aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSilvino Silva <silvino@bk.ru>2016-10-03 22:48:38 +0100
committerSilvino Silva <silvino@bk.ru>2016-10-03 22:49:20 +0100
commitc30b14dbcfb60418a0d7fd050a096c9bc20a380b (patch)
tree0aa945da5a98a0a1d837ff55338800d0a46db820
parentcf0657e1b62b59e2f54bc0cb88870c4db1e36769 (diff)
parente6d81cddaba6e3a1583a193ddf1b7405fbdd9889 (diff)
downloaddoc-c30b14dbcfb60418a0d7fd050a096c9bc20a380b.tar.gz
Release 0.2.3
-rw-r--r--core/conf/hosts4
-rw-r--r--core/conf/rc.d/iptables50
-rwxr-xr-xcore/conf/rc.d/net9
-rw-r--r--core/configure.html21
-rw-r--r--core/exim.html2
-rw-r--r--core/index.html6
-rw-r--r--core/network.html123
-rw-r--r--host.html19
-rw-r--r--index.html2
-rw-r--r--tools/conf/etc/dnsmasq.conf22
-rw-r--r--tools/conf/etc/nginx/conf.d/10-default.conf8
-rw-r--r--tools/conf/etc/nginx/nginx.conf141
-rw-r--r--tools/conf/etc/nginx/sites-enabled/default.conf49
-rw-r--r--tools/conf/etc/nginx/sites/default.conf60
-rw-r--r--tools/conf/etc/nginx/sites/drupal.conf129
-rw-r--r--tools/conf/etc/nginx/sites/flyspray.conf40
-rw-r--r--tools/conf/etc/nginx/sites/laravel.conf28
-rwxr-xr-xtools/conf/etc/rc.d/blan63
-rwxr-xr-xtools/conf/etc/rc.d/postgresql16
-rw-r--r--tools/conf/srv/pgsql/data/pg_hba.conf96
-rw-r--r--tools/conf/srv/pgsql/data/postgresql.conf623
-rw-r--r--tools/index.html62
-rw-r--r--tools/lvm.html151
-rw-r--r--tools/network.html46
-rw-r--r--tools/nginx.html291
-rw-r--r--tools/openssh.html12
-rw-r--r--tools/postgresql.html239
-rw-r--r--tools/qemu.html70
-rw-r--r--tools/scripts/config-install.sh4
-rw-r--r--tools/scripts/install-nginx.sh24
-rw-r--r--tools/scripts/install-php.sh7
-rw-r--r--tools/scripts/install-postgres.sh16
-rw-r--r--tools/scripts/replace.sh7
-rw-r--r--tools/scripts/system-iptables.sh (renamed from tools/scipts/iptables.sh)48
-rw-r--r--tools/scripts/system-qemu.sh15
-rw-r--r--tools/squid.html8
-rw-r--r--tools/storage.html345
37 files changed, 2148 insertions, 708 deletions
diff --git a/core/conf/hosts b/core/conf/hosts
index 2fb89fb..5c64924 100644
--- a/core/conf/hosts
+++ b/core/conf/hosts
@@ -3,10 +3,10 @@
#
# IPv4
-127.0.0.1 localhost c9
+127.0.0.1 localhost.localdomain localhost c9
#<ip-address> <hostname.domain.org> <aliases>
-#192.168.1.9 c9.example.org
+10.0.0.1 core.privat-network.net c9.core
# IPv6
#::1 ip6-localhost ip6-loopback
diff --git a/core/conf/rc.d/iptables b/core/conf/rc.d/iptables
index 2d77722..3f29928 100644
--- a/core/conf/rc.d/iptables
+++ b/core/conf/rc.d/iptables
@@ -1,12 +1,12 @@
#!/bin/sh
#
-# /etc/rc.d/iptables: load/unload iptable rules
+# /etc/rc.d/iptables: load/unload iptable rules
#
case $1 in
start)
echo "Starting IPv4 firewall filter table..."
- /usr/sbin/iptables-restore < /etc/iptables/rules.v4
+ /usr/sbin/iptables-restore < /etc/iptables/rules.v4
;;
stop)
echo "Stopping firewall and deny everyone..."
@@ -21,16 +21,60 @@ stop)
iptables -t security -F
iptables -t security -X
-
/usr/sbin/iptables -P INPUT DROP
/usr/sbin/iptables -P FORWARD DROP
/usr/sbin/iptables -P OUTPUT DROP
+
+ # Unlimited on local
+ /usr/sbin/iptables -A INPUT -i lo -j ACCEPT
+ /usr/sbin/iptables -A OUTPUT -o lo -j ACCEPT
+
+ # log everything else and drop
+ /usr/sbin/iptables -A INPUT -j LOG --log-level 7 --log-prefix "iptables: INPUT: "
+ /usr/sbin/iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "iptables: OUTPUT: "
+ /usr/sbin/iptables -A FORWARD -j LOG --log-level 7 --log-prefix "iptables: FORWARD: "
+
+ ;;
+open)
+ echo "Outgoing Open firewall and deny everyone..."
+ iptables -F
+ iptables -X
+ iptables -t nat -F
+ iptables -t nat -X
+ iptables -t mangle -F
+ iptables -t mangle -X
+ iptables -t raw -F
+ iptables -t raw -X
+ iptables -t security -F
+ iptables -t security -X
+
+ /usr/sbin/iptables -P INPUT DROP
+ /usr/sbin/iptables -P FORWARD DROP
+ /usr/sbin/iptables -P OUTPUT ACCEPT
+
+ # Unlimited on local
+ /usr/sbin/iptables -A INPUT -i lo -j ACCEPT
+ /usr/sbin/iptables -A OUTPUT -o lo -j ACCEPT
+
+ # Accept passive
+ /usr/sbin/iptables -A INPUT -p tcp --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT
+
+ /usr/sbin/iptables -A INPUT -p udp --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT
+
+
+ # log everything else and drop
+ /usr/sbin/iptables -A INPUT -j LOG --log-level 7 --log-prefix "iptables: INPUT: "
+ #/usr/sbin/iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "iptables: OUTPUT: "
+ /usr/sbin/iptables -A FORWARD -j LOG --log-level 7 --log-prefix "iptables: FORWARD: "
+
;;
+
restart)
$0 stop
$0 start
;;
*)
+
echo "usage: $0 [start|stop|restart]"
;;
esac
diff --git a/core/conf/rc.d/net b/core/conf/rc.d/net
index d111a25..d46583b 100755
--- a/core/conf/rc.d/net
+++ b/core/conf/rc.d/net
@@ -9,9 +9,9 @@ TYPE="static"
# For "static" connections, specify your settings here:
# To see your available devices run "ip link".
DEV=enp8s0
-ADDR=192.168.1.33
+ADDR=10.0.0.1
MASK=24
-GW=192.168.1.1
+GW=10.0.0.1
# Optional settings:
DHCPOPTS="-h $(/bin/hostname) -C resolv.conf $DEV"
@@ -23,7 +23,7 @@ case $1 in
else
/sbin/ip addr add ${ADDR}/${MASK} dev ${DEV} broadcast +
/sbin/ip link set ${DEV} up
- /sbin/ip route add default via ${GW}
+ #/sbin/ip route add default via ${GW}
fi
;;
stop)
@@ -31,10 +31,7 @@ case $1 in
/usr/bin/pkill -F /var/run/dhcpcd-${DEV}.pid
else
- # /sbin/ip route del default
- /sbin/ip route flush dev ${DEV}
/sbin/ip link set ${DEV} down
- # /sbin/ip addr del ${ADDR}/${MASK} dev ${DEV}
/sbin/ip addr flush dev ${DEV}
fi
;;
diff --git a/core/configure.html b/core/configure.html
index 724b12f..f604f9c 100644
--- a/core/configure.html
+++ b/core/configure.html
@@ -59,14 +59,21 @@
with core.privat-server.net pointing to c9 host;</p>
<pre>
- #
- # /etc/hosts: static lookup table for host names
- #
-
# IPv4
- 127.0.0.1 localhost c9
- #<ip-address> <hostname.domain.org> <aliases>
- # 192.168.1.9 core.privat-server.net
+ 127.0.0.1 localhost.localdomain localhost c9
+
+ #&lt;ip-address&gt; &lt;hostname.domain.org&gt; &lt;aliases&gt;
+ 10.0.0.1 core.privat-network.net c9.core
+
+ # IPv6
+ #::1 ip6-localhost ip6-loopback
+ #fe00::0 ip6-localnet
+ #ff00::0 ip6-mcastprefix
+ #ff02::1 ip6-allnodes
+ #ff02::2 ip6-allrouters
+ #ff02::3 ip6-allhosts
+
+ # End of file
</pre>
<h2 id="time">1.2.2. Set timezone</h2>
diff --git a/core/exim.html b/core/exim.html
index c2a5a63..c4b3c95 100644
--- a/core/exim.html
+++ b/core/exim.html
@@ -51,7 +51,7 @@
<pre>
# chown mail:mail /etc/ssl/keys/exim.key
- # chmod 644 /etc/ssl/keys/exim.key
+ # chmod 0600 /etc/ssl/keys/exim.key
# chmod 644 /etc/ssl/certs/exim.cert
</pre>
diff --git a/core/index.html b/core/index.html
index 1200ca6..d3eff38 100644
--- a/core/index.html
+++ b/core/index.html
@@ -72,9 +72,9 @@
<ul>
<li><a href="network.html">2.1. Network</a>
<ul>
- <li><a href="network.html#iptables">2.1.1. Iptables</a></li>
- <li><a href="network.html#resolv">2.1.2. Resolver</a></li>
- <li><a href="network.html#static">2.1.3. Static ip</a></li>
+ <li><a href="network.html#resolv">2.1.1. Resolver</a></li>
+ <li><a href="network.html#static">2.1.2. Static ip</a></li>
+ <li><a href="network.html#iptables">2.1.3. Iptables</a></li>
<li><a href="network.html#wpa">2.1.4. Wpa and dhcpd</a></li>
<li><a href="network.html#sysctl">2.1.5. Sysctl</a></li>
</ul>
diff --git a/core/network.html b/core/network.html
index 04f1266..b8b7617 100644
--- a/core/network.html
+++ b/core/network.html
@@ -23,11 +23,87 @@
connection to router and add as default gateway.</dd>
</dl>
- <p>If is first boot after install configure iptables and
- one of above described scripts then proceed to upgrade your
- system.</p>
+ <p>If is first boot after install configure iptables and
+ one of above described scripts then proceed to upgrade your
+ system.</p>
- <h2 id="iptables">2.1.1. Iptables</h2>
+ <h2 id="resolv">2.1.1. Resolver</h2>
+
+ <p>Configure your resolver with a server that don't censorship there for
+ respect your freedom and privacy. Read
+ <a href="https://trac.torproject.org/projects/tor/wiki/doc/DnsResolver/PublicDnsResolvers#PublicDNSServers">Tor Dns Resolver</a>
+ for more information. This example will use
+ <a href="http://www.chaoscomputerclub.de/en/censorship/dns-howto">Chaos Computer Club</a>
+ server, edit /etc/resolv.conf and make it immutable;</p>
+
+ <pre>
+ # /etc/resolv.conf.head can replace this line
+ nameserver 213.73.91.35
+ # /etc/resolv.conf.tail can replace this line
+ </pre>
+
+ <pre>
+ # chattr +i /etc/resolv.conf
+ </pre>
+
+ <h2 id="static">2.1.2. Static IP</h2>
+
+ <p>Current example of <a href="conf/rc.d/net">/etc/rc.d/net</a>;</p>
+
+ <pre>
+ Address: 10.0.0.1 00001010.00000000.00000000 .00000001
+ Netmask: 255.255.255.0 = 24 11111111.11111111.11111111 .00000000
+ Wildcard: 0.0.0.255 00000000.00000000.00000000 .11111111
+ =>
+ Network: 10.0.0.0/24 00001010.00000000.00000000 .00000000 (Class A)
+ Broadcast: 10.0.0.255 00001010.00000000.00000000 .11111111
+ HostMin: 10.0.0.1 00001010.00000000.00000000 .00000001
+ HostMax: 10.0.0.254 00001010.00000000.00000000 .11111110
+ Hosts/Net: 254 (Private Internet)
+ </pre>
+
+ <pre>
+ # DEV=enp8s0
+ # ADDR=10.0.0.1
+ # MASK=24
+ # GW=10.0.0.1
+ # ip addr flush dev ${DEV}
+ # ip route flush dev ${DEV}
+ </pre>
+
+ <pre>
+ # ip addr add ${ADDR}/${MASK} dev ${DEV} broadcast +
+ # ip link set ${DEV} up
+ </pre>
+
+ <p>Script don't add above network as gateway;</p>
+
+ <pre>
+ # ip route add default via ${GW}
+ </pre>
+
+ <p>Other IP class used in home setups;</p>
+
+ <pre>
+ Address: 192.168.0.1 11000000.10101000.00000000 .00000001
+ Netmask: 255.255.255.0 = 24 11111111.11111111.11111111 .00000000
+ Wildcard: 0.0.0.255 00000000.00000000.00000000 .11111111
+ =>
+ Network: 192.168.0.0/24 11000000.10101000.00000000 .00000000 (Class C)
+ Broadcast: 192.168.0.255 11000000.10101000.00000000 .11111111
+ HostMin: 192.168.0.1 11000000.10101000.00000000 .00000001
+ HostMax: 192.168.0.254 11000000.10101000.00000000 .11111110
+ Hosts/Net: 254 (Private Internet)
+ </pre>
+
+ <pre>
+ # DEV=enp8s0
+ # ADDR=192.168.1.1
+ # MASK=24
+ # GW=192.168.1.254
+ </pre>
+
+ <h2 id="iptables">2.1.3. Iptables</h2>
<p>For more information about iptables read
<a href="https://wiki.archlinux.org/index.php/Iptables">arch wiki</a>.
