moved tool config from core

12 files changed, 592 insertions, 0 deletions

diff --git a/tools/conf/etc/skel/.gnupg/gpg.conf b/tools/conf/etc/skel/.gnupg/gpg.conf
new file mode 100644
index 0000000..20eed65
--- /dev/null
+++ b/tools/conf/etc/skel/.gnupg/gpg.conf
@@ -0,0 +1,141 @@
+# These first three lines are not copied to the gpg.conf file in
+# the users home directory.
+# $Id$
+# Options for GnuPG
+# Copyright 1998-2003, 2010 Free Software Foundation, Inc.
+# Copyright 1998-2003, 2010 Werner Koch
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Unless you specify which option file to use (with the command line
+# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf
+# by default.
+#
+# An options file can contain any long options which are available in
+# GnuPG. If the first non white space character of a line is a '#',
+# this line is ignored.  Empty lines are also ignored.
+#
+# See the gpg man page for a list of options.
+
+
+# If you have more than 1 secret key in your keyring, you may want to
+# uncomment the following option and set your preferred keyid.
+
+#default-key 621CC013
+
+
+# If you do not pass a recipient to gpg, it will ask for one.  Using
+# this option you can encrypt to a default key.  Key validation will
+# not be done in this case.  The second form uses the default key as
+# default recipient.
+
+#default-recipient some-user-id
+#default-recipient-self
+
+
+# Group names may be defined like this:
+#   group mynames = paige 0x12345678 joe patti
+#
+# Any time "mynames" is a recipient (-r or --recipient), it will be
+# expanded to the names "paige", "joe", and "patti", and the key ID
+# "0x12345678".  Note there is only one level of expansion - you
+# cannot make an group that points to another group.  Note also that
+# if there are spaces in the recipient name, this will appear as two
+# recipients.  In these cases it is better to use the key ID.
+
+#group mynames = paige 0x12345678 joe patti
+
+
+# GnuPG can automatically locate and retrieve keys as needed using
+# this option.  This happens when encrypting to an email address (in
+# the "user@@example.com" form) and there are no keys matching
+# "user@example.com" in the local keyring.  This option takes any
+# number mechanisms which are tried in the given order.  The default
+# is "--auto-key-locate local" to search for keys only in the local
+# key database.  Uncomment the next line to locate a missing key using
+# two DNS based mechanisms.
+
+#auto-key-locate local,pka,dane
+
+
+# Common options for keyserver functions:
+# (Note that the --keyserver option has been moved to dirmngr.conf)
+#
+# include-disabled = when searching, include keys marked as "disabled"
+#                    on the keyserver (not all keyservers support this).
+#
+# no-include-revoked = when searching, do not include keys marked as
+#                      "revoked" on the keyserver.
+#
+# verbose = show more information as the keys are fetched.
+#           Can be used more than once to increase the amount
+#           of information shown.
+#
+# auto-key-retrieve = automatically fetch keys as needed from the keyserver
+#                     when verifying signatures or when importing keys that
+#                     have been revoked by a revocation key that is not
+#                     present on the keyring.
+#
+# no-include-attributes = do not include attribute IDs (aka "photo IDs")
+#                         when sending keys to the keyserver.
+
+keyserver-options auto-key-retrieve
+#keyserver wwwkeys.pgp.net
+#keyserver search.keyserver.net
+keyserver pgp.mit.edu
+
+# Uncomment this line to display photo user IDs in key listings and
+# when a signature from a key with a photo is verified.
+
+#show-photos
+
+
+# Use this program to display photo user IDs
+#
+# %i is expanded to a temporary file that contains the photo.
+# %I is the same as %i, but the file isn't deleted afterwards by GnuPG.
+# %k is expanded to the key ID of the key.
+# %K is expanded to the long OpenPGP key ID of the key.
+# %t is expanded to the extension of the image (e.g. "jpg").
+# %T is expanded to the MIME type of the image (e.g. "image/jpeg").
+# %f is expanded to the fingerprint of the key.
+# %% is %, of course.
