aboutsummaryrefslogtreecommitdiffstats
path: root/core/conf
diff options
context:
space:
mode:
Diffstat (limited to 'core/conf')
-rw-r--r--core/conf/iptables/iptables-lan.sh143
-rw-r--r--core/conf/iptables/rules.v476
-rw-r--r--core/conf/sysctl.conf148
3 files changed, 217 insertions, 150 deletions
diff --git a/core/conf/iptables/iptables-lan.sh b/core/conf/iptables/iptables-lan.sh
index fae7345..58d92c3 100644
--- a/core/conf/iptables/iptables-lan.sh
+++ b/core/conf/iptables/iptables-lan.sh
@@ -26,8 +26,7 @@ NIC_NAME="enp8s0 wlp7s0"
# Logging options.
#------------------------------------------------------------------------------
-LOG="LOG --log-level debug --log-tcp-sequence --log-tcp-options"
-LOG="$LOG --log-ip-options"
+LOG="LOG --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options"
# Defaults for rate limiting
@@ -59,9 +58,9 @@ $MODPROBE ip_conntrack_irc
# Drop everything by default.
$IPTABLES -P INPUT DROP
$IPTABLES -P FORWARD DROP
-$IPTABLES -P OUTPUT ACCEPT
+$IPTABLES -P OUTPUT DROP
-# Set the nat/mangle/raw tables' chains to ACCEPT
+# Set the nat/mangle/raw tables' chains to DROP
$IPTABLES -t mangle -P PREROUTING ACCEPT
$IPTABLES -t mangle -P INPUT ACCEPT
@@ -89,53 +88,58 @@ $IPTABLES -t mangle -Z
# Block all IPv6 traffic
# If the ip6tables command is available, try to block all IPv6 traffic.
-if test -x $IP6TABLES; then
+#if test -x $IP6TABLES; then
# Set the default policies
# drop everything
-$IP6TABLES -P INPUT DROP 2>/dev/null
-$IP6TABLES -P FORWARD DROP 2>/dev/null
-$IP6TABLES -P OUTPUT DROP 2>/dev/null
-
-# The mangle table can pass everything
-$IP6TABLES -t mangle -P PREROUTING ACCEPT 2>/dev/null
-$IP6TABLES -t mangle -P INPUT ACCEPT 2>/dev/null
-$IP6TABLES -t mangle -P FORWARD ACCEPT 2>/dev/null
-$IP6TABLES -t mangle -P OUTPUT ACCEPT 2>/dev/null
-$IP6TABLES -t mangle -P POSTROUTING ACCEPT 2>/dev/null
+#$IP6TABLES -P INPUT DROP
+#$IP6TABLES -P FORWARD DROP
+#$IP6TABLES -P OUTPUT DROP
+#
+## The mangle table can pass everything
+#$IP6TABLES -t mangle -P PREROUTING ACCEPT
+#$IP6TABLES -t mangle -P INPUT ACCEPT
+#$IP6TABLES -t mangle -P FORWARD ACCEPT
+#$IP6TABLES -t mangle -P OUTPUT ACCEPT
+#$IP6TABLES -t mangle -P POSTROUTING ACCEPT
# Delete all rules.
-$IP6TABLES -F 2>/dev/null
-$IP6TABLES -t mangle -F 2>/dev/null
-
-# Delete all chains.
-$IP6TABLES -X 2>/dev/null
-$IP6TABLES -t mangle -X 2>/dev/null
-
-# Zero all packets and counters.
-$IP6TABLES -Z 2>/dev/null
-$IP6TABLES -t mangle -Z 2>/dev/null
-fi
+#$IP6TABLES -F 2>/dev/null
+#$IP6TABLES -t mangle -F 2>/dev/null
+#
+## Delete all chains.
+#$IP6TABLES -X 2>/dev/null
+#$IP6TABLES -t mangle -X 2>/dev/null
+#
+## Zero all packets and counters.
+#$IP6TABLES -Z 2>/dev/null
+#$IP6TABLES -t mangle -Z 2>/dev/null
+#fi
# Custom user-defined chains.
#------------------------------------------------------------------------------
# LOG packets, then ACCEPT.
$IPTABLES -N ACCEPTLOG
-$IPTABLES -A ACCEPTLOG -j $LOG $RLIMIT --log-prefix "ACCEPT "
+$IPTABLES -A ACCEPTLOG -j $LOG $RLIMIT --log-prefix "iptables: ACCEPT "
$IPTABLES -A ACCEPTLOG -j ACCEPT
# LOG packets, then DROP.
$IPTABLES -N DROPLOG
-$IPTABLES -A DROPLOG -j $LOG $RLIMIT --log-prefix "DROP "
+$IPTABLES -A DROPLOG -j $LOG $RLIMIT --log-prefix "iptables: DROP "
$IPTABLES -A DROPLOG -j DROP
# LOG packets, then REJECT.
# TCP packets are rejected with a TCP reset.
$IPTABLES -N REJECTLOG
-$IPTABLES -A REJECTLOG -j $LOG $RLIMIT --log-prefix "REJECT "
+$IPTABLES -A REJECTLOG -j $LOG $RLIMIT --log-prefix "iptables: REJECT "
$IPTABLES -A REJECTLOG -p tcp -j REJECT --reject-with tcp-reset
$IPTABLES -A REJECTLOG -j REJECT
+# Allow loopback interface to do anything.