@@ -65,39 +141,6 @@
</pre>
<p>
- <h2 id="resolv">2.1.2. Resolver</h2>
-
- <p>Configure your resolver with a server that don't censorship there for
- respect your freedom and privacy. Read
- <a href="https://trac.torproject.org/projects/tor/wiki/doc/DnsResolver/PublicDnsResolvers#PublicDNSServers">Tor Dns Resolver</a>
- for more information. This example will use
- <a href="http://www.chaoscomputerclub.de/en/censorship/dns-howto">Chaos Computer Club</a>
- server, edit /etc/resolv.conf and make it immutable;</p>
-
- <pre>
- # /etc/resolv.conf.head can replace this line
- nameserver 213.73.91.35
- # /etc/resolv.conf.tail can replace this line
- </pre>
-
- <pre>
- # chattr +i /etc/resolv.conf
- </pre>
-
- <h2 id="static">2.1.3. Static IP</h2>
-
- <pre>
- # ip link
- # ip addr flush dev ${DEV}
- # ip route flush dev ${DEV}
- </pre>
-
- <pre>
- # ip addr add ${ADDR}/${MASK} dev ${DEV} broadcast +
- # ip link set ${DEV} up
- # ip route add default via ${GW}
- </pre>
-
<h2 id="wpa">2.1.4. Wpa and dhcpd</h2>
@@ -144,10 +187,10 @@
</pre>
<p>Use <a href="conf/rc.d/wlan">/etc/rc.d/wlan</a>
- init script to auto load wpa configuration and dhcp
+ init script to auto load wpa configuration and dhcp
client.</p>
- <h3>2.1.4.2. Wpa Cli</h3>
+ <h3>2.1.4.2. Wpa Cli</h3>
<pre>
# wpa_cli
@@ -302,7 +345,7 @@
<p>Change to act as a router (default of conf/sysctl.conf);</p>
<pre>
- # Act as a router, necessary for Access Point
+ # Act as a router, necessary for Access Point
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.default.send_redirects = 1
diff --git a/host.html b/host.html
index 01aaf4f..35d0d7c 100644
--- a/host.html
+++ b/host.html
@@ -26,6 +26,7 @@
<dt>Hostname</dt>
<dd>c9</dd>
<dd><a href="core/configure.html#hostname">Hostname</a></dd>
+ <dd><a href="core/exim.html#cert">Exim certificates</a></dd>
</dl>
<h2>Network</h2>
@@ -48,23 +49,19 @@
<a href="core/network.html#iptables">iptables</a> with help
of <a href="core/script/iptables.sh">iptables.sh</a> script.</dd>
+ <dt>FQDN</dt>
+
+ <dd>core.privat-server.net</dd>
+ <dd><a href="tools/gpg.html#genkey">GPG certificates</a></dd>
+ <dd><a href="tools/network.html#dnsmasq">Dnsmasq</a></dd>
+ <dd><a href="tools/nginx.html">Nginx</a></dd>
+
<dt>Access Point/Router</dt>
<dd>Wireless interface <a href="tools/wireless.html">handle access point</a>.
</dd>
<dd><a href="tools/hostapd.html">Access Point</a></dd>
- <dt>FQDN</dt>
-
- <dd>core.privat-server.net</dd>
- <dd><a href="core/configure.html#hostname">Hostname</a></dd>
- <dd><a href="core/exim.html#cert">Exim certificates</a></dd>
- <dd><a href="tools/network.html#dnsmasq">Dnsmasq</a></dd>
- <dd><a href="tools/gpg.html#genkey">GPG certificates</a></dd>
-
- <dt>DNS</dt>
- <dd><a href="tools/network.html#dnscrypt">Dns encryption</a></dd>
- <dd><a href="tools/network.html#dnsmasq">Dns cache</a></dd>
</dl>
<h2>DevOps</h2>
diff --git a/index.html b/index.html
index 86a2f1a..2122690 100644
--- a/index.html
+++ b/index.html
@@ -27,7 +27,7 @@
<p>Version;</p>
<pre>
- rev 0.2.2
+ rev 0.2.3
</pre>
diff --git a/tools/conf/etc/dnsmasq.conf b/tools/conf/etc/dnsmasq.conf
index 35d75c8..f09b6a6 100644
--- a/tools/conf/etc/dnsmasq.conf
+++ b/tools/conf/etc/dnsmasq.conf
@@ -8,6 +8,7 @@
# (53). Setting this to zero completely disables DNS function,
# leaving only DHCP and/or TFTP.
#port=5353
+port=53
# The following two options make you a better netizen, since they
# tell dnsmasq to filter out queries which the public DNS cannot
@@ -74,7 +75,7 @@ server=127.0.0.1#40
# Add local-only domains here, queries in these domains are answered
# from /etc/hosts or DHCP only.
-#local=/localnet/
+local=/core/
# Add domains which you want to force to an IP address here.
# The example below send any host in double-click.net to a local
@@ -106,16 +107,20 @@ server=127.0.0.1#40
# specified interfaces (and the loopback) give the name of the
# interface (eg eth0) here.
# Repeat the line for more than one interface.
-#interface=
+interface=lo
+interface=br0
+
# Or you can specify which interface _not_ to listen on
-#except-interface=
+except-interface=wlp7s0
# Or which to listen on by address (remember to include 127.0.0.1 if
# you use this.)
-#listen-address=
+listen-address=127.0.0.1
+#listen-address=10.0.0.1
# If you want dnsmasq to provide only DNS service on an interface,
# configure it as shown above, and then use the following line to
# disable DHCP and TFTP on it.
-#no-dhcp-interface=
+no-dhcp-interface=lo
+no-dhcp-interface=wlp7s0
# On systems which support it, dnsmasq binds the wildcard address,
# even when it is listening on only some interfaces. It then discards
@@ -124,7 +129,7 @@ server=127.0.0.1#40
# want dnsmasq to really bind only the interfaces it is listening on,
# uncomment this option. About the only time you may need this is when
# running another nameserver on the same machine.
-#bind-interfaces
+bind-interfaces
# If you don't want dnsmasq to read /etc/hosts, uncomment the
# following line.
@@ -136,7 +141,7 @@ addn-hosts=/etc/hosts.dnsmasq
# Set this (and domain: see below) if you want to have a domain
# automatically added to simple names in a hosts-file.
-#expand-hosts
+expand-hosts
# Set the domain for dnsmasq. this is optional, but if it is set, it
# does the following things.
@@ -145,7 +150,7 @@ addn-hosts=/etc/hosts.dnsmasq
# 2) Sets the "domain" DHCP option thereby potentially setting the
# domain of all systems configured by DHCP
# 3) Provides the domain part for "expand-hosts"
-#domain=thekelleys.org.uk
+domain=core.privat-network.net
# Set a different domain for a particular subnet
#domain=wireless.thekelleys.org.uk,192.168.2.0/24
@@ -159,6 +164,7 @@ addn-hosts=/etc/hosts.dnsmasq
# repeat this for each network on which you want to supply DHCP
# service.
#dhcp-range=192.168.0.50,192.168.0.150,12h
+dhcp-range=br0,10.0.0.5,10.0.0.50,12h
# This is an example of a DHCP range where the netmask is given. This
# is needed for networks we reach the dnsmasq DHCP server via a relay
diff --git a/tools/conf/etc/nginx/conf.d/10-default.conf b/tools/conf/etc/nginx/conf.d/10-default.conf
new file mode 100644
index 0000000..97ee31b
--- /dev/null
+++ b/tools/conf/etc/nginx/conf.d/10-default.conf
@@ -0,0 +1,8 @@
+##
+# Virtual Host Redirection 80 to 443
+##
+server {
+ listen 80 default_server;
+ server_name _;
+ return 301 https://$host$request_uri;
+}
diff --git a/tools/conf/etc/nginx/nginx.conf b/tools/conf/etc/nginx/nginx.conf
new file mode 100644
index 0000000..ddbdee6
--- /dev/null
+++ b/tools/conf/etc/nginx/nginx.conf
@@ -0,0 +1,141 @@
+#
+# /etc/nginx/nginx.conf - nginx server configuration
+#
+
+
+user nginx;
+worker_processes auto;
+
+error_log /var/log/nginx/error.log;
+
+pid /var/run/nginx.pid;
+
+
+events {
+ worker_connections 1024;
+}
+
+
+http {
+ include mime.types;
+ default_type application/octet-stream;
+
+ ##
+ # SSL Settings
+ ##
+ ssl_protocols TLSv1 TLSv1.1 TLSv1.2; # Dropping SSLv3, ref: POODLE
+ ssl_prefer_server_ciphers on;
+
+ # ssl on;
+ ssl_certificate /etc/ssl/certs/nginx.crt;
+ ssl_certificate_key /etc/ssl/keys/nginx.key;
+
+ #log_format main '$remote_addr - $remote_user [$time_local] "$request" '
+ # '$status $body_bytes_sent "$http_referer" '
+ # '"$http_user_agent" "$http_x_forwarded_for"';
+
+ access_log /var/log/nginx/access.log;
+ error_log /var/log/nginx/error.log;
+
+ sendfile on;
+ #tcp_nopush on;
+
+ keepalive_timeout 65;
+ client_body_timeout 12;
+ client_header_timeout 12;
+ send_timeout 65;
+
+
+ gzip on;
+ gzip_vary on;
+ #gzip_proxied any;
+ gzip_comp_level 9;
+ # gzip_buffers 16 8k;
+ # gzip_http_version 1.1;
+ gzip_types text/plain text/css application/json application/javascript text/xml application/xml application/xml+rss text/javascript;
+
+
+ include /etc/nginx/conf.d/*.conf;
+ include /etc/nginx/sites-enabled/*.conf;
+
+ #server {
+ # listen 80;
+ # server_name localhost;
+ #
+ # #charset koi8-r;
+ #
+ # location / {
+ # root html;
+ # index index.html index.htm;
+ # }
+ #
+ # error_page 404 /404.html;
+ #
+ # # redirect server error pages to the static page /50x.html
+ # #
+ # error_page 500 502 503 504 /50x.html;
+ # location = /50x.html {
+ # root html;
+ # }
+ #
+ # # proxy the PHP scripts to Apache listening on 127.0.0.1:80
+ # #
+ # #location ~ \.php$ {
+ # # proxy_pass http://127.0.0.1;
+ # #}
+ #
+ # # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
+ # #
+ # #location ~ \.php$ {
+ # # root html;
+ # # fastcgi_pass 127.0.0.1:9000;
+ # # fastcgi_index index.php;
+ # # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
+ # # include fastcgi_params;
+ # #}
+ #
+ # # deny access to .htaccess files, if Apache's document root
+ # # concurs with nginx's one
+ # #
+ # #location ~ /\.ht {
+ # # deny all;
+ # #}
+ #}
+
+
+ # another virtual host using mix of IP-, name-, and port-based configuration
+ #
+ #server {
+ # listen 8000;
+ # listen somename:8080;
+ # server_name somename alias another.alias;
+
+ # location / {
+ # root html;
+ # index index.html index.htm;
+ # }
+ #}
+
+
+ # HTTPS server
+ #
+ #server {
+ # listen 443 ssl;
+ # server_name localhost;
+
+ # ssl_certificate cert.pem;
+ # ssl_certificate_key cert.key;
+
+ # ssl_session_cache shared:SSL:1m;
+ # ssl_session_timeout 5m;
+
+ # ssl_ciphers HIGH:!aNULL:!MD5;
+ # ssl_prefer_server_ciphers on;
+
+ # location / {
+ # root html;
+ # index index.html index.htm;
+ # }
+ #}
+
+}
diff --git a/tools/conf/etc/nginx/sites-enabled/default.conf b/tools/conf/etc/nginx/sites-enabled/default.conf
new file mode 100644
index 0000000..4e01b88
--- /dev/null
+++ b/tools/conf/etc/nginx/sites-enabled/default.conf
@@ -0,0 +1,49 @@
+
+server {
+ listen 443 ssl;
+ # listen [::]:443 ssl;
+
+ server_name c9.core;
+
+ root /srv/www/default;
+
+ location /distfiles {
+ alias /usr/ports/distfiles;
+ }
+
+
+ location /bug {
+ index index.php;
+ alias /srv/www/default/flyspray;
+ try_files $uri $uri/ index.php$is_args$args;
+ }
+
+ location ~ ^/bug(.+\.php)$ { ### This location block was the solution
+ alias /srv/www/default/flyspray;
+
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index index.php;
+ try_files $uri /index.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$1;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+
+ location / {
+ alias /srv/www/default/pmwiki/;
+ index pmwiki.php
+ try_files $uri $uri/ /pmwiki.php$is_args$args;
+ }
+
+ location ~ \.php$ {
+ alias /srv/www/default/pmwiki;
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index pmwiki.php;
+ try_files $uri /pmwiki.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+}
diff --git a/tools/conf/etc/nginx/sites/default.conf b/tools/conf/etc/nginx/sites/default.conf
new file mode 100644
index 0000000..1c71c44
--- /dev/null
+++ b/tools/conf/etc/nginx/sites/default.conf
@@ -0,0 +1,60 @@
+
+server {
+ listen 443 ssl;
+ # listen [::]:443 ssl;
+
+ server_name c9.core;
+
+ root /srv/www/default;
+
+ location /ports {
+ alias /var/ports/ports;
+ autoindex on;
+ }
+
+ location /distfiles {
+ alias /var/ports/distfiles;
+ autoindex on;
+ }
+
+ location /packages {
+ root /var/ports/packages;
+ autoindex off;
+ }
+
+
+ location /bug {
+ index index.php;
+ alias /srv/www/default/flyspray;
+ try_files $uri $uri/ index.php$is_args$args;
+ }
+
+ location ~ ^/bug(.+\.php)$ { ### This location block was the solution
+ alias /srv/www/default/flyspray;
+
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index index.php;
+ try_files $uri /index.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$1;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+
+ location / {
+ alias /srv/www/default/pmwiki/;
+ index pmwiki.php
+ try_files $uri $uri/ /pmwiki.php$is_args$args;
+ }
+
+ location ~ \.php$ {
+ alias /srv/www/default/pmwiki;
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index pmwiki.php;
+ try_files $uri /pmwiki.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+}
diff --git a/tools/conf/etc/nginx/sites/drupal.conf b/tools/conf/etc/nginx/sites/drupal.conf
new file mode 100644
index 0000000..0407a6a
--- /dev/null
+++ b/tools/conf/etc/nginx/sites/drupal.conf
@@ -0,0 +1,129 @@
+server {
+
+ listen 192.168.1.254:443 ssl;
+ listen 10.0.0.254:443 ssl;
+
+ server_name c9.core
+
+ root /srv/www/default/drupal; ## &lt;-- Your only path reference.
+
+ # Enable compression, this will help if you have for instance advagg¿? module
+ # by serving Gzip versions of the files.
+ gzip_static on;
+
+ location ~ ^/stats/(.*)$ {
+ alias /srv/www/stats/$1;
+ autoindex on;
+ }
+
+ location /doc {
+ alias /srv/www/c9-doc;
+ autoindex on;
+ }
+
+ location /ports {
+ alias /var/ports/ports;
+ autoindex on;
+ }
+
+ location /distfiles {
+ alias /var/ports/distfiles;
+ autoindex on;
+ }
+
+
+ location /packages {
+ root /var/ports/packages;
+ autoindex off;
+ }
+
+
+ location = /favicon.ico {
+ log_not_found off;
+ access_log off;
+ }
+
+ location = /robots.txt {
+ allow all;
+ log_not_found off;
+ }
+
+ # This matters if you use drush prior to 5.x
+ # After 5.x backups are stored outside the Drupal install.
