release 0.7.0

51 files changed, 211 insertions, 1386 deletions

diff --git a/tools/conf/etc/skel/.gitconfig b/tools/conf/etc/skel/.gitconfig
deleted file mode 100644
index 730d8d9..0000000
--- a/tools/conf/etc/skel/.gitconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-[core]
-	pager = less -F -X
-	editor = vim
-[diff]
-	tool = vimdiff
-[merge]
-	tool = vimdiff
-	conflictstyle = diff3
-[difftool]
-	prompt = false
diff --git a/tools/conf/etc/skel/.gnupg/gpg.conf b/tools/conf/etc/skel/.gnupg/gpg.conf
deleted file mode 100644
index 48edc58..0000000
--- a/tools/conf/etc/skel/.gnupg/gpg.conf
+++ /dev/null
@@ -1,136 +0,0 @@
-# Options for GnuPG
-# Copyright 1998-2003, 2010 Free Software Foundation, Inc.
-# Copyright 1998-2003, 2010 Werner Koch
-#
-# This file is free software; as a special exception the author gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-#
-# This file is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
-# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-#
-# Unless you specify which option file to use (with the command line
-# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf
-# by default.
-#
-# An options file can contain any long options which are available in
-# GnuPG. If the first non white space character of a line is a '#',
-# this line is ignored.  Empty lines are also ignored.
-#
-# See the gpg man page for a list of options.
-
-
-# If you have more than 1 secret key in your keyring, you may want to
-# uncomment the following option and set your preferred keyid.
-
-#default-key 621CC013
-
-
-# If you do not pass a recipient to gpg, it will ask for one.  Using
-# this option you can encrypt to a default key.  Key validation will
-# not be done in this case.  The second form uses the default key as
-# default recipient.
-
-#default-recipient some-user-id
-#default-recipient-self
-
-
-# Group names may be defined like this:
-#   group mynames = paige 0x12345678 joe patti
-#
-# Any time "mynames" is a recipient (-r or --recipient), it will be
-# expanded to the names "paige", "joe", and "patti", and the key ID
-# "0x12345678".  Note there is only one level of expansion - you
-# cannot make an group that points to another group.  Note also that
-# if there are spaces in the recipient name, this will appear as two
-# recipients.  In these cases it is better to use the key ID.
-
-#group mynames = paige 0x12345678 joe patti
-
-
-# GnuPG can automatically locate and retrieve keys as needed using
-# this option.  This happens when encrypting to an email address (in
-# the "user@@example.com" form) and there are no keys matching
-# "user@example.com" in the local keyring.  This option takes any
-# number mechanisms which are tried in the given order.  The default
-# is "--auto-key-locate local" to search for keys only in the local
-# key database.  Uncomment the next line to locate a missing key using
-# two DNS based mechanisms.
-
-#auto-key-locate local,pka,dane
-
-
-# Common options for keyserver functions:
-# (Note that the --keyserver option has been moved to dirmngr.conf)
-#
-# include-disabled = when searching, include keys marked as "disabled"
-#                    on the keyserver (not all keyservers support this).
-#
-# no-include-revoked = when searching, do not include keys marked as
-#                      "revoked" on the keyserver.
-#
-# verbose = show more information as the keys are fetched.
-#           Can be used more than once to increase the amount
-#           of information shown.
-#
-# auto-key-retrieve = automatically fetch keys as needed from the keyserver
-#                     when verifying signatures or when importing keys that
-#                     have been revoked by a revocation key that is not
-#                     present on the keyring.
-#
-# no-include-attributes = do not include attribute IDs (aka "photo IDs")
-#                         when sending keys to the keyserver.
-
-#keyserver-options auto-key-retrieve
-
-
-# Uncomment this line to display photo user IDs in key listings and
-# when a signature from a key with a photo is verified.
-
-#show-photos
-
-
-# Use this program to display photo user IDs
-#
-# %i is expanded to a temporary file that contains the photo.
-# %I is the same as %i, but the file isn't deleted afterwards by GnuPG.
-# %k is expanded to the key ID of the key.
-# %K is expanded to the long OpenPGP key ID of the key.
-# %t is expanded to the extension of the image (e.g. "jpg").
-# %T is expanded to the MIME type of the image (e.g. "image/jpeg").
-# %f is expanded to the fingerprint of the key.
-# %% is %, of course.
-#
-# If %i or %I are not present, then the photo is supplied to the
-# viewer on standard input.  If your platform supports it, standard
-# input is the best way to do this as it avoids the time and effort in
-# generating and then cleaning up a secure temp file.
-#
-# The default program is "xloadimage -fork -quiet -title 'KeyID 0x%k' stdin"
-# On Mac OS X and Windows, the default is to use your regular JPEG image
-# viewer.
-#
-# Some other viewers:
-# photo-viewer "qiv %i"
-# photo-viewer "ee %i"
-# photo-viewer "display -title 'KeyID 0x%k'"
-#
-# This one saves a copy of the photo ID in your home directory:
-# photo-viewer "cat > ~/photoid-for-key-%k.%t"
-#
-# Use your MIME handler to view photos:
-# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG"
-
-
-# Because some mailers change lines starting with "From " to ">From "
-# it is good to handle such lines in a special way when creating
-# cleartext signatures; all other PGP versions do it this way too.
-# To enable full OpenPGP compliance you may want to use this option.
-
-#no-escape-from-lines
-
-
-# Uncomment the following option to get rid of the copyright notice
-
-#no-greeting
diff --git a/tools/conf/etc/skel/.mutt/external b/tools/conf/etc/skel/.mutt/external
deleted file mode 100644
index 8ade1b1..0000000
--- a/tools/conf/etc/skel/.mutt/external
+++ /dev/null
@@ -1,27 +0,0 @@
-color status blue default
-
-unset sendmail
-
-set folder="~/.mailext"
-set mbox_type=Maildir
-set spoolfile="~/.mailext"
-set keep_flagged=yes            # esc-f to mark messages in spool, and
-
-set mbox="~/.mailext"
-set postponed="+.Drafts"
-set record="+.Sent"
-
-set use_from=yes
-set ssl_starttls=yes
-set ssl_force_tls = yes
-
-set realname='User Name'
-set from=mail@external.org
-
-set pop_user="mail@external.org"
-set pop_pass="password"
-set pop_delete=yes
-set pop_host="pops://$pop_user:$pop_pass@pop.external.org:995"
-
-set smtp_url="smtps://$pop_user:$pop_pass@smtp.external.org/"
-
diff --git a/tools/conf/etc/skel/.mutt/gpg.rc b/tools/conf/etc/skel/.mutt/gpg.rc
deleted file mode 100644
index 2ef0ae2..0000000
--- a/tools/conf/etc/skel/.mutt/gpg.rc
+++ /dev/null
@@ -1,88 +0,0 @@
-# -*-muttrc-*-
-#
-# Command formats for gpg.
-# 
-# This version uses gpg-2comp from 
-#   http://70t.de/download/gpg-2comp.tar.gz
-#
-# $Id$
-#
-# %p    The empty string when no passphrase is needed,
-#       the string "PGPPASSFD=0" if one is needed.
-#
-#       This is mostly used in conditional % sequences.
-#
-# %f    Most PGP commands operate on a single file or a file
-#       containing a message.  %f expands to this file's name.
-#
-# %s    When verifying signatures, there is another temporary file
-#       containing the detached signature.  %s expands to this
-#       file's name.
-#
-# %a    In "signing" contexts, this expands to the value of the
-#       configuration variable $pgp_sign_as.  You probably need to
-#       use this within a conditional % sequence.
-#
-# %r    In many contexts, mutt passes key IDs to pgp.  %r expands to
-#       a list of key IDs.
-
-# Note that we explicitly set the comment armor header since GnuPG, when used
-# in some localiaztion environments, generates 8bit data in that header, thereby
-# breaking PGP/MIME.
-
-# decode application/pgp
-set pgp_decode_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
-
-# verify a pgp/mime signature
-set pgp_verify_command="gpg --status-fd=2 --no-verbose --quiet --batch --output - --verify %s %f"
-
-# decrypt a pgp/mime attachment
-set pgp_decrypt_command="gpg --status-fd=2 %?p?--passphrase-fd 0? --no-verbose --quiet --batch --output - %f"
-
-# create a pgp/mime signed attachment
-# set pgp_sign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
-set pgp_sign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --detach-sign --textmode %?a?-u %a? %f"
-
-# create a application/pgp signed (old-style) message
-# set pgp_clearsign_command="gpg-2comp --comment '' --no-verbose --batch --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
-set pgp_clearsign_command="gpg --no-verbose --batch --quiet --output - %?p?--passphrase-fd 0? --armor --textmode --clearsign %?a?-u %a? %f"
-
-# create a pgp/mime encrypted attachment
-# set pgp_encrypt_only_command="pgpewrap gpg-2comp -v --batch --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
-set pgp_encrypt_only_command="pgpewrap gpg --batch --quiet --no-verbose --output - --encrypt --textmode --armor --always-trust -- -r %r -- %f"
-
-# create a pgp/mime encrypted and signed attachment
-# set pgp_encrypt_sign_command="pgpewrap gpg-2comp %?p?--passphrase-fd 0? -v --batch --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
-set pgp_encrypt_sign_command="pgpewrap gpg %?p?--passphrase-fd 0? --batch --quiet --no-verbose --textmode --output - --encrypt --sign %?a?-u %a? --armor --always-trust -- -r %r -- %f"
-
-# import a key into the public key ring
-set pgp_import_command="gpg --no-verbose --import %f"
-
-# export a key from the public key ring
-set pgp_export_command="gpg --no-verbose --export --armor %r"
-
-# verify a key
-set pgp_verify_key_command="gpg --verbose --batch --fingerprint --check-sigs %r"
-
-# read in the public key ring
-set pgp_list_pubring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-keys %r"
-
-# read in the secret key ring
-set pgp_list_secring_command="gpg --no-verbose --batch --quiet --with-colons --with-fingerprint --with-fingerprint --list-secret-keys %r"
-
-# fetch keys
-# set pgp_getkeys_command="pkspxycwrap %r"
-
-# pattern for good signature - may need to be adapted to locale!
-
-# set pgp_good_sign="^gpgv?: Good signature from "
-
-# OK, here's a version which uses gnupg's message catalog:
-# set pgp_good_sign="`gettext -d gnupg -s 'Good signature from "' | tr -d '"'`"
-
-# This version uses --status-fd messages
-set pgp_good_sign="^\\[GNUPG:\\] GOODSIG"
-
-# pattern to verify a decryption occurred
-set pgp_decryption_okay="^\\[GNUPG:\\] DECRYPTION_OKAY"
-
diff --git a/tools/conf/etc/skel/.mutt/mail_alias b/tools/conf/etc/skel/.mutt/mail_alias
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.mutt/mail_alias
+++ /dev/null
diff --git a/tools/conf/etc/skel/.mutt/muttrc b/tools/conf/etc/skel/.mutt/muttrc
deleted file mode 100644
index 6ec1da4..0000000
--- a/tools/conf/etc/skel/.mutt/muttrc
+++ /dev/null
@@ -1,60 +0,0 @@
-set config_charset="utf-8"
-# set locale="de_CH"
-set charset="utf-8"
-set send_charset="utf-8"
-set editor="vim"
-set visual=vim
-set auto_tag
-set sort=threads
-
-set sort_browser=reverse-date
-set sort_aux=reverse-last-date-received
-set duplicate_threads=yes
-
-set crypt_use_gpgme=yes
-
-## automatically sign all outgoing messages
-set crypt_autosign=yes
-
-## automatically encrypt outgoing messages
-set crypt_autoencrypt=yes
-
-## automatically verify the sign of a message when opened
-set crypt_verify_sig=yes
-
-set pgp_sign_as=0x8BF422F79FC7C975BDF07828E88440BC35095A74
-#set pgp_sign_as=0x8BF422F7
-set pgp_timeout=1800
-set pgp_autosign=yes
-#set pgp_replyencrypt=yes
-
-source ~/.mutt/gpg.rc
-
-source "~/.mutt/mail_alias"
-set alias_file=~/.mutt/mail_alias