+#
+# If %i or %I are not present, then the photo is supplied to the
+# viewer on standard input.  If your platform supports it, standard
+# input is the best way to do this as it avoids the time and effort in
+# generating and then cleaning up a secure temp file.
+#
+# The default program is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin"
+# On Mac OS X and Windows, the default is to use your regular JPEG image
+# viewer.
+#
+# Some other viewers:
+# photo-viewer "qiv %i"
+# photo-viewer "ee %i"
+# photo-viewer "display -title 'KeyID 0x%k'"
+#
+# This one saves a copy of the photo ID in your home directory:
+# photo-viewer "cat > ~/photoid-for-key-%k.%t"
+#
+# Use your MIME handler to view photos:
+# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG"
+
+
+# Because some mailers change lines starting with "From " to ">From "
+# it is good to handle such lines in a special way when creating
+# cleartext signatures; all other PGP versions do it this way too.
+# To enable full OpenPGP compliance you may want to use this option.
+
+#no-escape-from-lines
+
+
+# Uncomment the following option to get rid of the copyright notice
+
+#no-greeting
diff --git a/tools/conf/etc/skel/.mutt/external b/tools/conf/etc/skel/.mutt/external
new file mode 100644
index 0000000..8ade1b1
--- /dev/null
+++ b/tools/conf/etc/skel/.mutt/external
@@ -0,0 +1,27 @@
+color status blue default
+
+unset sendmail
+
+set folder="~/.mailext"
+set mbox_type=Maildir
+set spoolfile="~/.mailext"
+set keep_flagged=yes            # esc-f to mark messages in spool, and
+
+set mbox="~/.mailext"
+set postponed="+.Drafts"
+set record="+.Sent"
+
+set use_from=yes
+set ssl_starttls=yes
+set ssl_force_tls = yes
+
+set realname='User Name'
+set from=mail@external.org
+
+set pop_user="mail@external.org"
+set pop_pass="password"
+set pop_delete=yes
+set pop_host="pops://$pop_user:$pop_pass@pop.external.org:995"
+
+set smtp_url="smtps://$pop_user:$pop_pass@smtp.external.org/"
+
diff --git a/tools/conf/etc/skel/.mutt/gpg.rc b/tools/conf/etc/skel/.mutt/gpg.rc
new file mode 100644
index 0000000..2ef0ae2
--- /dev/null
+++ b/tools/conf/etc/skel/.mutt/gpg.rc
@@ -0,0 +1,88 @@
+# -*-muttrc-*-
+#
+# Command formats for gpg.
+# 
+# This version uses gpg-2comp from 
+#   http://70t.de/download/gpg-2comp.tar.gz
+#
+# $Id$
+#
+# %p    The empty string when no passphrase is needed,
+#       the string "PGPPASSFD=0" if one is needed.
+#
+#       This is mostly used in conditional % sequences.
+#
+# %f    Most PGP commands operate on a single file or a file
+#       containing a message.  %f expands to this file's name.
+#
+# %s    When verifying signatures, there is another temporary file
+#       containing the detached signature.  %s expands to this
+#       file's name.
+#
+# %a    In "signing" contexts, this expands to the value of the
+#       configuration variable $pgp_sign_as.  You probably need to
+#       use this within a conditional % sequence.
+#
+# %r    In many contexts, mutt passes key IDs to pgp.  %r expands to
+#       a list of key IDs.
+
+# Note that we explicitly set the comment armor header since GnuPG, when used
+# in some localiaztion environments, generates 8bit data in that header, thereby
+# breaking PGP/MIME.
