release 0.7.0

1 files changed, 533 insertions, 0 deletions

diff --git a/linux/ports/linux-gnu/cpu_optimizations.patch b/linux/ports/linux-gnu/cpu_optimizations.patch
new file mode 100644
index 0000000..5df5066
--- /dev/null
+++ b/linux/ports/linux-gnu/cpu_optimizations.patch
@@ -0,0 +1,533 @@
+WARNING
+This patch works with gcc versions 4.9+ and with kernel version 3.15+ and should
+NOT be applied when compiling on older versions of gcc due to key name changes
+of the march flags introduced with the version 4.9 release of gcc.[1]
+
+Use the older version of this patch hosted on the same github for older
+versions of gcc.
+
+FEATURES
+This patch adds additional CPU options to the Linux kernel accessible under:
+ Processor type and features  --->
+  Processor family --->
+
+The expanded microarchitectures include:
+* AMD Improved K8-family
+* AMD K10-family
+* AMD Family 10h (Barcelona)
+* AMD Family 14h (Bobcat)
+* AMD Family 16h (Jaguar)
+* AMD Family 15h (Bulldozer)
+* AMD Family 15h (Piledriver)
+* AMD Family 15h (Steamroller)
+* AMD Family 15h (Excavator)
+* AMD Family 17h (Zen)
+* Intel Silvermont low-power processors
+* Intel 1st Gen Core i3/i5/i7 (Nehalem)
+* Intel 1.5 Gen Core i3/i5/i7 (Westmere)
+* Intel 2nd Gen Core i3/i5/i7 (Sandybridge)
+* Intel 3rd Gen Core i3/i5/i7 (Ivybridge)
+* Intel 4th Gen Core i3/i5/i7 (Haswell)
+* Intel 5th Gen Core i3/i5/i7 (Broadwell)
+* Intel 6th Gen Core i3/i5.i7 (Skylake)
+
+It also offers to compile passing the 'native' option which, "selects the CPU
+to generate code for at compilation time by determining the processor type of
+the compiling machine. Using -march=native enables all instruction subsets
+supported by the local machine and will produce code optimized for the local
+machine under the constraints of the selected instruction set."[3]
+
+MINOR NOTES
+This patch also changes 'atom' to 'bonnell' in accordance with the gcc v4.9
+changes. Note that upstream is using the deprecated 'match=atom' flags when I
+believe it should use the newer 'march=bonnell' flag for atom processors.[2]
+
+It is not recommended to compile on Atom-CPUs with the 'native' option.[4] The
+recommendation is to use the 'atom' option instead.
+
+BENEFITS
+Small but real speed increases are measurable using a make endpoint comparing
+a generic kernel to one built with one of the respective microarchs.
+
+See the following experimental evidence supporting this statement:
+https://github.com/graysky2/kernel_gcc_patch
+
+REQUIREMENTS
+linux version >=3.15 && <4.13
+gcc version >=4.9
+
+ACKNOWLEDGMENTS
+This patch builds on the seminal work by Jeroen.[5]
+
+REFERENCES
+1. https://gcc.gnu.org/gcc-4.9/changes.html
+2. https://bugzilla.kernel.org/show_bug.cgi?id=77461
+3. https://gcc.gnu.org/onlinedocs/gcc/x86-Options.html
+4. https://github.com/graysky2/kernel_gcc_patch/issues/15
+5. http://www.linuxforge.net/docs/linux/linux-gcc.php
+
+--- a/arch/x86/include/asm/module.h	2016-12-11 14:17:54.000000000 -0500
++++ b/arch/x86/include/asm/module.h	2017-01-06 20:44:36.602227264 -0500