-
-# Header
-set header_cache =~/.mutt/cache/headers
-set message_cachedir =~/.mutt/cache/bodies
-set certificate_file =~/.mutt/certificates
-
-set timeout=10    # mutt 'presses' (like) a key for you 
-                  #(while you're idle) each x sec to trigger 
-                  #the thing below
-set mail_check=5  # mutt checks for new mails on every keystroke
-                  # but not more often then once in 5 seconds
-set beep_new      # beep on new messages in the mailboxes
-
-## Local system account
-folder-hook '.mail' 'source ~/.mutt/system'
-
-## Remote account
-folder-hook '.mailext' 'source ~/.mutt/external'
-
-## Default account
-source ~/.mutt/system
-
-## Shortcuts
-macro index,pager <f3> '<sync-mailbox><enter-command>source ~/.mutt/external<enter><change-folder>!<enter>'
-
-macro index,pager <f2> '<sync-mailbox><enter-command>source ~/.mutt/system<enter><change-folder>!<enter>'
diff --git a/tools/conf/etc/skel/.mutt/system b/tools/conf/etc/skel/.mutt/system
deleted file mode 100644
index ae23778..0000000
--- a/tools/conf/etc/skel/.mutt/system
+++ /dev/null
@@ -1,25 +0,0 @@
-color status green default
-
-set folder="~/.mail"
-set mbox_type=Maildir
-set spoolfile=/var/spool/mail/username
-set keep_flagged=yes
-
-set mbox="~/.mail"           # ~/.mailext/read_inbox
-set postponed="+.Drafts"
-set record="+.Sent"
-
-set use_from=yes
-
-set sendmail=/usr/sbin/exim
-set ssl_starttls=no
-set ssl_force_tls=no
-
-unset pop_user
-unset pop_pass
-unset pop_delete
-unset pop_host
-unset smtp_url
-
-set realname='username'
-set from=username@localhost
diff --git a/tools/conf/etc/skel/.vim/backup/.gitignore b/tools/conf/etc/skel/.vim/backup/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/backup/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/colors/wombat256mod.vim b/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
deleted file mode 100644
index 1137eb8..0000000
--- a/tools/conf/etc/skel/.vim/colors/wombat256mod.vim
+++ /dev/null
@@ -1,96 +0,0 @@
-" Vim color file
-" Original Maintainer:  Lars H. Nielsen (dengmao@gmail.com)
-" Last Change:  2010-07-23
-"
-" Modified version of wombat for 256-color terminals by
-"   David Liang (bmdavll@gmail.com)
-" based on version by
-"   Danila Bespalov (danila.bespalov@gmail.com)
-
-set background=dark
-
-if version > 580
-	hi clear
-	if exists("syntax_on")
-		syntax reset
-	endif
-endif
-
-let colors_name = "wombat256mod"
-
-
-" General colors
-hi Normal		ctermfg=252		ctermbg=234		cterm=none		guifg=#e3e0d7	guibg=#242424	gui=none
-hi Cursor		ctermfg=234		ctermbg=228		cterm=none		guifg=#242424	guibg=#eae788	gui=none
-hi Visual		ctermfg=251		ctermbg=239		cterm=none		guifg=#c3c6ca	guibg=#554d4b	gui=none
-hi VisualNOS	ctermfg=251		ctermbg=236		cterm=none		guifg=#c3c6ca	guibg=#303030	gui=none
-hi Search		ctermfg=177		ctermbg=241		cterm=none		guifg=#d787ff	guibg=#636066	gui=none
-hi Folded		ctermfg=103		ctermbg=237		cterm=none		guifg=#a0a8b0	guibg=#3a4046	gui=none
-hi Title		ctermfg=230						cterm=bold		guifg=#ffffd7					gui=bold
-hi StatusLine	ctermfg=230		ctermbg=238		cterm=none		guifg=#ffffd7	guibg=#444444	gui=italic
-hi VertSplit	ctermfg=238		ctermbg=238		cterm=none		guifg=#444444	guibg=#444444	gui=none
-hi StatusLineNC	ctermfg=241		ctermbg=238		cterm=none		guifg=#857b6f	guibg=#444444	gui=none
-hi LineNr		ctermfg=241		ctermbg=232		cterm=none		guifg=#857b6f	guibg=#080808	gui=none
-hi SpecialKey	ctermfg=241		ctermbg=235		cterm=none		guifg=#626262	guibg=#2b2b2b	gui=none
-hi WarningMsg	ctermfg=203										guifg=#ff5f55
-hi ErrorMsg		ctermfg=196		ctermbg=236		cterm=bold		guifg=#ff2026	guibg=#3a3a3a	gui=bold
-
-" Vim >= 7.0 specific colors
-if version >= 700
-hi CursorLine					ctermbg=236		cterm=none						guibg=#32322f
-hi MatchParen	ctermfg=228		ctermbg=101		cterm=bold		guifg=#eae788	guibg=#857b6f	gui=bold
-hi Pmenu		ctermfg=230		ctermbg=238						guifg=#ffffd7	guibg=#444444
-hi PmenuSel		ctermfg=232		ctermbg=192						guifg=#080808	guibg=#cae982
-endif
-
-" Diff highlighting
-hi DiffAdd						ctermbg=17										guibg=#2a0d6a
-hi DiffDelete	ctermfg=234		ctermbg=60		cterm=none		guifg=#242424	guibg=#3e3969	gui=none
-hi DiffText						ctermbg=53		cterm=none						guibg=#73186e	gui=none
-hi DiffChange					ctermbg=237										guibg=#382a37
-
-"hi CursorIM
-"hi Directory
-"hi IncSearch
-"hi Menu
-"hi ModeMsg
-"hi MoreMsg
-"hi PmenuSbar
-"hi PmenuThumb
-"hi Question
-"hi Scrollbar
-"hi SignColumn
-"hi SpellBad
-"hi SpellCap
-"hi SpellLocal
-"hi SpellRare
-"hi TabLine
-"hi TabLineFill
-"hi TabLineSel
-"hi Tooltip
-"hi User1
-"hi User9
-"hi WildMenu
-
-
-" Syntax highlighting
-hi Keyword		ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
-hi Statement	ctermfg=111		cterm=none		guifg=#88b8f6	gui=none
-hi Constant		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi Number		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi PreProc		ctermfg=173		cterm=none		guifg=#e5786d	gui=none
-hi Function		ctermfg=192		cterm=none		guifg=#cae982	gui=none
-hi Identifier	ctermfg=192		cterm=none		guifg=#cae982	gui=none
-hi Type			ctermfg=186		cterm=none		guifg=#d4d987	gui=none
-hi Special		ctermfg=229		cterm=none		guifg=#eadead	gui=none
-hi String		ctermfg=113		cterm=none		guifg=#95e454	gui=italic
-hi Comment		ctermfg=246		cterm=none		guifg=#9c998e	gui=italic
-hi Todo			ctermfg=101		cterm=none		guifg=#857b6f	gui=italic
-
-
-" Links
-hi! link FoldColumn		Folded
-hi! link CursorColumn	CursorLine
-hi! link NonText		LineNr
-
-" vim:set ts=4 sw=4 noet:
diff --git a/tools/conf/etc/skel/.vim/swap/.gitignore b/tools/conf/etc/skel/.vim/swap/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/swap/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/undodir/.gitignore b/tools/conf/etc/skel/.vim/undodir/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/undodir/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vim/views/.gitignore b/tools/conf/etc/skel/.vim/views/.gitignore
deleted file mode 100644
index e69de29..0000000
--- a/tools/conf/etc/skel/.vim/views/.gitignore
+++ /dev/null
diff --git a/tools/conf/etc/skel/.vimrc b/tools/conf/etc/skel/.vimrc
deleted file mode 100644
index fb4445f..0000000
--- a/tools/conf/etc/skel/.vimrc
+++ /dev/null
@@ -1,156 +0,0 @@
-" Use Vim settings, rather than Vi settings (much better!).
-" This must be first, because it changes other options as a side effect.
-set nocompatible
-
-"" allow backspacing over everything in insert mode
-"set backspace=indent,eol,start
-"
-if has("vms")
-  set nobackup		" do not keep a backup file, use versions instead
-else
-  set backup		" keep a backup file (restore to previous version)
-  set undofile		" keep an undo file (undo changes after closing)
-endif
-
-set history=50		" keep 50 lines of command line history
-set ruler		" show the cursor position all the time
-set showcmd		" display incomplete commands
-set incsearch		" do incremental searching
-
-"" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
-"" let &guioptions = substitute(&guioptions, "t", "", "g")
-"
-"" Don't use Ex mode, use Q for formatting
-"map Q gq
-"
-"" CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
-"" so that you can undo CTRL-U after inserting a line break.
-"inoremap <C-U> <C-G>u<C-U>
-"
-"" In many terminal emulators the mouse works just fine, thus enable it.
-"if has('mouse')
-"  set mouse=a
-"endif
-"
-"" Switch syntax highlighting on, when the terminal has colors
-"" Also switch on highlighting the last used search pattern.
-
-" colorscheme desert
-set t_Co=256
-if &t_Co > 2 || has("gui_running")
-  syntax on
-  set hlsearch
-  set background=dark
-  colorscheme wombat256mod
-  " colorscheme desert
-  :hi SpellBad ctermfg=Black guifg=Black
-endif
-
-
-"" Only do this part when compiled with support for autocommands.
-if has("autocmd")
-"
-"  " Enable file type detection.
-"  " Use the default filetype settings, so that mail gets 'tw' set to 72,
-"  " 'cindent' is on in C files, etc.
-"  " Also load indent files, to automatically do language-dependent indenting.
-  filetype plugin indent on
-"
-"  " Put these in an autocmd group, so that we can delete them easily.
-  augroup vimrcEx
-  au!
-"
-"  " For all text files set 'textwidth' to 78 characters.
-"  autocmd FileType text setlocal textwidth=78
-"
-"  " When editing a file, always jump to the last known cursor position.
-"  " Don't do it when the position is invalid or when inside an event handler
-"  " (happens when dropping a file on gvim).
-  autocmd BufReadPost *
-    \ if line("'\"") >= 1 && line("'\"") <= line("$") |
-    \   exe "normal! g`\"" |
-    \ endif
-
-  augroup END
-
-else
-  set autoindent		" always set autoindenting on
-
-endif " has("autocmd")
-
-"" Convenient command to see the difference between the current buffer and the
-"" file it was loaded from, thus the changes you made.
-"" Only define it when not defined already.
-"if !exists(":DiffOrig")
-"  command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
-"		  \ | wincmd p | diffthis
-"endif
-"
-"if has('langmap') && exists('+langnoremap')
-"  " Prevent that the langmap option applies to characters that result from a
-"  " mapping.  If unset (default), this may break plugins (but it's backward
-"  " compatible).
-"  set langnoremap
-"endif
-
-" Search down into subfolders
-" Provides tab-completion for all file-related tasks
-set path+=**
-
-" Display all matching files when we tab complete
-set wildmenu
-
-" Better file browsing
-let g:netrw_banner=0        " disable annoying banner
-let g:netrw_browse_split=4  " open in prior window
-let g:netrw_altv=1          " open splits to the right
-let g:netrw_liststyle=3     " tree view
-let g:netrw_list_hide=netrw_gitignore#Hide()
-let g:netrw_list_hide.=',\(^\|\s\s\)\zs\.\S\+'
-
-
-map <F2> :tabnew
-map <F3> :tabprevious<CR>
-map <F4> :tabnext<CR>
-"
-"" Show Line Numbers
-set relativenumber
-set complete=.,b,u,]
-set wildmode=longest,list:longest
-set completeopt=menu,preview
-"
-"" Directories
-set backupdir=~/.vim/backup
-set undodir=~/.vim/undodir
-set viewdir=~/.vim/views
-set directory=~/.vim/swap
-"
-"" Spell Check
-set spell spelllang=en_us
-"
-"" Strips whitespace
-nnoremap <leader>W :%s/\s\+$//<cr>:let @/=''<CR>
-"
-"" Whitespace fixes
-highlight ExtraWhitespace ctermbg=red guibg=red
-
-match ExtraWhitespace /\s\+$/
-autocmd BufWinEnter * match ExtraWhitespace /\s\+$/
-autocmd InsertEnter * match ExtraWhitespace /\s\+\%#\@<!$/
-autocmd InsertLeave * match ExtraWhitespace /\s\+$/
-autocmd BufWinLeave * call clearmatches()
-"
-"
-"" For tab characters that appear 4-spaces-wide
-"set tabstop=4
-"" If you're using actual tab character in your source code you probably also 
-"" want these settings (these are actually the defaults,set them defensively):
-"set softtabstop=0 noexpandtab
-"" Finally, if you want an indent to correspond to a single tab, you should also use:
-""set shiftwidth=4
-"" For indents that consist of 4 space characters but are entered with the tab key:
-set tabstop=8 softtabstop=0 expandtab shiftwidth=4 smarttab
-"set list
-"" set past gives problems with tabs
-"" set paste
-""
diff --git a/tools/conf/etc/skel/.xinitrc b/tools/conf/etc/skel/.xinitrc
deleted file mode 100644
index 379a315..0000000
--- a/tools/conf/etc/skel/.xinitrc
+++ /dev/null
@@ -1,13 +0,0 @@
-#xrandr --output eDP1 --mode 1024x768
-#xrandr -s 1366x768
-#xrandr --dpi 73
-#xrandr --dpi 96
-#xgamma -gamma 0.8
-setxkbmap dvorak
-#syndaemon -d
-#
-## Start the window manager
-
-#exec openbox-session
-#exec start-mate
-exec spectrwm
diff --git a/tools/dnsmasq.html b/tools/dnsmasq.html
index 7c923dd..4d738e4 100644
--- a/tools/dnsmasq.html
+++ b/tools/dnsmasq.html
@@ -83,9 +83,9 @@
         <a href="index.html">Tools Index</a>
 