+$IPTABLES -A INPUT -i lo -j ACCEPT
+$IPTABLES -A OUTPUT -o lo -j ACCEPT
+
+
# Only allows RELATED ICMP types
# (destination-unreachable, time-exceeded, and parameter-problem).
# TODO: Rate-limit this traffic?
@@ -185,10 +189,6 @@ $IPTABLES -A FORWARD -p icmp -j DROPLOG
# Selectively allow certain special types of traffic.
#------------------------------------------------------------------------------
-# Allow loopback interface to do anything.
-$IPTABLES -A INPUT -i lo -j ACCEPT
-$IPTABLES -A OUTPUT -o lo -j ACCEPT
-
# Allow incoming connections related to existing allowed connections.
$IPTABLES -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
@@ -199,7 +199,7 @@ $IPTABLES -A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
#------------------------------------------------------------------------------
# We don't care about Milkosoft, Drop SMB/CIFS/etc..
-# ^ person before me; my label = psychogreedyevilsoft
+# ^ greedyevilsoft
$IPTABLES -A INPUT -p tcp -m multiport --dports 135,137,138,139,445,1433,1434 -j DROP
$IPTABLES -A INPUT -p udp -m multiport --dports 135,137,138,139,445,1433,1434 -j DROP
@@ -234,12 +234,13 @@ $IPTABLES -A SYN_FLOOD -m limit --limit 2/s --limit-burst 6 -j RETURN
$IPTABLES -A SYN_FLOOD -j DROP
-$IPTABLES -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -m limit --limit 5/min --limit-burst 7 -j LOG --log-prefix "iptables: drop sync: " --log-level 7
-$IPTABLES -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP
-
-$IPTABLES -A INPUT -f -m limit --limit 5/min --limit-burst 7 -j LOG --log-prefix "iptables: drop frag: "
-$IPTABLES -A INPUT -f -j DROP
+#$IPTABLES -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -m limit --limit 30/min --limit-burst 7 -j DROPLOG --log-prefix "iptables: drop sync: " --log-level 7
+#$IPTABLES -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP
+$IPTABLES -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROPLOG
+#$IPTABLES -A INPUT -f -m limit --limit 5/min --limit-burst 7 -j LOG --log-prefix "iptables: drop frag: "
+#$IPTABLES -A INPUT -f -j DROP
+$IPTABLES -A INPUT -f -j DROPLOG
# TODO: ICQ, MSN, GTalk, Skype, Yahoo, etc...
@@ -247,22 +248,67 @@ $IPTABLES -A INPUT -f -j DROP
#------------------------------------------------------------------------------
# Allow incoming SSH requests.
-$IPTABLES -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT
+#$IPTABLES -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT
+
+# Allow incoming https server
+#$IPTABLES -A INPUT -p tcp -m tcp --dport 443 --sport $PHIGH -m state --state NEW,ESTABLISHED -j ACCEPT
+
+
+# Selectively allow certain outbound connections, block the rest.
+#------------------------------------------------------------------------------
+#
+
+# Allow ping
+$IPTABLES -A OUTPUT -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
+# Allow to ssh clients
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport 2222 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
+
+# Allow to dns
+$IPTABLES -A OUTPUT -p udp -m udp --sport $PHIGH --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow irc
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 6667 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to xmmp
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 5222 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
+# Allow to rsync server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 873 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to pop3s server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 995 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to smtps server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 465 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to ntp server
+$IPTABLES -A OUTPUT -p udp -m udp --sport $PHIGH --dport 123 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to ftp server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 20 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to https server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 443 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
+#$IPTABLES -A OUTPUT -p udp -m udp --sport $PHIGH --dport 443 -m state --state NEW,ESTABLISHED -j ACCEPT
+# Allow to http server
+$IPTABLES -A OUTPUT -p tcp -m tcp --sport $PHIGH --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
+
+# Selectively allow certain outbound server connections, block the rest.
