILE is the location and name of the default lynx
* character style sheet file. It is sought and processed at
* startup of Lynx only if experimental character style code has
* been compiled in, otherwise it will be ignored. Note that use
* of the character style option is _experimental_ AND _unsupported_.
* There is no documentation other than a sample lynx.lss file in
* the samples subdirectory. This code probably won't even work on
* VMS. You can define the location and name of this file via an
* environment variable, "lynx_lss", which will override the definition
* here. You can use '~' to refer to the user's home directory. The
* -lss command line switch will override these definitions.
*/
#ifndef LYNX_LSS_FILE
#define LYNX_LSS_FILE "Lynx_Dir:lynx.lss"
#endif /* LYNX_LSS_FILE */
/*
* FTP_FORMAT uses the same codes as LIST_FORMAT, but applies to files shown
* in an ftp listing.
*/
#define FTP_FORMAT "%d %-16.16t %a %K"
/*******************************************************************
* Things you must change - non-VMS specific
* Section 1b).
*/
#else /* non-VMS: UNIX etc. */
/**************************
* NOTE: This variable is set by the configure script; editing changes will
* be ignored.
*
* LYNX_CFG_FILE is the location and name of the default lynx
* global configuration file. It is sought and processed at
* startup of Lynx, followed by a seek and processing of a
* personal RC file (.lynxrc in the user's HOME directory,
* created if the user saves values in the 'o'ptions menu).
* You also can define the location and name of the global
* configuration file via an environment variable, "LYNX_CFG",
* which will override the "LYNX_CFG_FILE" definition here.
* You can use '~' in either or both definitions if you want
* lynx.cfg treated as a personal configuration file. The
* -cfg command line switch will override these definitions.
* You can pass the compilation default via the Makefile.
*
* If you are building Lynx using the configure script, you should specify
* the default location of the configuration file via that script, since it
* also generates the makefile and install-cfg rules.
*
* Note that many implementations of telnetd allow passing of
* environment variables, which might be used by unscrupulous
* people to modify the environment in anonymous accounts. When
* making Lynx and Web access publicly available via anonymous
* accounts intended to run Lynx captively, be sure the wrapper
* uses the -cfg switch and specifies the startfile, rather than
* relying on the LYNX_CFG, LYNX_CFG_FILE, or WWW_HOME variables.
*
* Note that any SUFFIX or VIEWER mappings in the configuration
* file will be overridden by any suffix or viewer mappings
* that are established as defaults in src/HTInit.c. You can
* override the src/HTInit.c defaults via the mime.types and
* mailcap files (see the examples in the samples directory).
*/
#ifndef HAVE_CONFIG_H
#ifndef LYNX_CFG_FILE
#ifdef DOSPATH
#define LYNX_CFG_PATH "."
#define LYNX_CFG_FILE "./lynx.cfg"
#else
#define LYNX_CFG_PATH "/usr/local/lib"
#define LYNX_CFG_FILE "/usr/local/lib/lynx.cfg"
#endif /* DOSPATH */
#endif /* LYNX_CFG_FILE */
#endif /* HAVE_CONFIG_H */
#ifndef MIME_LIBDIR
#define MIME_LIBDIR "/etc/"
#endif
/**************************
* The EXTENSION_MAP file allows you to map file suffixes to
* mime types.
* The file locations defined here can be overridden in lynx.cfg.
* Mappings in these global and personal files override any SUFFIX
* definitions in lynx.cfg and built-in defaults from src/HTInit.c.
*/
#define GLOBAL_EXTENSION_MAP MIME_LIBDIR "mime.types"
#define PERSONAL_EXTENSION_MAP "~/.mime.types"
/**************************
* The MAILCAP file allows you to map file MIME types to
* external viewers.
* The file locations defined here can be overridden in lynx.cfg.
* Mappings in these global and personal files override any VIEWER
* definitions in lynx.cfg and built-in defaults from src/HTInit.c.
*/
#define GLOBAL_MAILCAP MIME_LIBDIR "mailcap"
#define PERSONAL_MAILCAP "~/.mailcap"
/**************************
* XLOADIMAGE_COMMAND will be used as a default in src/HTInit.c for
* viewing image content types when the DISPLAY environment variable
* is set. Make it the full path and name of the xli (also known as
* xloadimage or xview) command, or other image viewer. It can be
* anything that will handle GIF, TIFF and other popular image formats
* (xli does). The freeware distribution of xli is available in the
* ftp://ftp.x.org/contrib/ subdirectory. The shareware, xv, also is
* suitable. You must also have a "%s" for the filename; "&" for
* background is optional. The default defined here can be overridden
* in lynx.cfg, or via the global or personal mailcap files.
* Make this NULL if you don't have such a viewer or don't want to
* use any default viewers for image types. Note that open is used as
* the default for NeXT, instead of the XLOADIMAGE_COMMAND definition.
*/
#define XLOADIMAGE_COMMAND "xli %s &"
/**************************
* For UNIX systems, SYSTEM_MAIL and SYSTEM_MAIL_FLAGS are set by the
* configure-script.
*/
/**************************
* A place to put temporary files, it is almost always in "/tmp/"
* for UNIX systems. If you include "$USER" in the definition
* (e.g., "/tmp/$USER"), Lynx will replace the "$USER" with the
* username of the account which invoked the Lynx image. Such
* directories should already exist, and have protections/ACLs set
* so that only the appropriate user(s) will have read/write access.
* If the path includes a tilde (e.g, "~" or "~/lynxtmp"), Lynx will
* replace the tilde with the full path for the user's home.
* The definition here can be overridden at run time by setting a
* "LYNX_TEMP_SPACE" environment variable, or (if that is not set)
* the "TMPDIR" (unix), or "TEMP" or "TMP" (Windows,DOS,OS/2)
* variable.
*/
#define TEMP_SPACE "/tmp/"
/********************************
* Comment this line out to disable code that implements command logging
* and scripting.
*/
#define USE_CMD_LOGGING 1
/********************************
* Comment this line out to disable code that randomizes the names given to
* temporary files.
*/
#define USE_RAND_TEMPNAME 1
/********************************
* Comment this line out to let the user enter his/her email address
* when sending a message. There should be no need to do this unless
* your mailer agent does not put in the From: field for you. (If your
* mailer agent does not automatically put in the From: field, you should
* upgrade, because anonymous mail makes it far too easy for a user to
* spoof someone else's email address.)
*/
/*#define NO_ANONYMOUS_EMAIL TRUE */
/********************************
* LIST_FORMAT defines the display for local files when LONG_LIST
* is defined in the Makefile. The default set here can be changed
* in lynx.cfg.
*
* The percent items in the list are interpreted as follows:
*
* %p Unix-style permission bits
* %l link count
* %o owner of file
* %g group of file
* %d date of last modification
* %a anchor pointing to file or directory
* %A as above but don't show symbolic links
* %t type of file (description derived from MIME type)
* %T MIME type as known by Lynx (from mime.types or default)
* %k size of file in Kilobytes
* %K as above but omit size for directories
* %s size of file in bytes
*
* Anything between the percent and the letter is passed on to sprintf.
* A double percent yields a literal percent on output. Other characters
* are passed through literally.
*
* If you want only the filename: " %a"
*
* If you want a brief output: " %4K %-12.12d %a"
*
* For the Unix "ls -l" format: " %p %4l %-8.8o %-8.8g %7s %-12.12d %a"
*/
#ifdef DOSPATH
#define LIST_FORMAT " %4K %-12.12d %a"
#else
#define LIST_FORMAT " %p %4l %-8.8o %-8.8g %7s %-12.12d %a"
#endif
/*
* FTP_FORMAT uses the same codes as LIST_FORMAT, but applies to files shown
* in an ftp listing.
*/
#define FTP_FORMAT "%d %-16.16t %a %K"
/*
* If NO_FORCED_CORE_DUMP is set to TRUE, Lynx will not force
* core dumps via abort() calls on fatal errors or assert()
* calls to check potentially fatal errors. The default defined
* here can be changed in lynx.cfg, and the compilation or
* configuration default can be toggled via the -core command
* line switch.