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
     </body>
 </html>
diff --git a/tools/fail2ban.html b/tools/fail2ban.html
deleted file mode 100644
index 38be371..0000000
--- a/tools/fail2ban.html
+++ /dev/null
@@ -1,54 +0,0 @@
-<!DOCTYPEhtml>
-<htmldir="ltr" lang="en">
-   <head>
-       <meta charset='utf-8'>
-       <title>Fail2ban</title>
-   </head>
-   <body>
-
-       <a href="index.html">Tools Index</a>
-
-       <h1>Fail2ban</h1>
-
-       <pre>
-       $ prt-get depinst fail2ban
-       </pre>
-
-       <h2 id="conf">1. Configure</h2>
-
-       <p>To start fail2ban at next boot edit /etc/rc.conf and add fail2ban.
-       Fail2ban will verify if /etc/fail2ban/jail.local exist, if exist will
-       use it. Copy distribution jail.conf to jail.locol;</p>
-
-       <pre>
-       $ sudo cp /etc/fail2ban/jail.conf /etc/fail2ban/jail.local
-       </pre>
-
-       <p>Edit /etc/fail2ban/jail.local, example configuration;</p>
-
-       <pre>
-       [ssh-iptables]
-
-       enabled  = enable
-       filter   = sshd
-       action   = iptables[name=SSH, port=ssh, protocol=tcp]
-                  sendmail-whois[name=SSH, dest=admin@box, sender=fail2ban@box, sendername="fail2ban"]
-                  logpath  = /var/log/auth
-                  maxretry = 5
-       </pre>
-
-       <p>Test a filter</p>
-
-        <pre>
-        # fail2ban-regex /var/log/iptables iptables-ssh.conf
-        </pre>
-
-        <a href="index.html">Tools Index</a>
-
-        <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
-        See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
-    </body>
-</html>
diff --git a/tools/gitolite.html b/tools/gitolite.html
index ea07129..fd9ad8c 100644
--- a/tools/gitolite.html
+++ b/tools/gitolite.html
@@ -826,9 +826,9 @@
         </pre>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/gnupg.html b/tools/gnupg.html
index 89dfe84..a0da5d2 100644
--- a/tools/gnupg.html
+++ b/tools/gnupg.html
@@ -51,7 +51,7 @@
 