+#------------------------------------------------------------------------------
+
+# Allow from https server
+#$IPTABLES -A OUTPUT -p tcp -m tcp --sport 443 --dport $PHIGH -m state --state ESTABLISHED -j ACCEPT
+
+# Allow from dns server
+#$IPTABLES -A OUTPUT -p udp -m udp --sport 53 --dport $PHIGH -m state --state ESTABLISHED -j ACCEPT
# Explicitly log and reject everything else.
#------------------------------------------------------------------------------
# Use REJECT instead of REJECTLOG if you don't need/want logging.
-$IPTABLES -A INPUT -j REJECTLOG
-$IPTABLES -A OUTPUT -j REJECTLOG
+$IPTABLES -A INPUT -j DROPLOG
+$IPTABLES -A OUTPUT -j DROPLOG
$IPTABLES -A FORWARD -j REJECTLOG
# Counter hits
-for i in $NIC_NAME
-do
- iptables -I INPUT -p tcp -m multiport --dports 22 -i $i -m state --state NEW -m recent --set
- iptables -I INPUT -p tcp -m multiport --dports 22 -i $i -m state --state NEW -m recent --update --seconds 50 --hitcount 3 -j DROP
-done
+#for i in $NIC_NAME
+#do
+# iptables -I INPUT -p tcp -m multiport --dports 22 -i $i -m state --state NEW -m recent --set
+# iptables -I INPUT -p tcp -m multiport --dports 22 -i $i -m state --state NEW -m recent --update --seconds 50 --hitcount 3 -j DROP
+#done
#------------------------------------------------------------------------------
# Testing the firewall.
@@ -273,5 +319,4 @@ done
# Exit gracefully.
#------------------------------------------------------------------------------
-
- exit 0
+exit 0
diff --git a/core/conf/iptables/rules.v4 b/core/conf/iptables/rules.v4
index 5a2ffe8..568455a 100644
--- a/core/conf/iptables/rules.v4
+++ b/core/conf/iptables/rules.v4
@@ -1,25 +1,25 @@
-# Generated by iptables-save v1.6.1 on Tue Feb 21 13:55:04 2017
+# Generated by iptables-save v1.6.1 on Sat Feb 25 18:34:17 2017
*security
-:INPUT ACCEPT [3624:2121853]
+:INPUT ACCEPT [4559:2307887]
:FORWARD ACCEPT [0:0]
-:OUTPUT ACCEPT [3590:999020]
+:OUTPUT ACCEPT [4459:962215]
COMMIT
-# Completed on Tue Feb 21 13:55:04 2017
-# Generated by iptables-save v1.6.1 on Tue Feb 21 13:55:04 2017
+# Completed on Sat Feb 25 18:34:17 2017
+# Generated by iptables-save v1.6.1 on Sat Feb 25 18:34:17 2017
*raw
-:PREROUTING ACCEPT [5432:2268406]
-:OUTPUT ACCEPT [3623:1011362]
+:PREROUTING ACCEPT [18446:3412851]
+:OUTPUT ACCEPT [4467:962535]
COMMIT
-# Completed on Tue Feb 21 13:55:04 2017
-# Generated by iptables-save v1.6.1 on Tue Feb 21 13:55:04 2017
+# Completed on Sat Feb 25 18:34:17 2017
+# Generated by iptables-save v1.6.1 on Sat Feb 25 18:34:17 2017
*nat
-:PREROUTING ACCEPT [1808:146553]
-:INPUT ACCEPT [0:0]
-:OUTPUT ACCEPT [322:28410]
-:POSTROUTING ACCEPT [289:16068]
+:PREROUTING ACCEPT [13936:1107904]
+:INPUT ACCEPT [49:2940]
+:OUTPUT ACCEPT [504:40037]
+:POSTROUTING ACCEPT [504:40037]
COMMIT
-# Completed on Tue Feb 21 13:55:04 2017
-# Generated by iptables-save v1.6.1 on Tue Feb 21 13:55:04 2017
+# Completed on Sat Feb 25 18:34:17 2017
+# Generated by iptables-save v1.6.1 on Sat Feb 25 18:34:17 2017
*mangle
:PREROUTING ACCEPT [0:0]
:INPUT ACCEPT [0:0]
@@ -27,21 +27,18 @@ COMMIT
:OUTPUT ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
COMMIT
-# Completed on Tue Feb 21 13:55:04 2017
-# Generated by iptables-save v1.6.1 on Tue Feb 21 13:55:04 2017
+# Completed on Sat Feb 25 18:34:17 2017
+# Generated by iptables-save v1.6.1 on Sat Feb 25 18:34:17 2017
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
-:OUTPUT ACCEPT [0:0]
+:OUTPUT DROP [0:0]
:ACCEPTLOG - [0:0]
:DROPLOG - [0:0]
:REJECTLOG - [0:0]
:RELATED_ICMP - [0:0]
:SYN_FLOOD - [0:0]
--A INPUT -i wlp7s0 -p tcp -m multiport --dports 22 -m state --state NEW -m recent --update --seconds 50 --hitcount 3 --name DEFAULT --mask 255.255.255.255 --rsource -j DROP
--A INPUT -i wlp7s0 -p tcp -m multiport --dports 22 -m state --state NEW -m recent --set --name DEFAULT --mask 255.255.255.255 --rsource
--A INPUT -i enp8s0 -p tcp -m multiport --dports 22 -m state --state NEW -m recent --update --seconds 50 --hitcount 3 --name DEFAULT --mask 255.255.255.255 --rsource -j DROP