+@@ -15,6 +15,24 @@
+ #define MODULE_PROC_FAMILY "586MMX "
+ #elif defined CONFIG_MCORE2
+ #define MODULE_PROC_FAMILY "CORE2 "
++#elif defined CONFIG_MNATIVE
++#define MODULE_PROC_FAMILY "NATIVE "
++#elif defined CONFIG_MNEHALEM
++#define MODULE_PROC_FAMILY "NEHALEM "
++#elif defined CONFIG_MWESTMERE
++#define MODULE_PROC_FAMILY "WESTMERE "
++#elif defined CONFIG_MSILVERMONT
++#define MODULE_PROC_FAMILY "SILVERMONT "
++#elif defined CONFIG_MSANDYBRIDGE
++#define MODULE_PROC_FAMILY "SANDYBRIDGE "
++#elif defined CONFIG_MIVYBRIDGE
++#define MODULE_PROC_FAMILY "IVYBRIDGE "
++#elif defined CONFIG_MHASWELL
++#define MODULE_PROC_FAMILY "HASWELL "
++#elif defined CONFIG_MBROADWELL
++#define MODULE_PROC_FAMILY "BROADWELL "
++#elif defined CONFIG_MSKYLAKE
++#define MODULE_PROC_FAMILY "SKYLAKE "
+ #elif defined CONFIG_MATOM
+ #define MODULE_PROC_FAMILY "ATOM "
+ #elif defined CONFIG_M686
+@@ -33,6 +51,26 @@
+ #define MODULE_PROC_FAMILY "K7 "
+ #elif defined CONFIG_MK8
+ #define MODULE_PROC_FAMILY "K8 "
++#elif defined CONFIG_MK8SSE3
++#define MODULE_PROC_FAMILY "K8SSE3 "
++#elif defined CONFIG_MK10
++#define MODULE_PROC_FAMILY "K10 "
++#elif defined CONFIG_MBARCELONA
++#define MODULE_PROC_FAMILY "BARCELONA "
++#elif defined CONFIG_MBOBCAT
++#define MODULE_PROC_FAMILY "BOBCAT "
++#elif defined CONFIG_MBULLDOZER
++#define MODULE_PROC_FAMILY "BULLDOZER "
++#elif defined CONFIG_MPILEDRIVER
++#define MODULE_PROC_FAMILY "PILEDRIVER "
++#elif defined CONFIG_MSTEAMROLLER
++#define MODULE_PROC_FAMILY "STEAMROLLER "
++#elif defined CONFIG_MJAGUAR
++#define MODULE_PROC_FAMILY "JAGUAR "
++#elif defined CONFIG_MEXCAVATOR
++#define MODULE_PROC_FAMILY "EXCAVATOR "
++#elif defined CONFIG_MZEN
++#define MODULE_PROC_FAMILY "ZEN "
+ #elif defined CONFIG_MELAN
+ #define MODULE_PROC_FAMILY "ELAN "
+ #elif defined CONFIG_MCRUSOE
+--- a/arch/x86/Kconfig.cpu	2016-12-11 14:17:54.000000000 -0500
++++ b/arch/x86/Kconfig.cpu	2017-01-06 20:46:14.004109597 -0500
+@@ -115,6 +115,7 @@ config MPENTIUMM
+ config MPENTIUM4
+ 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+ 	depends on X86_32
++	select X86_P6_NOP
+ 	---help---
+ 	  Select this for Intel Pentium 4 chips.  This includes the
+ 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
+@@ -147,9 +148,8 @@ config MPENTIUM4
+ 		-Paxville
+ 		-Dempsey
+ 
+-
+ config MK6
+-	bool "K6/K6-II/K6-III"
++	bool "AMD K6/K6-II/K6-III"
+ 	depends on X86_32
+ 	---help---
+ 	  Select this for an AMD K6-family processor.  Enables use of
+@@ -157,7 +157,7 @@ config MK6
+ 	  flags to GCC.
+ 
+ config MK7
+-	bool "Athlon/Duron/K7"
++	bool "AMD Athlon/Duron/K7"
+ 	depends on X86_32
+ 	---help---
+ 	  Select this for an AMD Athlon K7-family processor.  Enables use of
+@@ -165,12 +165,83 @@ config MK7
+ 	  flags to GCC.
+ 
+ config MK8
+-	bool "Opteron/Athlon64/Hammer/K8"
++	bool "AMD Opteron/Athlon64/Hammer/K8"
+ 	---help---
+ 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
+ 	  Enables use of some extended instructions, and passes appropriate
+ 	  optimization flags to GCC.