         <pre>
         $ gpg2 --full-gen-key
-        gpg (GnuPG) 2.1.11; Copyright (C) 2020 Free Software Foundation, Inc.
+        gpg (GnuPG) 2.1.11; Copyright (C) 2021 Free Software Foundation, Inc.
         This is free software: you are free to change and redistribute it.
         There is NO WARRANTY, to the extent permitted by law.
 
@@ -295,9 +295,9 @@
         <a href="index.html">Tools Index</a>
 
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
     </body>
 </html>
diff --git a/tools/index.html b/tools/index.html
index 2724a6f..dd73571 100644
--- a/tools/index.html
+++ b/tools/index.html
@@ -14,6 +14,7 @@
 	<h2>System Tools</h2>
 
 	<ul>
+            <li><a href="tmux.html">Tmux</a></li>
 	    <li><a href="tar.html">Tar</a>
 		<ul>
 		    <li><a href="tar.html#tarbkup">1. Create Backup</a></li>
@@ -68,55 +69,6 @@
 	    <li><a href="x.html">X</a></li>
 	</ul>
 
-	<h2>System Administration</h2>
-
-	<ul>
-	    <li><a href="network.html">Network Tools</a>
-		<ul>
-		    <li><a href="dnsmasq.html">Dnscrypt and Dnsmasq</a></li>
-		    <li><a href="tcpdump.html">Tcpdump</a></li>
-		    <li><a href="nmap.html">Nmap</a></li>
-		    <li><a href="wireless.html">Wireless</a></li>
-		</ul>
-	    </li>
-	    <li><a href="storage.html">Storage</a>
-		<ul>
-		    <li><a href="storage.html#fsck">1. Maintenance</a></li>
-		    <li><a href="storage.html#mv">2. Moving data</a></li>
-		    <li><a href="storage.html#resize">2. Resize</a></li>
-		</ul>
-	    </li>
-	    <li><a href="lvm.html">LVM</a>
-		<ul>
-		    <li><a href="lvm.html#lvmpart">1. LVM partition</a></li>
-		    <li><a href="lvm.html#pv">2. Create physical volume</a></li>
-		    <li><a href="lvm.html#vg">3. Create volume group</a></li>
-		    <li><a href="lvm.html#lv">4. Create logical volume</a></li>
-		    <li><a href="lvm.html#fsck">5. Maintenance</a></li>
-		</ul>
-	    </li>
-	    <li><a href="syslog-ng.html">Syslog-ng</a>
-		<ul>
-		    <li><a href="syslog-ng.html#install">Install syslog-ng</a></li>
-		    <li><a href="syslog-ng.html#configure">Configure syslog-ng</a></li>
-		    <li><a href="logrotate.html">Logrotate</a></li>
-		    <li><a href="logwatch.html">Logwatch</a>
-			<ul>
-			    <li><a href="logwatch.html#conf">Configure Logwatch</a></li>
-			    <li><a href="logwatch.html#cron">Set cron task</a></li>
-			</ul>
-		    </li>
-
-		</ul>
-	    </li>
-	    <li><a href="fail2ban.html">Fail2Ban</a>
-		<ul>
-		    <li><a href="fail2ban.html#conf">Configure Fail2ban</a></li>
-		</ul>
-	    </li>
-
-	</ul>
-
 	<h2>Network Services</h2>
 	<ul>
 	    <li><a href="qemu.html">Qemu</a>
@@ -145,6 +97,7 @@
 		    <li><a href="nginx.html#logs">6. Logs</a></li>
 		</ul>
 	    </li>
+	    <li><a href="httpd.html">Nginx</a>
 	    <li><a href="gitolite.html">Gitolite</a>
 		<ul>
 		    <li><a href="gitolite.html#install">1. Install Gitolite</a></li>
@@ -200,9 +153,9 @@
 	<a href="../index.html">Documentation Index</a>
 
 	<p>
-	This is part of the Tribu System Documentation.
-	Copyright (C) 2020
-	Tribu Team.
+	This is part of the LeetIO System Documentation.
+	Copyright (C) 2021
+	LeetIO Team.
 	See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
 	for copying conditions.</p>
     </body>
diff --git a/tools/irssi.html b/tools/irssi.html
index bcf714e..fc958d7 100644
--- a/tools/irssi.html
+++ b/tools/irssi.html
@@ -57,9 +57,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/logrotate.html b/tools/logrotate.html
index fc07169..4f58aa1 100644
--- a/tools/logrotate.html
+++ b/tools/logrotate.html
@@ -361,9 +361,9 @@
         # logrotate -f /etc/logrotate.conf
         </pre>
 
-        <p>This is part of the Tribu System Documentation.
-Copyright (C) 2020
-Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+Copyright (C) 2021
+LeetIO Team.
 See the file <a href="fdl-1.3-standalone.html">Gnu Free Documentation License</a>
 for copying conditions.</p>
 
diff --git a/tools/logwatch.html b/tools/logwatch.html
index 20d1801..9718763 100644
--- a/tools/logwatch.html
+++ b/tools/logwatch.html
@@ -129,9 +129,9 @@
         <a href="index.html">Tools Index</a>
 
