Merge branch 'master' into develop

6 files changed, 149 insertions, 97 deletions

diff --git a/tools/conf/srv/gitolite/.gitolite.rc b/tools/conf/srv/gitolite/.gitolite.rc
index fa18e4e..d2c80b7 100644
--- a/tools/conf/srv/gitolite/.gitolite.rc
+++ b/tools/conf/srv/gitolite/.gitolite.rc
@@ -28,7 +28,7 @@
     # logging options
     # 1. leave this section as is for 'normal' gitolite logging (default)
     # 2. uncomment this line to log ONLY to syslog:
-    # LOG_DEST                      => 'syslog',
+    LOG_DEST                      => 'syslog',
     # 3. uncomment this line to log to syslog and the normal gitolite log:
     # LOG_DEST                      => 'syslog,normal',
     # 4. prefixing "repo-log," to any of the above will **also** log just the
diff --git a/tools/conf/srv/gitolite/deploy-web-doc b/tools/conf/srv/gitolite/deploy-web-doc
index ae8e2db..b836515 100755
--- a/tools/conf/srv/gitolite/deploy-web-doc
+++ b/tools/conf/srv/gitolite/deploy-web-doc
@@ -2,7 +2,7 @@
 ######################################################################
 #
 # Put this file in your gitolite-admin;
-# ~/gitolite-admin/local/hooks/repo-specific/deploy-web-doc
+# ~/gitolite-admin/local/hooks/repo-specific/hook-deploy-web
 #
 # set host to empty to create package for each push
 # or set remote host to create package based on last deployed push
diff --git a/tools/conf/srv/gitolite/deploy-web.sh b/tools/conf/srv/gitolite/deploy-web.sh
index 01e92ac..86d2026 100644
--- a/tools/conf/srv/gitolite/deploy-web.sh
+++ b/tools/conf/srv/gitolite/deploy-web.sh
@@ -3,7 +3,7 @@
 pkg_path=$1
 
 www_root="/srv/www"
-www_user="nginx"
+www_user="www"
 www_group="www"
 
 pkg_file="${pkg_path}/project"
diff --git a/tools/conf/srv/gitolite/gitolite.conf b/tools/conf/srv/gitolite/gitolite.conf
index 7975549..2685d90 100644
--- a/tools/conf/srv/gitolite/gitolite.conf
+++ b/tools/conf/srv/gitolite/gitolite.conf
@@ -1,80 +1,73 @@
-@guests         =   gitweb
-@interns        =   silvino
-@dev            =   silvino
-@teamleads      =   silvino
-@staff          =   @interns @dev @teamleads
+@guests         =   bob
+@interns        =   bob
+@dev            =   bob alice
+@teamleads      =   druid bob
+@staff          =   @interns @dev
+
 
 repo  @secret
     - = @guests
     option deny-rules = 1
 
 repo @floss
-    RW+                     =   @dev @staff
+    RW+                     =   @staff
     R                       =   @all
 
 repo @project
     RW+                     =   @teamleads
-    -   master              =   @dev
-    -   refs/tags/v[0-9]    =   @dev
-    RW+ develop/            =   @dev
-    RW+ feature/            =   @dev
-    RW+ hot-fix/            =   @dev
-    RW                      =   @dev
-    R                       =   @interns
+    -   master              =   @staff @guests
+    -   refs/tags/          =   @staff @guests
+    RW+ develop/            =   @staff
+    RW+ feature/            =   @staff
+    RW+ hot-fix/            =   @staff
+    RW                      =   @staff
+    R                       =   @all
 
 repo @mirror
+    R                       =   @all
     RW+ release/            =   @teamleads
     RW+ develop/            =   @dev
     RW+ feature/            =   @dev
     RW+ hot-fix/            =   @dev
-    R                       =   @all
+    option upstream.nice    = 120
 
 repo gitolite-admin
     RW+     =   gitolite
 
-repo doc machine-ports pmwiki assistant
-    config gitweb.owner         =   "Hive Team"
-    config gitweb.category      =   "machine"
-
-repo linux-pck
-    config gitweb.owner         =   "Hive Team"
-    config gitweb.category      =   "mirrors"
+repo mate
+    config gitweb.description   = "Mate ports"
 