+
+# decode application/pgp
+set pgp_decode_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
+
+# verify a pgp/mime signature
+set pgp_verify_command="gpg --status-fd=2 --no-verbose --quiet --batch --output - --verify %s %f"
+
+# decrypt a pgp/mime attachment
+set pgp_decrypt_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
+
+# create a pgp/mime signed attachment
+# set pgp_sign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
+set pgp_sign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
+
+# create a application/pgp signed (old-style) message
+# set pgp_clearsign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
+set pgp_clearsign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
+
+# create a pgp/mime encrypted attachment
+# set pgp_encrypt_only_command="pgpewrap gpg-2comp -v --batch --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
+set pgp_encrypt_only_command="pgpewrap gpg --batch --quiet --no-verbose --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
+
+# create a pgp/mime encrypted and signed attachment
+# set pgp_encrypt_sign_command="pgpewrap gpg-2comp %?p?--passphrase-fd 0? -v --batch --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
+set pgp_encrypt_sign_command="pgpewrap gpg %?p?--passphrase-fd 0? --batch --quiet --no-verbose --textmode --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
+
+# import a key into the public key ring
+set pgp_import_command="gpg --no-verbose --import %f"
+
+# export a key from the public key ring
+set pgp_export_command="gpg --no-verbose --export --armor %r"
+
+# verify a key
+set pgp_verify_key_command="gpg --verbose --batch --fingerprint --check-sigs %r"
+
+# read in the public key ring
+set pgp_list_pubring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-keys %r"
+
+# read in the secret key ring
+set pgp_list_secring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-secret-keys %r"
+
+# fetch keys
+# set pgp_getkeys_command="pkspxycwrap %r"
+
+# pattern for good signature - may need to be adapted to locale!
+
+# set pgp_good_sign="^gpgv?: Good signature from "
+
+# OK, here's a version which uses gnupg's message catalog:
+# set pgp_good_sign="`gettext -d gnupg -s 'Good signature from "' | tr -d '"'`"
+
+# This version uses --status-fd messages
+set pgp_good_sign="^\\[GNUPG:\\] GOODSIG"
+
+# pattern to verify a decryption occurred
+set pgp_decryption_okay="^\\[GNUPG:\\] DECRYPTION_OKAY"
+
diff --git a/tools/conf/etc/skel/.mutt/mail_alias b/tools/conf/etc/skel/.mutt/mail_alias
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/conf/etc/skel/.mutt/mail_alias
diff --git a/tools/conf/etc/skel/.mutt/muttrc b/tools/conf/etc/skel/.mutt/muttrc
new file mode 100644
index 0000000..a56757e
--- /dev/null
+++ b/tools/conf/etc/skel/.mutt/muttrc
@@ -0,0 +1,65 @@
+set config_charset="utf-8"
+# set locale="de_CH"
+set charset="utf-8"
+set send_charset="utf-8"
+set editor="vim"
+set visual=vim
+set auto_tag
+set sort=threads
+
+set sort_browser=reverse-date
+set sort_aux=reverse-last-date-received
+set duplicate_threads=yes
+
+source ~/.mutt/gpg.rc
+
+set pgp_autosign=yes
+set pgp_sign_as=0x1D327CA1
+set pgp_replyencrypt=yes
+set pgp_timeout=1800
+
+# automatically sign all outgoing messages
+set crypt_autosign
+
+# sign only replies to signed messages
+set crypt_replysign
+
+# automatically encrypt outgoing messages
+#set crypt_autoencrypt=yes
+
+# encrypt only replies to signed messages
+set crypt_replyencrypt=yes
+
+# encrypt and sign replies to encrypted messages
