diff options
| -rw-r--r-- | dev/c/index.html | 87 | ||||
| -rw-r--r-- | dev/c/system.html | 159 | ||||
| -rw-r--r-- | dev/index.html | 1 |
3 files changed, 161 insertions, 86 deletions
diff --git a/dev/c/index.html b/dev/c/index.html index 684c7d2..1c3b478 100644 --- a/dev/c/index.html +++ b/dev/c/index.html @@ -7,92 +7,6 @@ <body> <a href="../index.html">Development Index</a> - <h1>System Development</h1> - - <p>System development requires debug kernel know how, - in this example will be used qemu and gdb. A simple init - program is created. Create init.S;</p> - - <pre> - .global _start - _start: - mov $1, %rax - mov $1, %rdi - mov $message, %rsi - mov $message_len, %rdx - syscall - jmp . - message: .ascii "FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR\n" - .equ message_len, . - message - </pre> - - <p>Assemble, link and create simple initial ram disk;</p> - - <pre> - mkdir d - as --64 -o init.o init.S # assemble - ld -o d/init init.o # link - cd d - find . | cpio -o -H newc | gzip > ../rootfs.cpio.gz - </pre> - - <p>Clean temporary directory;</p> - - <pre> - cd .. - rm -r d/ - </pre> - - <p>Can be used C to create init program;</p> - - <pre> - #include <stdio.h> - #include <unistd.h> - - int main() { - printf("FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR\n"); - sleep(0xFFFFFFFF); - return 0; - } - </pre> - - <pre> - $ gcc -static init.c -o init - </pre> - - <p>Test qemu, kernel and simple init program, you should see - "FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR";</p> - - <pre> - $ qemu-system-x86_64 -enable-kvm --kernel arch/x86_64/boot/bzImage \ - --initrd rootfs.cpio.gz - </pre> - - <p>If everything goes well you can start qemu without start CPU at - startup (-S) and with gdb server on TCP port 1234 (-s).</p> - - <pre> - $ qemu-system-x86_64 -enable-kvm --kernel arch/x86/boot/bzImage \ - --initrd rootfs.cpio.gz \ - -S -s - </pre> - - <p>On another terminal start gdb;</p> - - <pre> - gdb \ - -ex "add-auto-load-safe-path $(pwd)" \ - -ex "file vmlinux" \ - -ex 'set arch i386:x86-64:intel' \ - -ex 'target remote localhost:1234' \ - -ex 'break start_kernel' \ - -ex 'continue' \ - -ex 'disconnect' \ - -ex 'set arch i386:x86-64' \ - -ex 'target remote localhost:1234' - </pre> - - <h1>C & GDB</h1> <p><a href="http://blog.fourthbit.com/2013/06/18/creating-an-open-source-program-in-c-with-autotools-part-1-of-2/">C program with autotools</a> @@ -172,6 +86,7 @@ <pre> strace -c ./program </pre> + <a href="../index.html">Development Index</a> <p> This is part of the c9-doc Manual. diff --git a/dev/c/system.html b/dev/c/system.html new file mode 100644 index 0000000..65eede1 --- /dev/null +++ b/dev/c/system.html @@ -0,0 +1,159 @@ +<!DOCTYPE html> +<html dir="ltr" lang="en"> + <head> + <meta charset='utf-8'> + <title>System Development & GDB</title> + </head> + <body> + <a href="../index.html">Development Index</a> + + <h1>System Development</h1> + + <p>System development requires knowing how to debug + kernel know how, in this example will be used Qemu + and GDB. Qemu creates the virtual machine that kernel + will run on and GDB will connect to it to help us + understand how things tick.</p> + + <h2>Kernel Build</h2> + + <pre> + $ tar xf linux-4.9.48.tar.xz + $ cd linux-4.9.48 + </pre> + + <p>Default configuration disable some security + configurations that allow us to debug (random memory + layout).</p> + + <pre> + $ make x86_64_defconfig + </pre> + + <p>Enable CONFIG_DEBUG_INFO, CONFIG_DEBUG_INFO_DWARF4 + and CONFIG_GDB_SCRIPTS in the kernel;</p> + + <pre> + make x86_64_defconfig + cat <<EOF >.config-fragment + CONFIG_DEBUG_INFO=y + CONFIG_DEBUG_KERNEL=y + CONFIG_GDB_SCRIPTS=y + EOF + ./scripts/kconfig/merge_config.sh .config .config-fragment + </pre> + + <p>Check or change to your needs the configuration;</p> + <pre> + $ make nconfig + </pre> + + <p>Build Kernel and modules;</p> + + <pre> + $ make -j $(nproc) + </pre> + + <h2>Simple Init</h2> + + <p>Now that you have the kernel compiled you can + create a simple init program, this program is called + when kernel finish to load and setup its internals + and is ready to launch first process. + Init program should not exit or kernel will panic. + Create init.S;</p> + + <pre> + .global _start + _start: + mov $1, %rax + mov $1, %rdi + mov $message, %rsi + mov $message_len, %rdx + syscall + jmp . + message: .ascii "FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR\n" + .equ message_len, . - message + </pre> + + <p>Assemble, link and create simple initial ram disk;</p> + + <pre> + mkdir d + as --64 -o init.o init.S # assemble + ld -o d/init init.o # link + cd d + find . | cpio -o -H newc | gzip > ../rootfs.cpio.gz + </pre> + + <p>Clean temporary directory;</p> + + <pre> + cd .. + rm -r d/ + </pre> + + <p>Can be used C to create init program;</p> + + <pre> + #include <stdio.h> + #include <unistd.h> + + int main() { + printf("FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR\n"); + sleep(0xFFFFFFFF); + return 0; + } + </pre> + + <pre> + $ gcc -static init.c -o init + </pre> + + <h2>Start Debugging</h2> + + <p>Test qemu, kernel and simple init program, you + should see + "FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR FOOBAR";</p> + + <pre> + $ qemu-system-x86_64 -enable-kvm --kernel arch/x86_64/boot/bzImage \ + --initrd rootfs.cpio.gz + </pre> + + <p>If everything goes well you can start qemu without + starting the CPU (-S) and with gdb server on TCP port 1234 (-s).</p> + + <pre> + $ qemu-system-x86_64 -enable-kvm --kernel arch/x86/boot/bzImage \ + --initrd rootfs.cpio.gz \ + -S -s + </pre> + + <p>On another terminal start gdb;</p> + + <pre> + gdb \ + -ex "add-auto-load-safe-path $(pwd)" \ + -ex "file vmlinux" \ + -ex 'set arch i386:x86-64:intel' \ + -ex 'target remote localhost:1234' \ + -ex 'break start_kernel' \ + -ex 'continue' \ + -ex 'disconnect' \ + -ex 'set arch i386:x86-64' \ + -ex 'target remote localhost:1234' + </pre> + + + <a href="../index.html">Development Index</a> + <p> + This is part of the c9-doc Manual. + Copyright (C) 2016 + c9 team. + See the file <a href="../../fdl-1.3-standalone.html">Gnu Free Documentation License</a> + for copying conditions.</p> + + </body> + +</html> diff --git a/dev/index.html b/dev/index.html index cb238d7..e463f6f 100644 --- a/dev/index.html +++ b/dev/index.html @@ -45,6 +45,7 @@ <li><a href="">Control Flow</a></li> <li><a href="">Functions</a></li> <li><a href="">Input & Output</a></li> + <li><a href="c/system.html">System Development</a></li> </ul> <ul> |