--A INPUT -i enp8s0 -p tcp -m multiport --dports 22 -m state --state NEW -m recent --set --name DEFAULT --mask 255.255.255.255 --rsource
+-A INPUT -i lo -j ACCEPT
-A INPUT -p icmp -m limit --limit 1/sec --limit-burst 2 -j ACCEPT
-A INPUT -p icmp -m limit --limit 1/sec --limit-burst 2 -j LOG --log-prefix "PING-DROP:"
-A INPUT -p icmp -j DROP
@@ -50,7 +47,6 @@ COMMIT
-A INPUT -p icmp -m state --state RELATED -m limit --limit 3/sec --limit-burst 8 -j RELATED_ICMP
-A INPUT -p icmp -m icmp --icmp-type 8 -m limit --limit 3/sec --limit-burst 8 -j ACCEPT
-A INPUT -p icmp -j DROPLOG
--A INPUT -i lo -j ACCEPT
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p tcp -m multiport --dports 135,137,138,139,445,1433,1434 -j DROP
-A INPUT -p udp -m multiport --dports 135,137,138,139,445,1433,1434 -j DROP
@@ -68,31 +64,41 @@ COMMIT
-A INPUT -p tcp -m tcp --tcp-flags FIN,ACK FIN -j DROPLOG
-A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,ACK,URG -j DROPLOG
-A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -j SYN_FLOOD
--A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -m limit --limit 5/min --limit-burst 7 -j LOG --log-prefix "iptables: drop sync: " --log-level 7
--A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP
--A INPUT -f -m limit --limit 5/min --limit-burst 7 -j LOG --log-prefix "iptables: drop frag: "
--A INPUT -f -j DROP
--A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
--A INPUT -j REJECTLOG
+-A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROPLOG
+-A INPUT -f -j DROPLOG
+-A INPUT -j DROPLOG
-A FORWARD -p icmp -f -j DROPLOG
-A FORWARD -p icmp -j DROPLOG
-A FORWARD -m state --state INVALID -j DROP
-A FORWARD -j REJECTLOG
+-A OUTPUT -o lo -j ACCEPT
-A OUTPUT -p icmp -j ACCEPT
-A OUTPUT -p icmp -f -j DROPLOG
-A OUTPUT -p icmp -m state --state ESTABLISHED -m limit --limit 3/sec --limit-burst 8 -j ACCEPT
-A OUTPUT -p icmp -m state --state RELATED -m limit --limit 3/sec --limit-burst 8 -j RELATED_ICMP
-A OUTPUT -p icmp -m icmp --icmp-type 8 -m limit --limit 3/sec --limit-burst 8 -j ACCEPT
-A OUTPUT -p icmp -j DROPLOG
--A OUTPUT -o lo -j ACCEPT
-A OUTPUT -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
-A OUTPUT -m state --state INVALID -j DROP
--A OUTPUT -j REJECTLOG
--A ACCEPTLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "ACCEPT " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
+-A OUTPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 2222 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
+-A OUTPUT -p udp -m udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 6667 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 5222 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 873 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 995 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 465 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p udp -m udp --sport 1024:65535 --dport 123 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 20 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 443 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT
+-A OUTPUT -p tcp -m tcp --sport 1024:65535 --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT
+-A OUTPUT -j DROPLOG
+-A ACCEPTLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "iptables: ACCEPT " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
-A ACCEPTLOG -j ACCEPT
--A DROPLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "DROP " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
+-A DROPLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "iptables: DROP " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
-A DROPLOG -j DROP
--A REJECTLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "REJECT " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
+-A REJECTLOG -m limit --limit 3/sec --limit-burst 8 -j LOG --log-prefix "iptables: REJECT " --log-level 7 --log-tcp-sequence --log-tcp-options --log-ip-options