+set crypt_replysignencrypted=yes
+
+# automatically verify the sign of a message when opened
+set crypt_verify_sig=yes
+
+source "~/.mutt/mail_alias"
+set alias_file=~/.mutt/mail_alias
+
+# Header
+set header_cache =~/.mutt/cache/headers
+set message_cachedir =~/.mutt/cache/bodies
+set certificate_file =~/.mutt/certificates
+
+set timeout=10    # mutt 'presses' (like) a key for you 
+                  #(while you're idle) each x sec to trigger 
+                  #the thing below
+set mail_check=5  # mutt checks for new mails on every keystroke
+                  # but not more often then once in 5 seconds
+set beep_new      # beep on new messages in the mailboxes
+
+## Local system account
+folder-hook 'Mail' 'source ~/.mutt/system'
+
+## Remote account
+folder-hook 'MailExt' 'source ~/.mutt/external'
+
+## Default account
+source "~/.mutt/system"
+
+## Shortcuts
+macro index,pager <f2> '<sync-mailbox><enter-command>source ~/.mutt/system<enter><change-folder>!<enter>'
+macro index,pager <f3> '<sync-mailbox><enter-command>source ~/.mutt/external<enter><change-folder>!<enter>'
diff --git a/tools/conf/etc/skel/.mutt/system b/tools/conf/etc/skel/.mutt/system
new file mode 100644
index 0000000..ae23778
--- /dev/null
+++ b/tools/conf/etc/skel/.mutt/system
@@ -0,0 +1,25 @@
+color status green default
+
+set folder="~/.mail"
+set mbox_type=Maildir
+set spoolfile=/var/spool/mail/username
+set keep_flagged=yes
+
+set mbox="~/.mail"           # ~/.mailext/read_inbox
+set postponed="+.Drafts"
+set record="+.Sent"
+
+set use_from=yes
+
+set sendmail=/usr/sbin/exim
+set ssl_starttls=no
+set ssl_force_tls=no
+
+unset pop_user
+unset pop_pass
+unset pop_delete
+unset pop_host
+unset smtp_url
+
+set realname='username'
+set from=username@localhost
diff --git a/tools/conf/etc/skel/.vim/backup/.gitignore b/tools/conf/etc/skel/.vim/backup/.gitignore
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/conf/etc/skel/.vim/backup/.gitignore
diff --git a/tools/conf/etc/skel/.vim/colors/wombat256mod.vim b/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
new file mode 100644
index 0000000..1137eb8
--- /dev/null
+++ b/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
@@ -0,0 +1,96 @@
+" Vim color file
+" Original Maintainer:  Lars H. Nielsen (dengmao@gmail.com)
+" Last Change:  2010-07-23
+"
+" Modified version of wombat for 256-color terminals by
+"   David Liang (bmdavll@gmail.com)
+" based on version by
+"   Danila Bespalov (danila.bespalov@gmail.com)
+
+set background=dark
+
+if version > 580
+	hi clear
+	if exists("syntax_on")
+		syntax reset
+	endif
+endif
+
+let colors_name = "wombat256mod"
+
+
+" General colors
+hi Normal		ctermfg=252		ctermbg=234		cterm=none		guifg=#e3e0d7	guibg=#242424	gui=none
+hi Cursor		ctermfg=234		ctermbg=228		cterm=none		guifg=#242424	guibg=#eae788	gui=none
+hi Visual		ctermfg=251		ctermbg=239		cterm=none		guifg=#c3c6ca	guibg=#554d4b	gui=none
+hi VisualNOS	ctermfg=251		ctermbg=236		cterm=none		guifg=#c3c6ca	guibg=#303030	gui=none
+hi Search		ctermfg=177		ctermbg=241		cterm=none		guifg=#d787ff	guibg=#636066	gui=none
+hi Folded		ctermfg=103		ctermbg=237		cterm=none		guifg=#a0a8b0	guibg=#3a4046	gui=none
+hi Title		ctermfg=230						cterm=bold		guifg=#ffffd7					gui=bold
+hi StatusLine	ctermfg=230		ctermbg=238		cterm=none		guifg=#ffffd7	guibg=#444444	gui=italic
+hi VertSplit	ctermfg=238		ctermbg=238		cterm=none		guifg=#444444	guibg=#444444	gui=none
+hi StatusLineNC	ctermfg=241		ctermbg=238		cterm=none		guifg=#857b6f	guibg=#444444	gui=none