+ 
++config MK8SSE3
++	bool "AMD Opteron/Athlon64/Hammer/K8 with SSE3"
++	---help---
++	  Select this for improved AMD Opteron or Athlon64 Hammer-family processors.
++	  Enables use of some extended instructions, and passes appropriate
++	  optimization flags to GCC.
++
++config MK10
++	bool "AMD 61xx/7x50/PhenomX3/X4/II/K10"
++	---help---
++	  Select this for an AMD 61xx Eight-Core Magny-Cours, Athlon X2 7x50,
++		Phenom X3/X4/II, Athlon II X2/X3/X4, or Turion II-family processor.
++	  Enables use of some extended instructions, and passes appropriate
++	  optimization flags to GCC.
++
++config MBARCELONA
++	bool "AMD Barcelona"
++	---help---
++	  Select this for AMD Family 10h Barcelona processors.
++
++	  Enables -march=barcelona
++
++config MBOBCAT
++	bool "AMD Bobcat"
++	---help---
++	  Select this for AMD Family 14h Bobcat processors.
++
++	  Enables -march=btver1
++
++config MJAGUAR
++	bool "AMD Jaguar"
++	---help---
++	  Select this for AMD Family 16h Jaguar processors.
++
++	  Enables -march=btver2
++
++config MBULLDOZER
++	bool "AMD Bulldozer"
++	---help---
++	  Select this for AMD Family 15h Bulldozer processors.
++
++	  Enables -march=bdver1
++
++config MPILEDRIVER
++	bool "AMD Piledriver"
++	---help---
++	  Select this for AMD Family 15h Piledriver processors.
++
++	  Enables -march=bdver2
++
++config MSTEAMROLLER
++	bool "AMD Steamroller"
++	---help---
++	  Select this for AMD Family 15h Steamroller processors.
++
++	  Enables -march=bdver3
++
++config MEXCAVATOR
++	bool "AMD Excavator"
++	---help---
++	  Select this for AMD Family 15h Excavator processors.
++
++	  Enables -march=bdver4
++
++config MZEN
++	bool "AMD Zen"
++	---help---
++	  Select this for AMD Family 17h Zen processors.
++
++	  Enables -march=znver1
++
+ config MCRUSOE
+ 	bool "Crusoe"
+ 	depends on X86_32
+@@ -252,6 +323,7 @@ config MVIAC7
+ 
+ config MPSC
+ 	bool "Intel P4 / older Netburst based Xeon"
++	select X86_P6_NOP
+ 	depends on X86_64
+ 	---help---
+ 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+@@ -261,8 +333,19 @@ config MPSC
+ 	  using the cpu family field
+ 	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+ 
++config MATOM
++	bool "Intel Atom"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for the Intel Atom platform. Intel Atom CPUs have an
++	  in-order pipelining architecture and thus can benefit from
++	  accordingly optimized code. Use a recent GCC with specific Atom
++	  support in order to fully benefit from selecting this option.
++
+ config MCORE2
+-	bool "Core 2/newer Xeon"
++	bool "Intel Core 2"
++	select X86_P6_NOP
+ 	---help---
+ 
+ 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
+@@ -270,14 +353,79 @@ config MCORE2
+ 	  family in /proc/cpuinfo. Newer ones have 6 and older ones 15
+ 	  (not a typo)
+ 
+-config MATOM
+-	bool "Intel Atom"
++	  Enables -march=core2
++
++config MNEHALEM
++	bool "Intel Nehalem"
++	select X86_P6_NOP
+ 	---help---
+ 
+-	  Select this for the Intel Atom platform. Intel Atom CPUs have an
+-	  in-order pipelining architecture and thus can benefit from
+-	  accordingly optimized code. Use a recent GCC with specific Atom
+-	  support in order to fully benefit from selecting this option.
++	  Select this for 1st Gen Core processors in the Nehalem family.
++
++	  Enables -march=nehalem
++
++config MWESTMERE
++	bool "Intel Westmere"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for the Intel Westmere formerly Nehalem-C family.
++
++	  Enables -march=westmere
++
++config MSILVERMONT
++	bool "Intel Silvermont"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for the Intel Silvermont platform.