-A REJECTLOG -p tcp -j REJECT --reject-with tcp-reset
-A REJECTLOG -j REJECT --reject-with icmp-port-unreachable
-A RELATED_ICMP -p icmp -m icmp --icmp-type 3 -j ACCEPT
@@ -102,4 +108,4 @@ COMMIT
-A SYN_FLOOD -m limit --limit 2/sec --limit-burst 6 -j RETURN
-A SYN_FLOOD -j DROP
COMMIT
-# Completed on Tue Feb 21 13:55:04 2017
+# Completed on Sat Feb 25 18:34:17 2017
diff --git a/core/conf/sysctl.conf b/core/conf/sysctl.conf
index b60d3e6..d17c0c6 100644
--- a/core/conf/sysctl.conf
+++ b/core/conf/sysctl.conf
@@ -2,9 +2,13 @@
# /etc/sysctl.conf: configuration for system variables, see sysctl.conf(5)
#
-kernel.printk = 15 1 1 4
-kernel.randomize_va_space = 1
-kernel.shmmax = 500000000
+kernel.printk = 7 1 1 4
+kernel.randomize_va_space = 2
+# Shared Memory
+#kernel.shmmax = 500000000
+# Total allocated file handlers that can be allocated
+# fs.file-nr=
+vm.mmap_min_addr=65536
# Allow for more PIDs (to reduce rollover problems); may break some programs 32768
kernel.pid_max = 65536
@@ -16,14 +20,13 @@ kernel.pid_max = 65536
# Ioperm and iopl can be used to modify the running kernel.
# Unfortunately, some programs need this access to operate properly,
# the most notable of which are XFree86 and hwclock. hwclock can be
-# remedied by having RTC support in the kernel, so real-time
-# clock support is enabled if this option is enabled, to ensure
+# remedied by having RTC support in the kernel, so real-time
+# clock support is enabled if this option is enabled, to ensure
# that hwclock operates correctly.
-#
+#
# If you're using XFree86 or a version of Xorg from 2012 or earlier,
# you may not be able to boot into a graphical environment with this
# option enabled. In this case, you should use the RBAC system instead.
-#kernel.grsecurity.disable_priv_io = 1
kernel.grsecurity.disable_priv_io = 0
# If you say Y here, attempts to bruteforce exploits against forking
@@ -36,13 +39,13 @@ kernel.grsecurity.disable_priv_io = 0
# In the suid/sgid case, the attempt is logged, the user has all their
# existing instances of the suid/sgid binary terminated and will
# be unable to execute any suid/sgid binaries for 15 minutes.
-#
+#
# It is recommended that you also enable signal logging in the auditing
# section so that logs are generated when a process triggers a suspicious
# signal.
# If the sysctl option is enabled, a sysctl option with name
# "deter_bruteforce" is created.
-#kernel.grsecurity.deter_bruteforce = 1
+kernel.grsecurity.deter_bruteforce = 1
#
# Filesystem Protections
@@ -58,7 +61,7 @@ fs.file-max = 65535
# symlink is the owner of the directory. users will also not be
# able to hardlink to files they do not own. If the sysctl option is
# enabled, a sysctl option with name "linking_restrictions" is created.
-kernel.grsecurity.linking_restrictions = 1
+kernel.grsecurity.linking_restrictions = 0
# Apache's SymlinksIfOwnerMatch option has an inherent race condition
@@ -72,7 +75,7 @@ kernel.grsecurity.linking_restrictions = 1
# will be in place for the group you specify. If the sysctl option
# is enabled, a sysctl option with name "enforce_symlinksifowner" is
# created.
-#kernel.grsecurity.enforce_symlinksifowner = 1
+kernel.grsecurity.enforce_symlinksifowner = 0
#kernel.grsecurity.symlinkown_gid = 33
# if you say Y here, users will not be able to write to FIFOs they don't
@@ -80,7 +83,7 @@ kernel.grsecurity.linking_restrictions = 1
# the FIFO is the same owner of the directory it's held in. If the sysctl
# option is enabled, a sysctl option with name "fifo_restrictions" is
# created.
-#kernel.grsecurity.fifo_restrictions = 1
+kernel.grsecurity.fifo_restrictions = 0
# If you say Y here, a sysctl option with name "romount_protect" will
# be created. By setting this option to 1 at runtime, filesystems
@@ -115,14 +118,14 @@ kernel.grsecurity.chroot_caps = 1
# against another published method of breaking a chroot. If the sysctl
# option is enabled, a sysctl option with name "chroot_deny_chmod" is
# created.
-kernel.grsecurity.chroot_deny_chmod = 1
+kernel.grsecurity.chroot_deny_chmod = 1
# If you say Y here, processes inside a chroot will not be able to chroot
# again outside the chroot. This is a widely used method of breaking
-# out of a chroot jail and should not be allowed. If the sysctl
-# option is enabled, a sysctl option with name
+# out of a chroot jail and should not be allowed. If the sysctl
+# option is enabled, a sysctl option with name
# "chroot_deny_chroot" is created.
-kernel.grsecurity.chroot_deny_chroot = 1
+kernel.grsecurity.chroot_deny_chroot = 1