-repo opt core contrib
-    config gitweb.owner         =   "crux"
-    config gitweb.category      =   "crux"
+repo kde5
+    config gitweb.description   = "Kde5 ports"
 
-repo doc
-    config gitweb.description   =   "documentation"
-    option hook.post-receive     =  deploy-web-doc
-
-repo machine-ports
-    config gitweb.description   =   "ports"
+repo xorg
+    config gitweb.description   = "Xorg ports"
 
-repo pmwiki
-    config gitweb.description   =   "wiki"
-    option hook.post-receive     =  deploy-web-doc
+repo contrib
+    config gitweb.description   = "Contrib ports"
 
-repo assistant
-    config gitweb.owner         =   "Hive Team"
-    config gitweb.description   =   "open assistant"
+repo opt
+    config gitweb.description   = "Opt ports"
 
 repo core
-    config gitweb.description   =   "crux core collection"
+    config gitweb.description   = "Core ports"
 
-repo opt
-    config gitweb.description   =   "crux opt collection"
+repo doc
+    config gitweb.description   = "System doc."
+    option hook.post-receive    = deploy-web-doc
 
-repo contrib
-    config gitweb.description   =   "crux contrib collection"
+repo ports
+    config gitweb.description   = "Extra ports."
+    option hook.post-receive    = deploy-web-doc
 
-repo linux-pck
-    config gitweb.description   =   "PCK or Parabola Community Kernel are multiple patches, pf-kernel and zen-kernel for Linux-libre kernel"
-    option      upstream.url    = git://git.parabola.nu/pck.git
-    option      upstream.nice   = 120
+repo doc
+    config gitweb.owner         =   "Team"
+    config gitweb.category      =   "Repositories"
 
+repo core opt contrib ports xorg iso mate kde5
+    config gitweb.owner         =   "Team"
+    config gitweb.category      =   "Host Ports"
 
-@secret    =   gitolite-admin
-@project   =   doc machine-ports pmwiki assistant
-@project   =   core opt contrib
-@mirror    =   linux-pck
+@secret    = gitolite-admin
+@project   = doc
+@project   = core opt contrib ports xorg iso mate kde5 webdata
diff --git a/tools/conf/srv/pgsql/data/pg_hba.conf b/tools/conf/srv/pgsql/data/pg_hba.conf
index af37ab4..f60af44 100644
--- a/tools/conf/srv/pgsql/data/pg_hba.conf
+++ b/tools/conf/srv/pgsql/data/pg_hba.conf
@@ -81,20 +81,14 @@
 # TYPE  DATABASE        USER            ADDRESS                 METHOD
 
 # "local" is for Unix domain socket connections only
-#local   all             all                                     trust
+local   all             postgres                                scram-sha-256
+#local   all             postgres                                trust
 # IPv4 local connections:
-#host    all             all             127.0.0.1/32            trust
+host    all             postgres        127.0.0.1/32            scram-sha-256
 # IPv6 local connections:
-#host    all             all             ::1/128                 trust
+host    all             postgres        ::1/128                 scram-sha-256
 # Allow replication connections from localhost, by a user with the
 # replication privilege.
-#local   replication     all                                     trust
-#host    replication     all             127.0.0.1/32            trust
-#host    replication     all             ::1/128                 trust
-
-# TYPE  DATABASE    USER     ADDRESS       METHOD
-local   postgres    postgres               trust
-host    postgres    postgres 127.0.0.1/32  trust
-host    db_flyspray flyspray 127.0.0.1/32  md5
-host    all         all      127.0.0.1/32  scram-sha-256
-host    all         all      0.0.0.0/0     reject
+local   replication     postgres                                 scram-sha-256
+host    replication     postgres         127.0.0.1/32            scram-sha-256
+host    replication     postgres         ::1/128                 scram-sha-256
diff --git a/tools/conf/srv/pgsql/data/postgresql.conf b/tools/conf/srv/pgsql/data/postgresql.conf
index e25ab49..4497df9 100644
--- a/tools/conf/srv/pgsql/data/postgresql.conf
+++ b/tools/conf/srv/pgsql/data/postgresql.conf
@@ -73,7 +73,7 @@ max_connections = 100			# (change requires restart)
 #bonjour_name = ''			# defaults to the computer name
 					# (change requires restart)
 