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
     </body>
 </html>
diff --git a/tools/lvm.html b/tools/lvm.html
index 4e25b10..211b181 100644
--- a/tools/lvm.html
+++ b/tools/lvm.html
@@ -158,9 +158,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/lynx.html b/tools/lynx.html
index b26e660..f800fcc 100644
--- a/tools/lynx.html
+++ b/tools/lynx.html
@@ -16,7 +16,7 @@
         <pre>
         # Description: Text-based web browser.
         # URL: http://lynx.isc.org/
-        # Packager: Tribu Team, silvino at bk dot ru
+        # Packager: LeetIO Team, silvino at bk dot ru
         # Depends on: ncurses openssl zlib
 
         name=lynx
@@ -51,9 +51,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/mutt.html b/tools/mutt.html
index 7edac42..4cb5599 100644
--- a/tools/mutt.html
+++ b/tools/mutt.html
@@ -311,9 +311,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/network.html b/tools/network.html
index 2079cca..080ba05 100644
--- a/tools/network.html
+++ b/tools/network.html
@@ -11,7 +11,7 @@
         <h1>Network Tools</h1>
 
         <p>This document extend
-        <a href="../core/network.html">core network</a>,
+        <a href="../linux/network.html">core network</a>,
         that cover the most common environments, with
         virtual networks and bridges.</p>
 
@@ -58,12 +58,12 @@
         </pre>
 
         <p>Change iptables init script
-        <a href="../core/conf/rc.d/iptables">/etc/rc.d/iptables</a>
+        <a href="../linux/conf/rc.d/iptables">/etc/rc.d/iptables</a>
         and set TYPE to bridge,
-        <a href="../core/conf/iptables/bridge.v4">/etc/iptables/bridge.v4</a>.
+        <a href="../linux/conf/iptables/bridge.v4">/etc/iptables/bridge.v4</a>.
         Now change
-        <a href="../core/conf/iptables/ipt-conf.sh">ipt-conf.sh</a>
-        and <a href="../core/conf/iptables/ipt-bridge.sh">ipt-bridge.sh</a>
+        <a href="../linux/conf/iptables/ipt-conf.sh">ipt-conf.sh</a>
+        and <a href="../linux/conf/iptables/ipt-bridge.sh">ipt-bridge.sh</a>
         with your network configuration and run;
         </p>
 
@@ -72,9 +72,9 @@
         </pre>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
 
diff --git a/tools/nginx.html b/tools/nginx.html
index 937be15..32685b9 100644
--- a/tools/nginx.html
+++ b/tools/nginx.html
@@ -446,9 +446,9 @@
 
         <a href="index.html">Tools Index</a>
 
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/openssh.html b/tools/openssh.html
index c44a934..aab5218 100644
--- a/tools/openssh.html
+++ b/tools/openssh.html
@@ -128,7 +128,7 @@
         <h3 id="iptables">1.2. Configure iptables</h3>
         <p>Iptables;</p>
 
-        <p>Example of <a href="../core/scripts/iptables.sh">iptables.sh</a></p>
+        <p>Example of <a href="../linux/scripts/iptables.sh">iptables.sh</a></p>
 
         <pre>
         $IPT -A INPUT  -i ${PUB_IF} -p tcp --dport 2222 --sport 1024:65535 -m state --state ESTABLISHED -j ACCEPT
@@ -315,9 +315,9 @@
         </pre>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
 
diff --git a/tools/postgresql.html b/tools/postgresql.html
index f27b7d4..a87c0b9 100644
--- a/tools/postgresql.html
+++ b/tools/postgresql.html
@@ -350,9 +350,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/qemu.html b/tools/qemu.html
index b8b462b..44f48ae 100644
--- a/tools/qemu.html
+++ b/tools/qemu.html
@@ -43,7 +43,7 @@
         this describes how to create a qcow2 type;</p>
 
         <pre>
-        $ qemu-img create -f qcow2 crux-img.qcow2 15G
+        $ qemu-img create -f qcow2 crux-img.qcow2 20G
         </pre>
 
         <h3 id="mount">2.1. Mount images</h3>
@@ -57,7 +57,7 @@
         </pre>
 
         <p>Information about preparing
-        <a href="../core/install.html#step2">partitions</a>
+        <a href="../linux/install.html#step2">partitions</a>
         and <a href="storage.html">storage</a> administration.
         You can use image as a normal disk, example how
         to use parted to create a gpt system table;</p>
@@ -68,19 +68,15 @@
 	     unit mib \
 	     mkpart primary 2 4 \
 	     name 1 grub \
-	     mkpart ESP fat32 4 128 \
+	     mkpart ESP fat32 4 132 \
 	     name 2 efi \
-	     mkpart primary ext4 128 1128 \
+	     mkpart primary ext4 132 1132 \
 	     name 3 boot \
-	     mkpart primary ext4 1128 12128 \
-	     name 4 root \
-	     mkpart primary ext4 12128 14128 \
-	     name 5 var \
-	     mkpart primary ext4 14128 100% \
-	     name 6 lvm \
+	     mkpart primary 1132 100% \
+	     name 4 lvm \
 	     set 1 bios_grub on \
 	     set 2 boot on \
-	     set 6 lvm on
+             set 4 lvm on
         </pre>
 
         <pre>
@@ -90,11 +86,19 @@
         <p>Use /dev/mapper/$(name_of_device) to assign correct blocks;</p>
 
         <pre>
+	pvcreate           /dev/mapper/${DEV_NAME}p4
+        vgcreate vg_system /dev/mapper/${DEV_NAME}p4
+        lvcreate -L 15G -n lv_root vg_system
+        lvcreate -L 2G -n lv_var vg_system
+        lvcreate -l 100%FREE -n lv_home vg_system
+        </pre>
+
+        <pre>
 	mkfs.fat -F 32  /dev/mapper/${DEV_NAME}p2
 	mkfs.ext4       /dev/mapper/${DEV_NAME}p3
-	mkfs.ext4       /dev/mapper/${DEV_NAME}p4
-	mkfs.ext4       /dev/mapper/${DEV_NAME}p5
-	pvcreate        /dev/mapper/${DEV_NAME}p6
+	mkfs.ext4       /dev/vg_system/lv_root
+	mkfs.ext4       /dev/vg_system/lv_var
+	mkfs.ext4       /dev/vg_system/lv_home
         </pre>
 
 	<p>Read <a href="lvm.html">lvm</a> documentation on how to setup
@@ -103,7 +107,7 @@
         <p>Mount partition;</p>
 