*/
#define NO_FORCED_CORE_DUMP FALSE
/**************************
* LYNX_LSS_FILE is the location and name of the default lynx
* character style sheet file. It is sought and processed at
* startup of Lynx only if experimental character style code
* has been compiled in, otherwise it will be ignored. Note
* that use of the character style option is _experimental_ AND
* _unsupported_. There is no documentation other than a sample
* lynx.lss file in the samples subdirectory. You also can
* define the location and name of this file via environment
* variables "LYNX_LSS" or "lynx_lss" which will override the
* "LYNX_LSS_FILE" definition here. You can use '~' in either or
* both definitions to refer to the user's home directory. The
* -lss command line switch will override these definitions.
*/
#ifndef LYNX_LSS_FILE
#ifdef DOSPATH
#define LYNX_LSS_FILE "lynx.lss"
#else
#define LYNX_LSS_FILE "/usr/local/lib/lynx.lss"
#endif
#endif /* LYNX_LSS_FILE */
#endif /* VMS OR UNIX */
/*************************************************************
* Section 1c) Every platform must change or verify these
*
*/
/*****************************
* STARTFILE is the default starting URL if none is specified
* on the command line or via a WWW_HOME environment variable;
* Lynx will refuse to start without a starting URL of some kind.
* STARTFILE can be remote, e.g., http://www.w3.org/default.html ,
* or local, e.g., file://localhost/PATH_TO/FILENAME ,
* where PATH_TO is replaced with the complete path to FILENAME
* using Unix shell syntax and including the device on VMS.
*
* Normally we expect you will connect to a remote site, e.g., the Lynx starting
* site:
*/
#define STARTFILE "http://lynx.isc.org/"
/*
* As an alternative, you may want to use a local URL. A good choice for this
* is the user's home directory:
*#define STARTFILE "file://localhost/~/"
*
* Your choice of STARTFILE should reflect your site's needs, and be a URL that
* you can connect to reliably. Otherwise users will become confused and think
* that they cannot run Lynx.
*/
/*****************************
* HELPFILE must be defined as a URL and must have a
* complete path if local:
* file://localhost/PATH_TO/lynx_help/lynx_help_main.html
* Replace PATH_TO with the path to the lynx_help subdirectory
* for this distribution (use SHELL syntax including the device
* on VMS systems).
* The default HELPFILE is:
* http://lynx.isc.org/release/breakout/lynx_help/lynx_help_main.html
* This should be changed here or in lynx.cfg to the local path.
* The definition here can be overridden at run time by defining a
* "LYNX_HELPFILE" environment variable.
*/
#define HELPFILE "http://lynx.isc.org/release/breakout/lynx_help/lynx_help_main.html"
/* #define HELPFILE "file://localhost/PATH_TO/lynx_help/lynx_help_main.html" */
/*****************************
* DEFAULT_INDEX_FILE is the default file retrieved when the
* user presses the 'I' key when viewing any document.
* An index to your CWIS can be placed here or a document containing
* pointers to lots of interesting places on the web.
*/
#define DEFAULT_INDEX_FILE "http://scout.wisc.edu/"
/*****************************
* If USE_TRACE_LOG is set FALSE, then when TRACE mode is invoked the
* syserr messages will not be directed to a log file named Lynx.trace
* in the account's HOME directory. The default defined here can be
* toggled via the -tlog command line switch. Also, it is set FALSE
* automatically when Lynx is executed in an anonymous or validation
* account (if indicated via the -anonymous or -validate command line
* switches, or via the check for the ANONYMOUS_USER, defined below).
* When FALSE, the TRACE_LOG command (normally ';') cannot be used to
* examine the Lynx Trace Log during the current session. If left
* TRUE, but you wish to use command line piping of stderr to a file
* you specify, include the -tlog toggle on the command line. Note
* that once TRACE mode is turned on during a session and stderr is
* directed to the log, all stderr messages will continue going to
* the log, even if TRACE mode is turned off via the TOGGLE_TRACE
* (Control-T) command.
*/
#define USE_TRACE_LOG TRUE
/*******************************
* If GOTOBUFFER is set to TRUE here or in lynx.cfg the last entered
* goto URL, if any, will be offered as a default for reuse or editing
* when the 'g'oto command is entered. All previously used goto URLs
* can be accessed for reuse or editing via a circular buffer invoked
* with the Up-Arrow or Down-Arrow keys after entering the 'g'oto
* command, whether or not a default is offered.
*/
#define GOTOBUFFER FALSE
/*****************************
* If FTP_PASSIVE is set to TRUE here or in lynx.cfg, ftp transfers will
* be done in passive mode.
* Note: if passive transfers fail, lynx falls back to active mode, and
* vice versa if active transfers fail at first.
*/
#define FTP_PASSIVE TRUE
/*****************************
* JUMPFILE is the default local file checked for shortcut URLs when
* the user presses the 'J' (JUMP) key. The user will be prompted for
* a shortcut entry (analogously to 'g'oto), and can enter one
* or use '?' for a list of the shortcuts with associated links to
* their actual URLs. See the sample jumps files in the samples
* subdirectory. Make sure your jumps file includes a '?' shortcut
* for a file://localhost URL to itself:
*
* <dt>?<dd><a href="file://localhost/path/jumps.html">This Shortcut List</a>
*
* If not defined here or in lynx.cfg, the JUMP command will invoke
* the NO_JUMPFILE status line message (see LYMessages_en.h). The prompt
* associated with the default jumps file is defined as JUMP_PROMPT in
* LYMessages_en.h and can be modified in lynx.cfg. Additional, alternate
* jumps files can be defined and mapped to keystrokes, and alternate
* prompts can be set for them, in lynx.cfg, but at least one default
* jumps file and associated prompt should be established before adding
* others.
*
* On VMS, use Unix SHELL syntax (including a lead slash) to define it.
*
* Do not include "file://localhost" in the definition.
*/
/* #define JUMPFILE "/Lynx_Dir/jumps.html" */
/*******************************
* If JUMPBUFFER is set to TRUE here or in lynx.cfg the last entered
* jump shortcut, if any, will be offered as a default for reuse or
* editing when the JUMP command is entered. All previously used
* shortcuts can be accessed for reuse or editing via a circular buffer
* invoked with the Up-Arrow or Down-Arrow keys after entering the JUMP
* command, whether or not a default is offered. If you have multiple
* jumps files and corresponding key mappings, each will have its own
* circular buffer.
*/
#define JUMPBUFFER FALSE
/********************************
* If PERMIT_GOTO_FROM_JUMP is defined, then a : or / in a jump target
* will be treated as a full or partial URL (to be resolved versus the
* startfile), and will be handled analogously to a 'g'oto command.
* Such "random URLs" will be entered in the circular buffer for goto
* URLs, not the buffer for jump targets (shortcuts). If the target
* is the single character ':', it will be treated equivalently to an
* Up-Arrow or Down-Arrow following a 'g'oto command, for accessing the
* circular buffer of goto URLs.
*/
/* #define PERMIT_GOTO_FROM_JUMP */
/*****************************
* If LYNX_HOST_NAME is defined here and/or in lynx.cfg, it will be
* treated as an alias for the local host name in checks for URLs on
* the local host (e.g., when the -localhost switch is set), and this
* host name, "localhost", and HTHostName (the fully qualified domain
* name of the system on which Lynx is running) will all be passed as
* local. A different definition in lynx.cfg will override this one.
*/
/* #define LYNX_HOST_NAME "www.cc.ukans.edu" */
/*********************
* LOCAL_DOMAIN is used for a tail match with the ut_host element of
* the utmp or utmpx structure on systems with utmp capabilities, to
* determine if a user is local to your campus or organization when
* handling -restrictions=inside_foo or outside_foo settings for ftp,
* news, telnet/tn3270 and rlogin URLs. An "inside" user is assumed
* if your system does not have utmp capabilities. CHANGE THIS here
* or in lynx.cfg.
*/
#define LOCAL_DOMAIN "ukans.edu"
/********************************
* The DEFAULT_CACHE_SIZE specifies the number of WWW documents to be
* cached in memory at one time.