-# - TCP Keepalives -
+# - TCP settings -
 # see "man 7 tcp" for details
 
 #tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
@@ -82,12 +82,14 @@ max_connections = 100			# (change requires restart)
 					# 0 selects the system default
 #tcp_keepalives_count = 0		# TCP_KEEPCNT;
 					# 0 selects the system default
+#tcp_user_timeout = 0			# TCP_USER_TIMEOUT, in milliseconds;
+					# 0 selects the system default
 
 # - Authentication -
 
 #authentication_timeout = 1min		# 1s-600s
 #password_encryption = md5		# md5 or scram-sha-256
-password_encryption = scram-sha-256	# md5 or scram-sha-256
+password_encryption = scram-sha-256     # md5 or scram-sha-256
 #db_user_namespace = off
 
 # GSSAPI using Kerberos
@@ -107,6 +109,8 @@ ssl_key_file = '/etc/ssl/keys/pg.key'
 #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
 #ssl_prefer_server_ciphers = on
 #ssl_ecdh_curve = 'prime256v1'
+#ssl_min_protocol_version = 'TLSv1'
+#ssl_max_protocol_version = ''
 #ssl_dh_params_file = ''
 #ssl_passphrase_command = ''
 #ssl_passphrase_command_supports_reload = off
@@ -131,13 +135,18 @@ shared_buffers = 128MB			# min 128kB
 #maintenance_work_mem = 64MB		# min 1MB
 #autovacuum_work_mem = -1		# min 1MB, or -1 to use maintenance_work_mem
 #max_stack_depth = 2MB			# min 100kB
+#shared_memory_type = mmap		# the default is the first option
+					# supported by the operating system:
+					#   mmap
+					#   sysv
+					#   windows
+					# (change requires restart)
 dynamic_shared_memory_type = posix	# the default is the first option
 					# supported by the operating system:
 					#   posix
 					#   sysv
 					#   windows
 					#   mmap
-					# use none to disable dynamic shared memory
 					# (change requires restart)
 
 # - Disk -
@@ -152,7 +161,7 @@ dynamic_shared_memory_type = posix	# the default is the first option
 
 # - Cost-Based Vacuum Delay -
 
-#vacuum_cost_delay = 0			# 0-100 milliseconds
+#vacuum_cost_delay = 0			# 0-100 milliseconds (0 disables)
 #vacuum_cost_page_hit = 1		# 0-10000 credits
 #vacuum_cost_page_miss = 10		# 0-10000 credits
 #vacuum_cost_page_dirty = 20		# 0-10000 credits
@@ -203,6 +212,8 @@ dynamic_shared_memory_type = posix	# the default is the first option
 #wal_compression = off			# enable compression of full-page writes
 #wal_log_hints = off			# also do full page writes of non-critical updates
 					# (change requires restart)
+#wal_init_zero = on			# zero-fill new WAL files
+#wal_recycle = on			# recycle WAL files
 #wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
 					# (change requires restart)
 #wal_writer_delay = 200ms		# 1-10000 milliseconds
@@ -231,6 +242,42 @@ min_wal_size = 80MB
 #archive_timeout = 0		# force a logfile segment switch after this
 				# number of seconds; 0 disables
 