# If you say Y here, a well-known method of breaking chroots by fchdir'ing
# to a file descriptor of the chrooting process that points to a directory
@@ -182,14 +185,14 @@ kernel.grsecurity.chroot_deny_unix = 1
# directory, so that `.' can be outside the tree rooted at
# `/'. In particular, the super-user can escape from a
# `chroot jail' by doing `mkdir foo; chroot foo; cd ..'.
-#
+#
# It is recommended that you say Y here, since it's not known to break
# any software. If the sysctl option is enabled, a sysctl option with
# name "chroot_enforce_chdir" is created.
kernel.grsecurity.chroot_enforce_chdir = 1
# If you say Y here, processes inside a chroot will not be able to
-# kill, send signals with fcntl, ptrace, capget, getpgid, setpgid,
+# kill, send signals with fcntl, ptrace, capget, getpgid, setpgid,
# getsid, or view any process outside of the chroot. If the sysctl
# option is enabled, a sysctl option with name "chroot_findtask" is
# created.
@@ -212,7 +215,7 @@ kernel.grsecurity.chroot_restrict_nice = 1
# watch certain users instead of having a large amount of logs from the
# entire system. If the sysctl option is enabled, a sysctl option with
# name "audit_group" is created.
-kernel.grsecurity.audit_group = 0
+kernel.grsecurity.audit_group = 0
# If you say Y here, the exec and chdir logging features will only operate
# on a group you specify. This option is recommended if you only want to
@@ -228,67 +231,64 @@ kernel.grsecurity.audit_group = 0
# name "exec_logging" is created.
# WARNING: This option when enabled will produce a LOT of logs, especially
# on an active system.
-kernel.grsecurity.exec_logging = 0
+kernel.grsecurity.exec_logging = 0
# If you say Y here, all attempts to overstep resource limits will
# be logged with the resource name, the requested size, and the current
# limit. It is highly recommended that you say Y here. If the sysctl
# option is enabled, a sysctl option with name "resource_logging" is
# created. If the RBAC system is enabled, the sysctl value is ignored.
-#kernel.grsecurity.resource_logging = 1
-kernel.grsecurity.resource_logging = 0
+kernel.grsecurity.resource_logging = 1
# If you say Y here, all executions inside a chroot jail will be logged
# to syslog. This can cause a large amount of logs if certain
# applications (eg. djb's daemontools) are installed on the system, and
# is therefore left as an option. If the sysctl option is enabled, a
# sysctl option with name "chroot_execlog" is created.
-kernel.grsecurity.chroot_execlog = 0
+kernel.grsecurity.chroot_execlog = 0
# If you say Y here, all attempts to attach to a process via ptrace
# will be logged. If the sysctl option is enabled, a sysctl option
# with name "audit_ptrace" is created.
-#kernel.grsecurity.audit_ptrace = 1
-kernel.grsecurity.audit_ptrace = 0
+kernel.grsecurity.audit_ptrace = 1
# If you say Y here, all attempts to attach to a process via ptrace
# will be logged. If the sysctl option is enabled, a sysctl option
# with name "audit_ptrace" is created.
-kernel.grsecurity.audit_chdir = 0
+kernel.grsecurity.audit_chdir = 0
# If you say Y here, all mounts and unmounts will be logged. If the
# sysctl option is enabled, a sysctl option with name "audit_mount" is
# created.
-#kernel.grsecurity.audit_mount = 1
-kernel.grsecurity.audit_mount = 0
+kernel.grsecurity.audit_mount = 1
# If you say Y here, certain important signals will be logged, such as
# SIGSEGV, which will as a result inform you of when a error in a program
# occurred, which in some cases could mean a possible exploit attempt.
# If the sysctl option is enabled, a sysctl option with name
# "signal_logging" is created.
-kernel.grsecurity.signal_logging = 0
+kernel.grsecurity.signal_logging = 1
# If you say Y here, all failed fork() attempts will be logged.
# This could suggest a fork bomb, or someone attempting to overstep
# their process limit. If the sysctl option is enabled, a sysctl option
# with name "forkfail_logging" is created.
#kernel.grsecurity.forkfail_logging = 1
-kernel.grsecurity.forkfail_logging = 0
+kernel.grsecurity.forkfail_logging = 1
# If you say Y here, any changes of the system clock will be logged.
# If the sysctl option is enabled, a sysctl option with name
# "timechange_logging" is created.
-#kernel.grsecurity.timechange_logging = 1
+kernel.grsecurity.timechange_logging = 1
# if you say Y here, calls to mmap() and mprotect() with explicit
# usage of PROT_WRITE and PROT_EXEC together will be logged when
# denied by the PAX_MPROTECT feature. This feature will also
# log other problematic scenarios that can occur when PAX_MPROTECT
-# is enabled on a binary, like textrels and PT_GNU_STACK. If the
+# is enabled on a binary, like textrels and PT_GNU_STACK. If the