*
* This so-called cache size (actually, number) may be modified in lynx.cfg
* and or with the command line argument -cache=NUMBER The minimum allowed
* value is 2, for the current document and at least one to fetch, and there
* is no absolute maximum number of cached documents. On Unix, and VMS not
* compiled with VAXC, whenever the number is exceeded the least recently
* displayed document will be removed from memory.
*
* On VMS compiled with VAXC, the DEFAULT_VIRTUAL_MEMORY_SIZE specifies the
* amount (bytes) of virtual memory that can be allocated and not yet be freed
* before previous documents are removed from memory. If the values for both
* the DEFAULT_CACHE_SIZE and DEFAULT_VIRTUAL_MEMORY_SIZE are exceeded, then
* least recently displayed documents will be freed until one or the other
* value is no longer exceeded. The value can be modified in lynx.cfg.
*
* The Unix and VMS but not VAXC implementations use the C library malloc's
* and calloc's for memory allocation, and procedures for taking the actual
* amount of cache into account still need to be developed. They use only
* the DEFAULT_CACHE_SIZE value, and that specifies the absolute maximum
* number of documents to cache (rather than the maximum number only if
* DEFAULT_VIRTUAL_MEMORY_SIZE has been exceeded, as with VAXC/VAX).
*/
#define DEFAULT_CACHE_SIZE 10
#if defined(VMS) && defined(VAXC) && !defined(__DECC)
#define DEFAULT_VIRTUAL_MEMORY_SIZE 512000
#endif /* VMS && VAXC && !__DECC */
/********************************
* If ALWAYS_RESUBMIT_POSTS is set TRUE, Lynx always will resubmit forms
* with method POST, dumping any cache from a previous submission of the
* form, including when the document returned by that form is sought with
* the PREV_DOC command or via the history list. Lynx always resubmits
* forms with method POST when a submit button or a submitting text input
* is activated, but normally retrieves the previously returned document
* if it had links which you activated, and then go back with the PREV_DOC
* command or via the history list.
*
* The default defined here can be changed in lynx.cfg, and can be toggled
* via the -resubmit_posts command line switch.
*/
#define ALWAYS_RESUBMIT_POSTS FALSE
/********************************
* CHARACTER_SET defines the default character set, i.e., that assumed
* to be installed on the user's terminal. It determines which characters
* or strings will be used to represent 8-bit character entities within
* HTML. New character sets may be defined as explained in the README
* files of the src/chrtrans directory in the Lynx source code distribution.
* For Asian (CJK) character sets, it also determines how Kanji code will
* be handled. The default defined here can be changed in lynx.cfg, and
* via the 'o'ptions menu. The 'o'ptions menu setting will be stored in
* the user's RC file whenever those settings are saved, and thereafter
* will be used as the default. Also see lynx.cfg for information about
* the -raw switch and LYK_RAW_TOGGLE command.
*
* Since Lynx now supports a wide range of platforms it may be useful
* to note that cpXXX codepages used by IBM PC compatible computers,
* and windows-xxxx used by native MS-Windows apps.
*
* Recognized character sets include:
*
* string for 'O'ptions Menu MIME name
* =========================== =========
* 7 bit approximations (US-ASCII) us-ascii
* Western (ISO-8859-1) iso-8859-1
* Western (cp850) cp850
* Western (windows-1252) windows-1252
* IBM PC US codepage (cp437) cp437
* DEC Multinational dec-mcs
* Macintosh (8 bit) macintosh
* NeXT character set next
* HP Roman8 hp-roman8
* Chinese euc-cn
* Japanese (EUC-JP) euc-jp
* Japanese (Shift_JIS) shift_jis
* Korean euc-kr
* Taipei (Big5) big5
* Vietnamese (VISCII) viscii
* Eastern European (ISO-8859-2) iso-8859-2
* Eastern European (cp852) cp852
* Eastern European (windows-1250) windows-1250
* Latin 3 (ISO-8859-3) iso-8859-3
* Latin 4 (ISO-8859-4) iso-8859-4
* Baltic Rim (cp775) cp775
* Baltic Rim (windows-1257) windows-1257
* Cyrillic (ISO-8859-5) iso-8859-5
* Cyrillic (cp866) cp866
* Cyrillic (windows-1251) windows-1251
* Cyrillic (KOI8-R) koi8-r
* Arabic (ISO-8859-6) iso-8859-6
* Arabic (cp864) cp864
* Arabic (windows-1256) windows-1256
* Greek (ISO-8859-7) iso-8859-7
* Greek (cp737) cp737
* Greek2 (cp869) cp869
* Greek (windows-1253) windows-1253
* Hebrew (ISO-8859-8) iso-8859-8
* Hebrew (cp862) cp862
* Hebrew (windows-1255) windows-1255
* Turkish (ISO-8859-9) iso-8859-9
* ISO-8859-10 iso-8859-10
* Ukrainian Cyrillic (cp866u) cp866u
* Ukrainian Cyrillic (KOI8-U) koi8-u
* UNICODE (UTF-8) utf-8
* RFC 1345 w/o Intro mnemonic+ascii+0
* RFC 1345 Mnemonic mnemonic
* Transparent x-transparent
*/
#define CHARACTER_SET "iso-8859-1"
/*****************************
* PREFERRED_LANGUAGE is the language in MIME notation (e.g., "en",
* "fr") which will be indicated by Lynx in its Accept-Language headers
* as the preferred language. If available, the document will be
* transmitted in that language. This definition can be overridden via
* lynx.cfg. Users also can change it via the 'o'ptions menu and save
* that preference in their RC file. This may be a comma-separated list
* of languages in decreasing preference.
*/
#define PREFERRED_LANGUAGE "en"
/*****************************
* PREFERRED_CHARSET specifies the character set in MIME notation (e.g.,
* "ISO-8859-2", "ISO-8859-5") which Lynx will indicate you prefer in
* requests to http servers using an Accept-Charsets header.
* This definition can be overridden via lynx.cfg. Users also can change it
* via the 'o'ptions menu and save that preference in their RC file.
* The value should NOT include "ISO-8859-1" or "US-ASCII", since those
* values are always assumed by default.
* If a file in that character set is available, the server will send it.
* If no Accept-Charset header is present, the default is that any
* character set is acceptable. If an Accept-Charset header is present,
* and if the server cannot send a response which is acceptable
* according to the Accept-Charset header, then the server SHOULD send
* an error response with the 406 (not acceptable) status code, though
* the sending of an unacceptable response is also allowed. (RFC2068)
*/
#define PREFERRED_CHARSET ""
/*****************************
* If MULTI_BOOKMARK_SUPPORT is set to MBM_STANDARD or MBM_ADVANCED, and
* BLOCK_MULTI_BOOKMARKS (see below) is FALSE, and sub-bookmarks exist, all
* bookmark operations will first prompt the user to select an active
* sub-bookmark file or the default bookmark file. MBM_OFF is the default so
* that one (the default) bookmark file will be available initially. The
* default set here can be overridden in lynx.cfg. The user can turn on
* multiple bookmark support via the 'o'ptions menu, and can save that choice as
* the startup default via the .lynxrc file. When on, the setting can be
* STANDARD or ADVANCED. If support is set to the latter, and the user mode
* also is ADVANCED, the VIEW_BOOKMARK command will invoke a status line prompt
* at which the user can enter the letter token (A - Z) of the desired bookmark,
* or '=' to get a menu of available bookmark files. The menu always is
* presented in NOVICE or INTERMEDIATE mode, or if the support is set to
* STANDARD. No prompting or menu display occurs if only one (the startup
* default) bookmark file has been defined (define additional ones via the
* 'o'ptions menu). The startup default, however set, can be overridden on the
* command line via the -restrictions=multibook or the -anonymous or -validate
* switches.
*/
#ifndef MULTI_BOOKMARK_SUPPORT
#define MULTI_BOOKMARK_SUPPORT MBM_OFF
#endif /* MULTI_BOOKMARK_SUPPORT */
/*****************************
* If BLOCK_MULTI_BOOKMARKS is set TRUE, multiple bookmark support will
* be forced off, and cannot be toggled on via the 'o'ptions menu. This
* compilation setting can be overridden via lynx.cfg.