         <pre>
-	mount /dev/mapper/${DEV_NAME}p4 $CHROOT
+	mount /dev/vg_system/
 	mkdir -p $CHROOT/proc
 	mkdir -p $CHROOT/sys
 	mkdir -p $CHROOT/dev
@@ -401,9 +405,9 @@
         </pre>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/scripts/mirror-system b/tools/scripts/mirror-system
deleted file mode 100755
index 5700d85..0000000
--- a/tools/scripts/mirror-system
+++ /dev/null
@@ -1,71 +0,0 @@
-#!/bin/bash
-
-if [ -f /tmp/mirror ]; then
-	echo "mirror system is already running"
-	exit 0
-fi
-
-touch /tmp/mirror
-
-#BUILD_NAME="R2D9"
-#BUILD_TITLE="${BUILD_NAME}-$(cat /usr/ports/releases/stable/metadata/build-version)"
-BUILD_TITLE="Crux 3.5"
-
-# Update system
-#ports -u
-
-# make them look like updated
-echo "touch packages..."
-for package in /usr/ports/packages/*; do
-	touch ${package};
-done
-
-# make sure permissions are right
-echo "chown pkgmk:pkgmk -R /usr/ports"
-chown pkgmk:pkgmk -R /usr/ports
-
-#echo "update system"
-#prt-get depinst $(prt-get listinst | xargs prt-get quickdep)
-#prt-get sysup
-#prt-get update -fr $(revdep)
-#
-# Create list of installed packages
-echo "creating list of installed..."
-rm -r /usr/ports/installed
-pkg_installed
-
-### clean distribution files
-mv /usr/ports/distfiles/* /usr/ports/archive/distfiles
-### clean packages files
-mv /usr/ports/packages/* /usr/ports/archive/packages
-### get sources and packages
-cd /usr/ports/installed
-for installed in *; do
-        prt-get path $installed | while read -r line; do
-		cd $line
-		##get source
-	        sudo -u pkgmk -g pkgmk pkgmk -do
-		#make sure package exists
-		current="${installed}#$(prt-get current ${installed}).pkg.tar.gz"
-		echo "checking $current ..."
-		cp /usr/ports/archive/packages/${current} /usr/ports/packages/
-		#prt-get update $installed
-        done
-done
-
-# Create repository
-echo "creating repository"
-cd /usr/ports/packages
-pkg-repgen
-
-# Create mirror page
-echo "creating mirror index page"
-portspage --title=${BUILD_TITLE} /usr/ports/installed > /usr/ports/installed/index.html
-
-sed -i "s@usr\/ports\/installed@mirror/installed@g" /usr/ports/installed/index.html
-
-echo "setting permissions /usr/ports"
-chown pkgmk:pkgmk -R /usr/ports
-
-# Remove temporary file
-rm /tmp/mirror
diff --git a/tools/scripts/pkgmk-test.conf b/tools/scripts/pkgmk-test.conf
deleted file mode 100644
index 4a04eec..0000000
--- a/tools/scripts/pkgmk-test.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# /etc/pkgmk.conf: pkgmk(8) configuration
-#
-
-source /etc/pkgmk.conf
-
-#PKGMK_SOURCE_MIRRORS=(http://c1.ank/distfiles/)
-PKGMK_SOURCE_DIR="$PWD"
-PKGMK_PACKAGE_DIR="$PWD"
-PKGMK_WORK_DIR="$PWD/work"
-PKGMK_DOWNLOAD="yes"
-PKGMK_UP_TO_DATE="no"
-# PKGMK_IGNORE_FOOTPRINT="no"
-# PKGMK_IGNORE_NEW="no"
-# PKGMK_NO_STRIP="no"
-# PKGMK_DOWNLOAD_PROG="wget"
-# PKGMK_WGET_OPTS=""
-# PKGMK_CURL_OPTS=""
-# PKGMK_COMPRESSION_MODE="gz"
diff --git a/tools/scripts/pkgmk-test.sh b/tools/scripts/pkgmk-test.sh
deleted file mode 100644
index 4cfe2c3..0000000
--- a/tools/scripts/pkgmk-test.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/bash
-DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
-CONF=${DIR}/pkgmk-test.conf
-echo "pkgmk -cf $CONF -d -is $1"
-fakeroot pkgmk -cf $CONF -d -is $1
diff --git a/tools/scripts/replace.sh b/tools/scripts/replace.sh
deleted file mode 100755
index 8d5d8d9..0000000
--- a/tools/scripts/replace.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# find and replace string on files
-folder=$1
-oldstring=$2
-newstring=$3
-
-#grep -rl $oldstring $folder | xargs sed -i s@$oldstring@$newstring@g
-grep -rl "$oldstring" $folder | xargs sed -i "s@$oldstring@$newstring@g"
diff --git a/tools/scripts/runvm/c12-dvd b/tools/scripts/runvm/c12-dvd
deleted file mode 100644
index 9cbf201..0000000
--- a/tools/scripts/runvm/c12-dvd
+++ /dev/null
@@ -1,15 +0,0 @@
-export QEMU_AUDIO_DRV=alsa
-
-memory=1024
-
-boot=c
-
-iso=iso/devuan_jessie_1.0.0_amd64_CD.iso
-
-image=img/c12-dvd.qcow2
-
-tap="tap2"
-
-mac="54:60:be:ef:5c:72"
-
-other="-soundhw hda -vga std -display sdl -usb -device usb-ehci  -device usb-host,vendorid=0x13d3,productid=0x5652"
diff --git a/tools/scripts/runvm/profile/crux b/tools/scripts/runvm/profile/crux
deleted file mode 100644
index 672b80d..0000000
--- a/tools/scripts/runvm/profile/crux
+++ /dev/null
@@ -1,7 +0,0 @@
-mac="54:60:be:ef:5c:64"
-memory=1024
-boot=$2
-tap="tap4"
-iso=iso/crux-3.4.iso
-image=img/c14.qcow2
-other="-vga std -display sdl"
diff --git a/tools/scripts/runvm/runvm.sh b/tools/scripts/runvm/runvm.sh
deleted file mode 100644
index 21cd097..0000000
--- a/tools/scripts/runvm/runvm.sh
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-function rmac_addr (){
-printf '54:60:BE:EF:%02X:%02X\n' $((RANDOM%256)) $((RANDOM%256))
-}
-
-source profile/$1
-
-#mac=$(rmac_addr)
-#memory=1024
-#boot=d
-#tap="tap1"
-#iso=iso/crux-3.4.iso
-#image=img/crux-standard.qcow2
-#other="-soundhw hda -vga std -display sdl"
-
-qemu-system-x86_64 \
-    -enable-kvm \
-    -m ${memory} \
-    -boot ${boot} \
-    -cdrom ${iso} \
-    -hda ${image} \
-    -device e1000,netdev=t0,mac=${mac} \
-    -netdev tap,id=t0,ifname=${tap},script=no,downscript=no \
-    ${other} \
-    &
diff --git a/tools/scripts/setup-gitolite.sh b/tools/scripts/setup-gitolite.sh
deleted file mode 100644
index c42db14..0000000
--- a/tools/scripts/setup-gitolite.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-
-# First we define the function
-ConfirmOrExit ()
-{
-    while true
-    do
-        echo -n "Please confirm (y or n) :"
-        read CONFIRM
-        case $CONFIRM in
-            y|Y|YES|yes|Yes) break ;;
-            n|N|no|NO|No)
-                echo "Aborting - you entered $CONFIRM"
-                exit
-                ;;
-            *) echo "Please enter only y or n"
-        esac
-    done
-    echo "You entered $CONFIRM. Continuing ..."
-}
-
-
-# Absolute path to this script, e.g. /home/user/bin/foo.sh
-SCRIPT=$(readlink -f "$0")
-# Absolute path this script is in, thus /home/user/bin
-SCRIPTPATH=$(dirname "$SCRIPT")
-
-DIR=$(dirname "$SCRIPTPATH");
-DIR_CONF=$DIR"/conf"
-
-echo "SCRIPT=$SCRIPT";
-echo "SCRIPTPATH=$SCRIPTPATH";
-echo "DIR=$DIR";
-echo "DIR_CONF=$DIR_CONF";
-ConfirmOrExit
-
-    prt-get depinst gitolite
-
-    mkdir -p /srv/gitolite
-    useradd -U -d /srv/gitolite gitolite
-    chown gitolite:gitolite /srv/gitolite
-
-exit 0;
diff --git a/tools/scripts/setup-nginx.sh b/tools/scripts/setup-nginx.sh
deleted file mode 100644
index 11065d2..0000000
--- a/tools/scripts/setup-nginx.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/sh
-
-#. `dirname $0`/config-install.sh
-#
-#prt-get depinst nginx
-#
-#cp -R $CONF_DIR/etc/nginx/* /etc/nginx/
-#
-#mkdir /srv/www
-#chown www:www /srv/www
-#
-#usermod -a -g www nginx
-#usermod -m -d /srv/www nginx
-
-openssl genrsa -des3 -out /etc/ssl/keys/nginx.key 2048