# sysctl option is enabled, a sysctl option with name "rwxmap_logging"
# is created.
-#kernel.grsecurity.rwxmap_logging = 1
+kernel.grsecurity.rwxmap_logging = 1
#
# Executable Protections
@@ -305,14 +305,14 @@ kernel.grsecurity.forkfail_logging = 0
kernel.grsecurity.dmesg = 1
# Hide symbol addresses in /proc/kallsyms
-kernel.kptr_restrict = 1
+#kernel.kptr_restrict = 2
# If you say Y here, TTY sniffers and other malicious monitoring
# programs implemented through ptrace will be defeated. If you
# have been using the RBAC system, this option has already been
# enabled for several years for all users, with the ability to make
# fine-grained exceptions.
-#
+#
# This option only affects the ability of non-root users to ptrace
# processes that are not a descendent of the ptracing process.
# This means that strace ./binary and gdb ./binary will still work,
@@ -327,7 +327,7 @@ kernel.grsecurity.harden_ptrace = 1
# prevent infoleaking of their contents. This option adds
# consistency to the use of that file mode, as the binary could normally
# be read out when run without privileges while ptracing.
-#
+#
# If the sysctl option is enabled, a sysctl option with name "ptrace_readexec"
# is created.
kernel.grsecurity.ptrace_readexec = 1
@@ -341,7 +341,7 @@ kernel.grsecurity.ptrace_readexec = 1
# same way, allowing the other threads of the process to continue
# running with root privileges. If the sysctl option is enabled,
# a sysctl option with name "consistent_setxid" is created.
-#kernel.grsecurity.consistent_setxid = 1
+kernel.grsecurity.consistent_setxid = 0
# If you say Y here, access to overly-permissive IPC objects (shared
# memory, message queues, and semaphores) will be denied for processes
@@ -359,7 +359,7 @@ kernel.grsecurity.ptrace_readexec = 1
# CAP_IPC_OWNER are still permitted to access these IPC objects.
# If the sysctl option is enabled, a sysctl option with name
# "harden_ipc" is created.
-kernel.grsecurity.harden_ipc = 1
+kernel.grsecurity.harden_ipc = 0
# If you say Y here, you will be able to choose a gid to add to the
# supplementary groups of users you want to mark as "untrusted."
@@ -367,7 +367,7 @@ kernel.grsecurity.harden_ipc = 1
# root-owned directories writable only by root. If the sysctl option
# is enabled, a sysctl option with name "tpe" is created.
kernel.grsecurity.tpe = 1
-kernel.grsecurity.tpe_gid = 101
+kernel.grsecurity.tpe_gid = 4
# If you say Y here, the group you specify in the TPE configuration will
# decide what group TPE restrictions will be *disabled* for. This
@@ -386,10 +386,11 @@ kernel.grsecurity.tpe_invert = 1
# world-writable, or in directories owned by root and writable only by
# root. If the sysctl option is enabled, a sysctl option with name
# "tpe_restrict_all" is created.
-kernel.grsecurity.tpe_restrict_all = 0
+kernel.grsecurity.tpe_restrict_all = 1
+
+kernel.grsecurity.harden_tty = 1
-#kernel.grsecurity.harden_tty = 1
#
# Network Protections
#
@@ -418,7 +419,7 @@ net.ipv6.conf.lo.disable_ipv6 = 1
#net.ipv6.conf.default.dad_transmits = 0
#net.ipv6.conf.default.max_addresses = 0
-# Avoid a smurf attack
+# Avoid a smurf attack, ping scanning
net.ipv4.icmp_echo_ignore_broadcasts = 1
# Turn on protection for bad icmp error messages
@@ -447,10 +448,6 @@ net.ipv4.conf.default.log_martians = 1
## ignore echo broadcast requests to prevent being part of smurf attacks (default)
net.ipv4.icmp_echo_ignore_broadcasts = 1
-# No source routed packets here
-net.ipv4.conf.all.accept_source_route = 0
-net.ipv4.conf.default.accept_source_route = 0
-
## sets the kernels reverse path filtering mechanism to value 1(on)
## will do source validation of the packet's recieved from all the interfaces on the machine
## protects from attackers that are using ip spoofing methods to do harm
@@ -459,16 +456,23 @@ net.ipv4.conf.default.rp_filter = 1
#net.ipv6.conf.default.rp_filter = 1
#net.ipv6.conf.all.rp_filter = 1
+
# Make sure no one can alter the routing tables
+# Act as a router, necessary for Access Point
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
+# No source routed packets here
+# Discard packets with source routes, ip spoofing
+net.ipv4.conf.all.accept_source_route = 0
+net.ipv4.conf.default.accept_source_route = 0
-# Act as a router, necessary for Access Point
-net.ipv4.ip_forward = 1
-net.ipv4.conf.all.send_redirects = 1
-net.ipv4.conf.default.send_redirects = 1
+
+net.ipv4.conf.all.send_redirects = 0
+net.ipv4.conf.default.send_redirects = 0
+
+net.ipv4.ip_forward = 0
# Increase system IP port limits
net.ipv4.ip_local_port_range = 2000 65000
@@ -477,15 +481,29 @@ net.ipv4.ip_local_port_range = 2000 65000