*/
#ifndef BLOCK_MULTI_BOOKMARKS
#define BLOCK_MULTI_BOOKMARKS FALSE
#endif /* BLOCK_MULTI_BOOKMARKS */
/********************************
* URL_DOMAIN_PREFIXES and URL_DOMAIN_SUFFIXES are strings which will be
* prepended (together with a scheme://) and appended to the first element
* of command line or 'g'oto arguments which are not complete URLs and
* cannot be opened as a local file (file://localhost/string). Both
* can be comma-separated lists. Each prefix must end with a dot, each
* suffix must begin with a dot, and either may contain other dots (e.g.,
* .co.jp). The default lists are defined here, and can be changed
* in lynx.cfg. Each prefix will be used with each suffix, in order,
* until a valid Internet host is created, based on a successful DNS
* lookup (e.g., foo will be tested as www.foo.com and then www.foo.edu
* etc.). The first element can include a :port and/or /path which will
* be restored with the expanded host (e.g., wfbr:8002/dir/lynx will
* become http://www.wfbr.edu:8002/dir/lynx). The prefixes will not be
* used if the first element ends in a dot (or has a dot before the
* :port or /path), and similarly the suffixes will not be used if the
* the first element begins with a dot (e.g., .nyu.edu will become
* http://www.nyu.edu without testing www.nyu.com). Lynx will try to
* guess the scheme based on the first field of the expanded host name,
* and use "http://" as the default (e.g., gopher.wfbr.edu or gopher.wfbr.
* will be made gopher://gopher.wfbr.edu).
*/
#define URL_DOMAIN_PREFIXES "www."
#define URL_DOMAIN_SUFFIXES ".com,.edu,.net,.org"
/********************************
* If LIST_NEWS_NUMBERS is set TRUE, Lynx will use an ordered list
* and include the numbers of articles in news listings, instead of
* using an unordered list.
*
* The default defined here can be changed in lynx.cfg.
*/
#define LIST_NEWS_NUMBERS FALSE
/********************************
* If LIST_NEWS_DATES is set TRUE, Lynx will include the dates of
* articles in news listings. The dates always are included in the
* articles, themselves.
*
* The default defined here can be changed in lynx.cfg.
*/
#define LIST_NEWS_DATES FALSE
/*************************
* Set NEWS_POSTING to FALSE if you do not want to support posting to
* news groups via Lynx. If left TRUE, Lynx will use its news gateway to
* post new messages or followups to news groups, using the URL schemes
* described in the "Supported URL" section of the online 'h'elp. The
* posts will be attempted via the nntp server specified in the URL, or
* if none was specified, via the NNTPSERVER configuration or environment
* variable. Links with these URLs for posting or sending followups are
* created by the news gateway when reading group listings or articles
* from nntp servers if the server indicates that it permits posting.
* The setting here can be changed in lynx.cfg.
*/
#define NEWS_POSTING TRUE
/*************************
* Define LYNX_SIG_FILE to the name of a file containing a signature which
* can be appended to email messages and news postings or followups. The
* user will be prompted whether to append it. It is sought in the home
* directory. If it is in a subdirectory, begin it with a dot-slash
* (e.g., ./lynx/.lynxsig). The definition here can be changed in lynx.cfg.
*/
#define LYNX_SIG_FILE ".lynxsig"
/********************************
* BIBP_GLOBAL_SERVER is the default global server for bibp: links, used
* when a local bibhost or document-specified citehost is unavailable.
*/
#define BIBP_GLOBAL_SERVER "http://usin.org/"
/********************************
* If USE_SELECT_POPUPS is set FALSE, Lynx will present a vertical list
* of radio buttons for the OPTIONs in SELECT blocks which lack the
* MULTIPLE attribute, instead of using a popup menu. Note that if
* the MULTIPLE attribute is present in the SELECT start tag, Lynx
* always will create a vertical list of checkboxes for the OPTIONs.
*
* The default defined here can be changed in lynx.cfg. It can be
* set and saved via the 'o'ptions menu to override the compilation
* and configuration defaults, and the default always can be toggled
* via the -popup command line switch.
*/
#define USE_SELECT_POPUPS TRUE
/********************************
* If COLLAPSE_BR_TAGS is set FALSE, Lynx will not collapse serial
* BR tags. If set TRUE, two or more concurrent BRs will be collapsed
* into a single blank line. Note that the valid way to insert extra
* blank lines in HTML is via a PRE block with only newlines in the
* block.
*
* The default defined here can be changed in lynx.cfg.
*/
#define COLLAPSE_BR_TAGS TRUE
/********************************
* If SET_COOKIES is set FALSE, Lynx will ignore Set-Cookie headers
* in http server replies.
*
* The default defined here can be changed in lynx.cfg, and can be toggled
* via the -cookies command line switch.
*/
#define SET_COOKIES TRUE
/********************************
* If SEND_USERAGENT is set FALSE, Lynx will not send a user-agent string.
* You can override this in the 'O'ptions menu.
*/
#define SEND_USERAGENT TRUE
/*******************************
* If ACCEPT_ALL_COOKIES is set TRUE, and SET_COOKIES is TRUE, Lynx will
* accept all cookies.
*
* The default defined here can be changed in lynx.cfg, and .lynxrc, or
* toggled via the -accept_all_cookies command line switch.
*/
#define ACCEPT_ALL_COOKIES FALSE
/****************************************************************
* Section 2. Things that you probably want to change or review
*
*/
/*****************************
* The following three definitions set the number of seconds for
* pauses following status line messages that would otherwise be
* replaced immediately, and are more important than the unpaused
* progress messages. Those set by INFOSECS are also basically
* progress messages (e.g., that a prompted input has been canceled)
* and should have the shortest pause. Those set by MESSAGESECS are
* informational (e.g., that a function is disabled) and should have
* a pause of intermediate duration. Those set by ALERTSECS typically
* report a serious problem and should be paused long enough to read
* whenever they appear (typically unexpectedly). The default values
* defined here can be modified via lynx.cfg, should longer pauses be
* desired for braille-based access to Lynx.
*/
#define INFOSECS 1
#define MESSAGESECS 2
#define ALERTSECS 3
#define DEBUGSECS 0
#define REPLAYSECS 0
/******************************
* SHOW_COLOR controls whether the program displays in color by default.
*/
#ifdef COLOR_CURSES
#define SHOW_COLOR TRUE
#else
#define SHOW_COLOR FALSE
#endif
/******************************
* SHOW_CURSOR controls whether or not the cursor is hidden or appears
* over the current link, or current option in select popup windows.
* Showing the cursor is handy if you are a sighted user with a poor
* terminal that can't do bold and reverse video at the same time or
* at all. It also can be useful to blind users, as an alternative
* or supplement to setting LINKS_AND_FIELDS_ARE_NUMBERED or
* LINKS_ARE_NUMBERED.
*
* The default defined here can be changed in lynx.cfg. It can be
* set and saved via the 'o'ptions menu to override the compilation
* and configuration defaults, and the default always can be toggled
* via the -show_cursor command line switch.
*/
#define SHOW_CURSOR FALSE
/******************************
* UNDERLINE_LINKS controls whether links are underlined by default, or shown
* in bold. Normally this default is set from the configure script.
*/
#ifndef HAVE_CONFIG_H
#define UNDERLINE_LINKS FALSE
#endif
/******************************
* VERBOSE_IMAGES controls whether or not Lynx replaces the [LINK], [INLINE]
* and [IMAGE] comments (for images without ALT) with filenames of these
* images. This is extremely useful because now we can determine immediately
* what images are just decorations (button.gif, line.gif) and what images are
* important.
*
* The default defined here can be changed in lynx.cfg.
*/
#define VERBOSE_IMAGES TRUE
/******************************
* BOXVERT and BOXHORI control the layout of popup menus. Set to 0 if your
* curses supports line-drawing characters, set to '*' or any other character
* to not use line-drawing (e.g., '|' for vertical and '-' for horizontal).