-openssl req -new -key /etc/ssl/keys/nginx.key -out /etc/ssl/certs/nginx.csr
-openssl x509 -req -days 365 \
-            -in /etc/ssl/certs/nginx.csr \
-            -signkey /etc/ssl/keys/nginx.key \
-            -out /etc/ssl/certs/nginx.crt
-
-cp /etc/ssl/keys/nginx.key /etc/ssl/keys/nginx.key.pass
-openssl rsa -in /etc/ssl/keys/nginx.key.pass -out /etc/ssl/keys/nginx.key
-
diff --git a/tools/scripts/setup-openssh.sh b/tools/scripts/setup-openssh.sh
deleted file mode 100644
index 14afe8b..0000000
--- a/tools/scripts/setup-openssh.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-
-# First we define the function
-ConfirmOrExit ()
-{
-    while true
-    do
-        echo -n "Please confirm (y or n) :"
-        read CONFIRM
-        case $CONFIRM in
-            y|Y|YES|yes|Yes) break ;;
-            n|N|no|NO|No)
-                echo "Aborting - you entered $CONFIRM"
-                exit
-                ;;
-            *) echo "Please enter only y or n"
-        esac
-    done
-    echo "You entered $CONFIRM. Continuing ..."
-}
-
-
-# Absolute path to this script, e.g. /home/user/bin/foo.sh
-SCRIPT=$(readlink -f "$0")
-# Absolute path this script is in, thus /home/user/bin
-SCRIPTPATH=$(dirname "$SCRIPT")
-
-DIR=$(dirname "$SCRIPTPATH");
-DIR_CONF=$DIR"/conf"
-
-echo "SCRIPT=$SCRIPT";
-echo "SCRIPTPATH=$SCRIPTPATH";
-echo "DIR=$DIR";
-echo "DIR_CONF=$DIR_CONF";
-ConfirmOrExit
-
-
-    #installer overwrite system init script
-    cp -R $DIR_CONF/etc/ssh/sshd_config /etc/ssh/sshd_config
-
-    sh /etc/rc.d/sshd start
-
-exit 0;
diff --git a/tools/scripts/setup-php.sh b/tools/scripts/setup-php.sh
deleted file mode 100644
index 4c28173..0000000
--- a/tools/scripts/setup-php.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-. `dirname $0`/config-install.sh
-
-prt-get depinst php php-fpm php-gd php-pdo-pgsql php-postgresql
-
-cp /etc/php/php.ini-development /etc/php/php.ini
diff --git a/tools/scripts/setup-postgresql.sh b/tools/scripts/setup-postgresql.sh
deleted file mode 100644
index 4e1ee3a..0000000
--- a/tools/scripts/setup-postgresql.sh
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/sh
-
-# First we define the function
-ConfirmOrExit ()
-{
-    while true
-    do
-        echo -n "Please confirm (y or n) :"
-        read CONFIRM
-        case $CONFIRM in
-            y|Y|YES|yes|Yes) break ;;
-            n|N|no|NO|No)
-                echo "Aborting - you entered $CONFIRM"
-                exit
-                ;;
-            *) echo "Please enter only y or n"
-        esac
-    done
-    echo "You entered $CONFIRM. Continuing ..."
-}
-
-
-# Absolute path to this script, e.g. /home/user/bin/foo.sh
-SCRIPT=$(readlink -f "$0")
-# Absolute path this script is in, thus /home/user/bin
-SCRIPTPATH=$(dirname "$SCRIPT")
-
-DIR=$(dirname "$SCRIPTPATH");
-DIR_CONF=$DIR"/conf"
-
-echo "SCRIPT=$SCRIPT";
-echo "SCRIPTPATH=$SCRIPTPATH";
-echo "DIR=$DIR";
-echo "DIR_CONF=$DIR_CONF";
-ConfirmOrExit
-
-IS_INSTALL=$(prt-get isinst postgresql);
-echo $IS_INSTALL;
-if [ "$IS_INSTALL" = "package postgresql is installed" ]
-then
-    echo "updating postgresql"
-    OLD_VERSION=$(prt-get current postgresql);
-    echo $OLD_VERSION;
-
-    sudo -u postgres pg_dumpall > /srv/pgsql/dump-$OLD_VERSION.sql
-
-    sh /etc/rc.d/postgresql stop
-
-    #extra backup, in case ...
-    tar --xattrs -zcpf /srv/pgsql/data-$OLD_VERSION.tar.gz \
-                    --directory=/srv/pgsql/data .
-
-    rm -R /srv/pgsql/data
-
-    prt-get update postgresql
-
-    NEW_VERSION=$(prt-get current postgresql);
-    echo $NEW_VERSION;
-
-    sudo -u postgres initdb -D /srv/pgsql/data
-
-    rejmerge
-    #installer overwrite system init script
-    cp -R $DIR_CONF/etc/rc.d/postgresql /etc/rc.d/
-
-    sh /etc/rc.d/postgresql start
-    sleep 5
-
-    sudo -u postgres psql -d postgres -f /srv/pgsql/dump-$OLD_VERSION.sql
-
-else
-    echo "install postgresql and dependencies"
-    prt-get depinst postgresql
-
-    cp -R $DIR_CONF/etc/rc.d/postgresql /etc/rc.d/
-
-    mkdir /srv/pgsql/
-    touch /var/log/postgresql
-    chown postgres:postgres /srv/pgsql /var/log/postgresql
-
-    sudo -u postgres initdb -D /srv/pgsql/data
-
-    cp $DIR_CONF/srv/pgsql/data/pg_hba.conf /srv/pgsql/data/
-    chown postgres:postgres /srv/pgsql/data/pg_hba.conf
-fi
-
-exit 0;
diff --git a/tools/scripts/setup-x.sh b/tools/scripts/setup-x.sh
deleted file mode 100644
index 262b4dd..0000000
--- a/tools/scripts/setup-x.sh
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/bash
-
-# Absolute path to this script, e.g. /home/user/bin/foo.sh
-SCRIPT=$(readlink -f "$0")
-# Absolute path this script is in, thus /home/user/bin
-SCRIPTPATH=$(dirname "$SCRIPT")
-
-DIR=$(dirname "$SCRIPTPATH");
-DIR_CONF=$DIR"/conf"
-
-
-
-prt-get depinst xorg-server \
-	xorg-xinit \
-	xorg-xrdb \
-	xorg-xdpyinfo \
-	xorg-xauth \
-	xorg-xmodmap \
-	xorg-xrandr \
-	xorg-xgamma \
-	xorg-xf86-input-evdev \
-	xorg-xf86-input-synaptics \
-	xsel \
-	xkeyboard-config
-
-prt-get depinst xorg-font-util \
-	xorg-font-alias \
-	xorg-font-dejavu-ttf \
-	xorg-font-cursor-misc \
-	xorg-font-misc-misc \
-	console-font-terminus \
-	xorg-font-terminus \
-	xorg-font-mutt-misc
-
-prt-get search xorg-font-bitstream | xargs sudo prt-get depinst
-prt-get search xorg-font-bh | xargs sudo prt-get depinst
-
-#prt-get search otf- | xargs sudo prt-get depinst
-#prt-get depinst otf-sourcecode
-
-prt-get depinst \
-            alsa-utils \
-            libdrm \
-            mesa3d \
-            ffmpeg \
-            gstreamer \
-            gstreamer-vaapi \
-            gst-plugins-base \
-            gst-plugins-good \
-            gst-plugins-bad \
-            gst-plugins-ugly \
-            cmus \
-            dmenu \
-            st \
-            gparted \
-            gimp \
-            libreoffice \
-            ca-certificates \
-            linux-pam \
-            gstreamer \
-            libgd \
-            icu \
-            syndaemon \
-	    firefox
-
-prt-get depinst \
-	openbox \
-	dwm \
-       	spectrwm \
-	mate
-
-ConfirmOrExit () {
-    while true
-    do
-        echo -n "Please confirm (y or n) :"
-        read CONFIRM
-        case $CONFIRM in
-            y|Y|YES|yes|Yes) break ;;
-            n|N|no|NO|No)
-                echo "Aborting - you entered $CONFIRM"
-                exit
-                ;;
-            *) echo "Please enter only y or n"
-        esac
-    done
-    echo "You entered $CONFIRM. Continuing ..."
-}
-
-echo "SCRIPT=$SCRIPT";
-echo "SCRIPTPATH=$SCRIPTPATH";
-echo "DIR=$DIR";
-echo "DIR_CONF=$DIR_CONF";
-ConfirmOrExit
-
-cp -R $DIR_CONF/etc/X11/* /etc/X11/
-
diff --git a/tools/squid.html b/tools/squid.html
index 25fb12e..d19494a 100644
--- a/tools/squid.html
+++ b/tools/squid.html
@@ -65,9 +65,9 @@ ssl_bump bump all
         </pre>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
 