+hi LineNr		ctermfg=241		ctermbg=232		cterm=none		guifg=#857b6f	guibg=#080808	gui=none
+hi SpecialKey	ctermfg=241		ctermbg=235		cterm=none		guifg=#626262	guibg=#2b2b2b	gui=none
+hi WarningMsg	ctermfg=203										guifg=#ff5f55
+hi ErrorMsg		ctermfg=196		ctermbg=236		cterm=bold		guifg=#ff2026	guibg=#3a3a3a	gui=bold
+
+" Vim >= 7.0 specific colors
+if version >= 700
+hi CursorLine					ctermbg=236		cterm=none						guibg=#32322f
+hi MatchParen	ctermfg=228		ctermbg=101		cterm=bold		guifg=#eae788	guibg=#857b6f	gui=bold
+hi Pmenu		ctermfg=230		ctermbg=238						guifg=#ffffd7	guibg=#444444
+hi PmenuSel		ctermfg=232		ctermbg=192						guifg=#080808	guibg=#cae982
+endif
+
+" Diff highlighting
+hi DiffAdd						ctermbg=17										guibg=#2a0d6a
+hi DiffDelete	ctermfg=234		ctermbg=60		cterm=none		guifg=#242424	guibg=#3e3969	gui=none
+hi DiffText						ctermbg=53		cterm=none						guibg=#73186e	gui=none
+hi DiffChange					ctermbg=237										guibg=#382a37
+
+"hi CursorIM
+"hi Directory
+"hi IncSearch
+"hi Menu
+"hi ModeMsg
+"hi MoreMsg
+"hi PmenuSbar
+"hi PmenuThumb
+"hi Question
+"hi Scrollbar
+"hi SignColumn
+"hi SpellBad
+"hi SpellCap
+"hi SpellLocal
+"hi SpellRare
+"hi TabLine
+"hi TabLineFill
+"hi TabLineSel
+"hi Tooltip
+"hi User1
+"hi User9
+"hi WildMenu
+
+
+" Syntax highlighting
+hi Keyword		ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
+hi Statement	ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
+hi Constant		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
+hi Number		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
+hi PreProc		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
+hi Function		ctermfg=192		cterm=none		guifg=#cae982	gui=none
+hi Identifier	ctermfg=192		cterm=none		guifg=#cae982	gui=none
+hi Type			ctermfg=186		cterm=none		guifg=#d4d987	gui=none
+hi Special		ctermfg=229		cterm=none		guifg=#eadead	gui=none
+hi String		ctermfg=113		cterm=none		guifg=#95e454	gui=italic
+hi Comment		ctermfg=246		cterm=none		guifg=#9c998e	gui=italic
+hi Todo			ctermfg=101		cterm=none		guifg=#857b6f	gui=italic
+
+
+" Links
+hi! link FoldColumn		Folded
+hi! link CursorColumn	CursorLine
+hi! link NonText		LineNr
+
+" vim:set ts=4 sw=4 noet:
diff --git a/tools/conf/etc/skel/.vim/swap/.gitignore b/tools/conf/etc/skel/.vim/swap/.gitignore
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/conf/etc/skel/.vim/swap/.gitignore
diff --git a/tools/conf/etc/skel/.vim/undodir/.gitignore b/tools/conf/etc/skel/.vim/undodir/.gitignore
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/conf/etc/skel/.vim/undodir/.gitignore
diff --git a/tools/conf/etc/skel/.vim/views/.gitignore b/tools/conf/etc/skel/.vim/views/.gitignore
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/conf/etc/skel/.vim/views/.gitignore
diff --git a/tools/conf/etc/skel/.vimrc b/tools/conf/etc/skel/.vimrc
new file mode 100644
index 0000000..cf143fd
--- /dev/null
+++ b/tools/conf/etc/skel/.vimrc
@@ -0,0 +1,150 @@
+" An example for a vimrc file.
+"
+" Maintainer:	Bram Moolenaar <Bram@vim.org>
+" Last change:	2015 Mar 24
+"
+" To use it, copy it to
+"     for Unix and OS/2:  ~/.vimrc
+"	      for Amiga:  s:.vimrc
+"  for MS-DOS and Win32:  $VIM\_vimrc
+"	    for OpenVMS:  sys$login:.vimrc
+
+" When started as "evim", evim.vim will already have done these settings.
+if v:progname =~? "evim"
+  finish
+endif
+
+" Use Vim settings, rather than Vi settings (much better!).
+" This must be first, because it changes other options as a side effect.