*/
#ifndef HAVE_CONFIG_H
#ifdef DOSPATH
#define BOXVERT 0
#define BOXHORI 0
#else
#define BOXVERT '|'
/* #define BOXVERT 0 */
#define BOXHORI '-'
/* #define BOXHORI 0 */
#endif /* DOSPATH */
#endif /* !HAVE_CONFIG_H */
/******************************
* LY_UMLAUT controls the 7-bit expansion of characters with dieresis or
* umlaut. If defined, a digraph is displayed, e.g., auml --> ae
* Otherwise, a single character is displayed, e.g., auml --> a
* Note that this is currently not supported with the chartrans code,
* or rather it doesn't have an effect if translations for a display
* character set are taken from one of the *.tbl files in src/chrtrans.
* One would have to modify the corresponding *.tbl file to change the
# 7-bit replacements for these characters.
*/
#define LY_UMLAUT
/*******************************
* Execution links/scripts configuration.
*
* Execution links and scripts allow you to run
* local programs by activating links within Lynx.
*
* An execution link is of the form:
*
* lynxexec:<COMMAND>
* or:
* lynxexec://<COMMAND>
* or:
* lynxprog:<COMMAND>
* or:
* lynxprog://<COMMAND>
*
* where <COMMAND> is a command that Lynx will run when the link is
* activated. The double-slash should be included if the command begins
* with an '@', as for executing VMS command files. Otherwise, the double-
* slash can be omitted.
* Use lynxexec for commands or scripts that generate a screen output which
* should be held via a prompt to press <return> before returning to Lynx
* for display of the current document.
* Use lynxprog for programs such as mail which do not require a pause before
* Lynx restores the display of the current document.
*
* Execution scripts take the form of a standard
* URL. Extension mapping or MIME typing is used
* to decide if the file is a script and should be
* executed. The current extensions are:
* .csh, .ksh, and .sh on UNIX systems and .com on
* VMS systems. Any time a file of this type is
* accessed Lynx will look at the user's options
* settings to decide if the script can be executed.
* Current options include: Only exec files that
* reside on the local machine and are referenced
* with a "file://localhost" URL, All execution
* off, and all execution on.
*
* The following definitions will add execution
* capabilities to Lynx. You may define none, one
* or both.
*
* I strongly recommend that you define neither one
* of these since execution links/scripts can represent
* very serious security risk to your system and its
* users. If you do define these I suggest that
* you only allow users to execute files/scripts
* that reside on your local machine.
*
* YOU HAVE BEEN WARNED!
*
* Note: if you are enabling execution scripts you should
* also see src/HTInit.c to verify/change the execution
* script extensions and/or commands.
*/
/* #define EXEC_LINKS */
/* #define EXEC_SCRIPTS */
#if defined(EXEC_LINKS) || defined(EXEC_SCRIPTS)
/**********
* if ENABLE_OPTS_CHANGE_EXEC is defined, the user will be able to change
* the execution status within the Options Menu.
*/
/* #define ENABLE_OPTS_CHANGE_EXEC */
/**********
* if NEVER_ALLOW_REMOTE_EXEC is defined,
* local execution of scripts or lynxexec & lynxprog URLs will be implemented
* only from HTML files that were accessed via a "file://localhost/" URL
* and the Options Menu for "Local executions links" will allow toggling
* only between "ALWAYS OFF" and "FOR LOCAL FILES ONLY".
*/
/* #define NEVER_ALLOW_REMOTE_EXEC */
/*****************************
* These are for executable shell scripts and links.
* Set to FALSE unless you really know what you're
* doing.
*
* This only applies if you are compiling with EXEC_LINKS or
* EXEC_SCRIPTS defined.
*
* The first two settings:
* LOCAL_EXECUTION_LINKS_ALWAYS_ON
* LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE
* specify the DEFAULT settings of the users execution link
* options (they can also be overridden in lynx.cfg), but
* the user may still change those options.
* If you do not wish the user to be able to change the
* execution link settings you may wish to use the command line option:
* -restrictions=exec_frozen
*
* LOCAL_EXECUTION_LINKS_ALWAYS_ON will be FALSE
* if NEVER_ALLOW_REMOTE_EXEC has been defined.
*
* if LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS is true,
* all execution links will be disabled when the -anonymous
* command-line option is used. Anonymous users are not allowed
* to change the execution options from within the Lynx Options Menu,
* so you might be able to use this option to enable execution links
* and set LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE to TRUE
* to give anonymous execution-link capability without compromising
* your system (see comments about TRUSTED_EXEC rules in lynx.cfg ).
*/
#define LOCAL_EXECUTION_LINKS_ALWAYS_ON FALSE
#define LOCAL_EXECUTION_LINKS_ON_BUT_NOT_REMOTE FALSE
#define LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS FALSE
#endif /* defined(EXEC_LINKS) || defined(EXEC_SCRIPTS) */
/**********
* *** This is for those -- e.g. DOS users -- who do not have configure;
* *** others should use the configure switch --enable-lynxcgi-links .
*
* UNIX:
* =====
* CGI script support. Defining LYNXCGI_LINKS allows you to use the
*
* lynxcgi:path
*
* URL which allows lynx to access a cgi script directly without the need for
* a http daemon. Redirection is not supported but just about everything
* else is. If the path is not an executable file then the URL is
* rewritten as file://localhost and passed to the file loader. This means
* that if your http:html files are currently set up to use relative
* addressing, you should be able to fire up your main page with lynxcgi:path
* and everything should work as if you were talking to the http daemon.
*
* Note that TRUSTED_LYNXCGI directives must be defined in your lynx.cfg file
* if you wish to place restrictions on source documents and/or paths for
* lynxcgi links.
*
* The cgi scripts are called with a fork()/execve() sequence so you don't
* have to worry about people trying to abuse the code. :-)
*
* George Lindholm (George.Lindholm@ubc.ca)
*
* VMS:
* ====
* The lynxcgi scheme, if enabled, yields an informational message regardless
* of the path, and use of the freeware OSU DECthreads server as a local
* script server is recommended instead of lynxcgi URLs. Uncomment the
* following line to define LYNXCGI_LINKS, and when running Lynx, enter
* lynxcgi:advice as a G)oto URL for more information and links to the
* OSU server distribution.
*/
#ifndef HAVE_CONFIG_H
/* #define LYNXCGI_LINKS */
#endif
/*********************************
* MAIL_SYSTEM_ERROR_LOGGING will send a message to the owner of
* the information if there is one, every time
* that a document cannot be accessed!
* This is just the default, it can be changed in lynx.cfg, and error
* logging can be turned off with the -nolog command line option.
*
* NOTE: This can generate A LOT of mail, be warned.
*/
#define MAIL_SYSTEM_ERROR_LOGGING FALSE /*mail a message for every error? */
/*********************************
* If a document cannot be accessed, and MAIL_SYSTEM_ERROR_LOGGING
* is on and would send a message to the owner of the information,
* but no owner is known, then the message will be sent to ALERTMAIL
* instead - if it is defined as a non-empty email address.
*
* NOTE: This can generate A REAL LOT of mail, be warned!!!
*/
/* #define ALERTMAIL "webmaster@localhost" */ /*error recipient if no owner */
/*********************************
* If CHECKMAIL is set to TRUE, the user will be informed (via a status line
* message) about the existence of any unread mail at startup of Lynx, and
* will get status line messages if subsequent new mail arrives. If a jumps
* file with a lynxprog URL for invoking mail is available, or your html
* pages include an mail launch file URL, the user thereby can access mail
* and read the messages.
* This is just the default, it can be changed in lynx.cfg. The checks and
* status line reports will not be performed if Lynx has been invoked with
* the -restrictions=mail switch.
*
* VMS USERS !!!
* New mail is normally broadcast as it arrives, via "unsolicited screen
* broadcasts", which can be "wiped" from the Lynx display via the Ctrl-W
* command. You may prefer to disable the broadcasts and use CHECKMAIL
* instead (e.g., in a public account which will be used by people who
* are ignorant about VMS).
*/
#define CHECKMAIL FALSE /* report unread and new mail messages */
/*********************************
* Vi or Emacs movement keys. These are defaults,
* which can be changed in lynx.cfg , the Options Menu or .lynxrc .