++
++	  Enables -march=silvermont
++
++config MSANDYBRIDGE
++	bool "Intel Sandy Bridge"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for 2nd Gen Core processors in the Sandy Bridge family.
++
++	  Enables -march=sandybridge
++
++config MIVYBRIDGE
++	bool "Intel Ivy Bridge"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for 3rd Gen Core processors in the Ivy Bridge family.
++
++	  Enables -march=ivybridge
++
++config MHASWELL
++	bool "Intel Haswell"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for 4th Gen Core processors in the Haswell family.
++
++	  Enables -march=haswell
++
++config MBROADWELL
++	bool "Intel Broadwell"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for 5th Gen Core processors in the Broadwell family.
++
++	  Enables -march=broadwell
++
++config MSKYLAKE
++	bool "Intel Skylake"
++	select X86_P6_NOP
++	---help---
++
++	  Select this for 6th Gen Core processors in the Skylake family.
++
++	  Enables -march=skylake
+ 
+ config GENERIC_CPU
+ 	bool "Generic-x86-64"
+@@ -286,6 +434,19 @@ config GENERIC_CPU
+ 	  Generic x86-64 CPU.
+ 	  Run equally well on all x86-64 CPUs.
+ 
++config MNATIVE
++ bool "Native optimizations autodetected by GCC"
++ ---help---
++
++   GCC 4.2 and above support -march=native, which automatically detects
++   the optimum settings to use based on your processor. -march=native 
++   also detects and applies additional settings beyond -march specific
++   to your CPU, (eg. -msse4). Unless you have a specific reason not to
++   (e.g. distcc cross-compiling), you should probably be using
++   -march=native rather than anything listed below.
++
++   Enables -march=native
++
+ endchoice
+ 
+ config X86_GENERIC
+@@ -310,7 +471,7 @@ config X86_INTERNODE_CACHE_SHIFT
+ config X86_L1_CACHE_SHIFT
+ 	int
+ 	default "7" if MPENTIUM4 || MPSC
+-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
++	default "6" if MK7 || MK8 || MK8SSE3 || MK10 || MBARCELONA || MBOBCAT || MBULLDOZER || MPILEDRIVER || MSTEAMROLLER || MEXCAVATOR || MZEN || MJAGUAR || MPENTIUMM || MCORE2 || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MNATIVE || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
+ 	default "4" if MELAN || M486 || MGEODEGX1
+ 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
+ 
+@@ -341,45 +502,46 @@ config X86_ALIGNMENT_16
+ 
+ config X86_INTEL_USERCOPY
+ 	def_bool y
+-	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
++	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK8SSE3 || MK7 || MEFFICEON || MCORE2 || MK10 || MBARCELONA || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MNATIVE
+ 
+ config X86_USE_PPRO_CHECKSUM
+ 	def_bool y
+-	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
++	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MK10 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MK8SSE3 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MATOM || MNATIVE
+ 
+ config X86_USE_3DNOW
+ 	def_bool y
+ 	depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML
+ 
+-#
+-# P6_NOPs are a relatively minor optimization that require a family >=
+-# 6 processor, except that it is broken on certain VIA chips.
+-# Furthermore, AMD chips prefer a totally different sequence of NOPs
+-# (which work on all CPUs).  In addition, it looks like Virtual PC
+-# does not understand them.
+-#
+-# As a result, disallow these if we're not compiling for X86_64 (these
+-# NOPs do work on all x86-64 capable chips); the list of processors in
+-# the right-hand clause are the cores that benefit from this optimization.
+-#
+ config X86_P6_NOP
+-	def_bool y
+-	depends on X86_64
+-	depends on (MCORE2 || MPENTIUM4 || MPSC)
++	default n
++	bool "Support for P6_NOPs on Intel chips"
++	depends on (MCORE2 || MPENTIUM4 || MPSC || MATOM || MNEHALEM || MWESTMERE || MSILVERMONT  || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MNATIVE)
++	---help---
++	P6_NOPs are a relatively minor optimization that require a family >=
++	6 processor, except that it is broken on certain VIA chips.
