dnsmasq conf with different net

1 files changed, 34 insertions, 15 deletions

diff --git a/tools/conf/etc/dnsmasq.conf b/tools/conf/etc/dnsmasq.conf
index f8f7201..b8da62e 100644
--- a/tools/conf/etc/dnsmasq.conf
+++ b/tools/conf/etc/dnsmasq.conf
@@ -33,7 +33,7 @@ proxy-dnssec
 # record somewhere between the root and the domain does not exist. 
 # The cost of setting this is that even queries in unsigned domains will need
 # one or more extra DNS queries to verify.
-#dnssec-check-unsigned
+dnssec-check-unsigned
 
 # Uncomment this to filter useless windows-originated DNS requests
 # which can trigger dial-on-demand links needlessly.
@@ -52,7 +52,7 @@ proxy-dnssec
 # to  be  up.  Uncommenting this forces dnsmasq to try each query
 # with  each  server  strictly  in  the  order  they   appear   in
 # /etc/resolv.conf
-#strict-order
+strict-order
 
 # If you don't want dnsmasq to read /etc/resolv.conf or any other
 # file, getting its servers from this file instead (see below), then
@@ -66,8 +66,10 @@ no-poll
 # Add other name servers here, with domain specs if they are for
 # non-public domains.
 #server=/localnet/192.168.0.1
-server=127.0.0.1#40
+#server=127.0.0.1#40
 #server=213.73.91.35
+#server=37.235.1.174
+server=84.200.69.80
 
 # Example of routing PTR queries to nameservers: this will send all
 # address->name queries for 192.168.3/24 to nameserver 10.1.2.3
@@ -75,7 +77,7 @@ server=127.0.0.1#40
 
 # Add local-only domains here, queries in these domains are answered
 # from /etc/hosts or DHCP only.
-local=/core/
+local=/c9/
 
 # Add domains which you want to force to an IP address here.
 # The example below send any host in double-click.net to a local
@@ -102,22 +104,27 @@ local=/core/
 # than the default, edit the following lines.
 #user=nobody
 #group=nobody
-
+# NOT READY FOR PRODUCTION
+user=root
+group=root
 # If you want dnsmasq to listen for DHCP and DNS requests only on
 # specified interfaces (and the loopback) give the name of the
 # interface (eg eth0) here.
 # Repeat the line for more than one interface.
 interface=lo
 interface=br0
+#interface=wlp7s0
 
 # Or you can specify which interface _not_ to listen on
-except-interface=wlp7s0
-except-interface=enp8s0
+#except-interface=wlp7s0
+#except-interface=enp8s0
 
 # Or which to listen on by address (remember to include 127.0.0.1 if
 # you use this.)
-listen-address=127.0.0.1
-#listen-address=10.0.0.1
+#listen-address=127.0.0.1
+#listen-address=10.0.0.254
+#listen-address=192.168.1.33
+
 # If you want dnsmasq to provide only DNS service on an interface,
 # configure it as shown above, and then use the following line to
 # disable DHCP and TFTP on it.
@@ -132,7 +139,7 @@ no-dhcp-interface=lo
 # want dnsmasq to really bind only the interfaces it is listening on,
 # uncomment this option. About the only time you may need this is when
 # running another nameserver on the same machine.
-bind-interfaces
+#bind-interfaces
 
 # If you don't want dnsmasq to read /etc/hosts, uncomment the
 # following line.
@@ -153,7 +160,8 @@ expand-hosts
 # 2) Sets the "domain" DHCP option thereby potentially setting the
 #    domain of all systems configured by DHCP
 # 3) Provides the domain part for "expand-hosts"
-domain=core
+domain=c9,10.0.0.0/8
+dhcp-option=15,c9
 
 # Set a different domain for a particular subnet
 #domain=wireless.thekelleys.org.uk,192.168.2.0/24
@@ -167,7 +175,7 @@ domain=core
 # repeat this for each network on which you want to supply DHCP
 # service.
 #dhcp-range=192.168.0.50,192.168.0.150,12h
-dhcp-range=br0,10.0.0.5,10.0.0.50,2h
+dhcp-range=10.0.0.100,10.0.0.200,255.0.0.0,2h
 
 # This is an example of a DHCP range where the netmask is given. This
 # is needed for networks we reach the dnsmasq DHCP server via a relay
@@ -239,7 +247,11 @@ dhcp-range=br0,10.0.0.5,10.0.0.50,2h
 # Always allocate the host with Ethernet address 11:22:33:44:55:66
 # The IP address 192.168.0.60
 #dhcp-host=11:22:33:44:55:66,192.168.0.60
+#dhcp-host=54:60:BE:EF:5C:72,10.0.0.2
 
+dhcp-host=50:67:f0:a1:bc:ab,cr1,10.0.0.1,infinite
+dhcp-host=00:14:BF:6E:61:21,cr2,10.0.0.2,infinite
+dhcp-host=54:60:BE:EF:5C:64,c14,10.0.0.4,infinite
 # Always set the name of the host with hardware address
 # 11:22:33:44:55:66 to be "fred"
 #dhcp-host=11:22:33:44:55:66,fred
@@ -339,9 +351,12 @@ dhcp-range=br0,10.0.0.5,10.0.0.50,2h
 # are some options which are recommended, they are detailed at the
 # end of this section.
 
+dhcp-option=1,255.0.0.0
+
 # Override the default route supplied by dnsmasq, which assumes the
 # router is the same machine as the one running dnsmasq.
-#dhcp-option=3,1.2.3.4
+#dhcp-option=3,10.0.0.1
+dhcp-option=3,10.0.0.1
 
 # Do the same thing, but using the option name
 #dhcp-option=option:router,1.2.3.4
@@ -352,6 +367,9 @@ dhcp-range=br0,10.0.0.5,10.0.0.50,2h
 # for all other option numbers.
 #dhcp-option=3
 
+# DNS
+dhcp-option=6,10.0.0.254,10.0.0.254
+
 # Set the NTP time server addresses to 192.168.0.4 and 10.10.0.5
 #dhcp-option=option:ntp-server,192.168.0.4,10.10.0.5
 
@@ -416,6 +434,7 @@ dhcp-range=br0,10.0.0.5,10.0.0.50,2h
 
 # Send RFC-3442 classless static routes (note the netmask encoding)
 #dhcp-option=121,192.168.1.0/24,1.2.3.4,10.0.0.0/8,5.6.7.8
+dhcp-option=33,10.0.0.1
 
 # Send vendor-class specific options encapsulated in DHCP option 43.
 # The meaning of the options is defined by the vendor-class so
@@ -567,7 +586,7 @@ dhcp-range=br0,10.0.0.5,10.0.0.50,2h
 #dhcp-script=/bin/echo
 
 # Set the cachesize here.
-cache-size=30000
+cache-size=60000
 
 # If you want to disable negative caching, uncomment this.
 no-negcache
@@ -666,7 +685,7 @@ local-ttl=60
 log-queries
 
 # Log lots of extra information about DHCP transactions.
-#log-dhcp
+log-dhcp
 
 # Include another lot of configuration options.
 #conf-file=/etc/dnsmasq.more.conf