*/
#define VI_KEYS_ALWAYS_ON FALSE /* familiar h j k l */
#define EMACS_KEYS_ALWAYS_ON FALSE /* familiar ^N ^P ^F ^B */
/*********************************
* DEFAULT_KEYPAD_MODE may be set to NUMBERS_AS_ARROWS
* or LINKS_ARE_NUMBERED
* or LINKS_AND_FIELDS_ARE_NUMBERED
* to specify whether numbers (e.g. [10]) appear before all links,
* allowing immediate access by entering the number on the keyboard,
* or numbers on the numeric key-pad work like arrows;
* the 3rd option causes form fields also to be preceded by numbers.
* The first two options (but not the last) can be changed in lynx.cfg
* and all three can be changed via the Options Menu.
*/
#define DEFAULT_KEYPAD_MODE NUMBERS_AS_ARROWS
/********************************
* The default search.
* This is a default that can be overridden in lynx.cfg or by the user!
*/
#define CASE_SENSITIVE_ALWAYS_ON FALSE /* case sensitive user search */
/********************************
* If NO_DOT_FILES is set TRUE here or in lynx.cfg, the user will not be
* allowed to specify files beginning with a dot in reply to output filename
* prompts, and files beginning with a dot (e.g., file://localhost/foo/.lynxrc)
* will not be included in the directory browser's listings. The setting here
* will be overridden by the setting in lynx.cfg. If FALSE, you can force it
* to be treated as TRUE via -restrictions=dotfiles (or -anonymous, which sets
* this and most other restrictions).
*
* If it is FALSE at startup of Lynx, the user can regulate it via the
* 'o'ptions menu, and may save the preference in the RC file.
*/
#define NO_DOT_FILES TRUE /* disallow access to dot files */
/********************************
* If MAKE_LINKS_FOR_ALL_IMAGES is TRUE, all images will be given links
* which can be ACTIVATEd. For inlines, the ALT or pseudo-ALT ("[INLINE]")
* strings will be links for the resolved SRC rather than just text. For
* ISMAP or other graphic links, the ALT or pseudo-ALT ("[ISMAP]" or "[LINK]")
* strings will have '-' and a link labeled "[IMAGE]" for the resolved SRC
* appended. See also VERBOSE_IMAGES flag.
*
* The default defined here can be changed in lynx.cfg, and the user can
* use LYK_IMAGE_TOGGLE to toggle the feature on or off at run time.
*
* The default also can be toggled via an "-image_links" command line switch.
*/
#define MAKE_LINKS_FOR_ALL_IMAGES FALSE /* inlines cast to links */
/********************************
* If MAKE_PSEUDO_ALTS_FOR_INLINES is FALSE, inline images which do not
* specify an ALT string will not have "[INLINE]" inserted as a pseudo-ALT,
* i.e., they'll be treated as having ALT="". If MAKE_LINKS_FOR_ALL_IMAGES
* is defined or toggled to TRUE, however, the pseudo-ALTs will be created
* for inlines, so that they can be used as links to the SRCs.
* See also VERBOSE_IMAGES flag.
*
* The default defined here can be changed in lynx.cfg, and the user can
* use LYK_INLINE_TOGGLE to toggle the feature on or off at run time.
*
* The default also can be toggled via a "-pseudo_inlines" command line
* switch.
*/
#define MAKE_PSEUDO_ALTS_FOR_INLINES TRUE /* Use "[INLINE]" pseudo-ALTs */
/********************************
* If SUBSTITUTE_UNDERSCORES is TRUE, the _underline_ format will be used
* for emphasis tags in dumps.
*
* The default defined here can be changed in lynx.cfg, and the user can
* toggle the default via a "-underscore" command line switch.
*/
#define SUBSTITUTE_UNDERSCORES FALSE /* Use _underline_ format in dumps */
/********************************
* If QUIT_DEFAULT_YES is defined as TRUE then when the QUIT command
* is entered, any response other than n or N will confirm. Define it
* as FALSE if you prefer the more conservative action of requiring an
* explicit Y or y to confirm. The default defined here can be changed
* in lynx.cfg.
*/
#define QUIT_DEFAULT_YES TRUE
/********************************
* If TEXT_SUBMIT_CONFIRM_WANTED is defined (to anything), the user will be
* prompted for confirmation before Lynx submits a form with only one input
* field (of type text) to the server, after the user has pressed <return>
* or <enter> on the field. Since the is no other way such as a "submit"
* button to submit, normally the form gets submitted automatically in this
* case, but some users may find this surprising and expect <return> to just
* move to the next link as for other text entry fields.
*/
/* #define TEXT_SUBMIT_CONFIRM_WANTED */
/********************************
* If TEXTFIELDS_MAY_NEED_ACTIVATION is defined (to anything),
* the option TEXTFIELDS_NEED_ACTIVATION in lynx.cfg or the command
* line option -tna can be used to require explicit activation
* before text input fields can be changed with the built-in line
* editor.
*/
#define TEXTFIELDS_MAY_NEED_ACTIVATION
/********************************
* The following three definitions control some aspects of extended
* textarea handling. TEXTAREA_EXPAND_SIZE is the number of new empty
* lines that get appended at the end of a textarea by a GROWTEXTAREA
* key. If TEXTAREA_AUTOGROW is defined (to anything), <return> or
* <enter> in the last line of a textarea automatically extends the
* area by adding a new line. If TEXTAREA_AUTOEXTEDIT is defined (to
* anything), a key mapped to DWIMEDIT will invoke the external editor
* like EDITTEXTAREA when used in a text input field. Comment those
* last two definitions out to disable the corresponding behavior.
* See under KEYMAP in lynx.cfg for mapping keys to GROWTEXTAREA or
* DWIMEDIT actions.
*/
#define TEXTAREA_EXPAND_SIZE 5
#define TEXTAREA_AUTOGROW
#define TEXTAREA_AUTOEXTEDIT
/********************************
* If BUILTIN_SUFFIX_MAPS is defined (to anything), default mappings
* for file extensions (aka suffixes) will be compiled in (see
* src/HTInit.c). By removing the definition, the default mappings
* are suppressed except for a few very basic ones for text/html.
* See GLOBAL_EXTENSION_MAP, PERSONAL_EXTENSION_MAP above and SUFFIX,
* SUFFIX_ORDER in lynx.cfg for other ways to map file extensions.
*/
#define BUILTIN_SUFFIX_MAPS
/********************************
* These definitions specify files created or used in conjunction
* with traversals. See CRAWL.ANNOUNCE for more information.
*/
#define TRAVERSE_FILE "traverse.dat"
#define TRAVERSE_FOUND_FILE "traverse2.dat"
#define TRAVERSE_REJECT_FILE "reject.dat"
#define TRAVERSE_ERRORS "traverse.errors"
/****************************************************************
* The LYMessages_en.h header defines default, English strings
* used in status line prompts, messages, and warnings during
* program execution. See the comments in LYMessages_en.h for
* information on translating or customizing them for your site.
*/
#ifndef LYMESSAGES_EN_H
#include <LYMessages_en.h>
#endif /* !LYMESSAGES_EN_H */
/****************************************************************
* DEFAULT_VISITED_LINKS may be set to one or more of
* VISITED_LINKS_AS_FIRST_V
* VISITED_LINKS_AS_TREE
* VISITED_LINKS_AS_LATEST
* VISITED_LINKS_REVERSE
* to change the organization of the Visited Links page.
*
* (Not all combinations are meaningful; see src/LYrcFile.c for a list
* in the visited_links_tbl table).
*/
#define DEFAULT_VISITED_LINKS (VISITED_LINKS_AS_LATEST | VISITED_LINKS_REVERSE)
/****************************************************************
* If USE_CACHEJAR is set to TRUE the user will be able to view,
* access and delete cached documents in current lynx session.
*/
#ifndef USE_CACHEJAR
/* #define USE_CACHEJAR TRUE */
#endif
/****************************************************************
* If USE_SESSIONS is set to TRUE the user will be able to save,
* resume and in general manipulate with lynx sessions.