+ #location = /backup {
+ # deny all;
+ #}
+
+ # Very rarely should these ever be accessed outside of your lan
+ location ~* \.(txt|log)$ {
+ allow 192.168.0.0/16;
+ deny all;
+ }
+
+ location ~ \..*/.*\.php$ {
+ return 403;
+ }
+
+ # No no for private
+ location ~ ^/sites/.*/private/ {
+ return 403;
+ }
+
+ # Block access to "hidden" files and directories whose names begin with a
+ # period. This includes directories used by version control systems such
+ # as Subversion or Git to store control files.
+ location ~ (^|/)\. {
+ return 403;
+ }
+
+ location / {
+ # This is cool because no php is touched for static content
+ try_files $uri @rewrite;
+ }
+
+ location ~* /update.php*/.*$ {
+ # You have 2 options here
+ # For D7 and above:
+ # Clean URLs are handled in drupal_environment_initialize().
+ rewrite ^ /update.php;
+ # For Drupal 6 and bwlow:
+ # Some modules enforce no slash (/) at the end of the URL
+ # Else this rewrite block wouldn't be needed (GlobalRedirect)
+ #rewrite ^/(.*)$ /index.php?q=$1;
+ }
+
+ location @rewrite {
+ # You have 2 options here
+ # For D7 and above:
+ # Clean URLs are handled in drupal_environment_initialize().
+ rewrite ^ /index.php;
+ # For Drupal 6 and bwlow:
+ # Some modules enforce no slash (/) at the end of the URL
+ # Else this rewrite block wouldn't be needed (GlobalRedirect)
+ #rewrite ^/(.*)$ /index.php?q=$1;
+ }
+
+ location ~ \.php$ {
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ #NOTE: You should have "cgi.fix_pathinfo = 0;" in php.ini
+ include fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $request_filename;
+ fastcgi_intercept_errors on;
+ #fastcgi_pass unix:/tmp/phpfpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+
+ # Fighting with Styles? This little gem is amazing.
+ # This is for D6
+ #location ~ ^/sites/.*/files/imagecache/ {
+ # This is for D7 and D8
+ location ~ ^/sites/.*/files/styles/ {
+ try_files $uri @rewrite;
+ }
+
+ location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ {
+ expires max;
+ #log_not_found off;
+ }
+
+}
diff --git a/tools/conf/etc/nginx/sites/flyspray.conf b/tools/conf/etc/nginx/sites/flyspray.conf
new file mode 100644
index 0000000..80b5530
--- /dev/null
+++ b/tools/conf/etc/nginx/sites/flyspray.conf
@@ -0,0 +1,40 @@
+
+server {
+ listen 443 ssl;
+ # listen [::]:443 ssl;
+
+ server_name c9.core;
+
+ root /srv/www/default/flyspray;
+ index index.php;
+
+ location /ports {
+ alias /var/ports/ports;
+ autoindex on;
+ }
+
+ location /distfiles {
+ alias /var/ports/distfiles;
+ autoindex on;
+ }
+
+ location /packages {
+ root /var/ports/packages;
+ autoindex off;
+ }
+
+
+ location / {
+ try_files $uri $uri/ index.php$is_args$args;
+ }
+
+ location ~ \.php$ {
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index index.php;
+ try_files $uri /index.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+}
diff --git a/tools/conf/etc/nginx/sites/laravel.conf b/tools/conf/etc/nginx/sites/laravel.conf
new file mode 100644
index 0000000..e563a3e
--- /dev/null
+++ b/tools/conf/etc/nginx/sites/laravel.conf
@@ -0,0 +1,28 @@
+server {
+ listen 443 ssl;
+ # listen [::]:443 ssl;
+
+ root /srv/www/default/laravel/public;
+ server_name c9.core
+
+ location /c9-doc {
+ alias /srv/www/c9-doc;
+ index index.html;
+ autoindex on;
+ }
+
+ location / {
+ try_files $uri $uri/ /index.php$is_args$args;
+ }
+
+ location ~ \.php$ {
+ index index.php;
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index index.php;
+ # try_files $uri /index.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
+ }
+}
diff --git a/tools/conf/etc/rc.d/blan b/tools/conf/etc/rc.d/blan
new file mode 100755
index 0000000..f75d272
--- /dev/null
+++ b/tools/conf/etc/rc.d/blan
@@ -0,0 +1,63 @@
+#!/bin/sh
+#
+# /etc/rc.d/net: start/stop network interface
+#
+
+DEV="br0"
+PHY="enp8s0"
+
+ADDR=10.0.0.1
+NET=10.0.0.0
+MASK=24
+GTW=10.0.0.1
+NTAPS=$((`/usr/bin/nproc`-1))
+
+case $1 in
+ start)
+ /sbin/ip link add name ${DEV} type bridge
+ /sbin/ip link set dev ${DEV} up
+
+ /bin/sleep 0.2s
+ /sbin/ip route flush dev ${PHY}
+ /sbin/ip addr flush dev ${PHY}
+ /sbin/ip link set dev ${PHY} master ${DEV}
+
+ /sbin/ip addr add ${ADDR}/${MASK} dev ${DEV} broadcast +
+
+ for i in `/usr/bin/seq $NTAPS`
+ do
+ TAP="tap$i"
+ echo $TAP
+ /sbin/ip tuntap add ${TAP} mode tap group kvm
+ /sbin/ip link set ${TAP} up
+ /bin/sleep 0.2s
+ #brctl addif $switch $1
+ /sbin/ip link set ${TAP} master ${DEV}
+ done
+
+ exit 0
+ ;;
+ stop)
+
+ for i in `/usr/bin/seq $NTAPS`
+ do
+ TAP="tap$i"
+ /sbin/ip link del ${TAP}
+ echo $TAP
+ done
+
+ /sbin/ip link set dev ${DEV} down
+ /sbin/ip route flush dev ${DEV}
+ /sbin/ip link del ${DEV}
+ exit 0
+ ;;
+ restart)
+ $0 stop
+ $0 start
+ ;;
+ *)
+ echo "Usage: $0 [start|stop|restart]"
+ ;;
+esac
+
+# End of file
diff --git a/tools/conf/etc/rc.d/postgresql b/tools/conf/etc/rc.d/postgresql
new file mode 100755
index 0000000..5f0762a
--- /dev/null
+++ b/tools/conf/etc/rc.d/postgresql
@@ -0,0 +1,16 @@
+#
+# /etc/rc.d/postgresql: start, stop or restart PostgreSQL server postmaster
+#
+
+PG_DATA=/srv/pgsql/data
+
+case "$1" in
+ start|stop|status|restart|reload)
+ sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/postgresql "$1"
+ ;;
+ *)
+ echo "usage: $0 start|stop|restart|reload|status"
+ ;;
+esac
+
+# End of file
diff --git a/tools/conf/srv/pgsql/data/pg_hba.conf b/tools/conf/srv/pgsql/data/pg_hba.conf
new file mode 100644
index 0000000..55ce3f3
--- /dev/null
+++ b/tools/conf/srv/pgsql/data/pg_hba.conf
@@ -0,0 +1,96 @@
+# PostgreSQL Client Authentication Configuration File
+# ===================================================
+#
+# Refer to the "Client Authentication" section in the PostgreSQL
+# documentation for a complete description of this file. A short
+# synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which PostgreSQL user names they can use, which
+# databases they can access. Records take one of these forms:
+#
+# local DATABASE USER METHOD [OPTIONS]
+# host DATABASE USER ADDRESS METHOD [OPTIONS]
+# hostssl DATABASE USER ADDRESS METHOD [OPTIONS]
+# hostnossl DATABASE USER ADDRESS METHOD [OPTIONS]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket,
+# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a
+# plain TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", "samerole", "replication", a
+# database name, or a comma-separated list thereof. The "all"
+# keyword does not match "replication". Access to replication
+# must be enabled in a separate record (see example below).
+#
+# USER can be "all", a user name, a group name prefixed with "+", or a
+# comma-separated list thereof. In both the DATABASE and USER fields
+# you can also write a file name prefixed with "@" to include names
+# from a separate file.
+#
+# ADDRESS specifies the set of hosts the record matches. It can be a
+# host name, or it is made up of an IP address and a CIDR mask that is
+# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
+# specifies the number of significant bits in the mask. A host name
+# that starts with a dot (.) matches a suffix of the actual host name.
+# Alternatively, you can write an IP address and netmask in separate
+# columns to specify the set of hosts. Instead of a CIDR-address, you
+# can write "samehost" to match any of the server's own IP addresses,
+# or "samenet" to match any address in any subnet that the server is
+# directly connected to.
+#
+# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi",
+# "ident", "peer", "pam", "ldap", "radius" or "cert". Note that
+# "password" sends passwords in clear text; "md5" is preferred since
+# it sends encrypted passwords.
+#
+# OPTIONS are a set of options for the authentication in the format
+# NAME=VALUE. The available options depend on the different
+# authentication methods -- refer to the "Client Authentication"
+# section in the documentation for a list of which options are
+# available for which authentication methods.
+#
+# Database and user names containing spaces, commas, quotes and other
+# special characters must be quoted. Quoting one of the keywords
+# "all", "sameuser", "samerole" or "replication" makes the name lose
+# its special character, and just match a database or username with
+# that name.
+#
+# This file is read on server startup and when the postmaster receives
+# a SIGHUP signal. If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect. You can
+# use "pg_ctl reload" to do that.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records. In that case you will also need to make PostgreSQL
+# listen on a non-local interface via the listen_addresses
+# configuration parameter, or via the -i or -h command line switches.
+
+# CAUTION: Configuring the system for local "trust" authentication
+# allows any local user to connect as any PostgreSQL user, including
+# the database superuser. If you do not trust all your local users,
+# use another authentication method.
+
+
+# TYPE DATABASE USER ADDRESS METHOD
+
+# "local" is for Unix domain socket connections only
+#local all all trust
+local all postgres ident
+# IPv4 local connections:
+host all all 127.0.0.1/32 trust
+#hostssl all all 192.168.0.0/32 md5
+
+# IPv6 local connections:
+#host all all ::1/128 trust
+# Allow replication connections from localhost, by a user with the
+# replication privilege.
+#local replication postgres trust
+#host replication postgres 127.0.0.1/32 trust
+#host replication postgres ::1/128 trust
diff --git a/tools/conf/srv/pgsql/data/postgresql.conf b/tools/conf/srv/pgsql/data/postgresql.conf
new file mode 100644
index 0000000..df3525c
--- /dev/null
+++ b/tools/conf/srv/pgsql/data/postgresql.conf
@@ -0,0 +1,623 @@
+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+# name = value
+#
+# (The "=" is optional.) Whitespace may be used. Comments are introduced with
+# "#" anywhere on a line. The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal. If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload". Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on". Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units: kB = kilobytes Time units: ms = milliseconds
+# MB = megabytes s = seconds
+# GB = gigabytes min = minutes
+# TB = terabytes h = hours
+# d = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir' # use data in another directory
+ # (change requires restart)
+#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
+ # (change requires restart)
+#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
+ # (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+#external_pid_file = '' # write an extra PID file
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+#listen_addresses = 'localhost' # what IP address(es) to listen on;
+ # comma-separated list of addresses;
+ # defaults to 'localhost'; use '*' for all
+ # (change requires restart)
+#port = 5432 # (change requires restart)
+max_connections = 100 # (change requires restart)
+#superuser_reserved_connections = 3 # (change requires restart)
+#unix_socket_directories = '/tmp' # comma-separated list of directories
+ # (change requires restart)
+#unix_socket_group = '' # (change requires restart)
+#unix_socket_permissions = 0777 # begin with 0 to use octal notation
+ # (change requires restart)
+#bonjour = off # advertise server via Bonjour
+ # (change requires restart)
+#bonjour_name = '' # defaults to the computer name
+ # (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min # 1s-600s
+ssl = on # (change requires restart)
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+ # (change requires restart)
+#ssl_prefer_server_ciphers = on # (change requires restart)
+#ssl_ecdh_curve = 'prime256v1' # (change requires restart)
+ssl_cert_file = '/etc/ssl/certs/pg.crt' # (change requires restart)
+ssl_key_file = '/etc/ssl/keys/pg.key' # (change requires restart)
+#ssl_ca_file = '' # (change requires restart)
+#ssl_crl_file = '' # (change requires restart)
+password_encryption = on
+#db_user_namespace = off
+#row_security = on
+
+# GSSAPI using Kerberos
+#krb_server_keyfile = ''
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
+ # 0 selects the system default
+#tcp_keepalives_count = 0 # TCP_KEEPCNT;
+ # 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 128MB # min 128kB
+ # (change requires restart)
+#huge_pages = try # on, off, or try
+ # (change requires restart)
+#temp_buffers = 8MB # min 800kB
+#max_prepared_transactions = 0 # zero disables the feature
+ # (change requires restart)
+# Caution: it is not advisable to set max_prepared_transactions nonzero unless
+# you actively intend to use prepared transactions.
+#work_mem = 4MB # min 64kB
+#maintenance_work_mem = 64MB # min 1MB
+#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
+#max_stack_depth = 2MB # min 100kB
+dynamic_shared_memory_type = sysv # the default is the first option
+ # supported by the operating system:
+ # posix
+ # sysv
+ # windows
+ # mmap
+ # use none to disable dynamic shared memory
+
+# - Disk -
+
+#temp_file_limit = -1 # limits per-session temp file space
+ # in kB, or -1 for no limit
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000 # min 25
+ # (change requires restart)
+#shared_preload_libraries = '' # (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0 # 0-100 milliseconds
+#vacuum_cost_page_hit = 1 # 0-10000 credits
+#vacuum_cost_page_miss = 10 # 0-10000 credits
+#vacuum_cost_page_dirty = 20 # 0-10000 credits
+#vacuum_cost_limit = 200 # 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms # 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
+#max_worker_processes = 8
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal # minimal, archive, hot_standby, or logical
+ # (change requires restart)
+#fsync = on # turns forced synchronization on or off
+#synchronous_commit = on # synchronization level;
+ # off, local, remote_write, or on
+#wal_sync_method = fsync # the default is the first option
+ # supported by the operating system:
+ # open_datasync
+ # fdatasync (default on Linux)
+ # fsync
+ # fsync_writethrough
+ # open_sync
+#full_page_writes = on # recover from partial page writes
+#wal_compression = off # enable compression of full-page writes
+#wal_log_hints = off # also do full page writes of non-critical updates
+ # (change requires restart)
+#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
+ # (change requires restart)
+#wal_writer_delay = 200ms # 1-10000 milliseconds
+
+#commit_delay = 0 # range 0-100000, in microseconds
+#commit_siblings = 5 # range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_timeout = 5min # range 30s-1h
+#max_wal_size = 1GB
+#min_wal_size = 80MB
+#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s # 0 disables
+
+# - Archiving -
+
+#archive_mode = off # enables archiving; off, on, or always
+ # (change requires restart)
+#archive_command = '' # command to use to archive a logfile segment
+ # placeholders: %p = path of file to archive
+ # %f = file name only
+ # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0 # force a logfile segment switch after this
+ # number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Server(s) -
+
+# Set these on the master and on any standby that will send replication data.