++	Furthermore, AMD chips prefer a totally different sequence of NOPs
++	(which work on all CPUs).  In addition, it looks like Virtual PC
++	does not understand them.
++
++	As a result, disallow these if we're not compiling for X86_64 (these
++	NOPs do work on all x86-64 capable chips); the list of processors in
++	the right-hand clause are the cores that benefit from this optimization.
++
++	Say Y if you have Intel CPU newer than Pentium Pro, N otherwise.
+ 
+ config X86_TSC
+ 	def_bool y
+-	depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
++	depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MK8SSE3 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MNATIVE || MATOM) || X86_64
+ 
+ config X86_CMPXCHG64
+ 	def_bool y
+-	depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM
++	depends on X86_PAE || X86_64 || MCORE2 || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM || MNATIVE
+ 
+ # this should be set for all -march=.. options where the compiler
+ # generates cmov.
+ config X86_CMOV
+ 	def_bool y
+-	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
++	depends on (MK8 || MK8SSE3 || MK10 || MBARCELONA || MBOBCAT || MBULLDOZER || MPILEDRIVER || MSTEAMROLLER || MEXCAVATOR || MZEN || MJAGUAR || MK7 || MCORE2 || MNEHALEM || MWESTMERE || MSILVERMONT || MSANDYBRIDGE || MIVYBRIDGE || MHASWELL || MBROADWELL || MSKYLAKE || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MNATIVE || MATOM || MGEODE_LX)
+ 
+ config X86_MINIMUM_CPU_FAMILY
+ 	int
+--- a/arch/x86/Makefile	2016-12-11 14:17:54.000000000 -0500
++++ b/arch/x86/Makefile	2017-01-06 20:44:36.603227283 -0500
+@@ -104,13 +104,40 @@ else
+ 	KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
+ 
+         # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
++        cflags-$(CONFIG_MNATIVE) += $(call cc-option,-march=native)
+         cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)
++        cflags-$(CONFIG_MK8SSE3) += $(call cc-option,-march=k8-sse3,-mtune=k8)
++        cflags-$(CONFIG_MK10) += $(call cc-option,-march=amdfam10)
++        cflags-$(CONFIG_MBARCELONA) += $(call cc-option,-march=barcelona)
++        cflags-$(CONFIG_MBOBCAT) += $(call cc-option,-march=btver1)
++        cflags-$(CONFIG_MJAGUAR) += $(call cc-option,-march=btver2)
++        cflags-$(CONFIG_MBULLDOZER) += $(call cc-option,-march=bdver1)
++        cflags-$(CONFIG_MPILEDRIVER) += $(call cc-option,-march=bdver2)
++        cflags-$(CONFIG_MSTEAMROLLER) += $(call cc-option,-march=bdver3)
++        cflags-$(CONFIG_MEXCAVATOR) += $(call cc-option,-march=bdver4)
++        cflags-$(CONFIG_MZEN) += $(call cc-option,-march=znver1)
+         cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona)
+ 
+         cflags-$(CONFIG_MCORE2) += \
+-                $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+-	cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
+-		$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
++                $(call cc-option,-march=core2,$(call cc-option,-mtune=core2))
++        cflags-$(CONFIG_MNEHALEM) += \
++                $(call cc-option,-march=nehalem,$(call cc-option,-mtune=nehalem))
++        cflags-$(CONFIG_MWESTMERE) += \
++                $(call cc-option,-march=westmere,$(call cc-option,-mtune=westmere))
++        cflags-$(CONFIG_MSILVERMONT) += \
++                $(call cc-option,-march=silvermont,$(call cc-option,-mtune=silvermont))
++        cflags-$(CONFIG_MSANDYBRIDGE) += \
++                $(call cc-option,-march=sandybridge,$(call cc-option,-mtune=sandybridge))
++        cflags-$(CONFIG_MIVYBRIDGE) += \
++                $(call cc-option,-march=ivybridge,$(call cc-option,-mtune=ivybridge))
++        cflags-$(CONFIG_MHASWELL) += \
++                $(call cc-option,-march=haswell,$(call cc-option,-mtune=haswell))
++        cflags-$(CONFIG_MBROADWELL) += \
++                $(call cc-option,-march=broadwell,$(call cc-option,-mtune=broadwell))
++        cflags-$(CONFIG_MSKYLAKE) += \
++                $(call cc-option,-march=skylake,$(call cc-option,-mtune=skylake))
++        cflags-$(CONFIG_MATOM) += $(call cc-option,-march=bonnell) \
++                $(call cc-option,-mtune=bonnell,$(call cc-option,-mtune=generic))
+         cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
+         KBUILD_CFLAGS += $(cflags-y)
+ 
+--- a/arch/x86/Makefile_32.cpu	2016-12-11 14:17:54.000000000 -0500
++++ b/arch/x86/Makefile_32.cpu	2017-01-06 20:44:36.603227283 -0500
+@@ -23,7 +23,18 @@ cflags-$(CONFIG_MK6)		+= -march=k6
+ # Please note, that patches that add -march=athlon-xp and friends are pointless.