*/
#ifndef USE_SESSIONS
/* #define USE_SESSIONS TRUE */
#endif
#define MAX_SESSIONS 10000
/*
* If USE_SESSIONS is TRUE you may tune it fine how it will work:
*/
#define GOTOURL_IN_SESSION /* Allow to save goto url */
#define GOTOURL_OUT_SESSION /* Allow to restore goto url */
#define HISTORY_IN_SESSION /* Allow to save history */
#define HISTORY_OUT_SESSION /* Allow to restore history */
#define SEARCH_IN_SESSION /* Allow to save search string */
#define SEARCH_OUT_SESSION /* Allow to restore search string */
#define VLINK_IN_SESSION /* Allow to save visited link */
#define VLINK_OUT_SESSION /* Allow to restore visited link */
/****************************************************************
* The STATUSBUFSIZE defines how many entries will be stored in
* cyclic buffer of statusline messages. This is specially useful
* for users who use lynx on a terminal with more than 40 lines.
*/
/* #define STATUSBUFSIZE 90 */
/****************************************************************
* If USE_PROGRESSBAR is TRUE the user will be able to set
* download progress as odometer(thermometer) display, ie:
*
* 80% IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
*
*/
/* #define USE_PROGRESSBAR TRUE */
/****************************************************************
* Section 3. Things that you should not change until you
* have a good knowledge of the program
*/
#define LYNX_NAME "Lynx"
/* The strange-looking comments on the next line tell PRCS to replace
* the version definition with the Project Version on checkout. Just
* ignore it. - kw */
/* $Format: "#define LYNX_VERSION \"$ProjectVersion$\""$ */
#define LYNX_VERSION "2.8.9dev.1"
#define LYNX_WWW_HOME "http://lynx.isc.org/"
#define LYNX_WWW_DIST "http://lynx.isc.org/current/"
/* $Format: "#define LYNX_DATE \"$ProjectDate$\""$ */
#define LYNX_DATE "Wed, 12 Mar 2014 12:14:45 -0700"
#define LYNX_DATE_OFF 5 /* truncate the automatically-generated date */
#define LYNX_DATE_LEN 11 /* truncate the automatically-generated date */
#ifdef UNICODE
#define W32_STRING(s) L##s
#else
#define W32_STRING(s) s
#endif
#define LYNX_SUBKEY W32_STRING("Software\\Lynx")
#define LINESIZE 1024 /* max length of line to read from file */
#define MAXLINKS 1024 /* max links on one screen */
#ifndef SEARCH_GOAL_LINE
#define SEARCH_GOAL_LINE 4 /* try to position search target there */
#endif
#define MAXCHARSETS 60 /* max character sets supported */
#define TRST_MAXROWSPAN 200 /* max rowspan accepted by TRST code */
#define TRST_MAXCOLSPAN 200 /* max colspan and COL/COLGROUP span accepted */
#define MAX_TABLE_ROWS 200 /* max rows for tables */
#define MAX_TABLE_COLS 200 /* max cols for tables */
#define SAVE_TIME_NOT_SPACE /* minimize number of some malloc calls */
/* Win32 may support more, but old win16 helper apps may not. */
#if defined(__DJGPP__) || defined(_WINDOWS)
#define FNAMES_8_3
#endif
#ifdef FNAMES_8_3
#define HTML_SUFFIX ".htm"
#else
#define HTML_SUFFIX ".html"
#endif
#ifndef FNAME_LYNXRC
#ifdef FNAMES_8_3
#define FNAME_LYNXRC "lynx.rc"
#else
#define FNAME_LYNXRC ".lynxrc"
#endif /* FNAMES_8_3 */
#endif
#ifndef FNAME_LYNX_COOKIES
#ifdef FNAMES_8_3
#define FNAME_LYNX_COOKIES "cookies"
#else
#define FNAME_LYNX_COOKIES ".lynx_cookies"
#endif /* FNAMES_8_3 */
#endif
#ifndef FNAME_LYNX_TRACE
#ifdef FNAMES_8_3
#define FNAME_LYNX_TRACE "LY-TRACE.LOG"
#else
#define FNAME_LYNX_TRACE "Lynx.trace"
#endif /* FNAMES_8_3 */
#endif
#ifndef BLAT_MAIL
#define BLAT_MAIL "blat"
#endif
#ifndef ALTBLAT_MAIL
#define ALTBLAT_MAIL "blatj"
#endif
#define BIN_SUFFIX ".bin"
#define TEXT_SUFFIX ".txt"
#ifdef VMS
/*
** Use the VMS port of gzip for uncompressing both .Z and .gz files.
*/
#define UNCOMPRESS_PATH "gzip -d"
#define COPY_PATH "copy/nolog/noconf"
#define GZIP_PATH "gzip"
#define BZIP2_PATH "bzip2"
#define TELNET_PATH "telnet"
#define TN3270_PATH "tn3270"
#define RLOGIN_PATH "rlogin"
#else
#ifdef DOSPATH
/*
* Define this to setup feature that uses directory of lynx.exe to locate
* associated configuration files.
#define USE_PROGRAM_DIR 1
*/
#ifdef _WINDOWS
#ifndef USE_BLAT_MAILER
#define USE_BLAT_MAILER 1
#endif
#else
/* have to define something... */
#undef SYSTEM_MAIL
#define SYSTEM_MAIL "sendmail"
#define SYSTEM_MAIL_FLAGS "-t -oi"
#endif /* _WINDOWS */
/*
** The following executables may be used at run time. Unless you change
** the definitions to include the full directories, they will be sought
** from your PATH at run-time; they should be available as "cp.exe",
** "mv.exe" and so on. To get those programs look for GNU-port stuff
** elsewhere.
** Currently, if compiled with -DUSE_ZLIB and without -DDIRED_SUPPORT
** (default), the following from the list below are required:
** MV_PATH (mv.exe) - for bookmark handling (DEL_BOOKMARK command)
** UNCOMPRESS_PATH - for automatic decompression of files in Unix
** compress format
** TELNET_PATH, TN3270_PATH, RLOGIN_PATH - for access to "telnet:",
** "tn3270:", and "rlogin:" URLs.
** If they are not defined right, the corresponding operations may fail
** in unexpected and obscure ways!
**
** WINDOWS/DOS
** ===========
*/
#ifndef HAVE_CONFIG_H
#define COMPRESS_PATH "compress"
#define UNCOMPRESS_PATH "uncompress"
#define UUDECODE_PATH "uudecode"
#define ZCAT_PATH "zcat"
#define GZIP_PATH "gzip"
#define BZIP2_PATH "bzip2"
#define MV_PATH "mv"
#define INSTALL_PATH "install"
#define TAR_PATH "tar"
#define ZIP_PATH "zip"
#define UNZIP_PATH "unzip"
#define RM_PATH "rm"
#define TELNET_PATH "telnet"
#define TN3270_PATH "tn3270"
#define RLOGIN_PATH "rlogin"
/* see src/LYLocal.c for these */
#define TAR_UP_OPTIONS "-cf"
#define TAR_DOWN_OPTIONS "-xf"
#define TAR_PIPE_OPTIONS "-"
#define TAR_FILE_OPTIONS ""
/*
* These are not used:
* #define COPY_PATH "cp"
* #define CHMOD_PATH "chmod"
* #define MKDIR_PATH "mkdir"
* #define TOUCH_PATH "touch"
*/
#endif /* HAVE_CONFIG_H */
#else /* Unix */
/* Standard locations are defined via the configure script. When
* helper applications are in your home directory or other nonstandard
* locations, you probably will have to preset the path to them with
* environment variables (see INSTALLATION, Section II-1d).
*/
#endif /* DOSPATH */
#endif /* VMS */
/*****************************
* I have not ported multibyte support for EBCDIC. In fact, some multibyte
* code in LYLowerCase() crashes on EBCDIC strings. -- gil
*/
#if ! defined(NOT_ASCII)
/*****************************
* SUPPORT_MULTIBYTE_EDIT provides better support of CJK characters to
* Lynx's Line Editor. JIS X0201 Kana is partially supported. The
* reason why I didn't support it fully is I think supporting it is not
* required so much and I don't have an environment to test it. - TH
*/
#define SUPPORT_MULTIBYTE_EDIT
#endif /* ! defined(NOT_ASCII) */
/*****************************
* SUPPORT_CHDIR provides CD command (bound to 'C' by default). It allows
* changing directory to arbitrary location (if OS allows them). If dired is
* enabled, user will be able to visit any directory and view any file allowed
* according to file permissions or ACLs.