+# - Archive Recovery -
+
+# These are only used in recovery mode.
+
+#restore_command = ''		# command to use to restore an archived logfile segment
+				# placeholders: %p = path of file to restore
+				#               %f = file name only
+				# e.g. 'cp /mnt/server/archivedir/%f %p'
+				# (change requires restart)
+#archive_cleanup_command = ''	# command to execute at every restartpoint
+#recovery_end_command = ''	# command to execute at completion of recovery
+
+# - Recovery Target -
+
+# Set these only when performing a targeted recovery.
+
+#recovery_target = ''		# 'immediate' to end recovery as soon as a
+                                # consistent state is reached
+				# (change requires restart)
+#recovery_target_name = ''	# the named restore point to which recovery will proceed
+				# (change requires restart)
+#recovery_target_time = ''	# the time stamp up to which recovery will proceed
+				# (change requires restart)
+#recovery_target_xid = ''	# the transaction ID up to which recovery will proceed
+				# (change requires restart)
+#recovery_target_lsn = ''	# the WAL LSN up to which recovery will proceed
+				# (change requires restart)
+#recovery_target_inclusive = on # Specifies whether to stop:
+				# just after the specified recovery target (on)
+				# just before the recovery target (off)
+				# (change requires restart)
+#recovery_target_timeline = 'latest'	# 'current', 'latest', or timeline ID
+				# (change requires restart)
+#recovery_target_action = 'pause'	# 'pause', 'promote', 'shutdown'
+				# (change requires restart)
+
 
 #------------------------------------------------------------------------------
 # REPLICATION
@@ -264,6 +311,11 @@ min_wal_size = 80MB
 
 # These settings are ignored on a master server.
 
+#primary_conninfo = ''			# connection string to sending server
+					# (change requires restart)
+#primary_slot_name = ''			# replication slot on sending server
+					# (change requires restart)
+#promote_trigger_file = ''		# file name whose presence ends recovery
 #hot_standby = on			# "off" disallows queries during recovery
 					# (change requires restart)
 #max_standby_archive_delay = 30s	# max delay before canceling queries
@@ -281,6 +333,7 @@ min_wal_size = 80MB
 					# in milliseconds; 0 disables
 #wal_retrieve_retry_interval = 5s	# time to wait before retrying to
 					# retrieve WAL after a failed attempt
+#recovery_min_apply_delay = 0		# minimum delay for applying changes during recovery
 
 # - Subscribers -
 
@@ -356,7 +409,10 @@ min_wal_size = 80MB
 #join_collapse_limit = 8		# 1 disables collapsing of explicit
 					# JOIN clauses
 #force_parallel_mode = off
-#jit = off				# allow JIT compilation
+#jit = on				# allow JIT compilation
+jit = off				# allow JIT compilation
+#plan_cache_mode = auto			# auto, force_generic_plan or
+					# force_custom_plan
 
 
 #------------------------------------------------------------------------------
@@ -365,9 +421,8 @@ min_wal_size = 80MB
 
 # - Where to Log -
 
-#log_destination = 'stderr'		# Valid values are combinations of
-#log_destination = 'stderr,syslog'      # Multiple are valide
-log_destination = 'syslog'
+#log_destination = 'stderr'
+#log_destination = 'syslog'		# Valid values are combinations of
 					# stderr, csvlog, syslog, and eventlog,
 					# depending on platform.  csvlog
 					# requires logging_collector to be on.
@@ -400,7 +455,6 @@ log_destination = 'syslog'
 					# 0 disables.
 
 # These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
 syslog_facility = 'LOCAL0'
 syslog_ident = 'postgres'
 #syslog_sequence_numbers = on
@@ -412,17 +466,6 @@ syslog_ident = 'postgres'
 
 # - When to Log -
 
-#client_min_messages = notice		# values in order of decreasing detail:
-					#   debug5
-					#   debug4
-					#   debug3
-					#   debug2
-					#   debug1
-					#   log
-					#   notice
-					#   warning
-					#   error
-
 #log_min_messages = warning		# values in order of decreasing detail:
 					#   debug5
 					#   debug4
@@ -456,6 +499,9 @@ syslog_ident = 'postgres'
 					# statements running at least this number
 					# of milliseconds
 
+#log_transaction_sample_rate = 0.0	# Fraction of transactions whose statements
+					# are logged regardless of their duration. 1.0 logs all
+					# statements from all transactions, 0.0 never logs.
 