+
+#max_wal_senders = 0 # max number of walsender processes
+ # (change requires restart)
+#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
+#wal_sender_timeout = 60s # in milliseconds; 0 disables
+
+#max_replication_slots = 0 # max number of replication slots
+ # (change requires restart)
+#track_commit_timestamp = off # collect timestamp of transaction commit
+ # (change requires restart)
+
+# - Master Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = '' # standby servers that provide sync rep
+ # comma-separated list of application_name
+ # from standby(s); '*' = all
+#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+# These settings are ignored on a master server.
+
+#hot_standby = off # "on" allows queries during recovery
+ # (change requires restart)
+#max_standby_archive_delay = 30s # max delay before canceling queries
+ # when reading WAL from archive;
+ # -1 allows indefinite delay
+#max_standby_streaming_delay = 30s # max delay before canceling queries
+ # when reading streaming WAL;
+ # -1 allows indefinite delay
+#wal_receiver_status_interval = 10s # send replies at least this often
+ # 0 disables
+#hot_standby_feedback = off # send info from standby to prevent
+ # query conflicts
+#wal_receiver_timeout = 60s # time that receiver waits for
+ # communication from master
+ # in milliseconds; 0 disables
+#wal_retrieve_retry_interval = 5s # time to wait before retrying to
+ # retrieve WAL after a failed attempt
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0 # measured on an arbitrary scale
+#random_page_cost = 4.0 # same scale as above
+#cpu_tuple_cost = 0.01 # same scale as above
+#cpu_index_tuple_cost = 0.005 # same scale as above
+#cpu_operator_cost = 0.0025 # same scale as above
+#effective_cache_size = 4GB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5 # range 1-10
+#geqo_pool_size = 0 # selects default based on effort
+#geqo_generations = 0 # selects default based on effort
+#geqo_selection_bias = 2.0 # range 1.5-2.0
+#geqo_seed = 0.0 # range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100 # range 1-10000
+#constraint_exclusion = partition # on, off, or partition
+#cursor_tuple_fraction = 0.1 # range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8 # 1 disables collapsing of explicit
+ # JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr' # Valid values are combinations of
+ # stderr, csvlog, syslog, and eventlog,
+ # depending on platform. csvlog
+ # requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off # Enable capturing of stderr and csvlog
+ # into log files. Required to be on for
+ # csvlogs.
+ # (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log' # directory where log files are written,
+ # can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
+ # can include strftime() escapes
+#log_file_mode = 0600 # creation mode for log files,
+ # begin with 0 to use octal notation
+#log_truncate_on_rotation = off # If on, an existing log file with the
+ # same name as the new log file will be
+ # truncated rather than appended to.
+ # But such truncation only occurs on
+ # time-driven rotation, not on restarts
+ # or size-driven rotation. Default is
+ # off, meaning append to existing files
+ # in all cases.
+#log_rotation_age = 1d # Automatic rotation of logfiles will
+ # happen after that time. 0 disables.
+#log_rotation_size = 10MB # Automatic rotation of logfiles will
+ # happen after that much log output.
+ # 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+# This is only relevant when logging to eventlog (win32):
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#client_min_messages = notice # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # log
+ # notice
+ # warning
+ # error
+
+#log_min_messages = warning # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic
+
+#log_min_error_statement = error # values in order of decreasing detail:
+ # debug5
+ # debug4
+ # debug3
+ # debug2
+ # debug1
+ # info
+ # notice
+ # warning
+ # error
+ # log
+ # fatal
+ # panic (effectively off)
+
+#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
+ # and their durations, > 0 logs only
+ # statements running at least this number
+ # of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default # terse, default, or verbose messages
+#log_hostname = off
+#log_line_prefix = '' # special values:
+ # %a = application name
+ # %u = user name
+ # %d = database name
+ # %r = remote host and port
+ # %h = remote host
+ # %p = process ID
+ # %t = timestamp without milliseconds
+ # %m = timestamp with milliseconds
+ # %i = command tag
+ # %e = SQL state
+ # %c = session ID
+ # %l = session line number
+ # %s = session start timestamp
+ # %v = virtual transaction ID
+ # %x = transaction ID (0 if none)
+ # %q = stop here in non-session
+ # processes
+ # %% = '%'
+ # e.g. '<%u%%%d> '
+#log_lock_waits = off # log lock waits >= deadlock_timeout
+#log_statement = 'none' # none, ddl, mod, all
+#log_replication_commands = off
+#log_temp_files = -1 # log temporary files equal or larger
+ # than the specified size in kilobytes;
+ # -1 disables, 0 logs all temp files
+log_timezone = 'Portugal'
+
+
+# - Process Title -
+
+#cluster_name = '' # added to process titles if nonempty
+ # (change requires restart)
+#update_process_title = on
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_io_timing = off
+#track_functions = none # none, pl, all
+#track_activity_query_size = 1024 # (change requires restart)
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on # Enable autovacuum subprocess? 'on'
+ # requires track_counts to also be on.
+#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
+ # their durations, > 0 logs only
+ # actions running at least this number
+ # of milliseconds.
+#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
+ # (change requires restart)
+#autovacuum_naptime = 1min # time between autovacuum runs
+#autovacuum_vacuum_threshold = 50 # min number of row updates before
+ # vacuum
+#autovacuum_analyze_threshold = 50 # min number of row updates before
+ # analyze
+#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
+ # (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
+ # before forced vacuum
+ # (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for
+ # autovacuum, in milliseconds;
+ # -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
+ # autovacuum, -1 means use
+ # vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user", public' # schema names
+#default_tablespace = '' # a tablespace name, '' uses the default
+#temp_tablespaces = '' # a list of tablespace names, '' uses
+ # only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0 # in milliseconds, 0 is disabled
+#lock_timeout = 0 # in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_freeze_table_age = 150000000
+#bytea_output = 'hex' # hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+#gin_fuzzy_search_limit = 0
+#gin_pending_list_limit = 4MB
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+timezone = 'Portugal'
+#timezone_abbreviations = 'Default' # Select the set of available time zone
+ # abbreviations. Currently, there are
+ # Default
+ # Australia (historical usage)
+ # India
+ # You can create your own file in
+ # share/timezonesets/.
+#extra_float_digits = 0 # min -15, max 3
+#client_encoding = sql_ascii # actually, defaults to database
+ # encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'C' # locale for system error message
+ # strings
+lc_monetary = 'C' # locale for monetary formatting
+lc_numeric = 'C' # locale for number formatting
+lc_time = 'C' # locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+#session_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+#max_pred_locks_per_transaction = 64 # min 10
+ # (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding # on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#operator_precedence_warning = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off # terminate session on any error?
+#restart_after_crash = on # reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf.
+
+#include_dir = 'conf.d' # include files ending in '.conf' from
+ # directory 'conf.d'
+#include_if_exists = 'exists.conf' # include file only if it exists
+#include = 'special.conf' # include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here
diff --git a/tools/index.html b/tools/index.html
index b721f73..d20ccfa 100644
--- a/tools/index.html
+++ b/tools/index.html
@@ -68,19 +68,25 @@
<h2>System Administration</h2>
<ul>
- <li><a href="network.html">Network</a>
+ <li><a href="network.html">Network Tools</a>
<ul>
- <li><a href="dnsmasq.html">1. Dnscrypt and Dnsmasq</a></li>
- <li><a href="tcpdump.html">2. Tcpdump</a></li>
- <li><a href="wireless.html">Wireless</a></li>
+ <li><a href="dnsmasq.html">Dnscrypt and Dnsmasq</a></li>
+ <li><a href="tcpdump.html">Tcpdump</a></li>
<li><a href="nmap.html">Nmap</a></li>
+ <li><a href="wireless.html">Wireless</a></li>
</ul>
</li>
<li><a href="storage.html">Storage</a>
<ul>
- <li><a href="storage.html#mv">Moving partitions</a></li>
- <li><a href="storage.html#lvm">LVM</a></li>
- <li><a href="storage.html#btrfs">BTRFS</a></li>
+ <li><a href="lvm.html">LVM</a>
+ <ul>
+ <li><a href="lvm.html#lvmpart">1. LVM partition</a></li>
+ <li><a href="lvm.html#pv">2. Create physical volume</a></li>
+ <li><a href="lvm.html#vg">3. Create volume group</a></li>
+ <li><a href="lvm.html#lv">4. Create logical volume</a></li>
+ <li><a href="lvm.html#maint">5. Maintenance</a></li>
+ </ul>
+ </li>
</ul>
</li>
<li><a href="syslog-ng.html">Syslog-ng</a>
@@ -120,39 +126,39 @@
<li>
<a href="openssh.html">OpenSSH</a>
<ul>
- <li><a href="openssh.html#sshd">Server</a></li>
- <li><a href="openssh.html#sshdconf">Configure Server</a></li>
- <li><a href="openssh.html#ssh">Client</a></li>
- <li><a href="openssh.html#reverse">Reverse connection</a></li>
+ <li><a href="openssh.html#sshd">1. Server</a></li>
+ <li><a href="openssh.html#sshdconf">2. Configure Server</a></li>
+ <li><a href="openssh.html#ssh">3. Client</a></li>
+ <li><a href="openssh.html#reverse">4. Reverse connection</a></li>
</ul>
</li>
<li><a href="gitolite.html">Gitolite</a>
<ul>
- <li><a href="gitolite.html#install">Install Gitolite</a></li>
- <li><a href="gitolite.html#config">Configure Gitolite</a></li>
- <li><a href="gitolite.html#admin">Gitolite Administration</a></li>
- <li><a href="gitolite.html#hooks">Gitolite Hooks</a></li>
+ <li><a href="gitolite.html#install">1. Install Gitolite</a></li>
+ <li><a href="gitolite.html#config">2. Configure Gitolite</a></li>
+ <li><a href="gitolite.html#admin">3. Gitolite Administration</a></li>
+ <li><a href="gitolite.html#hooks">4. Gitolite Hooks</a></li>
</ul>
</li>
<li><a href="postgresql.html">Postgresql</a>
<ul>
- <li><a href="postgresql.html#install">Install Postgresql</a></li>
- <li><a href="postgresql.html#config">Configure Server</a></li>
- <li><a href="postgresql.html#createuser">Create User</a></li>
- <li><a href="postgresql.html#createdb">Create Database</a></li>
- <li><a href="postgresql.html#dropdb">Drop Database</a></li>
- <li><a href="postgresql.html#dropuser">Drop User</a></li>
- <li><a href="postgresql.html#psql">Psql</a></li>
+ <li><a href="postgresql.html#install">1. Install Postgresql</a></li>
+ <li><a href="postgresql.html#config">2. Configure Server</a></li>
+ <li><a href="postgresql.html#createuser">3. Create User</a></li>
+ <li><a href="postgresql.html#createdb">4. Create Database</a></li>
+ <li><a href="postgresql.html#dropdb">5. Drop Database</a></li>
+ <li><a href="postgresql.html#dropuser">6. Drop User</a></li>
+ <li><a href="postgresql.html#psql">7. Psql</a></li>
</ul>
</li>
<li><a href="nginx.html">Nginx</a>
<ul>
- <li><a href="nginx.html#install">Install Nginx</a></li>
- <li><a href="nginx.html#logs">Logs</a></li>
- <li><a href="nginx.html#userdir">User Directory</a></li>
- <li><a href="nginx.html#certs">Certificates</a></li>
- <li><a href="nginx.html#nginxconf">Nginx Configuration</a></li>
- <li><a href="nginx.html#server">Laravel Server</a></li>
+ <li><a href="nginx.html#install">1. Install Nginx</a></li>
+ <li><a href="nginx.html#certs">2. Certificates</a></li>
+ <li><a href="nginx.html#nginxconf">3. Nginx Configuration</a></li>
+ <li><a href="nginx.html#server">4. Server with PHP</a></li>
+ <li><a href="nginx.html#userdir">5. User Directory</a></li>
+ <li><a href="nginx.html#logs">6. Logs</a></li>
</ul>
</li>
</ul>
diff --git a/tools/lvm.html b/tools/lvm.html
new file mode 100644
index 0000000..8b1624a
--- /dev/null
+++ b/tools/lvm.html
@@ -0,0 +1,151 @@
+<!DOCTYPE html>
+<html dir="ltr" lang="en">
+ <head>
+ <meta charset='utf-8'>
+ <title>LVM</title>
+ </head>
+ <body>
+
+ <a href="index.html">Tools Index</a>
+
+ <h1>LVM</h1>
+
+ <p>Read <a href="https://raid.wiki.kernel.org/index.php/RAID_setup">Raid Setup</a>,
+ the only thing you will need outside system is:
+ "Patience, Pizza, and your favorite caffeinated beverage.".
+ <a href="https://wiki.archlinux.org/index.php/Software_RAID_and_LVM">Arch Wiki</a>
+ article about Sofware RAID and LVM.</p>
+
+ <p>Basic idea behind RAID is to deal with independent disks
+ as an array of drives. Raid 0 uses two or more disks as one,
+ with performance gains without fault-tolerance. From raid 1
+ to 6 they offer diferent fault tolerance mechanisms.</p>
+
+ <p>LVM or Logic Volume Manager bring one more layer, read
+ <a href="http://www.tuxradar.com/content/lvm-made-easy">Lvm made easy</a>.