*/
#define SUPPORT_CHDIR
/*****************************
* MARK_HIDDEN_LINKS controls whether hidden links are shown with the title
* set by the HIDDEN_LINK_MARKER string in lynx.cfg
*/
#define MARK_HIDDEN_LINKS
/*****************************
* USE_TH_JP_AUTO_DETECT and KANJI_CODE_OVERRIDE are the macros
* for Japanese. - TH
*/
/*****************************
* USE_TH_JP_AUTO_DETECT enables a new Japanese charset detection routine.
* With the old detection strategy, Lynx always thought a document was
* written in mixture of three kanji codes (JIS, EUC and SJIS). The new
* strategy is for Lynx to first assume the document is written in one code
* or JIS + one other kanji code (JIS, EUC, SJIS, EUC+JIS and SJIS+JIS).
* The first assumption is usually correct, but if the assumption is wrong,
* Lynx falls back to the old assumption of the three kanji codes mixed.
*/
#define USE_TH_JP_AUTO_DETECT
/*****************************
* Uncomment the following line to enable the kanji code override routine.
* The code can be changed by pressing ^L. More precisely, this allows
* the user to override the assumption about the kanji code for the document
* which Lynx has made on the basis of a META tag and HTTP response.
*/
/*#define KANJI_CODE_OVERRIDE */
/**************************
* SSL_CERT_FILE contains valid SSL CA certificates. Set this to a string
* to provide a runtime default value.
*/
#define SSL_CERT_FILE NULL
/****************************************************************
* Section 4. Things you MUST check only if you plan to use Lynx
* in an anonymous account (allow public access to Lynx).
* This section may be skipped by those people building
* Lynx for private use only.
*
*/
/*****************************
* Enter the name of your anonymous account if you have one
* as ANONYMOUS_USER. UNIX systems will use a cuserid
* or get_login call to determine if the current user is
* the ANONYMOUS_USER. VMS systems will use getenv("USER").
*
* You may use the "-anonymous" option for multiple accounts,
* or for precautionary reasons in the anonymous account, as well.
*
* Specify privileges for the anonymous account below.
*
* It is very important to have this correctly defined or include
* the "-anonymous" command line option for invocation of Lynx
* in an anonymous account! If you do not you will be putting
* yourself at GREAT security risk!
*/
#define ANONYMOUS_USER ""
/*******************************
* In the following four pairs of defines,
* INSIDE_DOMAIN means users connecting from inside your local domain,
* OUTSIDE_DOMAIN means users connecting from outside your local domain.
*
* set to FALSE if you don't want users of your anonymous
* account to be able to telnet back out
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_TELNET TRUE
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_TELNET FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to use ftp
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_FTP TRUE
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_FTP FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to use rlogin
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_RLOGIN TRUE
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_RLOGIN FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to read news OR post news articles.
* These flags apply to "news", "nntp", "newspost", and "newsreply"
* URLs, but not to "snews", "snewspost", or "snewsreply"
* in case they are supported.
*/
#define CAN_ANONYMOUS_INSIDE_DOMAIN_READ_NEWS TRUE
#define CAN_ANONYMOUS_OUTSIDE_DOMAIN_READ_NEWS FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to goto random URLs. (The 'g' command)
*/
#define CAN_ANONYMOUS_GOTO TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to goto particular URLs.
*/
#define CAN_ANONYMOUS_GOTO_BIBP TRUE /* BIBP maps to HTTP */
#define CAN_ANONYMOUS_GOTO_CSO FALSE
#define CAN_ANONYMOUS_GOTO_FILE FALSE
#define CAN_ANONYMOUS_GOTO_FINGER TRUE
#define CAN_ANONYMOUS_GOTO_FTP FALSE
#define CAN_ANONYMOUS_GOTO_GOPHER FALSE
#define CAN_ANONYMOUS_GOTO_HTTP TRUE
#define CAN_ANONYMOUS_GOTO_HTTPS FALSE
#define CAN_ANONYMOUS_GOTO_LYNXCGI FALSE
#define CAN_ANONYMOUS_GOTO_LYNXEXEC FALSE
#define CAN_ANONYMOUS_GOTO_LYNXPROG FALSE
#define CAN_ANONYMOUS_GOTO_MAILTO TRUE
#define CAN_ANONYMOUS_GOTO_NEWS FALSE
#define CAN_ANONYMOUS_GOTO_NNTP FALSE
#define CAN_ANONYMOUS_GOTO_RLOGIN FALSE
#define CAN_ANONYMOUS_GOTO_SNEWS FALSE
#define CAN_ANONYMOUS_GOTO_TELNET FALSE
#define CAN_ANONYMOUS_GOTO_TN3270 FALSE
#define CAN_ANONYMOUS_GOTO_WAIS TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to specify a port in 'g'oto commands
* for telnet URLs.
*/
#define CAN_ANONYMOUS_GOTO_TELNET_PORT FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to jump to URLs (The 'J' command)
* via the shortcut entries in your JUMPFILE.
*/
#define CAN_ANONYMOUS_JUMP FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to mail
*/
#define CAN_ANONYMOUS_MAIL TRUE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to print
*/
#define CAN_ANONYMOUS_PRINT FALSE
/*******************************
* set to FALSE if users with anonymous restrictions should
* not be able to view configuration file (lynx.cfg) info
* via special LYNXCFG: links. (This does not control access
* to lynx.cfg as a normal file, e.g., through a "file:" URL,
* if other restrictions allow that.)
*/
#define CAN_ANONYMOUS_VIEW_LYNXCFG_INFO FALSE
/*******************************
* set to FALSE if users with anonymous restrictions should
* not be able to view extended configuration file (lynx.cfg)
* info @@@ or perform special config info functions (reloading
* at run-time) via special LYNXCFG: links @@@. This only applies
* if the lynxcfg_info" restriction controlled by the previous
* item is not in effect and if Lynx has been compiled without
* NO_CONFIG_INFO defined (--disable-config-info wasn't used
* if Lynx was built with the autoconf configure script).
* The extended info may include details on configuration file
* names and location and links for reading the files, as well
* as information on nesting of included configuration files.
*/
#define CAN_ANONYMOUS_VIEW_LYNXCFG_EXTENDED_INFO FALSE
/*******************************
* set to FALSE if users with anonymous restrictions should
* not be able to view information on compile time configuration
* via special LYNXCOMPILEOPTS: links. This only applies
* if the autoconf configure script was used to build Lynx
* AND --disable-config-info wasn't used, otherwise this
* special URL scheme isn't recognized anyway.
*/
#define CAN_ANONYMOUS_VIEW_COMPILEOPTS_INFO FALSE
/*******************************
* set to FALSE if you don't want users of your anonymous
* account to be able to 'g'oto special URLs for showing
* configuration info (LYNXCFG: and LYNXCOMPILEOPTS:) if
* they are otherwise allowed.
*/
#define CAN_ANONYMOUS_GOTO_CONFIGINFO FALSE
/*****************************
* Be sure you have read about and set defines above in Sections
* 1, 2 and 3 that could affect Lynx in an anonymous account,
* especially LOCAL_EXECUTION_LINKS_ALWAYS_OFF_FOR_ANONYMOUS.
*
* This ends the section specific to anonymous accounts.
*/
/*****************************
* These can be uncommmented to get more detail when debugging changes to
* the color-style and layout logic.
*/
/*#define DEBUG_APPCH 1*/
/*#define DEBUG_STYLE 1*/
#ifdef DEBUG_STYLE
#define CTRACE_STYLE(p) CTRACE2(TRACE_STYLE, p)
#else
#define CTRACE_STYLE(p) /* nothing */
#endif
/* #define DEBUG_SPLITLINE */
#ifdef DEBUG_SPLITLINE
#define CTRACE_SPLITLINE(p) CTRACE(p)
#else
#define CTRACE_SPLITLINE(p) /*nothing */
#endif
#endif /* USERDEFS_H */