aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--core/exim.html223
-rw-r--r--core/index.html35
-rw-r--r--tools/index.html27
-rw-r--r--tools/tar.html (renamed from core/tar.html)0
-rw-r--r--tools/vim.html (renamed from core/vim.html)0
5 files changed, 254 insertions, 31 deletions
diff --git a/core/exim.html b/core/exim.html
new file mode 100644
index 0000000..bf31a00
--- /dev/null
+++ b/core/exim.html
@@ -0,0 +1,223 @@
+<!DOCTYPE html>
+<html dir="ltr" lang="en">
+ <head>
+ <meta charset='utf-8'>
+ <title>2.5. Exim</title>
+ </head>
+ <body>
+ <a href="index.html">Core OS Index</a>
+ <h1>2.5. Exim</h1>
+
+ <h2 id="conf">2.5.1. Exim Configuration</h2>
+
+ <p>Exim come with default configuration we will change to mach system settings
+ <a href="../conf/etc/exim/aliases">/etc/exim/exim.conf</a>.</p>
+
+ <h2 id="cert">2.5.2. Certificates</h2>
+
+ <p>Create private key;</p>
+
+ <pre>
+ $ sudo mkdir /etc/ssl/keys
+ </pre>
+
+ <pre>
+ $ sudo openssl req -x509 -newkey rsa:2048 -keyout /etc/ssl/keys/exim.key -out /etc/ssl/certs/exim.cert -days 9000 -nodes
+ Generating a 2048 bit RSA private key
+ ...........................................+++
+ ..............+++
+ writing new private key to '/etc/ssl/keys/exim.key'
+ -----
+ You are about to be asked to enter information that will be incorporated
+ into your certificate request.
+ What you are about to enter is what is called a Distinguished Name or a DN.
+ There are quite a few fields but you can leave some blank
+ For some fields there will be a default value,
+ If you enter '.', the field will be left blank.
+ -----
+ Country Name (2 letter code) [AU]:PT
+ State or Province Name (full name) [Some-State]:
+ Locality Name (eg, city) []:
+ Organization Name (eg, company) [Internet Widgits Pty Ltd]:
+ Organizational Unit Name (eg, section) []:
+ Common Name (e.g. server FQDN or YOUR name) []:c13.nark.biz.tm
+ Email Address []:c1admin@c13.nark.biz.tm
+ #
+ </pre>
+
+ <pre>
+ # chown mail:mail /etc/ssl/keys/exim.key
+ # chmod 644 /etc/ssl/keys/exim.key
+ # chmod 644 /etc/ssl/certs/exim.cert
+ </pre>
+
+ <h2 id="alias">2.5.3. Aliases</h2>
+
+ <p>Exim come with default aliases we will change to mach system settings
+ <a href="../conf/etc/exim/aliases">/etc/exim/aliases;</a></p>
+
+ <pre>
+ # Default aliases file, installed by Exim. This file contains no real aliases.
+ # You should edit it to taste.
+
+ # The following alias is required by the mail RFCs 2821 and 2822.
+ # Set it to the address of a HUMAN who deals with this system's mail problems.
+
+ postmaster: c1admin@localhost
+
+ # It is also common to set the following alias so that if anybody replies to a
+ # bounce message from this host, the reply goes to the postmaster.
+
+ mailer-daemon: postmaster
+
+ # You should also set up an alias for messages to root, because it is not
+ # usually a good idea to deliver mail as root.
+
+ root: postmaster
+
+ # It is a good idea to redirect any messages sent to system accounts so tha
+ # they don't just get ignored. Here are some common examples:
+
+ bin: root
+ daemon: root
+ ftp: root
+ nobody: root
+ operator: root
+ uucp: root
+
+ # You should check your /etc/passwd for any others.
+
+ # Other commonly enountered aliases are:
+ #
+ # abuse: the person dealing with network and mail abuse
+ # hostmaster: the person dealing with DNS problems
+ # webmaster: the person dealing with your web site
+
+ ####
+ </pre>
+
+ <h2 id="smarthost">2.5.4. Smarthost</h2>
+
+ <p>Tony Finch publish a nice
+ <a href="http://www-uxsup.csx.cam.ac.uk/~fanf2/hermes/conf/exim/etc/etc.cam/configure">configuration reference</a>.