+ Partitions under lvm are easy to be resized, moved and there is
+ a tool to help encrypt. There is more freedom to name physical
+ disk names exp; production, development, backups...</p>
+
+
+ <p>Until now "from install" there is only one partition,
+ it is good idea to have a system with diferent partitions for each
+ propos. If is a "fresh install";</p>
+
+ <pre>
+ # cd /iso/crux/opt/
+ # pkgadd lvm2#2.02.107-1.pkg.tar.xz
+ #
+ </pre>
+
+ <h2 id="lvmpart">1. LVM Partition</h2>
+
+ <p>Create a LVM partition, fdisk should
+ show something like this;</p>
+
+ <pre>
+ # parted /dev/sda
+ </pre>
+
+ <p>I use defaults unless to define system partition last sector,
+ where in this example is size, +80G</p>
+
+
+ <h2 id="pv">2. Create physical volume</h2>
+
+ <pre>
+ # pvcreate /dev/sdb3
+ Physical volume "/dev/sdb3" successfully created
+ </pre>
+
+ <h2 id="vg">3. Create volume group</h2>
+
+ <pre>
+ # vgcreate vg_system /dev/sdb3
+ Volume group "vg_system" successfully created
+ # vgcreate homevg /dev/sdb4
+ Volume group "homevg" successfully created
+ #
+ </pre>
+
+ <h3>3.1. Search Volume Groups</h3>
+
+ <pre>
+ # vgscan
+ Reading all physical volumes. This may take a while...
+ Found volume group "homevg" using metadata type lvm2
+ Found volume group "vg_system" using metadata type lvm2
+ #
+ </pre>
+
+ <h2 id="lv">4. Create logical volume</h2>
+
+ <pre>
+ # lvcreate -L 15G -n distfileslv vg_system
+ Logical volume "distfileslv" created.
+ # lvcreate -L 8G -n packageslv vg_system
+ Logical volume "packageslv" created.
+ # lvcreate -L 4G -n swaplv vg_system
+ Logical volume "swaplv" created.
+ # lvcreate -L 80G -n homelv homevg
+ Logical volume "homelv" created.
+ #
+ </pre>
+
+ <pre>
+ # mkfs.ext4 /dev/vg_system/distfileslv
+ # mkfs.ext4 /dev/vg_system/packageslv
+ # mkswap /dev/vg_system/swaplv
+ # mkfs.ext4 /dev/homevg/homelv
+ </pre>
+
+ <h3>4.1. Activate Deactivate</h3>
+
+ <p>Deactivate logical volumes;</p>
+
+ <pre>
+ # lvchange -a -n /dev/vg_system/packageslv
+ # lvchange -a -n /dev/vg_system/distfileslv
+ # swapoff /dev/vg_system/sawplv
+ # lvchange -a -n /dev/vg_system/swaplv
+ </pre>
+
+ <p>Deactivate volume group;</p>
+
+ <pre>
+ # vgchange -a n vg_system
+ 0 logical volume(s) in volume group "vg_system" now active
+ #
+ </pre>
+
+ <p>Activate volume group;</p>
+ <pre>
+ # vgchange -a y vg_system
+ 3 logical volume(s) in volume group "vg_system" now active
+ #
+ </pre>
+
+ <h2 id="maint">5. Maintenance</h2>
+
+ <pre>
+ # smartctl -t long /dev/sdb1
+ # smartctl -a /dev/sdb1 | less
+ </pre>
+
+ <p><a href="https://wiki.archlinux.org/index.php/Badblocks">Non Destructive Test;</a></p>
+
+ <pre>
+ # badblocks -nsv /dev/sdb1
+ </pre>
+
+ <h2 id="encrypt">7. Encryption</h2>
+
+ <a href="index.html">Tools Index</a>
+ <p>
+ This is part of the c9-doc Manual.
+ Copyright (C) 2016
+ c9 team.
+ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+ for copying conditions.</p>
+ </body>
+</html>
diff --git a/tools/network.html b/tools/network.html
new file mode 100644
index 0000000..5e4a481
--- /dev/null
+++ b/tools/network.html
@@ -0,0 +1,46 @@
+<!DOCTYPE html>
+<html dir="ltr" lang="en">
+ <head>
+ <meta charset='utf-8'>
+ <title>Network Tools</title>
+ </head>
+ <body>
+
+ <a href="index.html">Tools Index</a>
+
+ <h1>Network Tools</h1>
+
+ <h2 id="bridge">Bridges</h2>
+
+ <p>See <a href="conf/etc/rc.d/blan">/etc/rc.d/blan</a> on
+ how to create interfaces at startup or as source to do it
+ in automatic way;</p>
+
+ <pre>
+ DEV="br0"
+ PHY="enp8s0"
+ </pre>
+
+ <pre>
+ # ip link add name ${DEV} type bridge
+ # ip link set dev ${DEV} up
+ </pre>
+ <pre>
+ # ip route flush dev ${PHY}
+ # ip addr flush dev ${PHY}
+ # ip link set dev ${PHY} master ${DEV}
+ </pre>
+
+ <pre>
+ # ip addr add ${ADDR}/${MASK} dev ${DEV} broadcast +
+ </pre>
+
+ <a href="index.html">Tools Index</a>
+ <p>This is part of the c9 Manual.
+ Copyright (C) 2016
+ c9 team.
+ See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+ for copying conditions.</p>
+
+ </body>
+</html>
diff --git a/tools/nginx.html b/tools/nginx.html
index 8fe632e..0ded2b6 100644
--- a/tools/nginx.html
+++ b/tools/nginx.html
@@ -7,9 +7,9 @@
<body>
<a href="index.html">Tools Index</a>
- <h1>1. Nginx</h1>
+ <h1>Nginx</h1>
- <h2 id="install">1.1. Install Nginx</h2>
+ <h2 id="install">1. Install Nginx</h2>
<pre>
$ prt-get depinst nginx
@@ -21,17 +21,16 @@
UID=xxxxx-xxx-xxx-xxx-xxxxxxxx /srv/www ext4 defaults,nosuid,noexec,nodev,noatime 1 2
</pre>
- <p>Remove nginx user or group, system defines www user and group;</p>
+ <p>Add user nginx to www group;</p>
<pre>
- # userdel nginx
- # groupdel nginx
+ # usermod -a -G www nginx
</pre>
- <p>Change default home directory of www user;</p>
+ <p>Change default home directory of nginx user;</p>
<pre>
- # usermod -m -d /srv/www www
+ # usermod -m -d /srv/www nginx
</pre>
<p>Create configuration directory's for better organization;</p>
@@ -42,44 +41,11 @@
$ sudo mkdir /etc/nginx/sites
</pre>
- <h2 id="logs">1.2. Logs</h2>
-
- <pre>
- $ sudo grep "login" /var/log/nginx/access.log
- $ sudo grep "etc/passwd" /var/log/nginx/access.log
- $ sudo egrep -i "denied|error|warn" /var/log/nginx/error.log
- </pre>
-
- <h2 id="userdir">1.3. User Directory</h2>
-
- <p><a href="http://wiki.nginx.org/UserDir">Nginx Wiki UserDir</a></p>
-
- <pre>
- location ~ ^/~(.+?)(/.*)?$ {
- alias /home/$1/public_html$2;
- index index.html index.htm;
- autoindex on;
- }
- </pre>
-
- <p>Directories should have 644 or 664 and
- files chmod 755 or 775;</p>
-
- <pre>
- $ sudo find . -type f -print0 | xargs -0 chmod 644
- $ sudo find . -type d -print0 | xargs -0 chmod 755
- </pre>
-
- <h2 id="certs">1.4. Certificates</h2>
+ <h2 id="certs">2. Certificates</h2>
<p>Certificates allow a more secure connection. Lets create
self-signed certificate;</p>
- <pre>
- $ sudo mkdir /etc/nginx/ssl
- $ sudo cd /etc/nginx/ssl
- </pre>
-
<p>Create private key;</p>
<pre>
@@ -108,11 +74,11 @@
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [AU]:PT
- State or Province Name (full name) [Some-State]:Porto
+ State or Province Name (full name) [Some-State]:
Locality Name (eg, city) []:
Organization Name (eg, company) [Internet Widgits Pty Ltd]:
Organizational Unit Name (eg, section) []:
- Common Name (e.g. server FQDN or YOUR name) []:c13.nark.biz.tm
+ Common Name (e.g. server FQDN or YOUR name) []:core.privat-network.net
Email Address []:
Please enter the following 'extra' attributes
@@ -122,38 +88,54 @@
$
</pre>
+ <p>Having password is a good idea, but requires it every
+ time nginx is restarted. To remove;</p>
+
+ <pre>
+ $ sudo cp /etc/ssl/keys/nginx.key /etc/ssl/keys/nginx.key.pass
+ $ sudo openssl rsa -in /etc/ssl/keys/nginx.key.pass -out /etc/ssl/keys/nginx.key
+ </pre>
+
+ <pre>
+ Enter pass phrase for /etc/ssl/keys/nginx.key.pass:
+ writing RSA key
+ </pre>
+
+ <pre>
+ $ sudo chown nginx /etc/ssl/keys/nginx.key*
+ $ sudo chmod 0600 /etc/ssl/keys/nginx.key*
+ # chmod 644 /etc/ssl/certs/exim.cert
+ </pre>
+
<p>Sign SSL cetificate;</p>
<pre>
- $ sudo openssl x509 -req -days 365 -in /etc/ssl/certs/nginx.csr -signkey /etc/ssl/keys/nginx.key -out /etc/ssl/certs/nginx.crt
+ $ sudo openssl x509 -req -days 365 \
+ -in /etc/ssl/certs/nginx.csr \
+ -signkey /etc/ssl/keys/nginx.key \
+ -out /etc/ssl/certs/nginx.crt
+ </pre>
+
Signature ok
- subject=/C=PT/ST=Porto/O=Internet Widgits Pty Ltd/CN=c13.nark.biz.tm
+ subject=/C=PT/ST=Some-State/O=Internet Widgits Pty Ltd/CN=core.privat-network.net
Getting Private key
Enter pass phrase for /etc/ssl/keys/nginx.key:
- $
</pre>
- <h3>Remove Password</h3>
-
- <p>Having password is a good idea, but requires it every
- time nginx is restarted. To remove;</p>
-
<pre>
- $ sudo cp /etc/ssl/keys/nginx.key /etc/ssl/keys/nginx.key.org
- $ sudo openssl rsa -in /etc/ssl/keys/nginx.key.org -out /etc/ssl/keys/nginx.key
- Enter pass phrase for /etc/ssl/keys/nginx.key.org:
- writing RSA key
- $
+ $ sudo chown nginx:nginx /etc/ssl/keys/nginx.key*
+ $ sudo chmod 0600 /etc/ssl/keys/nginx.key*
+ $ sudo chmod 644 /etc/ssl/certs/nginx.cert
</pre>
- <h2 id="nginxconf">1.5. Nginx Configuration</h2>
+ <h2 id="nginxconf">3. Nginx Configuration</h2>
- <p><a href="http://wiki.nginx.org/Pitfalls">READ NGINX PITFALLS</a>,
+ <p>Read <a href="http://wiki.nginx.org/Pitfalls">nginx pitfalls</a>,
for more information about optimization
<a href="https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration">digitalocean</a>,
<p>Number of worker_processes must be equal or less than
- the number of available cpu cores</p>
+ the number of available cpu cores. This is set to auto.</p>
<pre>
$ nproc
@@ -168,36 +150,30 @@
1024
</pre>
- <p>Example of http block with ssl configured;</p>
+ <p>Example of http block with ssl configured;</p>
<pre>
#
- # /etc/nginx/nginx.conf
+ # /etc/nginx/nginx.conf - nginx server configuration
#
- user www;
- worker_processes 2;
- error_log /var/log/nginx/error.log info;
+ user nginx;
+ worker_processes auto;
+
+ error_log /var/log/nginx/error.log;
+
+ pid /var/run/nginx.pid;
+
events {
worker_connections 1024;
}
- http {
-
- include /etc/nginx/mime.types;
- default_type application/octet-stream;
-
- sendfile on;
- #tcp_nopush on;
- #keepalive_timeout 620;
- keepalive_timeout 65;
- client_body_timeout 12;
- client_header_timeout 12;
- # send_timeout 620;
- send_timeout 65;
+ http {
+ include mime.types;
+ default_type application/octet-stream;
##
# SSL Settings
@@ -209,25 +185,25 @@
ssl_certificate /etc/ssl/certs/nginx.crt;
ssl_certificate_key /etc/ssl/keys/nginx.key;
- ##
- # Logging Settings
- ##
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
- access_log /var/log/nginx/access.log combined;
- error_log /var/log/nginx/error.log;
+ access_log /var/log/nginx/access.log;
+ error_log /var/log/nginx/error.log;
- ##
- # Gzip Settings
- ##
+ sendfile on;
+ #tcp_nopush on;
- gzip on;
- gzip_disable "msie6";
+ keepalive_timeout 65;
+ client_body_timeout 12;
+ client_header_timeout 12;
+ send_timeout 65;
+
+ gzip on;
gzip_vary on;
- gzip_proxied any;
+ #gzip_proxied any;
gzip_comp_level 9;
# gzip_buffers 16 8k;
# gzip_http_version 1.1;
@@ -245,83 +221,150 @@
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*.conf;
+
}
- # End of file </pre>
+ # End of file
+ </pre>
+
+ <h2 id="server">4. Server with PHP</h2>
+ <p>To debug configurations check logs and;</p>
- <h2 id="server">1.6. Server with PHP</h2>
+ <pre>
+ nginx -V
+ </pre>
- check <a href "../conf/etc/nginx/">configuration directory</a>
- for more examples. Install php and composer that is required
- by Laravel;</p>
+ <h3>4.1. Setup PHP</h3>
- <h3>1.6.1. Setup PHP</h3>
+ <p> Install php and setup php.ini as development mode;</p>
<pre>
- $ prt-get depinst php php-fpm php-gd php-pdo-pgsql composer
+ $ sudo prt-get depinst php php-fpm php-gd php-pdo-pgsql php-postgresql
</pre>
<p>Setup php ini in development mode;<p/>
<pre>
- $ sudo cp /etc/php/php.ini-development php.ini
+ $ sudo cp /etc/php/php.ini-development /etc/php/php.ini
+ </pre>
+
+ <pre>
$ php --ini
Configuration File (php.ini) Path: /etc/php
Loaded Configuration File: /etc/php/php.ini
Scan for additional .ini files in: /etc/php/conf.d
Additional .ini files parsed: /etc/php/conf.d/extensions.ini,
/etc/php/conf.d/pdo_pgsql.ini
-
- $
</pre>
- <h3>1.6.2. Setup Virtual Host</h3>
+ <h3>4.2. Setup Virtual Host</h3>
+
+ <p>Server (virtual host) with pmwiki and flyspray, check
+ <a href="conf/etc/nginx/sites/">/etc/nginx/sites</a>
+ for more examples. Install pmwiki and flyspray;</p>
+
+ <pre>
+ $ sudo prt-get depinst pmwiki flyspray
+ </pre>
- <p>Server (virtual host) with Laravel,
- /etc/nginx/sites/<a href="../conf/etc/nginx/sites/laravel.conf">laravel.conf</a>;</p>
+ <p> This server is configured in a way that
+ root serves pmwiki and /tasks serves flyspray. In order to
+ flyspray to link correctly change index is needed;</p>
<pre>
server {
listen 443 ssl;
- listen [::]:443 ssl;
+ # listen [::]:443 ssl;
- root /srv/www/atom/public;
- server_name c13.nark.biz.tm;
- index index.html index.htm index.php;
+ server_name c9.core;
- charset utf-8;
+ root /srv/www/default;
- location / {
- try_files $uri $uri/ /index.php$is_args$args;
+ location /distfiles {
+ alias /usr/ports/distfiles;
}
- location = /favicon.ico { access_log off; log_not_found off; }
- location = /robots.txt { access_log off; log_not_found off; }
-
- access_log off;
- error_log /var/log/nginx/c13-nark-biz-tm-error.log error;
- sendfile off;
+ location /tasks {
+ index index.php;
+ alias /srv/www/default/flyspray;
+ try_files $uri $uri/ index.php$is_args$args;
+ }
- client_max_body_size 100m;
+ location ~ ^/tasks(.+\.php)$ {
+ alias /srv/www/default/flyspray;
- location ~ \.php$ {
fastcgi_split_path_info ^(.+\.php)(/.+)$;
- fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
- include fastcgi_params;
- fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
- fastcgi_intercept_errors off;
- fastcgi_buffer_size 16k;
- fastcgi_buffers 4 16k;
+ try_files $uri /index.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$1;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
}
- location ~ /\.ht {
- deny all;
+ location / {
+ alias /srv/www/default/pmwiki/;
+ index pmwiki.php
+ try_files $uri $uri/ /pmwiki.php$is_args$args;
+ }
+
+ location ~ \.php$ {
+ alias /srv/www/default/pmwiki;
+ fastcgi_split_path_info ^(.+\.php)(/.+)$;
+ fastcgi_index pmwiki.php;
+ try_files $uri /pmwiki.php =404;
+ include /etc/nginx/fastcgi_params;
+ fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+ # fastcgi_pass unix:/var/run/php5-fpm.sock;
+ fastcgi_pass 127.0.0.1:9000;
}
}
</pre>
+ <p>Change /srv/www/default/flyspray/index.php to;</p>
+
+ <pre>
+ &lt?php
+ /*
+ This is the main script that everything else is included
+ in. Mostly what it does is check the user permissions
+ to see what they have access to.