diff --git a/tools/storage.html b/tools/storage.html
index 430b735..03e24ef 100644
--- a/tools/storage.html
+++ b/tools/storage.html
@@ -149,9 +149,9 @@
 
         <a href="index.html">Tools Index</a>
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
     </body>
diff --git a/tools/syslog-ng.html b/tools/syslog-ng.html
index 70dc994..f192fa5 100644
--- a/tools/syslog-ng.html
+++ b/tools/syslog-ng.html
@@ -374,9 +374,9 @@
 
         <a href="index.html">Tools Index</a>
 
-        <p>This is part of the Tribu System Documentation.
-Copyright (C) 2020
-Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+Copyright (C) 2021
+LeetIO Team.
 See the file <a href="fdl-1.3-standalone.html">Gnu Free Documentation License</a>
 for copying conditions.</p>
 
diff --git a/tools/tar.html b/tools/tar.html
index dfcd3a0..02c7c73 100644
--- a/tools/tar.html
+++ b/tools/tar.html
@@ -15,7 +15,7 @@
         <p>To create a simple compressed tar;</p>
 
         <pre>
-        $ tar -czvf tar_name.tar.gz /path/to/archive
+        $ tar -czpvf tar_name.tar.gz /path/to/archive
         </pre>
 
         <p>Script
@@ -122,9 +122,9 @@
         <a href="index.html">Tools Index</a>
 
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
     </body>
 </html>
diff --git a/tools/tmux.html b/tools/tmux.html
new file mode 100644
index 0000000..c00b046
--- /dev/null
+++ b/tools/tmux.html
@@ -0,0 +1,118 @@
+<!DOCTYPE html>
+<html dir="ltr" lang="en">
+    <head>
+        <meta charset='utf-8'>
+        <title>2.5.3. Tmux</title>
+    </head>
+
+    <body>
+
+        <a href="index.html">GNU/Linux Index</a>
+        <h1 id="tmux">2.5.3. Tmux</h1>
+
+        <p>Install tmux, improves cli work efficiency;</p>
+
+        <pre>
+        $ sudo prt-get depinst tmux
+        </pre>
+
+        <p>Create skeleton configuration file for users;</p>
+
+        <pre>
+        $ sudo vim /etc/skel/.tumx.conf
+        </pre>
+
+        <pre>
+        set -g default-terminal "screen-256color"
+
+        set-window-option -g mode-keys vi
+
+        # Vim style
+        # copy tmux's selection buffer into the primary X selection with PREFIX+CTRL+Y
+        bind-key u run "tmux save-buffer - | xsel -ib"
+        # copy primary X selection into tmux's selection buffer with PREFIX+CTRL+P
+        bind-key e run "xsel -o | tmux load-buffer -"
+
+        bind-key -t vi-copy 'v' begin-selection
+        bind-key -t vi-copy 'y' copy-selection
+
+        set-option -g set-titles on
+        set-option -g set-titles-string '#S> #I.#P #W'
+
+        set -g visual-activity on
+        set -g monitor-activity on
+        set -g visual-bell on
+        set -g bell-action any
+
+        ## Join windows: <prefix> s, <prefix> j
+        bind-key j command-prompt -p "join pane from:"  "join-pane -s '%%'"
+        bind-key s command-prompt -p "send pane to:"  "join-pane -t '%%'"
+        </pre>
+
+        <p>Copy to your current home and start tmux;</p>
+
+        <pre>
+        $ cp /etc/skel/.tmux.conf ~/
+        $ tmux
+        </pre>
+
+        <p>Get help;</p>
+
+        <pre>
+        ctrl + b ?
+        </pre>
+
+        <pre>
+        key = bind-key (default ctrl + b)
+
+        Window
+        key	c   new window
+        key	" 	split-window
+        key	n	next window
+        key	p	previous window
+
+        Panes
+        key	; 	last-pane
+        key	space	next-layout
+        key	!	break-pane
+        key	{	swap pane
+        key	}	swap pane
+        </pre>
+
+        <h2 id="cpypst">2.5.3.1. Copy paste</h2>
+
+        <p>This instructions are valid if tmux.conf file discribed
+        in this document is used;</p>
+
+        <pre>
+        1) enter copy mode using Control+b [
+        2) navigate to beginning of text, you want to select and hit v
+        3) move around using arrow keys to select region
+        4) when you reach end of region simply hit y to copy the region
+        5) now Control+b ] will paste the selection
+        </pre>
+
+        <p>Paste in X with xsel;</p>
+
+        <pre>
+        6) update buffer of xsel using Control+b u
+        </pre>
+
+        <p>Copy from X with xsel;</p>
+
+        <pre>
+        0) update tmux buffer Control+b e
+        </pre>
+
+        <p>Before pasting on vim, set paste mode and then set nopaste.</p>
+
+        <a href="index.html">GNU/Linux Index</a>
+        <p>
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
+        See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
+        for copying conditions.</p>
+
+    </body>
+</html>
diff --git a/tools/vim.html b/tools/vim.html
index b76c111..6d34312 100644
--- a/tools/vim.html
+++ b/tools/vim.html
@@ -267,9 +267,9 @@
 	</dl>
 
         <a href="index.html">Tools Index</a>
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        <p>This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
         for copying conditions.</p>
 
diff --git a/tools/wireless.html b/tools/wireless.html
deleted file mode 100644
index 0696cd5..0000000
--- a/tools/wireless.html
+++ /dev/null
@@ -1,133 +0,0 @@
-<html dir="ltr" lang="en">
-    <head>
-        <meta charset='utf-8'>
-        <title>Wireless</title>
-    </head>
-    <body>
-        <a href="index.html">Tools Index</a>
-
-        <h1>Wireless</h1>
-
-        <h2>Manual configuration</h2>
-
-        <pre>
-        # iwlist wlp2s0 scan
-        # iwconfig wlp2s0 essid name_of_network
-        </pre>
-
-        <p>To get mac address of the target cell;</p>
-
-        <pre>
-        # iwlist wlp2s0 scan
-        </pre>
-
-        <p>Example output that matter;</p>
-
-        <pre>
-        Cell 03 - Address: A8:A6:68:98:0C:C5
-        </pre>
-
-
-        <h4>Recover Password WPS</h4>
-
-        <p>First check processes that interfere with state of the interface and kill them;</p>
-
-        <pre>
-        # airmon-ng check
-
-
-        Found 5 processes that could cause trouble.
-        If airodump-ng, aireplay-ng or airtun-ng stops working after
-        a short period of time, you may want to kill (some of) them!
-
-        PID     Name
-        1271    wpa_supplicant
-        1576    wpa_supplicant
-        1633    dhclient
-        Process with PID 1576 (wpa_supplicant) is running on interface wlan0
-        Process with PID 1633 (dhclient) is running on interface wlan0
-        </pre>
-
-        <p>Pkill or kill all of them, ex 1271;</p>
-
-        <pre>
-        # kill -15 1271
-        </pre>
-
-        <p>If that fails;</p>
-
-        <pre>
-        # kill -9 1271
-        </pre>
-
-        <p>If wireless card is intel;</p>
-
-        <pre>
-        # rmmod iwlmvm
-        # rmmod iwlwifi
-        # modprob iwlwifi
-        </pre>
-
-        <p>Put interface in monitor mode;</p>
-
-        <pre>
-        # iwconfig wlp2s0 mode monitor
-        # ifconfig wlp2s0 up
-        </pre>
-
-        <pre>
-        # airmon-ng start wlp2s0
-
-
-        Interface       Chipset         Driver
-
-        wlp2s0           Intel AC        iwlwifi - [phy1]
-                                        (monitor mode enabled on mon0)
-        </pre>
-
-        <p>Airdump-ng don't report if a router have WPS or not, for that is used wash;</p>
-
-        <pre>
-        # wash -i wlp2s0
-        </pre>
-
-        <p>If the program report "Found packet with bad FCS", run with -C;</p>
-
-        <pre>
-        # wash -C -i wlp2s0
-        </pre>
-
-        <p>Put mon0 on same channel of target cell;</p>
-
-        <pre>
-        # iwconfig mon0 channel 6
-        </pre>
-
-        <p>Start the magic;</p>
-
-        <pre>
-        # reaver -i mon0 -b A8:A6:68:98:0C:C5 -c 6 -vv
-        </pre>
-
-        <p>If BSSID is cloaked, not being broadcasted, provide it to reaver;</p>
-
-        <pre>
-        # reaver -i mon0 -b A8:A6:68:98:0C:C5 -c 6 -e "bssid_name" -vv
-        </pre>
-
-        <p>-a address of access point, -c client to deauthenticate</p>
-
-        <pre>
-        aireplay-ng -0 1 -a 00:14:6C:7E:40:80 -c 00:0F:B5:34:30:30 ath0
-        </pre>
-
-
-        <a href="index.html">Tools Index</a>
-
-        <p>This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
-        See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a>
-        for copying conditions.</p>
-    </body>
-</html>
diff --git a/tools/x.html b/tools/x.html
index 2172a56..0e9a4eb 100644
--- a/tools/x.html
+++ b/tools/x.html
@@ -216,9 +216,9 @@
         <a href="index.html">Tools Index</a>
 
         <p>
-        This is part of the Tribu System Documentation.
-        Copyright (C) 2020
-        Tribu Team.
+        This is part of the LeetIO System Documentation.
+        Copyright (C) 2021
+        LeetIO Team.
         See the file <a href="../fdl-1.3-standalone.html">Gnu Free Documentation License</a> for copying conditions.</p>
     </body>
 </html>