+ </p>
+
+ <p>File /etc/exim/alias rewrite addresses when receiving,
+ return_path and headers_rewrite rewrite addresses in header
+ (envelop) while main rewrite apply rewriting to all.</p>
+
+ <p>Test sender rewriting;</p>
+
+ <pre>
+ # exim -brw bob@box
+ # exim -brw bob@remote.com
+ </pre>
+
+ <p>Test routing;</p>
+
+ <pre>
+ # exim -bt bob@box
+ # exim -bt bob@remote.com
+ </pre>
+
+ <h2 id="fetchmail">2.5. Fetchmail</h2>
+
+ <pre>
+ $ prt-get depinst fetchmail
+ </pre>
+
+ <pre>
+ $ sudo su
+ # mkdir /var/lib/fetchmail
+ # mkdir /var/run/fetchmail
+ # useradd -r fetchmail
+ # chown fetchmail /var/lib/fetchmail
+ # chown fetchmail /var/run/fetchmail
+ </pre>
+
+ <p>Create /etc/rc.d/fetchmail and add fetchmail to /etc/rc.conf;</p>
+
+ <pre>
+ #!/bin/sh
+ #
+ # /etc/rc.d/fetchmail: start/stop fetchmail daemon
+ #
+
+ SSD=/sbin/start-stop-daemon
+ PROG=/usr/bin/fetchmail
+ PID=/var/run/fetchmail/fetchmail.pid
+ IDS=/var/lib/fetchmail/.fetchids
+ PUID=45
+ PGID=100
+ OPTS="-f /etc/fetchmailrc -i $IDS --pidfile $PID --syslog -v"
+
+ case $1 in
+ start)
+ $SSD --chuid $PUID:$PGID --user $PUID --exec $PROG --start -- $OPTS
+ ;;
+ stop)
+ $SSD --stop --remove-pidfile --retry 10 --pidfile $PID
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ reload)
+ $SSD --stop --signal HUP --pidfile $PID
+ ;;
+ status)
+ $SSD --status --pidfile $PID
+ case $? in
+ 0) echo "$PROG is running with pid $(head -1 $PID)" ;;
+ 1) echo "$PROG is not running but the pid file $PID exists" ;;
+ 3) echo "$PROG is not running" ;;
+ 4) echo "Unable to determine the program status" ;;
+ esac
+ ;;
+ *)
+ echo "usage: $0 [start|stop|restart|reload|status]"
+ ;;
+ esac
+ # End of file
+ </pre>
+
+ <p>Create /etc/fetchmailrc;</p>
+
+ <pre>
+ # This file must be chmod 0600, owner fetchmail
+
+ set daemon 300 # Pool every 5 minutes
+ set syslog # log through syslog facility
+ set postmaster admin@box
+
+ set no bouncemail # avoid loss on 4xx errors
+ # on the other hand, 5xx errors get
+ # more dangerous...
+
+ ##########################################################################
+ # Hosts to pool
+ ##########################################################################
+
+ # Defaults ===============================================================
+ # Set antispam to -1, since it is far safer to use that together with
+ # no bouncemail
+ defaults:
+ timeout 300
+ antispam -1
+ batchlimit 100
+
+ poll pop.remote.com protocol POP3 user "drbob@remote.com" there with password "secretpass" is "bob@box" here
+ </pre>
+
+ <a href="index.html">Core OS Index</a>
+ <p>
+ This is part of the c9 Manual.
+ Copyright (C) 2016
+ Silvino Silva.
+ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+ for copying conditions.</p>
+
+
+
+ </body>
+</html>
diff --git a/core/index.html b/core/index.html
index 94e1f19..fce7170 100644
--- a/core/index.html
+++ b/core/index.html
@@ -101,37 +101,22 @@
<li><a href="tty-terminal.html">2.4. Terminals and shells</a>
<ul>
- <li><a href="dash.html">2.4.1. Dash</a>
- <li><a href="bash.html">2.4.2. Bash</a>
- <li><a href="tmux.html">2.4.3. Tmux</a>
+ <li><a href="dash.html">2.4.1. Dash</a></li>
+ <li><a href="bash.html">2.4.2. Bash</a></li>
+ <li><a href="tmux.html">2.4.3. Tmux</a></li>
</ul>
</li>
- </ul>
-
- <h2>3. System Tools</h2>
-
- <ul>
- <li><a href="tar.html">3.1. Tar</a>
+ <li><a href="exim.html">2.5. Exim</a>
<ul>
- <li><a href="tar.html#tarbkup">3.1.1. Create Backup</a></li>
- <li><a href="tar.html#tarview">3.1.2. View content of tar</a></li>
- <li><a href="tar.html#tarextract">3.1.3. Extract content from tar</a></li>
- <li><a href="tar.html#taradd">3.1.4. Add content to tar</a></li>
- <li><a href="tar.html#tarrm">3.1.5. Remove content from tar</a></li>
+ <li><a href="exim.html#conf">2.5.1. Exim Configuration</a></li>
+ <li><a href="exim.html#cert">2.5.2. Certificates</a></li>
+ <li><a href="exim.html#alias">2.5.3. Aliases</a></li>
+ <li><a href="exim.html#smarthost">2.5.4. Smarthost</a></li>
+ <li><a href="exim.html#fetchmail">2.5.5. Fetchmail</a></li>
</ul>
</li>
- <li><a href="vim.html">3.2. Vim</a>
- <ul>
- <li><a href="vim.html#vimrc">3.2.1. Vim RC</a></li>
- <li><a href="vim.html#color">3.2.2. Color schemes</a></li>
- <li><a href="vim.html#spacetab">3.2.3. Spaces and tabs</a></li>
- <li><a href="vim.html#block">3.2.4. Editing Files</a></li>
- <li><a href="vim.html#spellcheck">3.2.5. Spell check</a></li>
- <li><a href="vim.html#plugin">3.2.6. Plugins</a></li>
- </ul>
- </li>
- </ul>
+ </ul>
<p>
This is part of the c9-doc Manual.
Copyright (C) 2016
diff --git a/tools/index.html b/tools/index.html
index 182b9ad..b4f4d35 100644
--- a/tools/index.html
+++ b/tools/index.html
@@ -12,17 +12,32 @@
<a href="../index.html">Documentation Index</a>
- <h2>User Applications</h2>
+
+ <h2>System Tools</h2>
<ul>
+ <li><a href="tar.html">Tar</a>
+ <ul>
+ <li><a href="tar.html#tarbkup">Create Backup</a></li>
+ <li><a href="tar.html#tarview">View content of tar</a></li>
+ <li><a href="tar.html#tarextract">Extract content from tar</a></li>
+ <li><a href="tar.html#taradd">Add content to tar</a></li>
+ <li><a href="tar.html#tarrm">Remove content from tar</a></li>
+ </ul>
+ </li>
+ <li><a href="vim.html">Vim</a>
+ <ul>
+ <li><a href="vim.html#vimrc">Vim RC</a></li>
+ <li><a href="vim.html#color">Color schemes</a></li>
+ <li><a href="vim.html#spacetab">Spaces and tabs</a></li>
+ <li><a href="vim.html#block">Editing Files</a></li>
+ <li><a href="vim.html#spellcheck">Spell check</a></li>
+ <li><a href="vim.html#plugin">Plugins</a></li>
+ </ul>
+ </li>
<li><a href="mutt.html">Mutt</a></li>
<li><a href="lynx.html">Lynx</a></li>
<li><a href="irssi.html">Irssi</a></li>
- </ul>
-
- <h2>System Tools</h2>
-
- <ul>
<li><a href="wireless.html">Wireless</a></li>
<li><a href="nmap.html">Nmap</a></li>
<li><a href="tcpdump.html">Tcpdump</a></li>
diff --git a/core/tar.html b/tools/tar.html
index 876065a..876065a 100644
--- a/core/tar.html
+++ b/tools/tar.html
diff --git a/core/vim.html b/tools/vim.html
index e633670..e633670 100644
--- a/core/vim.html
+++ b/tools/vim.html