+ */
+ define('IN_FS', true);
+ $_SERVER['SCRIPT_NAME'] = "/bug/index.php";
+ require_once(dirname(__FILE__).'/header.php');
+ </pre>
+
+ <h2 id="userdir">5. User Directory</h2>
+
+ <p><a href="http://wiki.nginx.org/UserDir">Nginx Wiki UserDir</a></p>
+
+ <pre>
+ location ~ ^/~(.+?)(/.*)?$ {
+ alias /home/$1/public_html$2;
+ index index.html index.htm;
+ autoindex on;
+ }
+ </pre>
+
+ <p>Directories should have 644 or 664 and
+ files chmod 755 or 775;</p>
+
+ <pre>
+ $ sudo find . -type f -print0 | xargs -0 chmod 644
+ $ sudo find . -type d -print0 | xargs -0 chmod 755
+ </pre>
+
+ <h2 id="logs">6. Logs</h2>
+
+ <pre>
+ $ sudo grep "login" /var/log/nginx/access.log
+ $ sudo grep "etc/passwd" /var/log/nginx/access.log
+ $ sudo egrep -i "denied|error|warn" /var/log/nginx/error.log
+ </pre>
+
+
<a href="index.html">Tools Index</a>
<p>This is part of the c9-doc Manual.
diff --git a/tools/openssh.html b/tools/openssh.html
index ca504b2..3fe72e3 100644
--- a/tools/openssh.html
+++ b/tools/openssh.html
@@ -199,8 +199,8 @@
<p>If the server is on remote a remote machine;</p>
<pre>
- $ scp /home/bob/.ssh/gitolite.pub admin@nark.biz.tm:/home/admin/.ssh/
- bob@nark.biz.tm's password:
+ $ scp /home/bob/.ssh/gitolite.pub admin@core.privat-network.net:/home/admin/.ssh/
+ bob@core.privat-network.net's password:
gitolite.pub 100% 390 0.4KB/s 00:00
</pre>
@@ -223,25 +223,25 @@
<pre>
Host admin
- Hostname nark.biz.tm
+ Hostname core.privat-network.net
IdentityFile ~/.ssh/id_rsa
Port 2222
User admin
Host gitolite
- Hostname nark.biz.tm
+ Hostname core.privat-network.net
IdentityFile ~/.ssh/gitolite
Port 2222
User gitolite
Host box
- Hostname nark.biz.tm
+ Hostname core.privat-network.net
IdentityFile ~/.ssh/id_rsa
Port 2222
User bob
Host devbox
- Hostname nark.biz.tm
+ Hostname core.privat-network.net
IdentityFile ~/.ssh/id_rsa
Port 2222
User gitolite
diff --git a/tools/postgresql.html b/tools/postgresql.html
index e160ae2..0399ec6 100644
--- a/tools/postgresql.html
+++ b/tools/postgresql.html
@@ -11,53 +11,26 @@
<h1>Postgresql</h1>
- <h2 id="install">1.1. Install Postgresql</h2>
+ <h2 id="install">1. Install Postgresql</h2>
- <pre>
- $ prt-get depinst postgresql
- </pre>
-
- <p>Mount Point;</p>
+ <p>Install postgresql;</p>
<pre>
- # mkdir -p /srv/pgsql
- # mount /srv/pgsql
+ $ prt-get depinst postgresql
</pre>
- <p>Create user;</p>
-
<pre>
- # useradd -U -m -d /srv/pgsql -s /bin/false postgres
- useradd: warning: the home directory already exists.
- Not copying any file from skel directory into it.
+ # mkdir /srv/pgsql/
+ # touch /var/log/postgresql
+ # chown postgres:postgres /srv/pgsql /var/log/postgresql
+ # sudo -u postgres initdb -D /srv/pgsql/data
</pre>
- <pre>
- # passwd -l postgres
- passwd: password expiry information changed.
- # touch /var/log/pgsql
- # chown -R postgres:postgres /srv/pgsql /var/log/pgsql
- # ldconfig /user/lib/postgresql
- </pre>
+ <h2 id="config">2. Configure Server</h2>
- $ sudo -u postgres mkdir -p /srv/pgsql/data
- # sudo -u postgres touch /srv/pgsql/.psql_history
- </pre>
+ <h3>2.1. Init script</h3>
- <p>Create /etc/logrotate.d/postgres;</p>
-
- <pre>
- /var/log/pgsql {
- weekly
- compress
- delaycompress
- rotate 10
- notifempty
- create 660 postgres postgres
- }
- </pre>
-
- <p>Edit /etc/rc.d/postgresql;</p>
+ <p>Change <a href="conf/etc/rc.d/postgresql">/etc/rc.d/postgresql</a>;</p>
<pre>
#
@@ -65,26 +38,85 @@
#
PG_DATA=/srv/pgsql/data
- PG_HOME=/srv/pgsql
case "$1" in
- start|stop|status|restart|reload)
- (cd $PG_HOME && sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/pgsql "$1")
- ;;
- *)
- echo "usage: $0 start|stop|restart|reload|status"
- ;;
+ start|stop|status|restart|reload)
+ sudo -u postgres pg_ctl -D "$PG_DATA" -l /var/log/postgresql "$1"
+ ;;
+ *)
+ echo "usage: $0 start|stop|restart|reload|status"
+ ;;
esac
# End of file
</pre>
- <h2 id="config">1.2. Configure Server</h2>
+ <h3>2.2. Certificates</h3>
<pre>
- # sudo -u postgres initdb -D /srv/pgsql/data
+ $ sudo openssl genrsa -des3 -out /etc/ssl/keys/pg.key 2048
+ Password:
+ Generating RSA private key, 2048 bit long modulus
+ ..............................+++
+ ............+++
+ e is 65537 (0x10001)
+ Enter pass phrase for /etc/ssl/keys/pg.key:
+ Verifying - Enter pass phrase for /etc/ssl/keys/pg.key:
</pre>
+ <p>Create ceritificate signing request. For "Common Name"
+ provide domain name or ip address, leave challange password
+ and optional company name blank;</p>
+
+ <pre>
+ $ sudo openssl req -x509 -in server.req -text -key /etc/ssl/keys/pg.key -out /etc/ssl/certs/pg.crt
+
+ Enter pass phrase for /etc/ssl/keys/pg.key:
+ You are about to be asked to enter information that will be incorporated
+ into your certificate request.
+ What you are about to enter is what is called a Distinguished Name or a DN.
+ There are quite a few fields but you can leave some blank
+ For some fields there will be a default value,
+ If you enter '.', the field will be left blank.
+ -----
+ Country Name (2 letter code) [AU]:PT
+ State or Province Name (full name) [Some-State]:
+ Locality Name (eg, city) []:
+ Organization Name (eg, company) [Internet Widgits Pty Ltd]:
+ Organizational Unit Name (eg, section) []:
+ Common Name (e.g. server FQDN or YOUR name) []:core.privat-network.net
+ Email Address []:
+
+ Please enter the following 'extra' attributes
+ to be sent with your certificate request
+ A challenge password []:
+ An optional company name []:
+ $
+ </pre>
+
+ <p>Having password is a good idea, but requires it every
+ time pg is restarted. To remove;</p>
+
+ <pre>
+ $ sudo cp /etc/ssl/keys/pg.key /etc/ssl/keys/pg.key.pass
+ $ sudo openssl rsa \
+ -in /etc/ssl/keys/pg.key.pass \
+ -out /etc/ssl/keys/pg.key
+ </pre>
+
+ <pre>
+ Enter pass phrase for /etc/ssl/keys/pg.key.pass:
+ writing RSA key
+ </pre>
+
+ <pre>
+ $ sudo chown postgres:postgres /etc/ssl/keys/pg.key*
+ $ sudo chmod 0600 /etc/ssl/keys/pg.key*
+ $ sudo chmod 644 /etc/ssl/certs/pg.cert
+ </pre>
+
+ <h3>2.3. Super user password</h3>
+
<p>Create password for super user;</p>
<pre>
@@ -92,17 +124,31 @@
$ psql -U postgres
</pre>
- <p>Edit /pgsql/data/<a href="../conf/srv/pgsql/data/postgresql.conf">postgresql.conf</a>;</p>
+ <h3>2.4. Configure postgresql.conf</h3>
+
+ <p>Edit <a href="conf/srv/pgsql/data/postgresql.conf">/srv/pgsql/data/postgresql.conf</a>;</p>
<pre>
- log_destination = 'syslog' # Can specify multiple destinations
- syslog_facility='LOCAL0'
- syslog_ident='postgres'
- log_connections = on
- password_encryption=on
+ # - Security and Authentication -
+
+ #authentication_timeout = 1min # 1s-600s
+ ssl = on # (change requires restart)
+ #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+ # (change requires restart)
+ #ssl_prefer_server_ciphers = on # (change requires restart)
+ #ssl_ecdh_curve = 'prime256v1' # (change requires restart)
+ ssl_cert_file = '/etc/ssl/certs/pg.crt' # (change requires restart)
+ ssl_key_file = '/etc/ssl/keys/pg.key' # (change requires restart)
+ #ssl_ca_file = '' # (change requires restart)
+ #ssl_crl_file = '' # (change requires restart)
+ password_encryption = on
</pre>
- <p>Edit /srv/pgsql/data/<a href="../conf/srv/pgsql/data/pg_hba.conf">pg_hba.conf</a>;</p>
+ <h3>2.5. Configure pg_hba.conf</h3>
+
+ <p>Edit
+ <a href="conf/srv/pgsql/data/pg_hba.conf">/srv/pgsql/data/pg_hba.conf</a>;
+ </p>
<pre>
# TYPE DATABASE USER ADDRESS METHOD
@@ -111,7 +157,8 @@
#local all all trust
local all postgres ident
# IPv4 local connections:
- hostssl all all 127.0.0.1/32 md5
+ host all all 127.0.0.1/32 trust
+ #hostssl all all 192.168.0.0/32 md5
# IPv6 local connections:
#host all all ::1/128 trust
# Allow replication connections from localhost, by a user with the
@@ -121,62 +168,88 @@
#host replication postgres ::1/128 trust
</pre>
+ <p>Start server and alter postgres password</p>
+
+ <pre>
+ # /etc/rc.d/postgresql start
+ </pre>
+
+ <pre>
+ postgres=# alter user postgres with password 'new_password';
+ </pre>
+
+ <h3 id="syslog">2.6. Configure syslog-ng</h3>
+
<p><a href="syslog-ng.html">Configure Syslog-ng</a>, check <a href="http://michael.otacoo.com/postgresql-2/postgres-settings-simple-syslog-configuration-with-syslog-ng/">Michael at otacoo</a> article. Example;</p>
+ <p>Edit /pgsql/data/<a href="../conf/srv/pgsql/data/postgresql.conf">postgresql.conf</a>;</p>
+
<pre>
- destination postgres { file("/var/log/pgsql"); };
- filter f_postgres { facility(local0); };
- log { source(s_log); filter(f_postgres); destination(postgres); };
+ log_destination = 'syslog' # Can specify multiple destinations
+ syslog_facility='LOCAL0'
+ syslog_ident='postgres'
+ log_connections = on
</pre>
- <p>Start server and alter postgres password</p>
+
+ <p>Create /etc/logrotate.d/postgres;</p>
<pre>
- # /etc/rc.d/postgresql start
+ /var/log/pgsql {
+ weekly
+ compress
+ delaycompress
+ rotate 10
+ notifempty
+ create 660 postgres postgres
+ }
</pre>
+
<pre>
- postgres=# alter user postgres with password 'new_password';
+ destination postgres { file("/var/log/pgsql"); };
+ filter f_postgres { facility(local0); };
+ log { source(s_log); filter(f_postgres); destination(postgres); };
</pre>
- <h2 id="createuser">1.3. Create User</h2>
+
+ <h2 id="createuser">3. Create User</h2>
<p>Create a new user with createuser command;</p>
<pre>
$ sudo -u postgres createuser --pwprompt --encrypted \
- --no-createrole --no-createdb laravel_user
+ --no-createrole --no-createdb flyspray
Enter password for new user:
Enter it again:
</pre>
- <h2 id="createdb">1.4. Create Database</h2>
+ <h2 id="createdb">4. Create Database</h2>
<p>Create a new database for new user with createdb command;</p>
<pre>
$ sudo -u postgres createdb --template=template0 --encoding=UTF8 \
- --owner=laravel_user laravel_db
+ --owner=flyspray db_flyspray
</pre>
- <h2 id="dropdb">1.5. Drop Database</h2>
+ <h2 id="dropdb">5. Drop Database</h2>
<p>Deleting database with dropdb command;</p>
<pre>
- sudo -u postgres dropdb laravel_db
+ sudo -u postgres dropdb db_flyspray
</pre>
- <h2 id="dropuser">1.6. Drop User</h2>
+ <h2 id="dropuser">6. Drop User</h2>
<p>Deleting user with dropuser command;</p>
<pre>
- sudo -u postgres dropuser laravel_user
+ sudo -u postgres dropuser flyspray
</pre>
-
- <h2 id="psql">1.7. Psql</h2>
+ <h2 id="psql">7. Psql</h2>
<p>Lets check with psql, login with user postgres;</p>
@@ -190,7 +263,7 @@
postgres=# \?