+ # They make zero difference whatsosever to performance at this time.
+ cflags-$(CONFIG_MK7)		+= -march=athlon
++cflags-$(CONFIG_MNATIVE) += $(call cc-option,-march=native)
+ cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,-march=athlon)
++cflags-$(CONFIG_MK8SSE3)		+= $(call cc-option,-march=k8-sse3,-march=athlon)
++cflags-$(CONFIG_MK10)	+= $(call cc-option,-march=amdfam10,-march=athlon)
++cflags-$(CONFIG_MBARCELONA)	+= $(call cc-option,-march=barcelona,-march=athlon)
++cflags-$(CONFIG_MBOBCAT)	+= $(call cc-option,-march=btver1,-march=athlon)
++cflags-$(CONFIG_MJAGUAR)	+= $(call cc-option,-march=btver2,-march=athlon)
++cflags-$(CONFIG_MBULLDOZER)	+= $(call cc-option,-march=bdver1,-march=athlon)
++cflags-$(CONFIG_MPILEDRIVER)	+= $(call cc-option,-march=bdver2,-march=athlon)
++cflags-$(CONFIG_MSTEAMROLLER)	+= $(call cc-option,-march=bdver3,-march=athlon)
++cflags-$(CONFIG_MEXCAVATOR)	+= $(call cc-option,-march=bdver4,-march=athlon)
++cflags-$(CONFIG_MZEN)	+= $(call cc-option,-march=znver1,-march=athlon)
+ cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+ cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+ cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
+@@ -32,8 +43,16 @@ cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-
+ cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
+ cflags-$(CONFIG_MVIAC7)		+= -march=i686
+ cflags-$(CONFIG_MCORE2)		+= -march=i686 $(call tune,core2)
+-cflags-$(CONFIG_MATOM)		+= $(call cc-option,-march=atom,$(call cc-option,-march=core2,-march=i686)) \
+-	$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
++cflags-$(CONFIG_MNEHALEM)	+= -march=i686 $(call tune,nehalem)
++cflags-$(CONFIG_MWESTMERE)	+= -march=i686 $(call tune,westmere)
++cflags-$(CONFIG_MSILVERMONT)	+= -march=i686 $(call tune,silvermont)
++cflags-$(CONFIG_MSANDYBRIDGE)	+= -march=i686 $(call tune,sandybridge)
++cflags-$(CONFIG_MIVYBRIDGE)	+= -march=i686 $(call tune,ivybridge)
++cflags-$(CONFIG_MHASWELL)	+= -march=i686 $(call tune,haswell)
++cflags-$(CONFIG_MBROADWELL)	+= -march=i686 $(call tune,broadwell)
++cflags-$(CONFIG_MSKYLAKE)	+= -march=i686 $(call tune,skylake)
++cflags-$(CONFIG_MATOM)		+= $(call cc-option,-march=bonnell,$(call cc-option,-march=core2,-march=i686)) \
++	$(call cc-option,-mtune=bonnell,$(call cc-option,-mtune=generic))
+ 
+ # AMD Elan support
+ cflags-$(CONFIG_MELAN)		+= -march=i486