 # - What to Log -
 
@@ -464,12 +510,15 @@ syslog_ident = 'postgres'
 #debug_print_plan = off
 #debug_pretty_print = on
 #log_checkpoints = off
+#log_connections = off
 log_connections = on
+#log_disconnections = off
 log_disconnections = on
-log_duration = on
+#log_duration = off
 #log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
 log_hostname = on
-#log_line_prefix = '%m [%p] '		# special values:
+log_line_prefix = 'd=$d u=% %m [%p] '	# special values:
 					#   %a = application name
 					#   %u = user name
 					#   %d = database name
@@ -492,11 +541,12 @@ log_hostname = on
 					# e.g. '<%u%%%d> '
 #log_lock_waits = off			# log lock waits >= deadlock_timeout
 #log_statement = 'none'			# none, ddl, mod, all
+log_statement = 'mod'			# none, ddl, mod, all
 #log_replication_commands = off
 #log_temp_files = -1			# log temporary files equal or larger
 					# than the specified size in kilobytes;
 					# -1 disables, 0 logs all temp files
-log_timezone = 'Portugal'
+log_timezone = 'Europe/Lisbon'
 
 #------------------------------------------------------------------------------
 # PROCESS TITLE
@@ -553,7 +603,7 @@ log_timezone = 'Portugal'
 #autovacuum_multixact_freeze_max_age = 400000000	# maximum multixact age
 					# before forced vacuum
 					# (change requires restart)
-#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+#autovacuum_vacuum_cost_delay = 2ms	# default vacuum cost delay for
 					# autovacuum, in milliseconds;
 					# -1 means use vacuum_cost_delay
 #autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
@@ -567,11 +617,22 @@ log_timezone = 'Portugal'
 
 # - Statement Behavior -
 
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
 #search_path = '"$user", public'	# schema names
 #row_security = on
 #default_tablespace = ''		# a tablespace name, '' uses the default
 #temp_tablespaces = ''			# a list of tablespace names, '' uses
 					# only default tablespace
+#default_table_access_method = 'heap'
 #check_function_bodies = on
 #default_transaction_isolation = 'read committed'
 #default_transaction_read_only = off
@@ -597,7 +658,7 @@ log_timezone = 'Portugal'
 
 datestyle = 'iso, mdy'
 #intervalstyle = 'postgres'
-timezone = 'Portugal'
+timezone = 'Europe/Lisbon'
 #timezone_abbreviations = 'Default'     # Select the set of available time zone
 					# abbreviations.  Currently, there are
 					#   Default
@@ -605,7 +666,8 @@ timezone = 'Portugal'
 					#   India
 					# You can create your own file in
 					# share/timezonesets/.
-#extra_float_digits = 0			# min -15, max 3
+#extra_float_digits = 1			# min -15, max 3; any value >0 actually
+					# selects precise output mode
 #client_encoding = sql_ascii		# actually, defaults to database
 					# encoding
 
@@ -654,7 +716,6 @@ default_text_search_config = 'pg_catalog.english'
 
 #array_nulls = on
 #backslash_quote = safe_encoding	# on, off, or safe_encoding
-#default_with_oids = off
 #escape_string_warning = on
 #lo_compat_privileges = off
 #operator_precedence_warning = off
@@ -673,6 +734,9 @@ default_text_search_config = 'pg_catalog.english'
 
 #exit_on_error = off			# terminate session on any error?
 #restart_after_crash = on		# reinitialize after backend crash?
+#data_sync_retry = off			# retry or panic on failure to fsync
+					# data?
+					# (change requires restart)
 
 
 #------------------------------------------------------------------------------
@@ -680,12 +744,13 @@ default_text_search_config = 'pg_catalog.english'
 #------------------------------------------------------------------------------
 
 # These options allow settings to be loaded from files other than the
-# default postgresql.conf.
+# default postgresql.conf.  Note that these are directives, not variable
+# assignments, so they can usefully be given more than once.
 
-#include_dir = 'conf.d'			# include files ending in '.conf' from
-					# directory 'conf.d'
-#include_if_exists = 'exists.conf'	# include file only if it exists
-#include = 'special.conf'		# include file
+#include_dir = '...'			# include files ending in '.conf' from
+					# a directory, e.g., 'conf.d'
+#include_if_exists = '...'		# include file only if it exists
+#include = '...'			# include file
 
 
 #------------------------------------------------------------------------------