</pre>
- <h3 id="listdb">Psql - List Databases and Roles</h3>
+ <h3 id="listdb">7.1. List Databases and Roles</h3>
<p>List roles then list databases;</p>
@@ -199,39 +272,43 @@
postgres=# \l
</pre>
- <h3 id="psqldb">Psql - Create Database</h3>
+ <h3 id="psqldb">7.2. Create Database</h3>
<pre>
- postgres=# create database laravel_db_ext owner laravel_user encoding 'UTF-8' template template0;
+ postgres=# create database db_flyspray_ext owner flyspray encoding 'UTF-8' template template0;
</pre>
- <h3 id="droptables">Psql - Drop Tables</h3>
+ <h3 id="droptables">7.3. Drop Tables</h3>
<p>This example assumes that all tables,
are in public schema. First connect to database and
list tables;</p>
<pre>
- postgres=# \c laravel_db
+ postgres=# revoke SELECT on db_flyspray from flyspray;
+ </pre>
+
+ <pre>
+ postgres=# \c db_flyspray
postgres=# \dt
</pre>
<p>Drop all tables on public schema and recreate public schema;</p>
<pre>
- laravel_db=# drop schema public cascade;
- laravel_db=# create schema public;
+ db_flyspray=# drop schema public cascade;
+ db_flyspray=# create schema public;
</pre>
- <h3 id="backup">Backup</h3>
+ <h3 id="backup">7.4. Backup</h3>
<p>Backup Database</p>
- <h3 id="backup">Restore</h3>
+ <h3 id="backup">7.5. Restore</h3>
<pre>
- $ psql laravel_db &lt; database_dump
+ $ psql db_flyspray &lt; database_dump
</pre>
<a href="index.html">Tools Index</a>
@@ -242,7 +319,5 @@
See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
for copying conditions.</p>
-
-
</body>
</html>
diff --git a/tools/qemu.html b/tools/qemu.html
index ce1b66d..8c53ce7 100644
--- a/tools/qemu.html
+++ b/tools/qemu.html
@@ -97,45 +97,53 @@
<dd>The VDE networking backend.</dd>
</dl>
-
- <h3>2.1. Tap interfaces</h3>
-
<pre>
KERNEL=="tun", GROUP="kvm", MODE="0660", OPTIONS+="static_node=net/tun"
</pre>
- <p>Automatic creation of tap interface with
- correct permissions set for user and group,
- you can set only user or group;</p>
- <pre>
- # tunctl -u username -g kvm -t tap0
- </pre>
+ <h3>2.1. Public Bridge</h3>
- <p>Set permissions to existing tap interface;</p>
+ <p>Create <a href="network.html#bridge">bridge</a>, create new
+ tap and add it to bridge;</p>
<pre>
- # tunctl -u username -t tap0
+ # DEV="br0"
+ # TAP="tap5"
</pre>
-
- <p>Manual creation of tap interface;</p>
+ <pre>
+ # ip tuntap add ${TAP} mode tap group kvm
+ # ip link set ${TAP} up
+ </pre>
<pre>
- # ip tuntap add name tap0 mode tap
- # chmod 0666 /dev/tap0
- # chown root:username /dev/tap0
+ # ip link set ${TAP} master ${DEV}
</pre>
+ <p>See <a href="scripts/system-qemu.sh">scripts/system-qemu.sh</a>,
+ as template. Run virtual machine that uses above tap device;</p>
+
<pre>
- # ip addr add 10.0.2.1/24 dev tap0
- # ip link set dev tap0 up
- # ip link show
+ $ ISO=~/crux-3.2.iso
+ $ IMG=~/crux-img.qcow2
+
+ $ qemu-system-x86_64 \
+ -enable-kvm \
+ -m 1024 \
+ -boot d \
+ -cdrom ${ISO} \
+ -hda ${IMG} \
+ -net nic,model=virtio -net tap,ifname=${TAP},script=no,downscript=no
</pre>
+ <h3>2.2. Routing</h3>
+
+ <p>Create interface with correct permissions set for kvm group.</p>
+
<pre>
# sysctl -w net.ipv4.ip_forward=1
- # iptables -t nat -A POSTROUTING -s 10.0.2.0/24 -o eth0 -j MASQUERADE
+ # iptables -t nat -A POSTROUTING -s 10.0.0.0/24 -o eth0 -j MASQUERADE
</pre>
<h2 id="guest">Guest System</h2>
@@ -143,22 +151,16 @@
<p>Start qemu with 512 of ram, mydisk.img as disk and boot from iso</p>
<pre>
- $ qemu-system-x86_64 \
- -enable-kvm \
- -m 512 \
- -boot d -cdrom image.iso \
- -hda mydisk.img
- </pre>
+ $ ISO=~/crux-3.2.iso
+ $ IMG=~/crux-img.qcow2
- <p>Start qemu with 1024 of ram, network configured using tap0
- interface device no host and boot from crux.qcow2;</p>
-
- <pre>
$ qemu-system-x86_64 \
- -enable-kvm \
- -m 1024 \
- -hda c9/local/crux.qcow2 \
- -net nic,model=virtio -net tap,ifname=tap0,script=no,downscript=no
+ -enable-kvm \
+ -m 1024 \
+ -boot d \
+ -cdrom ${ISO} \
+ -hda ${IMG} \
+ -net nic,model=virtio -net tap,ifname=${TAP},script=no,downscript=no
</pre>
<a href="index.html">Tools Index</a>
diff --git a/tools/scripts/config-install.sh b/tools/scripts/config-install.sh
new file mode 100644
index 0000000..061081f
--- /dev/null
+++ b/tools/scripts/config-install.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+CONF_DIR="$(dirname `dirname $0`)/conf"
+echo "CONF_DIR=$CONF_DIR\n"
diff --git a/tools/scripts/install-nginx.sh b/tools/scripts/install-nginx.sh
new file mode 100644
index 0000000..decacc1
--- /dev/null
+++ b/tools/scripts/install-nginx.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+. `dirname $0`/config-install.sh
+
+prt-get depinst nginx
+
+cp -R $CONF_DIR/etc/nginx/* /etc/nginx/
+
+mkdir /srv/www
+chown nginx:www /srv/www
+
+usermod -a -G www nginx
+usermod -m -d /srv/www nginx
+
+openssl genrsa -des3 -out /etc/ssl/keys/nginx.key 2048
+openssl req -new -key /etc/ssl/keys/nginx.key -out /etc/ssl/certs/nginx.csr
+openssl x509 -req -days 365 \
+ -in /etc/ssl/certs/nginx.csr \
+ -signkey /etc/ssl/keys/nginx.key \
+ -out /etc/ssl/certs/nginx.crt
+
+cp /etc/ssl/keys/nginx.key /etc/ssl/keys/nginx.key.pass
+openssl rsa -in /etc/ssl/keys/nginx.key.pass -out /etc/ssl/keys/nginx.key
+
diff --git a/tools/scripts/install-php.sh b/tools/scripts/install-php.sh
new file mode 100644
index 0000000..4c28173
--- /dev/null
+++ b/tools/scripts/install-php.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+. `dirname $0`/config-install.sh
+
+prt-get depinst php php-fpm php-gd php-pdo-pgsql php-postgresql
+
+cp /etc/php/php.ini-development /etc/php/php.ini
diff --git a/tools/scripts/install-postgres.sh b/tools/scripts/install-postgres.sh
new file mode 100644
index 0000000..06666e0
--- /dev/null
+++ b/tools/scripts/install-postgres.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+. `dirname $0`/config-install.sh
+
+prt-get depinst postgresql
+
+cp -R $CONF_DIR/etc/rc.d/postgresql /etc/rc.d/
+
+mkdir /srv/pgsql/
+touch /var/log/postgresql
+chown postgres:postgres /srv/pgsql /var/log/postgresql
+
+sudo -u postgres initdb -D /srv/pgsql/data
+
+cp $CONF_DIR/srv/pgsql/data/pg_hba.conf /srv/pgsql/data/
+chown postgres:postgres /srv/pgsql/data/pg_hba.conf
diff --git a/tools/scripts/replace.sh b/tools/scripts/replace.sh
new file mode 100644
index 0000000..8e393f0
--- /dev/null
+++ b/tools/scripts/replace.sh
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+folder=$1
+oldstring=$2
+newstring=$3
+
+grep -rl $oldstring $folder | xargs sed -i s@$oldstring@$newstring@g
diff --git a/tools/scipts/iptables.sh b/tools/scripts/system-iptables.sh
index 3215633..4ec3b79 100644
--- a/tools/scipts/iptables.sh
+++ b/tools/scripts/system-iptables.sh
@@ -146,11 +146,17 @@
IPT="/usr/sbin/iptables"
SPAMLIST="blockedip"
SPAMDROPMSG="BLOCKED IP DROP"
+
PUB_IF="wlp7s0"
-DHCP_SERV="192.168.1.254"
-#PUB_IP="192.168.1.65"
#PRIV_IF="wlp3s0"
+BRIDGE="br0"
+BNET=10.0.0.0
+BMSK=24
+
+DHCP_IP="192.168.1.254"
+PUB_IP=$(ip addr show dev ${PUB_IF} | grep 'state UP' -A2 | tail -n1 | awk '{print $2}' | cut -f1 -d'/')
+
modprobe ip_conntrack
modprobe ip_conntrack_ftp
@@ -175,10 +181,14 @@ iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT DROP
+
# Unlimited on local
$IPT -A INPUT -i lo -j ACCEPT
$IPT -A OUTPUT -o lo -j ACCEPT
+$IPT -A INPUT -i $BRIDGE -j ACCEPT
+$IPT -A OUTPUT -o $BRIDGE -j ACCEPT
+
# Block sync
$IPT -A INPUT -p tcp ! --syn -m state --state NEW -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 7 --log-prefix "iptables: drop sync: "
$IPT -A INPUT -p tcp ! --syn -m state --state NEW -j DROP
@@ -205,6 +215,17 @@ $IPT -A INPUT -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans
$IPT -A INPUT -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
+##### Add your virtual rules below ######
+
+#echo 1 > /proc/sys/net/ipv4/ip_forward
+#$IPT -t nat -A POSTROUTING -o ${PUB_IF} -j SNAT --to ${PUB_IP}
+##$IPT -t nat -A POSTROUTING -s 10.0.2.0/24 -o ${PUB_IF} -j MASQUERADE
+#$IPT -A FORWARD -i ${TAP_IF} -o ${PUB_IF} -j ACCEPT
+#$IPT -A FORWARD -i ${PUB_IF} -o ${TAP_IF} -j ACCEPT
+#
+#$IPT -A INPUT -i ${TAP_IF} -j ACCEPT
+#$IPT -A OUTPUT -o ${TAP_IF} -j ACCEPT
+
##### Add your AP rules below ######
#echo 1 > /proc/sys/net/ipv4/ip_forward
@@ -242,10 +263,14 @@ $IPT -A INPUT -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
echo "Allow DNS Client"
-#$IPT -A INPUT -i ${PUB_IF} -p udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
-#$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
-#$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
-#$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
+$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
+$IPT -A INPUT -i ${PUB_IF} -p udp --sport 53 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
+
+$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 53 -m state --state NEW -j LOG --log-level 7 --log-prefix "iptables: DNS TCP: "
+$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
+
+$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 1024:65535 --dport 53 -m state --state NEW -j ACCEPT -j LOG --log-level 7 --log-prefix "iptables: DNS UDP: "
+$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 1024:65535 --dport 53 -m state --state NEW,ESTABLISHED -j ACCEPT
echo "Allow Whois Client"
@@ -300,21 +325,20 @@ $IPT -A INPUT -i ${PUB_IF} -p tcp --sport 22 -m state --state ESTABLISHED -j AC
$IPT -A INPUT -i ${PUB_IF} -p tcp --sport 1024:65535 --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT
-
# echo "Allow FairCoin"
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 46392 -m state --state NEW,ESTABLISHED -j ACCEPT
# $IPT -A INPUT -i ${PUB_IF} -p tcp --sport 46392 -m state --state ESTABLISHED -j ACCEPT
-#
+#
# echo "Allow Dashcoin"
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 29080 -m state --state NEW,ESTABLISHED -j ACCEPT
# $IPT -A INPUT -i ${PUB_IF} -p tcp --sport 29080 -m state --state ESTABLISHED -j ACCEPT
-#
+#
# echo "Allow warzone2100"
# $IPT -A INPUT -i ${PUB_IF} -p tcp --dport 2100 -s 192.168.0.0/16 -j ACCEPT
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 2100 -j ACCEPT
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 2100 -j ACCEPT
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 9990 -j ACCEPT
-#
+#
# echo "Allow wesnoth"
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 15000 -m state --state NEW -j ACCEPT
# $IPT -A OUTPUT -o ${PUB_IF} -p tcp --dport 14998 -m state --state NEW -j ACCEPT
@@ -326,8 +350,8 @@ $IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 1024:65535 --dport 1024: -m state --
$IPT -A INPUT -i ${PUB_IF} -p udp --sport 520 --dport 520 -s 192.168.0.0/16 -j DROP
# DHCP
-$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 68 --dport 67 -d $DHCP_SERV -j ACCEPT
-$IPT -A INPUT -i ${PUB_IF} -p udp --sport 68 --dport 67 -s $DHCP_SERV -j ACCEPT
+$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 68 --dport 67 -d $DHCP_IP -j ACCEPT
+$IPT -A INPUT -i ${PUB_IF} -p udp --sport 68 --dport 67 -s $DHCP_IP -j ACCEPT
# log everything else and drop
$IPT -A INPUT -j LOG --log-level 7 --log-prefix "iptables: INPUT: "
diff --git a/tools/scripts/system-qemu.sh b/tools/scripts/system-qemu.sh
new file mode 100644
index 0000000..8c68e70
--- /dev/null
+++ b/tools/scripts/system-qemu.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+ISO=~/crux-3.2.iso
+IMG=~/crux-img.qcow2