+set nocompatible
+
+" allow backspacing over everything in insert mode
+set backspace=indent,eol,start
+
+if has("vms")
+  set nobackup		" do not keep a backup file, use versions instead
+else
+  set backup		" keep a backup file (restore to previous version)
+  set undofile		" keep an undo file (undo changes after closing)
+endif
+
+set history=50		" keep 50 lines of command line history
+set ruler		" show the cursor position all the time
+set showcmd		" display incomplete commands
+set incsearch		" do incremental searching
+
+" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
+" let &guioptions = substitute(&guioptions, "t", "", "g")
+
+" Don't use Ex mode, use Q for formatting
+map Q gq
+
+" CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
+" so that you can undo CTRL-U after inserting a line break.
+inoremap <C-U> <C-G>u<C-U>
+
+" In many terminal emulators the mouse works just fine, thus enable it.
+if has('mouse')
+  set mouse=a
+endif
+
+" Switch syntax highlighting on, when the terminal has colors
+" Also switch on highlighting the last used search pattern.
+if &t_Co > 2 || has("gui_running")
+  syntax on
+  set hlsearch
+  colorscheme wombat256mod
+endif
+
+" Only do this part when compiled with support for autocommands.
+if has("autocmd")
+
+  " Enable file type detection.
+  " Use the default filetype settings, so that mail gets 'tw' set to 72,
+  " 'cindent' is on in C files, etc.
+  " Also load indent files, to automatically do language-dependent indenting.
+  filetype plugin indent on
+
+  " Put these in an autocmd group, so that we can delete them easily.
+  augroup vimrcEx
+  au!
+
+  " For all text files set 'textwidth' to 78 characters.
+  autocmd FileType text setlocal textwidth=78
+
+  " When editing a file, always jump to the last known cursor position.
+  " Don't do it when the position is invalid or when inside an event handler
+  " (happens when dropping a file on gvim).
+  autocmd BufReadPost *
+    \ if line("'\"") >= 1 && line("'\"") <= line("$") |
+    \   exe "normal! g`\"" |
+    \ endif
+
+  augroup END
+
+else
+
+  set autoindent		" always set autoindenting on
+
+endif " has("autocmd")
+
+" Convenient command to see the difference between the current buffer and the
+" file it was loaded from, thus the changes you made.
+" Only define it when not defined already.
+if !exists(":DiffOrig")
+  command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
+		  \ | wincmd p | diffthis
+endif
+
+if has('langmap') && exists('+langnoremap')
+  " Prevent that the langmap option applies to characters that result from a
+  " mapping.  If unset (default), this may break plugins (but it's backward
+  " compatible).
+  set langnoremap
+endif
+
+map <F2> :tabnew
+map <F3> :tabprevious<CR>
+map <F4> :tabnext<CR>
+
+" Show Line Numbers
+set nu
+set complete=.,b,u,]
+set wildmode=longest,list:longest
+set completeopt=menu,preview
+
+" Directories
+set backupdir=~/.vim/backup
+set undodir=~/.vim/undodir
+set viewdir=~/.vim/views
+set directory=~/.vim/swap
+
+" Spell Check
+set spell spelllang=en_us
+
+" Strips whitespace
+nnoremap <leader>W :%s/\s\+$//<cr>:let @/=''<CR>
+
+" Whitespace fixes
+highlight ExtraWhitespace ctermbg=red guibg=red
+match ExtraWhitespace /\s\+$/
+autocmd BufWinEnter * match ExtraWhitespace /\s\+$/
+autocmd InsertEnter * match ExtraWhitespace /\s\+\%#\@<!$/
+autocmd InsertLeave * match ExtraWhitespace /\s\+$/
+autocmd BufWinLeave * call clearmatches()
+
+
+" For tab characters that appear 4-spaces-wide
+set tabstop=4
+" If you're using actual tab character in your source code you probably also 
+" want these settings (these are actually the defaults,set them defensively):
+set softtabstop=0 noexpandtab
+" Finally, if you want an indent to correspond to a single tab, you should also use:
+set shiftwidth=4
+" For indents that consist of 4 space characters but are entered with the tab key:
+set tabstop=8 softtabstop=0 expandtab shiftwidth=4 smarttab
+set list
+" set past gives problems with tabs
+" set paste
+
+