net.ipv4.tcp_rmem = 4096 87380 8388608
net.ipv4.tcp_wmem = 4096 87380 8388608
+# Disable proxy_arp
+net.ipv4.conf.default.proxy_arp = 0
+net.ipv4.conf.all.proxy_arp = 0
+
+# Disable bootp_relay
+net.ipv4.conf.default.bootp_relay = 0
+net.ipv4.conf.all.bootp_relay = 0
+
+# Decrease TCP fin timeout
+net.ipv4.tcp_fin_timeout = 30
+# Decrease TCP keep alive time
+net.ipv4.tcp_keepalive_time = 1800
+# Sen SynAck retries to 3
+net.ipv4.tcp_synack_retries = 3
# If you say Y here, neither TCP resets nor ICMP
# destination-unreachable packets will be sent in response to packets
# sent to ports for which no associated listening process exists.
-# This feature supports both IPV4 and IPV6 and exempts the
-# loopback interface from blackholing. Enabling this feature
+# This feature supports both IPV4 and IPV6 and exempts the
+# loopback interface from blackholing. Enabling this feature
# makes a host more resilient to DoS attacks and reduces network
# visibility against scanners.
-#
+#
# The blackhole feature as-implemented is equivalent to the FreeBSD
# blackhole feature, as it prevents RST responses to all packets, not
# just SYNs. Under most application behavior this causes no
@@ -498,7 +516,7 @@ net.ipv4.tcp_wmem = 4096 87380 8388608
# can spend in LAST_ACK state. If you're using haproxy and not
# all servers it connects to have this option enabled, consider
# disabling this feature on the haproxy host.
-#
+#
# If the sysctl option is enabled, two sysctl options with names
# "ip_blackhole" and "lastack_retries" will be created.
# While "ip_blackhole" takes the standard zero/non-zero on/off
@@ -506,14 +524,14 @@ net.ipv4.tcp_wmem = 4096 87380 8388608
# "tcp_retries1" and "tcp_retries2". The default value of 4
# prevents a socket from lasting more than 45 seconds in LAST_ACK
# state.
-#kernel.grsecurity.ip_blackhole = 1
-#kernel.grsecurity.lastack_retries = 4
+kernel.grsecurity.ip_blackhole = 1
+kernel.grsecurity.lastack_retries = 4
# If you say Y here, you will be able to choose a GID of whose users will
# be unable to connect to other hosts from your machine or run server
# applications from your machine. If the sysctl option is enabled, a
# sysctl option with name "socket_all" is created.
-#kernel.grsecurity.socket_all = 1
+kernel.grsecurity.socket_all = 0
# Here you can choose the GID to disable socket access for. Remember to
# add the users you want socket access disabled for to the GID
@@ -527,13 +545,13 @@ net.ipv4.tcp_wmem = 4096 87380 8388608
# you specify will have to use passive mode when initiating ftp transfers
# from the shell on your machine. If the sysctl option is enabled, a
# sysctl option with name "socket_client" is created.
-#kernel.grsecurity.socket_client = 1
+kernel.grsecurity.socket_client = 1
# Here you can choose the GID to disable client socket access for.
# Remember to add the users you want client socket access disabled for to
# the GID specified here. If the sysctl option is enabled, a sysctl
# option with name "socket_client_gid" is created.
-#kernel.grsecurity.socket_client_gid = 203
+kernel.grsecurity.socket_client_gid = 15
# If you say Y here, you will be able to choose a GID of whose users will
# be unable to connect to other hosts from your machine, but will be
@@ -541,13 +559,13 @@ net.ipv4.tcp_wmem = 4096 87380 8388608
# you specify will have to use passive mode when initiating ftp transfers
# from the shell on your machine. If the sysctl option is enabled, a
# sysctl option with name "socket_client" is created.
-#kernel.grsecurity.socket_server = 1
+kernel.grsecurity.socket_server = 1
# Here you can choose the GID to disable server socket access for.
# Remember to add the users you want server socket access disabled for to
# the GID specified here. If the sysctl option is enabled, a sysctl
# option with name "socket_server_gid" is created.
-#kernel.grsecurity.socket_server_gid = 204
+kernel.grsecurity.socket_server_gid = 99
#
# Physical Protections
@@ -559,17 +577,15 @@ net.ipv4.tcp_wmem = 4096 87380 8388608
# device insertion will be logged. This option is intended to be
# used against custom USB devices designed to exploit vulnerabilities
# in various USB device drivers.
-#
+#
# For greatest effectiveness, this sysctl should be set after any
# relevant init scripts. This option is safe to enable in distros
# as each user can choose whether or not to toggle the sysctl.
-#kernel.grsecurity.deny_new_usb = 0
+kernel.grsecurity.deny_new_usb = 0
#
# Restrict grsec sysctl changes after this was set
#
-#kernel.grsecurity.grsec_lock = 1
-
-
+kernel.grsecurity.grsec_lock = 0
# End of file