+
+TAP=$1
+
+echo "TAP: $TAP"
+
+qemu-system-x86_64 \
+ -enable-kvm \
+ -m 1024 \
+ -boot d \
+ -cdrom ${ISO} \
+ -hda ${IMG} \
+ -net nic,model=virtio -net tap,ifname=${TAP},script=no,downscript=no
diff --git a/tools/squid.html b/tools/squid.html
index 363edba..f34c2dd 100644
--- a/tools/squid.html
+++ b/tools/squid.html
@@ -22,17 +22,17 @@ http://roberts.bplaced.net/index.php/linux-guides/centos-6-guides/proxy-server/s
<pre>
# Generate Private Key
-openssl genrsa -out c13.libernodus.com.key 2048
+openssl genrsa -out core.privat-network.net.key 2048
</pre>
<pre>
# Create Certificate Signing Request
-openssl req -new -key c13.libernodus.com.key -out c13.libernodus.com.csr
+openssl req -new -key core.privat-network.net.key -out core.privat-network.net.csr
</pre>
<pre>
# Sign Certificate
-openssl x509 -req -days 3652 -in c13.libernodus.com.csr -signkey c13.libernodus.com.key -out c13.libernodus.com.cert
+openssl x509 -req -days 3652 -in core.privat-network.net.csr -signkey core.privat-network.net.key -out core.privat-network.net.cert
cat squid.key squid.crt > squid.pem
@@ -56,7 +56,7 @@ chown -R squid.squid /var/lib/ssl_db
# Proxy Aware (non-intercepted traffic)
http_port 192.168.0.1:3128 ssl-bump cert=/etc/squid/example.com.cert key=/etc/squid/example.com.private generate-host-certificates=on version=1 options=NO_SSLv2,NO_SSLv3,SINGLE_DH_USE
# Intercepted Traffic
-https_port 192.168.0.1:3130 cert=/etc/squid/ssl/c13.libernodus.com.cert key=/etc/squid/c13.libernodus.com.key ssl-bump intercept generate-host-certificates=on version=1 options=NO_SSLv2,NO_SSLv3,SINGLE_DH_USE
+https_port 192.168.0.1:3130 cert=/etc/squid/ssl/core.privat-network.net.cert key=/etc/squid/core.privat-network.net.key ssl-bump intercept generate-host-certificates=on version=1 options=NO_SSLv2,NO_SSLv3,SINGLE_DH_USE
# SSL Bump Config
diff --git a/tools/storage.html b/tools/storage.html
index 121c802..97b73b0 100644
--- a/tools/storage.html
+++ b/tools/storage.html
@@ -6,28 +6,11 @@
</head>
<body>
- <a href="index.html">Systools Index</a>
+ <a href="index.html">Tools Index</a>
<h1>Storage</h1>
- <h2 id="mv">Moving partitions</h2>
-
- <pre>
- var
- (parted) mkpart primary ext4 57GiB 200GiB
- </pre>
- <pre>
- swap
- (parted) mkpart primary linux-swap 29GiB 57GiB
- </pre>
- <pre>
- home
- (parted) mkpart primary ext4 57GiB 200GiB
- </pre>
- <pre>
- srv
- (parted) mkpart primary ext4 200GiB 100%
- </pre>
+ <h2 id="mv">1. Moving partitions</h2>
<p>Reboot into single-user mode where services aren't started and networking is offline.<p>
<pre>
@@ -35,13 +18,16 @@
</pre>
<p>Copy the data:</p>
- cp -apx /srv/* /mnt/srv
+
+ <pre>
+ # cp -apx /srv/* /mnt/srv
+ </pre>
<p>Rename directory, for later backup;</p>
<pre>
- mv /srv /srv.old
- mkdir /srv
+ # mv /srv /srv.old
+ # mkdir /srv
</pre>
<p>Edit the <a href="../conf/etc/fstab">/etc/fstab</a>file:</p>
@@ -53,320 +39,7 @@
<p>Reboot in normal mode.</p>
- <h2 id="lvm">1.2. LVM</h2>
-
- <p>Read <a href="https://raid.wiki.kernel.org/index.php/RAID_setup">Raid Setup</a>,
- the only thing you will need outside system is:
- "Patience, Pizza, and your favorite caffeinated beverage.".
- <a href="https://wiki.archlinux.org/index.php/Software_RAID_and_LVM">Arch Wiki</a>
- article about Sofware RAID and LVM.</p>
-
- <p>Basic idea behind RAID is to deal with independent disks
- as an array of drives. Raid 0 uses two or more disks as one,
- with performance gains without fault-tolerance. From raid 1
- to 6 they offer diferent fault tolerance mechanisms.</p>
-
- <p>LVM or Logic Volume Manager bring one more layer, read
- <a href="http://www.tuxradar.com/content/lvm-made-easy">Lvm made easy</a>.
- Partitions under lvm are easy to be resized, moved and there is
- a tool to help encrypt. There is more freedom to name physical
- disk names exp; production, development, backups...</p>
-
-
- <p>Until now "from install" there is only one partition,
- it is good idea to have a system with diferent partitions for each
- propos. If is a "fresh install";</p>
-
- <pre>
- # cd /iso/crux/opt/
- # pkgadd lvm2#2.02.107-1.pkg.tar.xz
- #
- </pre>
-
- <h3>Multiple Partition</h3>
-
- <p>Create a LVM partition, fdisk should
- show something like this;</p>
-
- <pre>
- # fdisk /dev/sdb
-
- Welcome to fdisk (util-linux 2.26.1).
- Changes will remain in memory only, until you decide to write them.
- Be careful before using the write command.
-
-
- Command (m for help): p
- Disk /dev/sdb: 232.9 GiB, 250059350016 bytes, 488397168 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: gpt
- Disk identifier: E37FE96F-9845-45A4-B6DA-BF3F8E47511A
-
- Device Start End Sectors Size Type
- /dev/sdb1 2048 8056 6009 3M BIOS boot
- /dev/sdb2 8192 18440191 18432000 8.8G Linux filesystem
-
- Command (m for help):
- </pre>
-
- <p>I use defaults unless to define system partition last sector,
- where in this example is size, +80G</p>
-
- <pre>
- Command (m for help): n
- Partition number (3-128, default 3):
- First sector (8057-488397134, default 18440192):
- Last sector, +sectors or +size{K,M,G,T,P} (18440192-488397134, default 488397134): +80G
-
- Created a new partition 3 of type 'Linux filesystem' and of size 80 GiB.
-
- Command (m for help):
-
- Command (m for help): t
- Partition number (1-3, default 3):
- Hex code (type L to list all codes): 23
-
- Changed type of partition 'Linux filesystem' to 'Linux LVM'.
-
- Command (m for help): n
- Partition number (4-128, default 4):
- First sector (8057-488397134, default 186212352):
- Last sector, +sectors or +size{K,M,G,T,P} (186212352-488397134, default 488397134):
-
- Created a new partition 4 of type 'Linux filesystem' and of size 144.1 GiB.
-
- Command (m for help): t
- Partition number (1-4, default 4):
- Hex code (type L to list all codes): 23
-
- Changed type of partition 'Linux filesystem' to 'Linux LVM'.
-
- Command (m for help): w
- The partition table has been altered.
- Calling ioctl() to re-read partition table.
- Syncing disks.
-
- #
- </pre>
-
- <h3>Create Phisical Volume</h3>
-
-
- <pre>
- # pvcreate /dev/sdb3
- Physical volume "/dev/sdb3" successfully created
- #
- # pvcreate /dev/sdb4
- Physical volume "/dev/sdb4" successfully created
- #
- </pre>
-
- <h3>Create Volume Group</h3>
-
- <pre>
- # vgcreate systemvg /dev/sdb3
- Volume group "systemvg" successfully created
- # vgcreate homevg /dev/sdb4
- Volume group "homevg" successfully created
- #
- </pre>
-
- <h3>Create Logical Volume</h3>
-
- <pre>
- # lvcreate -L 15G -n distfileslv systemvg
- Logical volume "distfileslv" created.
- # lvcreate -L 8G -n packageslv systemvg
- Logical volume "packageslv" created.
- # lvcreate -L 4G -n swaplv systemvg
- Logical volume "swaplv" created.
- # lvcreate -L 80G -n homelv homevg
- Logical volume "homelv" created.
- #
- </pre>
-
- <pre>
- # mkfs.ext4 /dev/systemvg/distfileslv
- # mkfs.ext4 /dev/systemvg/packageslv
- # mkswap /dev/systemvg/swaplv
- # mkfs.ext4 /dev/homevg/homelv
- </pre>
-
- <h3>Activate Deactivate</h3>
-
- <p>Deactivate logical volumes;</p>
-
- <pre>
- # lvchange -a -n /dev/systemvg/packageslv
- # lvchange -a -n /dev/systemvg/distfileslv
- # swapoff /dev/systemvg/sawplv
- # lvchange -a -n /dev/systemvg/swaplv
- </pre>
-
- <p>Deactivate volume group;</p>
-
- <pre>
- # vgchange -a n systemvg
- 0 logical volume(s) in volume group "systemvg" now active
- #
- </pre>
-
- <p>Activate volume group;</p>
- <pre>
- # vgchange -a y systemvg
- 3 logical volume(s) in volume group "systemvg" now active
- #
- </pre>
-
- <h3>Search Volume Groups</h3>
-
- <pre>
- # vgscan
- Reading all physical volumes. This may take a while...
- Found volume group "homevg" using metadata type lvm2
- Found volume group "systemvg" using metadata type lvm2
- #
- </pre>
-
- <h3>Reconfigure System</h3>
-
- <p>Start by mounting distfileslv and packageslv;</p>
-
- <pre>
- # mkdir -p /var/ports/distfiles
- # mkdir -p /var/ports/packages
- # mkdir -p /var/ports/work
- # mkdir -p /var/ports/pkgbuild
- # chown -R pkgmk:pkgmk /var/ports
- #
- </pre>
-
- <pre>
- # vim /etc/pkgmk.conf
-
- # PKGMK_SOURCE_MIRRORS=()
- PKGMK_SOURCE_DIR="/var/ports/distfiles"
- PKGMK_PACKAGE_DIR="/var/ports/packages"
- PKGMK_WORK_DIR="/var/ports/work/$name
- </pre>
-
- <p>Edit /etc/prt-get.conf;</p>
-
- <pre>
- ### log options:
- writelog enabled # (enabled|disabled)
- logmode overwrite # (append|overwrite)
- rmlog_on_success yes # (no|yes)
- logfile /var/ports/pkgbuild/%n.log
- </pre>
-
- <pre>
- #
- # /etc/fstab: static file system information
- #
- # <file system> <dir> <type> <options> <dump> <pass>
-
- UUID=49031e4e-f899-499d-ac83-401ad12635f5 / ext4 defaults,errors=remount-ro,noatime 0 1
-
- #/dev/mapper/homevg-homelv:
- UUID=c3158626-de78-4bfa-ab8a-9e7e157eca88 /home ext4 defaults,noatime 0 2
-
- #/dev/mapper/systemvg-distfileslv:
- UUID=0aba2d28-8e3a-4a89-bff5-1698708e13d0 /var/ports/distfiles ext4 defaults,noatime 0 2
- #/dev/mapper/systemvg-packageslv:
- UUID=b5a38930-2827-4f00-809a-a0c4d5488aa8 /var/ports/packages ext4 defaults,noatime 0 2
-
- #/dev/mapper/systemvg-swaplv:
- UUID=08295a67-a056-4dea-9462-209f151e4cdf swap swap defaults 0 0
- devpts /dev/pts devpts noexec,nosuid,gid=tty,mode=0620 0 0
- tmp /tmp tmpfs defaults 0 0
- shm /dev/shm tmpfs defaults 0 0
-
- pkgmk /var/ports/work tmpfs size=1G,uid=100,defaults 0 0
- # End of file
- </pre>
-
- <p>You can move home directory to new one with
- just one command; "usermod -m -d /home/new user".</p>
-
- <pre>
- # mount /var/ports/distfiles
- # mount /var/ports/packages
- # umount /home/pkgmk/work
- # mount /var/ports/work
- # mv /home/pkgmk/distfiles/* /var/ports/distfiles/
- # mv /home/pkgmk/packages/* /var/ports/packages/
- # rm -R /home/pkgmk
- # usermod -d /var/ports pkgmk
- </pre>
-
- <p>Check ownership, you may need recursive if partition
- has bin used on another system.</p>
-
- <pre>
- # chown pkgmk:pkgmk /var/ports/distfiles
- # chown pkgmk:pkgmk /var/ports/packages
- #
- </pre>
-
- <pre>
- # mkdir /home/tmp
- # mount /dev/homevg/homelv /home/tmp
- # mv /home/user /home/tmp
- # umount /home/tmp
- # rmdir /home/tmp
- # rm -R /home/user
- </pre>
-
- <h2>Maintenance</h2>
-
- <pre>
- # smartctl -t long /dev/sdb1
- # smartctl -a /dev/sdb1 | less
- </pre>
-
-
- <p><a href="https://wiki.archlinux.org/index.php/Badblocks">Non Destructive Test;</a></p>
-
- <pre>
- # badblocks -nsv /dev/sdb1
- </pre>
-
-
- <h2>Example gitolite volume</h2>
-
- <p>Lets create new lvm volume for repositories data;</p>
-
- <pre>
- # lvcreate -L 15G -n gitlv homevg
- Logical volume "gitlv" created.
-
- # mkfs.ext4 /dev/homevg/gitlv
- mke2fs 1.42.12 (29-Aug-2014)
- Creating filesystem with 3932160 4k blocks and 983040 inodes
- Filesystem UUID: 54c7dca5-1558-4f90-8d81-c01e4e50c6ae
- Superblock backups stored on blocks:
- 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208
-
- Allocating group tables: done
- Writing inode tables: done
- Creating journal (32768 blocks): done
- Writing superblocks and filesystem accounting information: done
-
- #
- </pre>
-
- <p>Edit fstab</p>
-
- <pre>
- UUID=54c7dca5-1558-4f90-8d81-c01e4e50c6ae /srv/git ext4 defaults,noatime 0 2
- </pre>
-
- <h2 id="btrfs">1.3. BTRFS</h2>
-
- <a href="index.html">Systools Index</a>
+ <a href="index.html">Tools Index</a>
<p>
This is part of the c9-doc Manual.
Copyright (C) 2016